Solid Solutions is a trading company specializing in the import of aerospace equipment.
■Import and sales of industrial equipment, aerospace (defense) equipment, etc. ■Sales support services for industrial equipment, aerospace (defense) equipment, etc. ■Renewal project for aging testing machines.
Advanced Technology Research Institute supporting space development and utilization, such as rockets and satellites, in Japan and around the world.
Design, development, and testing of systems, subsystems, and components for space equipment such as artificial satellites and rockets. Design, development, and sales of radiation-hardened electronic devices for space (single-board computers, OBCs, etc.), attitude control devices for artificial satellites (reaction wheels, star trackers, magnetic torquers, geomagnetic sensors, solar sensors, Earth sensors, GPS receivers, attitude control systems, etc.), propulsion systems (thrusters, propellant tanks, surface tension discharge mechanisms, high-pressure tanks, environmentally friendly propellants such as ADN and hydrogen peroxide, electric propulsion systems like PPT and Hall thrusters, propellant supply systems, subsystems, etc.), thermal control devices (multi-layer insulation MLI, heat pipes, OSR, thermal control coatings, etc.), communication devices (S-band, X-band, Ka-band, UHF/VHF transponders, transmitters, receivers, etc.), solar cells (TJ GaAs) and solar panel arrays, battery module (lithium-ion, etc.), antennas, power modules, etc. Sales of ground-based solar cells and concentrated solar power modules. Development and sales of thermal vacuum chambers. Sales of aerospace hybrid bearings.
Fly now for the future.
■Aviation Business ■Spatial Information Business
Low-cost, high-performance electrodynamic vibration testing equipment, various environmental testing devices, aerospace software, and space attitude control equipment.
Sales of environmental testing equipment, sales and maintenance of vibration testing equipment, heat-resistant coatings for a wide range of applications including aerospace, aerospace design and analysis software (such as Spacecraft Control Toolbox, Aircraft Control Toolbox, Launch Vehicle Toolbox, etc.), sales of structural frames and attitude control devices (reaction wheels and control moment gyros (CMG)) for ultra-small satellites. Consulting on the development of space equipment is also provided. Sales of electric vehicle charging devices using solar power.
Total Engineering of Bolts and Nuts
◆Plasma Carburizing Treatment and Equipment Sales ◆Stainless Steel Bolts for Water Supply (SDC Bolts) ◆Insulated Bolts for Water Supply (SDC Corrosion-Resistant Bolts, SDC Electrical Insulation Bolts) ◆Pure Titanium Bolts (SDC Titanium Bolts) ◆Titanium Alloy Bolts (SDC Titanium Alloy Bolts) ◆Various Special Screw Parts ◆Plastic Protective Parts (SDC Protect Parts) ◆Manufacturing and Sales of SDC Screw Performance Testing Machines ◆SDC Bolt Series SDC Bolts SDC Corrosion-Resistant Bolts SDC Titanium Bolts SDC Electrical Insulation Bolts SDC High Color Bolts SDC Heat-Resistant High Color Bolts SDC Clean Bolts
We provide sales and maintenance of various analysis software in the aerospace field, as well as contracted analysis services.
Sales and maintenance of various analysis software.
We provide aircraft modifications, upgrades, integration, and type certification acquisition that meet any mission requirements with low prices and high technical capabilities.
Design, integration, testing, and acquisition of FAA type certification for aircraft modifications, improvements, maintenance, system integration, and life extension. Additionally, development and sales of various space equipment and components, including satellites. We also sell ultra-small satellites, CubeSats, various equipment (electronic devices, communication devices, etc.), and solar cells. Furthermore, we offer simulation software for model rockets.
Continuing to evolve towards the future.
Design and manufacturing of electrical and electronic circuits, software, and machinery for aerospace and space equipment, injection molding machines, industrial robots, automotive parts, food machinery, acoustic products, etc.
A manufacturing network supporting the challenge to space from Ibaraki! We assist with any issues in the space business.
