Achieving "immediate delivery" with one of the industry's leading inventory systems! If you're facing difficulties such as "it's hard to consult because it's a cut product...", please feel free to reach out to us.
We meet a variety of needs, from high-grade scrap to low-grade scrap.
We offer a wide range of standards, including AMS and ASTM. Please feel free to contact us for small lot prototypes, research and development, and milling processing, etc.
Introduction of silica with distinctive features that strictly controls its combination and structure by grade!
Silica for rubber reinforcement that improves adhesion to metal surfaces, fibers, and the like.
Import and sale of Chinese-made copper balls (copper anodes for plating) [EBC Co., Ltd.]
We will achieve a consistent production system for high-precision magnesium parts and global procurement.
High strength without heat treatment.
A sheet made entirely of copper fibers, produced with advanced papermaking technology
Just immerse the discolored copper! A copper oxidation film remover that can remove discoloration without damaging the base material.
Quickly sensing changes in society! We are confident in our know-how cultivated through over 45 years of rich experience.
Combines the heat resistance and electromagnetic shielding of stainless steel with the flexibility and processability of paper
Collaboration between cutting-edge systems and our proud production technology.
We can process and supply high-purity titanium in various forms such as powder, pellets, and wire, tailored to your specific needs.
Are you struggling with the discoloration of copper? ASAHI's BT series protects copper from discoloration due to oxidation.
A wide range of sizes from φ0.3 to 7mm. We offer optimal titanium wire suitable for various applications, from pure titanium to various β alloys.
It can be used for noise reduction of various electronic devices, magnetic shielding, and shielded rooms to reduce the effects of environmental magnetic fields near power lines and distribution equipment.
Brass is the most suitable material for cutting.
The most commonly used stainless steel pipe in the world.
![267[2].gif](https://image.mono.ipros.com/public/product/image/747/302370001/IPROS98166395376369251018.gif?w=280&h=280)
Outdoor exposure, excellent abrasion resistance, heat resistance, and chemical resistance in a pre-sensitized aluminum plate. Suitable for serial numbers, variable data, barcodes, and QR codes!
Contributes to improving work efficiency in aluminum casting sites for automotive parts and others. Reduces the occurrence of oxides and significantly decreases the tedious cleaning of the holding chamber. (About once every six months to a year!)
We manufacture precious metal sputtering targets at our own factory. We can accommodate small lots.
In response to many requests, we have added a 4L size of the copper discoloration remover CU-600. It removes discoloration from copper without damaging the base metal.
A small 4L size has finally arrived! A discoloration prevention agent that prevents copper products from tarnishing! Due to its small size, it is perfect for sheet metal and metal processing companies!
We aim to meet the needs and trust of our users and strive to create better products.
Japan's Nippon Steel's heat-resistant titanium alloy has higher high-temperature tensile strength, high-temperature fatigue strength, and oxidation resistance than pure titanium, yet its workability is comparable to that of pure titanium.
12-inch Si double-sided polished wafer, Φ300mm silicon substrate, thickness 775±25um, P-type <100>, 1-100Ω·cm, double-sided mirror.
Quickly sensing changes in society! We are confident in our know-how cultivated through over 45 years of rich experience.
Contributing to the extension of the lifespan and improvement of productivity of heat treatment furnace components and jigs.
We offer a variety of alloys by adding tin to copper, which possess spring properties, corrosion resistance, fatigue resistance, and wear resistance!
A must-see for those struggling with surface treatment and coating of press molds, aluminum die-casting molds, and cutting tools!
Used in brake parts for automobiles and construction machinery, as well as in valves for water and gas.
Rich color variations! Eliminates paint mottling and uneven film thickness like spray painting.
ARGUNA-ALLOY 1 suitable for harsh conditions in high-temperature environments.
Barrel and rack plating process for functional parts
Hard chrome plating without using lead electrodes
This is a flexible product that overlaps thin copper strips and copper foil for electrical connection parts, electrical equipment, and power supply devices for welding machines, with terminal sections at both ends!
We will introduce the repair of metal products in a video!
We will handle everything in-house, from material procurement to processing, storage, distribution, and machine manufacturing.
From post-processing, plating, painting, anodizing, machining, logistics, electrical wiring, design, to on-site construction!
It is high-purity copper at the world’s highest level of 6N (purity approximately 99.9999%).
The EIM burner is the ideal burner for non-ferrous metal melting furnaces that require a high-brightness, straight flame.
