List of Materials products
- classification：Materials
9691～9705 item / All 37788 items
It won't break even after 1 million repetitions! A mat switch with reliable operation, high durability, and low price. Suitable for options in machine tools as well. Please consult us about delivery t...
- Sensors
We can accommodate high resistance over 10,000 ohms, with diameters ranging from approximately 30 mm to 8 inches, and we also offer thinning and chip processing arrangements!
- Other semiconductors
- Processing Contract
- Wafer
![[BYK-UV 3590] Silicone-based surfac...](https://image.mono.ipros.com/public/product/image/9e3/2001534644/IPROS8524045464685195140.jpg?w=280&h=280){kind=small}
Highly active silicone-based surface modifier for UV curing systems.
- Other polymer materials
Silicone-based surface modifiers with leveling and defoaming effects for solvent-based and non-solvent-based applications.
- Other polymer materials
![[BYK-DYNWET 810] Water-based silico...](https://image.mono.ipros.com/public/product/image/7a8/2001534719/IPROS11348792240715285944.jpg?w=280&h=280){kind=small}
Silicone-free wetting agent that reduces dynamic surface tension for aqueous systems.
- Other polymer materials
Cumen-free, silicone-containing defoamers for potting agents and sealing materials optimal for polyurethane or epoxy systems.
- Other polymer materials
Silicone-free defoamers for solvent-based and solvent-free UP systems, further improving the wettability of fibers.
- Other polymer materials
Are you struggling with rubber burrs? Review your process to reduce complaints and re-inspection time!
- Rubber
- Contract manufacturing
- Processing Contract
★Attention Quality Control Personnel★ Are you struggling with leftover rubber burrs? Are you applying sufficient pressure? Reviewing the pressure can solve your rubber burr issues.
A common complaint about rubber products is "flash remaining." "There is rubber flash left on the product." "Can't we finish the flash more neatly?" When molding rubber, the rubber material is sandwiched in a mold and heated, so any parts that protrude from the mold become rubber flash. A frequent cause of flash remaining is the case where "the press pressure is weak and it hasn't been fully pressed." *For more details, please download the catalog or contact us.*
Made in Taiwan! Easy and accurate torque control, with improved durability. Utilizing the electromagnetic hysteresis effect, it provides torque reliably and smoothly!
- brake
- magnet
A permanent magnet electromagnetic brake that achieves high-speed response through backlash-free design.
- clutch
- brake
- magnet
The global market is expected to significantly expand, reaching a valuation of 36 billion USD by 2032, up from 23 billion USD in 2025.
- Chemicals
- Other services
- others
Our company, which specializes in the production of aluminum processed products used in industrial machinery, automobiles, and machine parts, provides a clear explanation of the excellent properties o...
- aluminum
Numerous achievements in a wide range of industries such as robotics, automotive, and medical. Flexible support from material supply to cutting, processing, pressing, welding, and assembly!
- aluminum
Significant contribution to your company's Scope 3 emissions reduction: Low CO2 steel (green steel) produced with electric furnaces and renewable energy.
- Steel
Is recycled rubber harmful? With the right recycled rubber, it is possible to create environmentally friendly and sustainable rubber products!
- Rubber
- Contract manufacturing
- Processing Contract
I thought costs would go down, but the workload increased... Solved by re-evaluating recycled rubber! Introducing case studies on rubber materials, rubber molding, sustainability, and problem-solving!
In rubber products, recycled rubber, which is made by recycling materials like used tires, may be used. The advantages of using recycled rubber include "being sustainable as it is a recycled product" and "lower cost compared to regular rubber materials." However, there were concerns that "mixing inexpensive recycled rubber to reduce costs did not work well," resulting in "twice the usual molding time" and "an increase in defects." Upon investigation, it was found that "the curing time for the rubber was taking more than twice as long" and "gas release was becoming worse." The properties of recycled rubber can vary significantly depending on the quality of the rubber before recycling, and this tendency is more pronounced in lower-grade, inexpensive products, making it difficult to maintain consistent quality. Therefore, when we used recycled rubber that had a proven track record in our company, we were able to achieve "normal curing times" and "a significant reduction in defects." For more details, please download our case study or feel free to contact us.
Worn out after just one week of use" "Unable to achieve the desired effect" "We contribute to improving productivity by proposing appropriate rubber materials!
- Rubber
- Contract manufacturing
- Processing Contract
★A must-see for those in the production field★ "Worn out within a week of use" "Unable to achieve desired effects" We propose suitable rubber materials!
In the manufacturing process, there are often needs such as "not wanting to conduct electricity," "wanting a firm grip," and "wanting to prevent oil and water leaks." For these reasons, "rubber" is often used. On the other hand, that "rubber" is also frequently used in environments exposed to ultra-high concentrations of acidic chemicals or organic chemicals, as well as high and low temperatures. As a result, issues arise such as, "It becomes ragged in a week, rendering the rubber useless," and "Despite not wanting to conduct electricity, it ends up conducting electricity, leading to a mountain of defects." We will solve such problems. *For more details, please refer to our case studies or feel free to contact us. Shinei Rubber Industry primarily manufactures and sells rubber products ranging from hand-sized to over one meter. <What Shinei Rubber Industry can do> - Rubber material formulation design: Creating rubber recipes to meet required standards. - Material mixing and prototype molding: Confirming consistency with required standards and stability during mass production transition. - Mass production with specified formulations: Establishing mass production processes based on predetermined formulations. - Transfer-type acceptance: Responding quickly to the transfer of fluid products (with transfer achievements in as little as one week).
I want a single rubber product. No need to create a mold, significantly reduce the man-hours for manufacturing and developing rubber products! Recommended for initial development.
- Rubber
- Contract manufacturing
- Processing Contract
★A Must-See for Product Development Managers★ "One-of-a-Kind" Rubber Products Wanted! Produce rubber products without making molds, achieving a significant reduction in development time. Case studies are currently being introduced.
We often receive inquiries about whether it's possible to create 'one-of-a-kind' rubber products. In response to such inquiries, are you told, 'It's difficult without a mold' or 'The material lot doesn't match,' and then you give up? Are you paying high mold costs for prototypes, even though there's a possibility of shape changes or rejection, or are you forced to mass-produce without being able to confirm functionality? Good news for those in such situations! It is possible to create 'one-of-a-kind' rubber products and reduce the development time and costs. Rubber products are often used as 'one part of a machine.' Therefore, as development progresses, the shape or required properties may change. The solution to such concerns is prototyping rubber products through 'machining.' This is perfect for shape confirmation and functionality checks during development! We can accommodate a wide range of sizes, from small items about 3 centimeters, like those in the photo, to larger items that are about the size of both hands, and even long items around 90 centimeters. Since we do not create molds, we can reduce the lead time and costs by about 50% to 80%. *Please note that there are conditions regarding materials and compatible shapes. For more details, feel free to contact us.