Electronic Components and SemiconductorsWeekly Company Rankings

We will realize dreams through material development and human power for the future of people and the Earth.

Manufacturing and sales of chemical products, electronic devices, and functional resins / real estate leasing

Prototype printed circuit boards and achieve short delivery times! Total support for circuit board design and manufacturing!

■Design, manufacturing, component mounting, and metal mask production of printed circuit boards.

We manufacture and sell abrasives and other products that cater to a wide range of fields.

- Silicon wafer - Semiconductor device - Hard disk - Functional materials / New materials - Thermal spray materials

We provide a wide range of services from procurement of parts such as motors, fans, pumps, and heat dissipation materials to PCB design and manufacturing.

■ Supply of Micro Motors We offer a wide range of products from simple brushed motors to high-end brushless motors. In particular, we have extensive experience with vibration motors and vibrators. ■ Supply of Fans and Blowers We have a diverse selection of products tailored to conditions such as airflow, air pressure, and voltage. ■ Supply of Heat Dissipation Materials and Electromagnetic Wave Absorption Materials We handle thermal conductive sheets and electromagnetic wave absorption materials for heat management. ■ Supply of Connectors and Other Components We specialize in female connectors that connect to the exterior of devices. ■ Inspection Agency Services We have a product inspection team in China, allowing us to dispatch inspectors to your desired factory for inspection services. ■ Design of Printed Circuit Boards We primarily specialize in artwork design and can also accommodate circuit design and simulation as needed. ■ Manufacturing and Sales of Printed Circuit Boards We can handle a wide range of boards, from single-sided boards to rigid-flex and build-up boards.

ISOLITE, leading company for high-temperature insulation technology, provides comprehensive support with a consistent system from development to sales, also manufacturing high-temperature dust collection filters and non-combustible materials for construction.

Manufacturing and sales of general industrial refractory insulation materials High-temperature refractory insulation materials RCF regulation compliant products AES wool (biodegradable fiber) PCW (polycrystalline mullite fiber, alumina fiber) High-temperature insulation wool Refractory insulation bricks Design and construction of industrial furnaces Furnace wall diagnostic system Non-combustible materials for construction Lightweight setters (isoplaton) High-temperature dust collection filters ■ Research and Development Headquarters (Technical Research Institute) Research and development of new products

With advanced technology, we bring nourishment to people and the Earth. We are creating a rich future where people and technology coexist!

■Electronics-related business ■Chemical-related business

Always seeking to improve quality and develop new technologies. Connecting electricity and electricity, and focusing on people and life for half a century. Nichifu is a company that contributes to society.

○ Crimp terminals, crimp sleeves, chain-type terminals, crimp terminals, various connectors, ICT insulated chain-type crimp terminals ○ Various ICT crimping machines, manual crimping tools, various assembly labor-saving devices

We are an analytical company that responds with advanced technical skills, based on the principle of "strict confidentiality for our clients."

【Analysis and Reliability Evaluation Business】 　■ Analysis and evaluation from data collection of various electronic components to failure analysis 　■ Evaluation of raw materials and characteristics in research and development and manufacturing 【Inspection Equipment Development Business】 　■ Development and sales of solar panel inspection and measurement instruments 【Electronic Equipment Repair Business】 　■ Repair of industrial equipment and computers 【Wafer Processing Business】 　■ Wafer processing services and sales

LAPP, a major German manufacturer, was the first in the world to industrially produce multi-core cables.

We provide sales and services related to various industrial wires and cables, cable glands, connectors, accessories, and harness assembly.

Supporting Japanese manufacturing! We procure electronic components that are discontinued or have delivery issues, providing reliable quality assurance through thorough inspections by professionals.

Procurement, sales, and import/export of electronic components that are difficult to obtain due to production discontinuation, delivery issues, etc.

Creating the future with tradition and innovation, Techno Onishi Co., Ltd.

■Electrical insulation materials, chemical industrial products, parts for electrical and electronic devices, Japanese and Western paper, paper products ■Packaging materials, various types of tape, building materials and environmental-related materials, machinery and equipment ■Domestic sales processing of the above products, as well as import and export operations of metal products

The Gel Group supports users' businesses and contributes to people and society through two perspectives: "control" and "energy saving."

【Gel System Main Products】 ■ Solid State Relay (SSR) ■ Thyristor Module ■ Diode Module ■ FRD Module ■ Power Regulator ■ Power Regulation Controller ■ Proximity Switch ■ Float Switch ■ Electronic Breaker ■ Remote Monitoring Device ■ Eco Lighting ■ Energy-Saving Related System Services 【Naka and Company Main Products】 ■ Crystal Oscillator SPXO, VCXO, TCXO, OCXO ■ Crystal Resonator UM-1, UM-5, HC-49 ■ Various Components for Oscillators We handle various components for oscillators.

Full support from FPC design, prototyping, and mass production to board power-on testing, appearance inspection systems, and FA automation! TAIYO FPC SOLUTIONS!