Main Activities ■ Responding to orders for space equipment, components, software, etc. ■ Order activities (exhibitions, matching meetings with space-related companies, technical exchanges with the Japan Aerospace Exploration Agency, etc.) ■ Development of in-house space talent (study sessions related to the manufacturing, quality, and business practices of space equipment) ■ Other regular operational meetings and information dissemination
Leave it to us for aviation fuel dispensing equipment.
【Product Line】 ■ U.S.A Husky/Hewitt manufactured aircraft refueling hoses / Domestic sales agent ■ Aircraft refueling equipment ■ Various oil-resistant and high-pressure hoses ■ Various aviation and industrial earth reels ■ Various aviation, industrial, and drinking water hose reels ■ Various cables and special cables ■ Various flow meters ■ Various pumps ■ Various industrial piping equipment ■ Emergency oil supply and discharge systems ■ U.S.A CLA-VAL manufactured PCV, nozzles, and couplers ■ U.S.A Gorman-Rupp manufactured pumps ■ U.S.A Hannay manufactured DC12, 24V explosion-proof motors ■ Germany Alfons Haar manufactured bottom valve systems ■ Design of heliport refueling equipment ■ Design and manufacturing of industrial piping equipment ■ Strainer manufacturing
Expert in the design and manufacturing of aerospace equipment and machinery, cleaning, and pressure and leak testing.
Special cleaning and development support for rocket components Cleaning, pressure leak testing, and development support for aircraft components Design, manufacturing, and maintenance of jigs and tools Component insulation work Development and manufacturing of cleaning agents
Technologies that support the development of aerospace.
■Manufacturing and Sales Business ■Aircraft Manufacturing Support Business ■Manufacturing and Sales Business
Applying the development experience of optical sensors for satellites from a "group of engineers" spun out from a major space satellite manufacturer.
1) Space Development Projects Development, design, and manufacturing of optical units for artificial satellites 2) Radiation-Resistant Image Sensor & Camera Business Development, design, and manufacturing of image sensors and cameras with world-class radiation resistance 3) Development and Design Contract Services Development and design of software, firmware, and networks for electronic devices and optical equipment 4) Joint Research and Development Projects Joint research and development with the Japan Aerospace Exploration Agency (JAXA) (ongoing for a long time) Industry-academia-government collaboration (MACH, TUAT, NICT) and advanced semiconductor development projects (ongoing for a long time)
We respond to various customer requests, from individual parts to completed products, solely from engineering!
■ Design and manufacturing of standard components used in the aerospace, space, and defense fields (washers, clamps, brackets, etc.) ■ Design and manufacturing of aerospace, space, and defense equipment parts ■ Sheet metal parts, machined parts, enclosure assembly, and structural assembly for aerospace, space, and defense ■ Wiring assembly and circuit board mounting for aerospace, space, and defense electronic devices ■ Various special process operations ■ Dispatch services (aircraft structural material assembly, maintenance assistance, electronic device wiring assembly, mounting work, etc.)
We handle a wide range of parts for aircraft, missiles, rockets, and satellites.
■Aerospace Defense System Equipment ■Aerospace Components ■Aerospace Advanced Materials ■COX Division
The track record of power supply devices for ultra-small satellites is the highest in the industry! We offer a lineup of power supply devices for Cube-Sats ranging from 1U to 6U and for weights between 20kg and 50kg!
Business activities include: ● Development of power control devices for space applications ● Development of battery modules for space applications ● Development of power supply devices for ground applications ● Electronic circuit design (digital/analog) ● Embedded software development ● Design and manufacturing of enclosures and structures ● Research and development of energy storage devices and materials for space applications, including space demonstration ● Provision and hosting of management and operational training programs for lithium-ion battery handling ● Manufacturing of components for ultra-small satellites
Certified calibration facility and authorized dealer of the U.S. flow meter manufacturer Cox (Badger Meter). We perform calibration and sales of petroleum-based flow meters.
