List of Measurement and Analysis products
- classification：Measurement and Analysis
8911～8955 item / All 53349 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
We will elucidate the characteristics at the molecular level using our FT-IR and thermal decomposition GC-MS!
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
It is possible to perform non-destructive testing from fault location identification to internal observation! High-precision identification of heat generation areas can be achieved.
- Contract Analysis
Case study of failure analysis of oxide-based all-solid-state batteries
We will introduce a case where a series of analyses from failure location identification to cross-sectional observation was conducted on oxide-based all-solid-state batteries that were destroyed by reliability testing. Thermal analysis revealed a tendency for strong heat generation on the side, and X-ray transmission observation showed a white linear contrast anomaly near the boundary where heat generation was observed in the X-ray transmission image. It is suspected that some abnormality is occurring in the white line area. When cross-sectional SEM observation was performed on the area where the anomaly was visible, layer delamination was observed. It is speculated that the positive (negative) electrode layers expanded and contracted repeatedly due to reliability testing, leading to delamination between the current collector and the electrolyte layer.
![[Example of TOF-SIMS] Analysis of L...](https://image.mono.ipros.com/public/product/image/e37/2000653179/IPROS00080532195674667298.png?w=280&h=280){kind=small}
It is possible to detect with high sensitivity! We will introduce a case comparing the analysis of Li using TOF-SIMS and SEM-EDX.
- Contract measurement
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
We conducted visual inspections and internal observations using X-ray CT for normal products and degraded products!
- X-ray inspection equipment
- Other inspection equipment and devices
By evaluating the orientation, strain, and birefringence of the material, you can understand the internal stress and strain state!
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
It is possible to visualize birefringent phase differences (distortion) and the flow direction/stress direction (principal axis orientation)!
- Contract Analysis
- Other contract services
Focusing on the position and composition of the foreign object! We prepared a cross-section of the foreign object and conducted elemental analysis.
- Surface treatment contract service
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
If you're having trouble with LCD analysis, we at ITES are here to help you find a solution!
- Contract Analysis
Observation of Conductive Particle Shape in COG Implementation
We will introduce the observation of the shape of conductive particles in COG implementation. ICs and liquid crystal panels are implemented using the COG method with ACF (anisotropic conductive film). A resin ball is used as the core, and a metal layer (such as nickel or gold) for conductivity is deposited on its surface. During connection, the particles deform appropriately to electrically connect the IC and the panel. To confirm the degree of particle deformation and connection status, cross-sectional observations were conducted, revealing that the particle deformation was at a "medium" level, indicating an appropriate degree of deformation. By examining the deformation of conductive particles from both the planar and cross-sectional directions, we can explore the correlation with display defects. Please feel free to contact us for any inquiries regarding panel-related defects.
Comprehensive analysis is possible! Here are examples of analysis using the EPMA guide network map method.
- Contract Analysis
Reliable application with the contact confirmation function of the applied pin! Compatible with direct charging method and electric field induction method.
- Contract measurement
From DUT board production to testing! We propose and conduct tests according to your requests and objectives.
- Contract measurement
Not only the joints of electronic components, but also the evaluation of fixed parts such as screws!
- Testing Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
Supports high temperatures up to 180℃! Effective for testing and evaluating automotive and high-temperature electronic components and other heat-resistant parts.
- Testing Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
Confirmation methods for low molecular weight siloxanes! It is also possible to analyze the amount of occurrence.
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Data] Analysis of Polycarbonate De...](https://image.mono.ipros.com/public/product/image/820/2000700625/IPROS00006365835140416369.png?w=280&h=280){kind=small}
For material evaluation and defect analysis! We will discuss the applied load and degradation mechanisms based on the differences in decomposition products.
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Information] Differentiating Betwe...](https://image.mono.ipros.com/public/product/image/e70/2000701513/IPROS38819552626942510479.png?w=280&h=280){kind=small}
Comparing optical microscopes and SEM with the same sample! I will explain the advantages and disadvantages.
- Contract Analysis
- Other contract services
Detecting characteristic X-rays! An effective analytical method for obtaining elemental information in micro-regions and small foreign substances.