■Electronic Circuit Board Business - Design and manufacturing of flexible printed circuit boards - Assembly of printed circuit boards - Electronic circuit CAD design - Production of metal masks (electroforming method) - Design and manufacturing of various contact probes ■Test System Business - Development and manufacturing of power-on testing systems for printed circuit boards - Development and manufacturing of final appearance inspection systems for printed circuit boards - Development and manufacturing of peripheral devices for inspection systems - Manufacturing of visual inspection devices and image processing devices ■Industrial Machinery System (Trading Company) Business - Sales of high-end products from carefully selected manufacturers - Design and manufacturing of robot FA systems and automation systems - Import and export operations ■Mirror Polishing Machine Business (Mirak Co., Ltd.) - Manufacturing of mirror polishing machines and grinding machines - Maintenance and retrofitting of equipment - Sale of grinding wheels

TOMOEGAWA has evolved from a pioneer of specialty paper to the one and only TOMOEGAWA that creates new business value centered on "papermaking, coating, adhesive, powder" technologies!

[Toner Business] Business related to manufacturing and sales of toner [Semiconductor and Display-related Business] Business related to manufacturing and sales of optical films for FPDs, as well as electronic component materials for semiconductors [Functional Sheets Business] Business related to papermaking and sales of paper and functional paper, as well as paper coating [Security Media Business] Business such as securities, cards, ledgers, magnetic recording products, and other items, as well as information processing [New Business Development] Development of new products through the integration of fundamental and elemental technologies owned by our group and developing new technology [Other Business] Real estate leasing, logistics service, and others

Connecting the world through electronics.

An electronics trading company engaged in the import and sale of overseas electronic components. It deals with a wide range of products including analog ICs, other ICs, passive components, high-current connectors, DC-DC converters, power supplies, batteries, various sensors, metal processing, and heat sink business.

Leave the precision positioning stage to us. With over 50 years of experience at our headquarters in Germany, we offer multi-axis positioning from nano to sub-micron levels.

Manufacturing and sales of linear motor stages, air bearing stages, piezo stages, voice coil stages, and measurement system instruments and devices.

Creating superior value - Nippon Polymer Co., Ltd.

- Fluororesin, metal cutting/molding processing, fabric materials and sales, coating, and various surface treatments - Processing and sales of various engineering resin products (manufacturing processes for food, semiconductors, LCDs, interior materials, building materials, LCD manufacturing equipment, electrical/electronic, food manufacturing equipment, medical devices, automotive parts, etc., as well as components and materials for food packaging machines) - Manufacturing of outdoor and sports-related products - Photocatalyst "Catalystar" for sterilization, antibacterial, and deodorization - Magnetic curtain "MAGLEN" (utilized in various industries such as manufacturing, agriculture, food and beverage, construction, and environmental sectors)

As a company that provides assembly technology for precision substrates and FPDs, we aim to be a global leader.

Sales and import/export of electronic materials, components, machinery, and chemical industrial products for the electronics industry. ● Equipment: ACF assembly equipment / Musashi Engineering dispensers / Nippon Avio pulse heat welders / Optical gel lamination systems / Gloves from Piercan ● Materials: Anisotropic conductive film (ACF) and paste / Shin-Etsu silicone / Solder pallet materials / Products from Taiyo Mesh (EMI shielding and thermal management products, ultra-high temperature adhesives, wire mesh, mesh belts, perforated metal, expanded metal) ● Components: High-density flexible substrates / Solder and SMT pallets / ACF test work ● Chemicals: Chemical industrial products / Surface treatment agents / Fine chemicals / Various resists ● Technical Services: ACF design and review services / ACF assembly services / Equipment technical services Proposal, installation, and after-sales support for the above equipment and technical services.

Kell provides the system from the connector to the rack.

■Connectors/Switches ⇒Board-to-Board Connectors ・IC Connectors ・Card Connectors ・Switches/Others ⇒Board-to-Board Connectors ・Floating Connectors ・Quarter-Pitch Connectors ・1mm Pitch Connectors ・Half-Pitch Connectors ・Standard Connectors ・Card Edge Connectors ⇒Board-to-Cable Connectors ・Ultra-Fine Coaxial Cable Connectors ・Crimp Connectors ・Flat Cable Connectors ・Discrete Cable Connectors ⇒Interface Connectors ⇒Power Connectors ・Terminal Block Connectors ・Battery Connectors ■Racks/Backplanes ⇒Bus Rack Systems ・CompactPCI ・VME ・IEC297-3 ・JIS ・EIA ⇒Backplanes ・CompactPCI ・VME ・PCI ・ISA ⇒Option Units ・Power Units ・Fan Units ・Extension Boards ⇒Accessories ・Card Holders ・Guide Rails ・Front/Fill Panels ・Spacers *We actively accommodate custom requests. Please feel free to consult with us.

Leave it to us for processing carbon ceramics in the semiconductor industry, environmental measures, power factor improvement, work and process efficiency, and the development of new heaters.

Graphite products, ceramic products, equipment products, etc.

KITZ SCT aims to contribute to the creation of a prosperous society by continuously enhancing corporate value through creative and high-quality products and services.