■ Calibration of oil flow meters at our domestic factory ■ Calibration of other flow meters (for gases, etc.) (Calibration outsourced to the United States) ■ Sales of flow meters and associated equipment
We provide new technology.
■ Design, development testing, and maintenance of aerospace equipment ■ Design, manufacturing, and various testing of industrial machinery ■ Design and development testing of information and communication equipment ■ Design and development of automotive-related equipment ■ Design and development of software ■ Design, manufacturing, installation, and dispatch of testing equipment and peripheral devices related to the above
High quality, short delivery time, low cost - Wire harness design and manufacturing.
【Business Content】 - Design and manufacturing of wire harnesses (We will make proposals based on your requests and concerns.) 【Specification Examples】* We will propose components based on various requests. - MIL-DTL-38999, MIL-DTL-26482, MIL-DTL-83723, MIL-DTL-5015 - General RF (coaxial) connectors - D-SUB, MICRO-D-SUB connectors - MIL-STD-1553 (including ARINC, etc.) - General domestic connectors - Others (fiber optic cables, thermocouple cables, etc.) 【Quality Assurance System】 - We have obtained the quality management system JIS Q 9100, specialized for the aerospace and defense industries. - In addition to thorough quality control, we also focus on traceability to provide high-quality services.
Leave your requests for aircraft-related equipment and 3D measurement devices to us!
Main Sales Items ■ Sales of aircraft-related equipment and defense-related equipment
Leave your aircraft ground support equipment (GSE) needs to us.
■Manufacturing, testing, sales, and maintenance of GSE (Ground Support Equipment related to aircraft) - Aircraft power supply (400Hz) self-contained, suspended, towed / blowers / reels / cables (MIL standard compliant) / connectors (MIL standard compliant), etc.
We provide solutions tailored to our customers based on the technology and know-how developed in our pursuit of "Made By AERO."
【Aerospace Division】 ◎ Structural assembly and outfitting ◎ Painting ◎ Rework (repair) We act on behalf of contractors who deliver to major clients from distant locations. ◎ Staffing ・ Assembly technicians ・ Inspection engineers ・ Production engineers ・ Designers (aircraft, jigs) ・ CATIA operators ・ Aircraft-related administration 【Industrial Equipment Division】 ◎ Image processing systems ・ Inspection devices ・ Recognition devices ・ Robot vision ・ All other applicable items that can be handled by image processing systems. ◎ Conveying equipment ・ Design and manufacturing of conveyors ◎ Staffing ・ Mechanical assembly technicians ・ Electrical assembly technicians ※ The Industrial Equipment Division also accepts inquiries for fully automated systems that combine image processing and conveying equipment. 【Overseas Division】 ◎ Sales of consumables ◎ Sales of parts ◎ Sales of tools (hand tools, power tools) Aero is registered as the domestic agent and support center for the German power tool manufacturer, Rubring. ◎ Import and export agency ◎ Solution consulting for overseas companies
Since our establishment, we have been committed to responding to various requests as a specialized trading company in the defense and aerospace industry, based on the principles of "integrity, trust, and gratitude."
1. Import and sale of aircraft, space equipment, communication electronic devices, etc. 2. Import and export of general industrial machinery and sales, as well as sales agency for domestic manufacturers. 3. Import and sale of explosive products. 4. Import and export of chemical products (paints, adhesives, etc.) and sales.
If it's about the manufacturing of aerospace-related parts and composite adhesive parts, precision machining, can manufacturing, and water jet processing of difficult-to-cut materials, etc.
Aerospace-related component machining Machining of special materials using water jet technology
Jamco's "Aircraft Equipment Manufacturing Business" leverages its track record in manufacturing aviation components to aim for new entry into the construction industry and engine sectors for plants.
Aircraft lavatories for major airlines Galleys (kitchen equipment) Manufacturing of seats
We have technology that meets trust.