The EIRS burner is the ideal burner for non-ferrous metal holding furnaces that require a high-brightness flat flame.
The latest research trends and technological seeds for rare metal and precious metal recycling using microorganisms based on bio-separation technology!
An unparalleled lineup that allows no competition! High yield point and tensile strength with tough steel.
Silica for matting agents with excellent dispersibility in water-based coatings.
Silica that balances high polishability and scratch resistance! Ideal for polishing precision instruments and for use in toothpaste!
Achieving both aesthetics and strength! Brass mirror frame that shines around commercial spaces【8mm single long channel】.
Ceramics demonstrate effectiveness surpassing that of fluoride! Surface treatments that were previously difficult are now possible with Shine's Cerarmor and Blue Armor!
We can export through official channels from Vietnam and submit all necessary documents.
Automation of measuring water hardness, metal salts in electroplating solutions, and metal concentrations in minerals using a potentiometric automatic titration device.
For improvements in lightweight design, thermal conductivity, and electrical conductivity, aluminum (Al) porous (low-density) sintered metal is recommended.
Are you troubled by the discoloration of copper? ASAHI's BT series protects copper from discoloration due to oxidation.
In response to many requests, we have added a 4L size of the copper discoloration prevention agent.
Reliable manufacturing. Manufacturing that can accommodate a variety of small quantities.
Various forging and machining until completion. We also accept various ship classification inspections.
Aluminum foil with excellent UV reflectance properties.
High-precision gold electroforming and silver electroforming with high added value.
The solder wetting properties and bonding properties are also very excellent! Introducing the silver plating we offer!
High-frequency pressurized hot water heating system "Slim Riser Light"
Use and sale of the electric mold turning machine universal hanger (Utility Model Registration No. 2590721).
Mg purity ≥ 99.95 to 99.99%: Particle size 3mm to 6mm: Shape (Ball, Pellet, Flake)
Spherical nickel (Ni) powder produced by physical vapor deposition (PVD). Customizable particle size at the submicron scale.
Fine high-purity α-phase/β-phase silicon nitride (Si3N4) powder. We can accommodate particle size customization on a micron scale.
You can purchase materials such as titanium and stainless steel in small lots through mail order.
You can purchase titanium/titanium alloy pipes for thin-walled welding online, starting from 1 meter/1 piece. We also offer cutting and shipping according to your specified dimensions.
For products made of cupronickel and white copper that excel in seawater resistance and corrosion resistance, please trust Shimada Metal Co., Ltd.
The origin of new materials with expanding applications.
It is possible to manufacture flat bars and shaped materials with the C2700.
C3771 is also known as forging brass and is the most suitable brass for hot forging.
It is an alloy with slightly higher strength than A1070, and it has good extrudability and corrosion resistance.
A slide bar rack ideal for sorting architectural hardware and long-length hardware by residence.
We offer a wide variety of non-ferrous metals that hold infinite possibilities.
We will provide the exact same service as in Japan (our company) in the Republic of the Philippines.
We will finish the specified steel type to the specified dimensions using a milling machine for delivery. If sufficient precision cannot be achieved with the milling machine, we will finish it using a surface grinder.
It has properties such as wear resistance, seizure resistance, and corrosion resistance, demonstrating excellent effectiveness.
Specializing in prototype development projects and special cases from single items to mass production using 3D-CAD/CAM/CAE.
We can also purchase metals that are difficult to identify.
We constantly challenge ourselves with new demands from our customers, reflecting them in our products and receiving high praise.
There is technology for extracting from precious metal waste catalysts and various raw materials. It is a registered brand with LBMA and TOCOM.
We have a track record of supplying major semiconductor manufacturers in Japan, South Korea, and China. We provide our products with high-level foreign matter management.
By always maintaining a rich variety of stock, we can flexibly respond to our customers' needs!
With a soft sound quality, it particularly resonates with a long aftersound! Examples of instrument production with antibacterial effects.
Nickel silver (yohaku) is used in watches, glasses, electronic materials, models, musical instruments, fishing gear, and more. A copper alloy with a beautiful luster, it has a wide range of applications and functionality!
High strength and wear resistance! A large stock of phosphor bronze rods ideal for aerospace applications.
Ideal for mold inserts! High strength and high durability beryllium copper alloy.
High strength and high reliability. An ideal beryllium copper alloy for semiconductor manufacturing fixtures.
For semiconductor manufacturing tools that require high intensity and high precision. Quick delivery response.