- Development, manufacturing, and sales of piping components, gas panels, and units for semiconductor manufacturing equipment and peripheral devices. - Development, manufacturing, and sales of piping components and units for various ultra-high purity fluids. - All operations incidental to the above items.

We aim to be a "problem-solving company" by providing optimal total solutions while valuing our bond with customers through cutting-edge electronics products.

■Sales of various electronic devices, including semiconductor devices ■Design, manufacturing, and sales of switching power supplies and power supplies for LEDs ■Manufacturing and sales of other electronic equipment and related components ■Sales of EV fast chargers, LED lighting equipment, and substrate appearance inspection devices ■Sales of industrial solar power generation-related products ■Sales of industrial energy storage systems ■Sales of energy storage systems for grid stabilization

"Everything is for the satisfaction of our customers." We accurately respond to the diversifying and complicating needs.

【Related Manufacturing Departments】 ● WACOM MANUFACTURING CO., LTD. Quartz glass products (ASM Epsilon quartz components, various processed products), silicone rubber products, components for semiconductor equipment, carriers for wrapping and polishing. ● TOMCO MFG.,LTD. Wafer transfer machines, IPA vapor drying equipment, parts regeneration cleaning, parts processing. ● AMAYA CO.,LTD Atmospheric CVD equipment, MO-CVD equipment, photomask cleaning equipment. 【Environmental Related】 Solar-grade Si wafers, separator & cleaning systems, wire soak coolant recovery systems, cerium oxide recovery systems, slurry recycling systems, IPA recycling systems, water quality analyzers, inorganic coagulant oil floc. 【Materials and Components Related】 Covalent Materials Co., Ltd. products (quartz glass, SiC, carbon), fine ceramics, machinable ceramics, various filters, other consumable parts for semiconductor equipment, silicone resins, refractory materials, various heater-related products.

We recommend the optimal collet for the diversifying semiconductor chips and production environments.

【Products】 ■ Exchangeable rubber collet (exchangeable rubber tip) ■ Carbide die collet ■ Resin collet

We deliver high-quality, ultra-compact switching power supplies (DC stabilized power supplies), DC-DC converters, and noise filters.

Manufacturing and sales of electronic devices and electrical machinery.

We contribute to solving our customers' challenges through proposals rooted in "Suzukou Quality & Suzukou Original."

【Original Products】 ☆Polyimide molded body (Sepra) ☆Diamond grinding sheet (Polymond) ☆Diamond blade ☆Micro torque meter ☆Robotocker 【Other Products We Handle】 ●Robots/Automation equipment ●Engineering plastics　　　●Diamond grinding materials　　　●Industrial diamonds ●Hard alloy processing equipment　　　●Ceramics ●Heat dissipation substrate materials, heat dissipation/insulation materials, special polyimide materials ●Assistive devices　　　　　●Industrial equipment repair survices

Yamashita Material is an electronic circuit board manufacturer engaged in the development, production, and sales of FPC (Flexible Printed Circuit Boards).

Development, design, manufacturing, and sales of flexible printed circuit boards Design and sales of printed circuit boards Mounting of electronic components

An international leading company in connector systems, delivering high-performance and high-quality connectors in a short delivery time! We also accept orders starting from one piece.

Import, sales, and service of electrical connectors and other electronic components.

From optical communication to semiconductors - a technology partner supporting industrial innovation with advanced testing solutions.

Focusing on the fields of high-speed communication, optical chips, and semiconductor wafer chip testing, we are building a complete ecosystem consisting of "measuring instruments + devices + solutions." The main product lineup is as follows: High-speed signal & optical communication measuring instruments: sampling oscilloscopes, clock recovery units, bit error rate testers (BERT), wavelength meters, high-precision source meters, etc. Optical chip testing equipment: LD (laser diode) CoC burn-in systems, bare chip testers, silicon photonics wafer test systems, etc. Semiconductor testing equipment: high-performance testing equipment such as SiC wafer burn-in test systems, SiC bare chip test and KGD (Known Good Die) sorting systems, WAT wafer parameter measurement systems, and WLR/PLR reliability test systems. Industry solutions: providing comprehensive solutions that meet industry needs, such as 1.6T optical interconnect test solutions and CPO (Co-Packaged Optics) test solutions, flexibly responding to the diversifying customer demands.

40 years in this field!! Leave coaxial cable processing and coaxial connector processing to us!

■Manufacturing and sales of electronic components - Design, manufacturing, and sales of custom connectors - Manufacturing, processing, and sales of coaxial cable assemblies - Manufacturing, processing, and sales of semi-rigid cable assemblies - Design, manufacturing, processing, and sales of high-frequency coaxial connectors - Real estate management and operations

Electronics ・Harmonious・Chemicals Functional film-forming substrate - Liquid crystal assembly device - Organic semiconductor evaluation device

1. EHC Cell, Metal Film Substrate, Various Patterned Substrates - EHC cell, optimal for advanced material evaluation - Metal film substrate, comb-type electrode substrate, patterned glass, patterned film 2. Small Liquid Crystal Panel Assembly Equipment - Small rubbing device - Simple rubbing device - Heating type spin coater - Desktop glass scriber - Glass breaker 3. Organic EL Evaluation Equipment, Organic Solar Cell Evaluation Equipment - Evaluation equipment that automates the LIFE and IVL of organic EL with multiple channels - IV characteristic evaluation equipment for OPV and DSSC 4. Exposure and Development Experimental Equipment - Vacuum drying device - Parallel light exposure device - Automatic transport development device

We will achieve coexistence and mutual prosperity with our customers and partners through global optical technology, contributing to the development of science, technology, and industry.