Design and manufacture of physical and chemical experimental apparatus Manufacture of semiconductor manufacturing equipment components Design and manufacture of aircraft component manufacturing equipment
Founded in 1968, we have been supported by local customers for 50 years. We are a company that aims to contribute to the community with a bright and enjoyable spirit, always remembering to be grateful.
◆ Aviation Division (Manufacturing Industry) - Honeycomb core processing - Sewing processing - Jig manufacturing (FRP) - JISQ9100 certification - NADCAP certification - Eco Action 21 certification ◆ Furniture Division (Retail/Service Industry) - Wooden furniture sales - Interior design - Office furniture/fixture sales - Office layout/design/interior construction - Space proposals - Wine sales - Wine goods sales - Original label creation - Furniture repair - Interior green sales - Interior coordinator on staff - Karimoku Meister on staff - Wine expert on staff - General construction industry (interior finishing work) Tochigi Prefecture Governor License No. 013085 - Liquor sales business U-Sake 1 No. 185/192
We provide comprehensive design for aerospace, space, automotive, and machine tools.
■Comprehensive engineering focused on development and design primarily in industrial machinery, aerospace, and automotive-related businesses ・Contract design business ・Business contracting services ・Worker dispatching services
Expert in aircraft manufacturing!
【Business Activities】 ■ Contracted services in the aircraft-related industry (assembly, quality control, production technology, production management, etc.) ■ Contracted services in aircraft-related education ■ Dispatch of aircraft-related engineers and workers, etc.
YSEC Co., Ltd. specializes in processing difficult-to-cut materials and also supports prototype processing.
○Manufacturing of aircraft equipment and engine parts ○Precision parts processing and manufacturing for defense equipment, medical devices, and nuclear equipment
High precision, high quality, high reliability / Precision equipment manufacturing and repair
- Manufacturing of angle sensors (encoders) - Manufacturing of inertial sensors (gyroscopes), accelerometers, and related equipment - Manufacturing and repair of aerospace, space, and defense-related products - Specific labor dispatch
We will challenge ourselves to the sky and to space with technology.
Manufacturing of aircraft wire harnesses Manufacturing of environmentally resistant special harnesses Design and manufacturing of various testing equipment Design and manufacturing of automatic circuit testers
From Kyushu to Space! Towards the realization of a near real-time observation data provision service using a small SAR satellite constellation.
1. Research and development, design, manufacturing, sales, operation, management, and maintenance of artificial satellites, equipment mounted on artificial satellites, precision machinery, electronic devices, ground facilities, software, and information communication networks. 2. Business related to data acquired by artificial satellites and similar entities. 3. Provision of services utilizing artificial satellites and similar entities. 4. Planning and management of study groups, training sessions, and seminars related to space technology. 5. Technical consulting, operational support, contracting, development guidance, lectures, education, and writing related to the above items. 6. All operations incidental to the above items.
Leave the precision machining, vacuum heat treatment, and assembly and maintenance work of aerospace machinery, power generation facilities, high-speed railway vehicles, and industrial equipment parts to us.
Precision machining, vacuum heat treatment, and assembly and maintenance work of units for aerospace machinery, power generation facilities, high-speed railway vehicles, and industrial equipment parts.
Now is the time to connect! We will continue to innovate as a company that plays a part in the aerospace industry.
【Business Overview】 ■ Production technology, design, and assembly contracting for aerospace equipment ■ Assembly of railway vehicles ■ Specified worker dispatch business
We promise tomorrow's aerospace quality with advanced technology and know-how.
○Consistent order production of precision machined parts ○Processing and assembly of interior components for aviation and railways
Enrich your creativity in manufacturing! Manufacturing is about building people.
- General machining - General mold making - General welding/assembly - Consulting for establishing machining/quality assurance systems - Development/sales of "business management system software" for the manufacturing industry
Leave the design and development of winged reusable rockets to us.
■Design and development of winged reusable rockets (spaceplanes) ■Development, manufacturing, and sales of components ■Planning and proposals for space-related events, etc. ■Other related businesses
Leave everything related to drone remote control to us.
