List of Measurement and Analysis products
- classification：Measurement and Analysis
9196～9210 item / All 53541 items
Presentation of explanatory materials on JIS and ISO standards. We propose suitable safety barriers from a rich product series! Free rental of demo kits.
- Other safety and hygiene products
You can download a free booklet that introduces the uses, structures, and examples of various types of frames.
- Other machine tools
- Solar power generator
- Other energy equipment
Solar cell 6-inch cell compatible PL excitation light source. By combining with the EL image inspection device PVX series, PL observation becomes possible.
- Image Processing Equipment
- Image Processing Software
- Defect Inspection Equipment
Industry standard that vividly reveals potential defects in solar cells, EL image inspection device PVX330.
- Microscope
- Image analysis software
- Defect Inspection Equipment
It is also possible to analyze many material properties such as Young's modulus, plastic hardness, plastic deformation amount, elastic ratio, and creep! Variations in hardness and other properties can...
- Other measurement, recording and measuring instruments
Material evaluation using ultra-micro hardness testing for metals, polymers, plastics, etc.
Our company can perform ultra-microhardness measurements on various materials such as metals, polymers, plastics, and ceramics. Additionally, since hardness can be quantified, the characteristics of the materials become clearer. The ultra-microhardness tester "Fischer scope H100" measures by gradually increasing the load up to the set value, allowing for continuous profiling of hardness and indentation depth from the surface, as well as information on the effects on the material. By determining hardness values from the depth of penetration of the indenter into the material and the load/penetration depth curve after unloading, it is possible to analyze many physical properties beyond hardness, such as Young's modulus, plastic hardness, plastic deformation amount, elastic ratio, and creep. Please feel free to contact us if you are considering evaluating the characteristics of materials. *For more details, please refer to related products and catalogs, or feel free to contact us.
GC-MS is used for qualitative and quantitative analysis of low molecular organic substances! Data was obtained and compared using incense and sandalwood!
- Analytical Equipment and Devices
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
The observation target is an IC chip connected to the LCD panel using the COG mounting method! The circuit surface was clearly visible.
- Contract Inspection
- Other contract services
Observation of Conductive Particle Shape in COG Implementation
We will introduce the observation of the shape of conductive particles in COG implementation. ICs and liquid crystal panels are implemented using the COG method with ACF (anisotropic conductive film). A resin ball is used as the core, and a metal layer (such as nickel or gold) for conductivity is deposited on its surface. During connection, the particles deform appropriately to electrically connect the IC and the panel. To confirm the degree of particle deformation and connection status, cross-sectional observations were conducted, revealing that the particle deformation was at a "medium" level, indicating an appropriate degree of deformation. By examining the deformation of conductive particles from both the planar and cross-sectional directions, we can explore the correlation with display defects. Please feel free to contact us for any inquiries regarding panel-related defects.
It is possible to set bad standards (current values)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.
- Testing Equipment and Devices
Reverse bias test of power devices (up to 2000V)
At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to a maximum of 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, if one device fails during the test, it will not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Specifications and Service Details】 ■ Test Voltage: Up to a maximum of DC 2000V ■ Applied Current: Up to a maximum of 14mA ■ Number of Test Devices: Up to a maximum of 8 (independent power supply) ■ Compatible Modules: TO-247, TO-220, etc. (other packages require consultation regarding connection methods) ■ Measurement Content: Monitoring of leakage current ■ Temperature Range: Up to a maximum of 200°C (85°C/85% in high temperature and high humidity conditions)
Implemented by a partner company! Forcibly inducing condensation on test samples to reproduce the condensation state.
- Contract Analysis
Condensation cycle test
Condensation caused by rapid changes in temperature and humidity can lead to corrosion of products and leaks or malfunctions due to ion migration. The "Condensation Cycle Test" involves temperature changes and humidification to forcibly and repeatedly generate condensation for evaluation against condensation. Additionally, we can observe the time-dependent changes before and after the condensation test, so please feel free to contact us if you need assistance. *For product details, please refer to the product page and catalog below.
Focusing on sandalwood (Byakudan), which is used as a raw material for incense! Here is an example of component analysis using GC-MS.
- Contract Analysis
- Analytical Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
It is also possible to estimate the relationship with molecular-level structures! Introducing the types of thermal analysis and the properties that can be understood.
- Analytical Equipment and Devices
Strain measurement of power module package resin.
We would like to present the results of strain measurements conducted by attaching strain gauges and thermometers to the surfaces of power modules, both in the mounted state on a circuit board and in the unmounted state. In the mounted module, a slight delay in temperature change was observed, and correspondingly, the change in strain also appeared to be delayed. This is believed to be due to the slower transfer of heat to the module when it is mounted. At Aites, we conduct temperature cycle tests and temperature-humidity cycle tests, during which we can simultaneously measure the strain occurring in the mounted components. Please feel free to consult with us.
Support from the design and fabrication of test boards! An effective method for comparing the capabilities of multiple products.
- Testing Equipment and Devices
Continuous Power Supply Test for Multilayer Ceramic Capacitors
We would like to introduce our "Continuous Power Supply Test for Multilayer Ceramic Capacitors." Assuming the failure mode is a short circuit, we can conduct a continuous power supply test under high temperature and high humidity conditions while continuously measuring the changes in leakage current with direct current voltage. We believe this is an effective method for comparing the performance of multiple products by manufacturer, lot, etc. Additionally, we will support you from the design and fabrication of the test board.
We assist in manufacturing and research and development with a focus on SDGs by conducting comparative analysis and evaluation of recycled materials and raw materials using multiple methods.
- Water quality testing
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Data] Cross-sectional observation ...](https://image.mono.ipros.com/public/product/image/cc1/2000561879/IPROS02201267418243097889.png?w=280&h=280){kind=small}
We have published cross-sectional observations of the fracture surface and elemental maps of the fracture area!
- Contract Analysis
- Contract Inspection
- Contract Analysis
![[Data] Cross-sectional observation ...](https://image.mono.ipros.com/public/product/image/5fd/2000561894/IPROS71970030245724406256.png?w=280&h=280){kind=small}
We have published cross-sectional observations in clear vision mode and normal/standard mode!
- Electron microscope
- Contract Analysis
- Contract Inspection
![[Information] Cross-section product...](https://image.mono.ipros.com/public/product/image/af8/2000561898/IPROS63317862882694229775.png?w=280&h=280){kind=small}
We are publishing the main cross-section manufacturing methods, processing conditions, advantages & disadvantages, etc.!
- Contract Analysis
- Contract measurement
- Contract Inspection
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
![[Data] Example of load unloading mo...](https://image.mono.ipros.com/public/product/image/7dd/2000575697/IPROS18580049785747147333.png?w=280&h=280){kind=small}
Examples of hardness measurement for color filters and results obtained from hardness measurements using graphs are provided.
- Other measurement, recording and measuring instruments