【Products Offered】 ■ Lasers We import a wide variety of laser products from overseas and offer a diverse lineup to meet the needs of customers across various industries and applications. ■ Laser Peripheral Equipment and Accessories Optomechanics, optoelectronics, vibration isolation tables, optical components and modulation devices, beam profilers, power meters, galvanometers, protective glasses, etc. ■ Measurement Application Devices We provide cutting-edge industrial measurement and analysis devices utilizing light, including laser-based systems, particle size distribution measurement, fluid vector measurement, and non-contact measurement. This includes image processing-related devices and equipment such as infrared cameras. ■ Processing Application Devices Drawing devices, cutting, drilling, trimming of resistors, welding, soldering, and general processing, extending to semiconductor manufacturing.

Based on our design and development capabilities, analytical skills, and production technology in the high-frequency bands such as millimeter waves, we provide connectors, cable processing products, and high-frequency units.

High Frequency Coaxial Business... We develop and manufacture high-frequency connectors, cables, phase shifters, filters, and other high-frequency components that support frequencies up to 110 GHz. Through electromagnetic field analysis, unique designs based on years of know-how, and high-precision, high-quality manufacturing in domestic factories, we achieve differentiation from other companies, particularly with excellent high-frequency characteristics in the millimeter-wave band. Additionally, we provide solutions to our customers' high-frequency design challenges, not just limited to individual components. Digital Interface Business... We develop and manufacture high-speed transmission interface connectors, cables, various connection parts, components, and assemblies for a wide range of applications, from consumer electronics like AV devices to various industrial equipment. Lithium-Ion Battery Business... We design and manufacture custom solutions for various applications, including battery units and UPS using lithium-ion batteries, as well as drive systems and power generation/discharge devices combined with our own developed motors and generators. Machining Business... From mold manufacturing and design to cutting processing, substrate mounting, and assembly processing, we can achieve integrated production within our own factory, responding from design and prototyping to mass production at the fastest speed.

Providing high-reliability flash storage and DRAM modules for industrial and embedded applications.

Planning, development, manufacturing, and sales of industrial and embedded products ■ NAND Flash Storage (2.5" SSD, mSATA, M.2, CFast, SATA Slim, SATADOM) ■ DRAM Modules (DDR1, DDR2, DDR3, DDR4, DDR5 modules) ■ Embedded Expansion Modules (Communication, Storage (RAID), Monitor, Other Test Tools, Sensor Modules, Camera Modules) ■ AI Solutions

Shinko Electronics aims to be a specialist in optoelectronics.

Manufacturing and sales of in-house developed photo sensors Sales of high-brightness, full-color, UV LEDs manufactured by Nichia Corporation Sales of precision motors, gearheads, and various controls manufactured by FAULHABER Sales of water-saving devices and conductivity meters manufactured by Myron L Company

We are keeping the spirit of challenge alive and promoting both manufacturing and the Ina Valley.

Product Items Handling Items 〇 Carbon Film Fixed Resistors 〇 Rectangular Chip Resistors 〇 Metal Film Fixed Resistors 〇 Resistor Networks 〇 Metal Glaze Film Fixed Resistors 〇 Various PCB Assemblies 〇 Fuse Resistors 〇 Surface Mount Resistor Networks 〇 High Voltage Resistors 〇 Hybrid ICs 〇 Flame Retardant Coating Fixed Resistors 〇 Cement Resistors 〇 Wirewound Fixed Resistors 〇 Molded Resistors 〇 Pressed and Plated Products

Contribute to the development of society by providing high-quality products and services that impress our customers.

In the electronics business, we import and sell semiconductor manufacturing equipment used in the latter stages of power semiconductor manufacturing processes, as well as materials for electronics manufacturers, small equipment for research and development for universities and research institutes, and procurement and sales of components, materials, and devices related to liquid crystal displays. Additionally, we are engaged in the development of products tailored to customer requests and collaboration with universities for industry-academia partnerships. ◆Main Products Wire bonders, bond testers, reflow equipment, X-ray inspection equipment, sintering equipment, electrical characteristic testing systems for power devices, plasma equipment, die bonders, flip chip bonders, conductive adhesives, temperature data loggers, wedge tools. In the marine business, we procure equipment for ships from domestic manufacturers and sell it to domestic and overseas shipyards and the Japan Coast Guard. In the environmental equipment business, we import devices aimed at the separation and concentration of liquids in industries such as food, chemicals, and petrochemicals based on sales agency agreements with overseas manufacturers, and sell them to domestic customers. Furthermore, in both businesses, we develop our own products based on customer requests and handle products that we commission to cooperative factories for manufacturing and then sell. ◆Main Products Special deck equipment for ships, marine cranes.