■Import and export as well as sales of drone remote control devices.
Leave it to us for cutting processing of aerospace machine parts and manufacturing of industrial machinery and specialized machine parts.
Aerospace-related Aerospace equipment parts machining Jig manufacturing for machining tools Manufacturing and sales of standard parts for jigs General machining parts Tooling parts Manufacturing of industrial machinery and specialized machine parts Thin material processing Various types of machining Machining processing Multi-tasking lathe NC lathe
Antenna and transmission technology supporting a highly information-oriented society!
■Design, manufacturing, adjustment, construction, and sales of antennas and related products ■Research and development of antennas and related technologies ■Rental of antennas and related equipment
Faster, freer, and safer! We provide a new platform for the manufacturing industry to create a warm society that considers the environment.
■ Development, manufacturing, and sales of aircraft systems and equipment ■ Import and sales of materials for aircraft and space ■ MRO business for aircraft equipment ■ Manufacturing, sales, and services of automotive safety equipment ■ Construction and proposal of mobile operation management systems ■ Development, manufacturing, and sales of electronic devices in various industrial fields ■ OEM production of the above ■ Special, large, and precision machining using large machine tools ■ Contract processing for special processes (heat treatment, chemical treatment, non-destructive testing), etc. ■ Distribution support for idle inventory materials and parts that remain in various companies for long periods
Abitech will support your business as a bridge connecting excellent technology and the market!
- Aerospace defense equipment import and sales - Aerospace-related software license sales - Sales agency for aerospace defense products - General industrial product sales
As a member of Japan's manufacturing industry, we will deliver high quality to the world.
■Various design tasks ■Surface mount tasks ■DIP and soldering tasks ■Assembly and harness processing tasks / Inspection tasks ■Special tasks and parts replacement tasks ■Spacecraft design and manufacturing
As a comprehensive engineering company, we continue to challenge ourselves and evolve.
■ Development, design, production technology, and testing analysis in the aerospace and automotive fields ■ Development and design of precision instruments, industrial machinery, and conveying equipment ■ Design, manufacturing, and sales of various specialized machines and electrical control equipment ■ Development and design of electrical and electronic devices ■ Development of software and firmware
Total support for the industry through a variety of space-related services.
■ Development, design, manufacturing, and sales of auxiliary components and devices for aircraft and space rocket engines ■ Design and manufacturing of space environment utilization equipment and ground support devices ■ Design, manufacturing, and maintenance renovation of test equipment for space rockets ■ Development, design, manufacturing, and sales of pipe fittings, valves, and other piping supplies and related assemblies ■ Development, design, manufacturing, processing, and sales of pressure vessels and auxiliary components
One-stop solution for the development of automatic testing and measurement systems, as well as related software development.
Main Business [1] Testing and Measurement System Development: System development and maintenance services for the aerospace industry and railway vehicle industry [2] Trading Business: Import and sales of high-functionality and high-performance electronic devices and systems [3] Consulting Business: Research and studies, support for international standards, operation of ATE consortium
We support space with passion and technology.
【Business Overview】 ■Eastern Japan Division ・Handling of high-pressure gas-related matters ・Providing technical services such as statutory inspection of various equipment, operation and maintenance management of electrical and air conditioning systems, etc. ■Southern Japan Division ・Mainly responsible for a wide range of services centered on the operation, maintenance, and management of lifeline facilities related to rocket launches at the Tanegashima Space Center.
Aiming to create products that meet and impress our customers.
We perform machining of difficult-to-cut materials through metal cutting processing. ■Handled metal items Titanium, high-speed steel, PX5, SKD, Inconel, aluminum, aluminum alloys, resins, castings, copper, brass, ceramics, general SUS series, carbon steel, hardened materials, and others. Aircraft parts manufacturing Automotive parts manufacturing Machining hydraulic jigs Aluminum molds