We are a sensor manufacturer based in Switzerland! Please take a look at our website!

Sensirion is one of the world's leading manufacturers specializing in sensors and sensor solutions that improve efficiency, health, safety, and comfort. Our sensors are used to precisely and reliably measure various environmental parameters and flows. We aim to make the world smarter with advanced sensor technology. As pioneers of innovation, we develop solutions tailored to the specific needs of our customers and partners in the automotive, industrial, medical technology, and home appliance markets, as well as high-quality products for cost-effective mass production. At Sensirion, we offer a range of sensors that utilize MEMS technology. We handle a wide variety of sensors, including temperature and humidity sensors, liquid flow sensors, gas flow sensors, mass flow controllers, differential pressure sensors, CO2 sensors, and PM2.5 sensors.

Realizing a future with dreams through memory technology.

Design and development of memory LSI products and solutions.

Technology, trust, and speed for all customers! We deliver a wide range of products, technologies, and services tailored to meet customer needs, focusing on space, defense, and industrial applications.

Import and export of MIL-spec products, semiconductor products for general industry, microwave products, and other electronic components and hardware.

A society of the future connected by coils.

Design, manufacturing, and sales of electronic components and modules used in applications for automobiles, home appliances, and industrial machinery.

Our company tests and evaluates product safety from the design stage, responding to our customers' diverse safety requirements with a "One Stop" solution.

Safety inspections of semiconductor manufacturing equipment and SSQA audits Creation and consulting of product manuals in Japanese and foreign languages Creation and sale of warning labels Field evaluation services (electrical testing) for industrial equipment for the U.S. market

Alps Alpine creates new value that brings joy to people and the Earth.

【Product Items】 ■ Sensors ■ Switches ■ Variable Resistors ■ Encoders ■ Tactile Switches ■ Connectors ■ Multifunctional Operation Devices ■ Aspheric Lenses ■ Actuators ■ Data Communication Modules ■ Power Inductors ■ Haptic Reactors ■ Touch Input Devices ■ In-Vehicle Information Equipment

Connecting people and society to the next generation.

■Fiber Business Manufacturing and sales of textile products made from cotton, synthetic fibers, and other materials (yarn, woven fabrics, knitted fabrics, and secondary products), as well as dyeing and finishing of cotton and synthetic woven and knitted fabrics. ■Chemical Products Business Manufacturing, processing, and sales of polyurethane foam, synthetic wood, inorganic building materials, functional films, precision filtration-related products, high-performance engineering plastic products, non-woven fabrics, and reinforcement nets. ■Environmental Mechatronics Business - Manufacturing, sales, and maintenance of electronics-related products - Design, manufacturing, construction, and sales of various plants related to the environment and energy, including biomass power generation projects - Manufacturing and sales of bio-related products - Manufacturing and sales of machine tools and related equipment. ■Food and Service Business Manufacturing and sales of freeze-dried foods Management of hotels, driving schools, and others. ■Real Estate Business Real estate leasing.

We can offer processing technologies for lasers and mechanical components, as well as inspection-related technologies related to 5G, IoT, and automotive applications, so please feel free to contact us.

■Sales of in-house brand Vela products, including printed circuit board hole drilling machines and printed circuit board outline processing machines ■Development of in-house CO2/UV laser processing machines and contract processing using them ■Contract processing for laser, mechanical, and inspection (JOB SHOP business) ■Sales of various inspection equipment ■Rebuilding/modification/maintenance of used equipment

For the development, design, and manufacturing of optoelectronic integrated circuits, please leave it to us.

【Business Objectives】 ■ Development, design, manufacturing, sales, and import/export of optoelectronic integrated circuits, etc.

We deliver top-class antenna solutions with high technology and reliability!

■Development, manufacturing, and sales of standard antennas ■Contract design, manufacturing, and sales of antennas for communication devices (LTE/GPS/Wi-Fi/ZigBee/WLAN/Bluetooth/RFID/DECT, etc.) ■Contract design, manufacturing, and sales of cable assembly products with coaxial connectors

Transformers are made by specialized manufacturers!! The know-how and track record are different. [Please consult us about custom (new, replacement), quality, delivery time, and price.]

We offer a wide range of products from catalog items to custom items, including pulse transformers, switching power supply transformers, choke coils, telecom transformers, general transformers, delay lines, DC-DC converters, filters, and modules. We specialize in manufacturing for industrial equipment, ensuring long-term supply! Please feel free to consult us for new inquiries, alternatives for discontinued products, long lead-time items, VE proposals, and more.

ULVAC provides solutions for the development of various industries and scientific fields with innovative technology and next-generation ideas.

Development, manufacturing, sales, customer support, and import/export of vacuum equipment, peripheral devices, vacuum components, and materials for the display, solar cell, semiconductor, electronics, electrical, metal, machinery, automotive, chemical, food, and pharmaceutical industries, as well as universities and research institutes. Additionally, research guidance and technical consulting related to vacuum technology in general.

Keystone International is the keystone that connects Japan and the world.

Import and sales of semiconductor lasers, infrared detectors, telecentric lenses, piezo actuators, chillers, heat sinks, optical fibers, precision stages, etc.

Leave it to us for anything related to electronic components and devices. We will quickly provide you with a variety of practical solutions.

- Manufacturing, import and export, processing, and sales of electronic components - Manufacturing, import and export, processing, and sales of electric wires and cables - Manufacturing, import and export, processing, and sales of electrical equipment, information and communication connection cables, and connectors - Manufacturing, import and export, processing, and sales of machinery and its parts - Design, production, and sales of printed circuit boards and electronic circuits - Design, production, and sales of healthcare equipment - All businesses related to the above items

Comprehensive manufacturer of spacers (manufacturing and sales of mechanical and electronics parts)

Manufacturing and sales of electronic devices and electronic components Manufacturing and sales of mechanical components ■Mechanical Components ○Metal spacers ○Plastic spacers ○Special purpose spacers ○Spacers for LED mounting ○Spacers for D-sub connector mounting ○Metal washers ○Rubber washers ○Plastic washers ○Insert nuts (screw-in type, press-fit type) ○Mechanical components (precision shafts, fully threaded rods, spring posts) ○Knurled knobs and nuts ○Bushings ○Various metal and plastic screws, bolts, and nuts ■Electronic Components ○Pin headers (pins, sockets, jump sockets, etc.) ○Board terminals (relay terminals, lug terminals, power terminals, etc.)

Leveraging the technology of "separation and transportation" developed through paper-making wire manufacturing, we are expanding into various businesses such as filters, conveyors, filtration devices, and electronic components.

1. Manufacturing, processing, and sales of paper and pulp nets and various paper-related materials and equipment. 2. Manufacturing and sales of various wire meshes and drawn wire, other metal products, and manufacturing, sales, design, and construction of various industrial machinery and equipment. 3. Design, manufacturing, processing, sales of precision processed products using photofabrication and other various methods, as well as sales of equipment. 4. Power generation and electricity sales, as well as sales of related equipment. 5. Manufacturing and sales of composite materials, resin processed products, and chemical products. 6. Manufacturing and sales of stainless steel pools, FRP pools, milt pools, and related equipment. 7. Planning, design, construction, operation of various water parks and thalassotherapy facilities, as well as consulting services. 8. Development, design, manufacturing, and sales of pool filtration systems, drinking water, disaster drinking water, rainwater, and various water treatment systems for wastewater. 9. Maintenance inspection, repair, and installation work of pool filtration systems. 10. Sales of high-density concrete (G-con). 11. General agency business for insulating joints manufactured by Nuova Giungas in Italy.

A cutting-edge company in Asia, primarily focused on process filters.

■Sales of filtration equipment ■Contract analysis and testing services ■Import and sales of filters ■Recruitment and staffing services ■Export of materials and equipment ■Technical consulting services

Exceeding expectations with satisfaction through device × solution! Expanding a network of over 40 locations both domestically and internationally.

■Device sales ■Solution provision ■Collaborative robot sales ■Manufacturing DX

Aotex Co., Ltd. is a specialized trading company dealing with lasers, laser peripheral equipment, and optical devices.

- Manufacturing and sales of laser equipment and its application devices and parts, as well as import and export operations. - Manufacturing and sales of electrical and electronic equipment and its application devices and parts, as well as import and export operations. - Sales of optical equipment and its application devices and parts, as well as import and export operations. - Manufacturing and sales of medical, physical, and measuring instruments and their application devices and parts, as well as import and export operations. - Manufacturing and sales of adhesives, adhesive tapes, adhesive sheets, and their equipment and devices, as well as import and export operations. - All operations incidental to the above items.

Industrial Quality

Our company has been providing a wide range of electronic components such as trimmers, switches, pressure sensors, scanners, and motors for many years in various fields including information and communication, broadcasting, home appliances, housing equipment, disaster prevention, medical care, measurement, OA/FA equipment, semiconductor manufacturing equipment, pneumatic equipment, electronic application devices, machine tools, and industrial equipment. Our quality has received high praise in the component market. Our development philosophy is always user-oriented, starting with building relationships that share development ideas in line with the needs of our client companies. To contribute to the further advancement of the IT society, we will create "new added value" that is accepted by users as an electronics company.

Consistent domestic production from design, manufacturing, inspection to shipping. For printed circuit board development, choose Nippo!

【Business Activities】 ■ Development of printed circuit boards ■ Development of IoT cloud systems ■ Manufacturing of temperature and humidity controllers ■ Product development of microcomputers ■ Manufacturing of ultrasonic humidifiers and cleaners ■ Design, development, and manufacturing of other electronic devices

Kyoden is not a circuit board manufacturer. It is a fully in-house EMS manufacturer.

Printed circuit board manufacturing Circuit design, software development, printed circuit board design, various simulations Component mounting, component procurement Sheet metal processing, pressing, resin molding EMS, final assembly

An electronic components manufacturer offering in-house design, engineering, and mass production.

【Product Lineup】 ■ Jacks (Waterproof, Multi-pole, small-sized, DC, custom products) ■ Connectors (Waterproof USB, custom products) ■ Plugs with cord (Multi-pole plug, custom products) ■ Antennas for mobile phones ■ Other custom products (charging stand, battery case, battery terminal)

A global infrastructure technology leader backed by 50 years of innovation, collaboration, and exceptional engineering.

Sales and technical support of semiconductor components for industrial and automotive equipment, data centers, broadband and wired networking, enterprise storage, and wireless and mobile communications.

We provide compact-sized, precise hollow fiber membrane filtration filters for small-scale, low-flow, and fine applications, produced in-house domestically!

Precision hollow fiber membrane filter for pharmaceutical liquids and pure water. Air filter for semiconductors. Filter for compressed air. Dryer for compressed air (dehumidifying filter). Pure water cleaning water gun. Compressed air blow gun for clean rooms. Humidity control device (scientific apparatus).

Semiconductor testing specialist

■ Semiconductor Inspection (Wafer) - Electrical characteristic testing, laser trimming, appearance inspection ■ Test program development and defect analysis ■ Modification of semiconductor testing equipment ■ Reliability testing

Innovative products for more customers.

[Fan] ○ EC fan ○ Axial fan ○ Centrifugal fan ○ Fan motor ○ Fan controller [Drive] ○ Motor ○ Inverter

From "Insulation Material Trading Company" to "Electronics Solution Partner"

■Sales of electrical materials, electronic materials, chemical materials, and metal materials ■Sales of synthetic resin raw materials, industrial films, and molded products ■Sales of various types of wires and wire processing products ■Sales of electronic components ■Sales of resin impregnation equipment, electronic assembly equipment, and electrostatic protection materials, along with related services

Techno Vision Co., Ltd. is a manufacturer of semiconductor (flat panel, FPD) manufacturing equipment.

■Cleaning equipment related to semiconductor manufacturing processes ■Assembly equipment related to semiconductor manufacturing processes ■Cleaning equipment related to FPD manufacturing processes ■Dicing peripheral equipment ■Manufacturing, sales, and development, design, manufacturing, export, and import operations of the above products and related products. 【Cleaning Equipment Related】 ・Cassette and carrier cleaning equipment ・Photomask cleaning equipment ・Fully automatic mask cleaning equipment / Mask cleaning machine ・Simple cleaning unit ・Ultraviolet ozone cleaning equipment ・Heating equipment for ultra-pure water and air 【Super Clean Heater】 ・Heating heater for ultra-pure water ・Clean heating heater ・Simple type temperature controller 【Post-Process Assembly Related】 ・Tape mounter / Wafer mounter ・Wafer expander / Wafer expansion equipment ・UV film curing equipment / Ultraviolet film curing equipment ・Grip ring / Wafer storage case *We also support nationwide in Japan and overseas (Taiwan, China, Europe, and the United States). For more details, please feel free to contact us.

As an expert in electronic components, we offer a wide range of products including connectors, speakers, AC adapters, and DC-DC power supplies.

Sales of connectors, speakers, microphones, encoders, thermal sensors, etc. manufactured by Same Sky, as well as AC-DC power supplies, AC adapters, and DC-DC converters from CUI Inc, YDS (Yuan Dean Scientific), and Power Add.

Digital manufacturing aimed at together with our customers [Factory DX]

■Planning, development, manufacturing, and sales of IoT-related devices ■Sales, education, and support of various digital tools, CAD/CAE/CAM software, 3D printers, etc. ■Consulting related to digital manufacturing

Paircom supports your manufacturing with the world's top-notch quality.

■Manufacturing of electronic devices and electrical components

A wide variety of heat management wiring boards available!

Design, manufacturing, and EMS of printed circuit boards (1) Rigid printed circuit boards (2) High-frequency printed circuit boards (Teflon, ceramics, PPE, etc.) (3) Ceramic printed circuit boards (DPC, AMB) (4) Thermal management printed circuit boards such as metal base (5) Formation of UV high-reflective film on the surface of the printed circuit board (6) Processing of clad materials using selective etching solutions (7) Surface treatment using vacuum technologies such as plasma and sputtering (8) EMS

Capacitors for Power Electronics

<Main Products> ■ Capacitors - Aluminum electrolytic capacitors (screw terminal type, snap in type) - Film capacitors (resin case type, aluminum case type)

Advanced Energy, enhancing sensing technology with reliable power conversion solutions.

【Products Handled】 ■Power Systems ■Source Technology ■Temperature Measuring Instruments ■Output Power Control ■Surface Potential Meters ■ESD Protection Products ■AC-DC Power Supplies, DC-DC Converters

We provide solutions to maximize your potential.

Development, manufacturing, and sales of NAND flash storage and DRAM modules.

We contribute to the high functionality of equipment with a rich product lineup and excellent performance.

Development, manufacturing, and sales of crystal devices, SAW devices, capacitors, and connectors. ■ Crystal Devices Crystal oscillators, clock oscillators, voltage-controlled crystal oscillators (VCXO), temperature-compensated crystal oscillators (TCXO), kHz band devices ■ SAW Devices SAW filters, SAW duplexers, SAW multiplexers ■ Capacitors Multilayer ceramic chip capacitors ■ Connectors Connectors for FPC/FFC, board-to-board connectors, backplane connectors, wire-to-wire/board connectors, switching connectors, interface connectors, card edge connectors, connectors for memory cards, shield locks, power connectors, power terminals

Specialized manufacturer of piezoelectric ceramics and sensors / Fujiceramics Co., Ltd.

(1) Manufacturing and sales of electro-ceramic materials such as piezoelectric ceramics (piezo elements) based on ferroelectrics. (2) Manufacturing and sales of various ceramics and sensors for vibration, impact, acoustics, ultrasound, and other applications. (3) Manufacturing and sales of various actuator elements such as micro-displacement devices. (4) Manufacturing and sales of other application devices and equipment for electro-ceramics.

Providing verification IP and verification technology services for various semiconductors.

○ LSI third-party verification services ○ Development and sales of verification tools and IP ○ Functional safety services

Euresys designs and provides image and video capture components, frame grabbers, FPGA IP cores, and image processing software.

【Areas of Expertise】 ■ Machine vision for the electrical equipment industry ■ Machine vision for general manufacturing ■ Machine vision for the printing industry ■ Machine vision for food inspection ■ Life sciences & medical ■ Microscopic inspection ■ Video capture and recording ■ ITS (Intelligent Transportation Systems) & traffic management ■ Military & defense ■ Video monitoring, surveillance & security

Fast. Affordable. Detailed. We strive daily to be of service to everyone. We excel in semiconductors, electronic components, urgent procurement, and cost reduction.

Wholesale import sales of foreign semiconductor and electronic components. We handle a wide range of major overseas manufacturers.

Bright Co., Ltd. is engaged in energy conservation through solar power generation and LED products.

* Electrical, electronic, video, and lighting equipment - Design, manufacturing, and sales of liquid crystal backlight units - Design, manufacturing, and sales of LED light guide plate units - Design, manufacturing, and sales of LED light bars - Design, manufacturing, and sales of LED display vision * Ultra-thin sign advertising boards (Beight lighting panels) - Design, manufacturing, and sales of LED light guide plate type and LED direct type * Sales of LED lighting equipment - Fluorescent type, flexible (tube, cube) type, bar type, downlights, spotlights, footlights, under-shelf lights, etc. * Sales of LED driver power supplies and AC adapters - PFC high-efficiency power supplies and switching power supplies, AC/DC adapters * Operation of solar power generation matching service "ECOMATCH"

・

・

Surely, it is something that exists in the future.

Design and manufacture of various machines and equipment 【Products handled】 Booster pump units High-pressure pump units Vacuum pump units Cooling devices Heating devices Constant temperature circulation devices Chemical solution supply devices Exhaust devices Fuel cell related

We provide semiconductor photolithography process-related equipment, particularly specialized coating technologies. We also handle high-pressure jet lift-off devices.

Manufacturing and sales of semiconductor manufacturing equipment Sales of materials for semiconductor device manufacturing Manufacturing and sales of semiconductor devices Consulting and marketing services related to semiconductor device manufacturing

We will provide cutting-edge "Eco Soldering Solutions TM" by building a comprehensive technical foundation and support system from various fields.

Manufacturing and sales of solder, flux, and soldering peripheral equipment and devices, as well as manufacturing and sales of bearings and hydraulic equipment parts.

Only the Best, Only the First (A Promise of the Highest and the Best)

Sales of hermetic seal processed products, ceramic processed products, continuous plating processed products for bars, wires, and pressed materials, as well as etching products.

Challenging the future as a trading company and a manufacturer.

【Commercial Business】 Sales and processing of electronic materials, semiconductor materials, electrical insulation materials, industrial materials, and synthetic resin materials Sales of electronics-related components Manufacturing and sales of reinforced plastic (FRP) products Sales of printed circuit board manufacturing equipment and machinery Manufacturing and sales of copper-clad laminates and shield plates for printed circuit boards Manufacturing and sales of printed circuit boards (rigid printed boards, flexible printed boards, flex-rigid printed boards) 【Manufacturing Business】 Design and manufacturing of printed circuit boards

A specialized trading company for power supply and battery products, equipped with expert technicians and various inspection facilities. We have numerous transaction records with major manufacturers both domestically and internationally.

Import and sales of power-related products and battery pack products. <Main manufacturers handled> Joules Miles Co., Ltd. TAIWAN MATSUO Co., Ltd. SINPRO ELECTRONICS CO., LTD. Kuantech Co., Ltd. (Cambodia factory) Other mainly dozens of Taiwanese manufacturers. Design and development of custom specifications for various related products, as well as OEM contract manufacturing.