- Analytical Equipment and Devices
- Contract Analysis
![[Example of TOF-SIMS] Wide-area ima...](https://image.mono.ipros.com/public/product/image/b40/2000719211/IPROS94475967595340691669.png?w=280&h=280){kind=small}
Wide-area image map driven by stage! Introducing a measurement example that visualizes the distribution of magic.
- Contract measurement
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Information] GC-MS Analysis Device...](https://image.mono.ipros.com/public/product/image/a7c/2000723266/IPROS7695045415989313780.png?w=280&h=280){kind=small}
Introducing the sample introduction device and the types of analytical samples and analysis content that each device specializes in!
- Analytical Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
![[Data] Analysis and evaluation of o...](https://image.mono.ipros.com/public/product/image/8f2/2000723283/IPROS22102846580105840172.png?w=280&h=280){kind=small}
Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.
- Analytical Equipment and Devices
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
![[Data] GC-MS analysis by solvent ex...](https://image.mono.ipros.com/public/product/image/12f/2000735743/IPROS80847653141510105905.png?w=280&h=280){kind=small}
I will introduce examples of comparing the components of color developers contained in thermal paper using solvent extraction!
- Contract measurement
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Cross-section production of soft materials has also been realized! 3D reconstruction is possible with Auto Slice & View!
- Analytical Equipment and Devices
Announcement of the introduction of Talos F200E
Our company will introduce the FEI "Talos F200E" transmission electron microscope system. Compared to conventional models, the resolution for TEM and STEM has improved, and performance has been significantly enhanced, allowing for EDS analysis with four detectors. Additionally, it is equipped with features such as drift-corrected frame integration (DCFI), which accumulates multiple frames while correcting for drift.
Comparing thermal properties with DSC! We will discuss the impact of type identification and the state of polymer molecular chains on material properties!
- Analytical Equipment and Devices
- Contract measurement
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
With Solamente SR-200, panel inspection before interconnection is possible.
- Other inspection equipment and devices
We will respond to your request to evaluate roundness and circularity!
- Contract measurement
Observation of thermal deformation using a 3D shape measuring machine (VR-6200)
This is a measuring device that can non-contact measure surface shapes such as concavities, undulations, and surface roughness. We will introduce "heating deformation observation" using a 3D shape measuring machine. First, we acquire a 3D texture image at room temperature, and then we acquire a 3D texture image in the heated state. By overlaying the texture images before and after heating and checking the differential texture image and cross-sectional profile, it can be seen that the substrate in the heated state has higher ends and a lower center compared to the room temperature state.
Cross-sectional observation and hardness measurement of the weld joint were conducted! It was found that the void in the center is a blowhole.
- Other measurement, recording and measuring instruments
- others
Cross-sectional hardness of aluminum welds (spot welding)
We conducted hardness measurements on aluminum spot welds that were subjected to cross-sectional observation, and we would like to present an example of the trends observed in Vickers hardness, Young's modulus, and elasticity ratio. X-ray radiographic observation confirmed the presence of voids within the weld. Cross-sectional observation revealed that the central void was a blowhole. Furthermore, the results of the hardness measurements indicated that the area near the blowhole was hard but had low stiffness and was prone to deformation, while areas slightly away from the blowhole exhibited higher stiffness and were somewhat brittle. For more detailed information, please refer to the related products and catalogs.
The aldol reaction progresses under the influence of temperature, humidity, and light! Example of impurity analysis in ethanol and acetone.
- Analytical Equipment and Devices
- Contract Analysis
- Other contract services
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Reproducing temperature stress during transportation! Evaluating the presence or absence of delamination and cracks through heat treatment.
- Testing Equipment and Devices
Measurable contrast ratio and color temperature! Quantitative evaluation of changes in optical properties.
- Spectroscopic Analysis Equipment
- Contract measurement
Spectral radiance and chromaticity evaluation of liquid crystal displays.
Our company can measure the optical properties of LCD displays and OLEDs using a spectroradiometer. By conducting measurements before and after testing, we can quantitatively evaluate changes in optical properties. Spectral radiance is measured in four patterns: white, red, green, and blue. It is possible to measure various optical properties such as luminance, chromaticity, and dominant wavelength. *For more details about the products, please refer to the product page and catalog below.
When a substance undergoes a phase transition due to a temperature change, a change in thermal energy occurs.
- Contract measurement
Measurement of the transformation temperature of shape memory alloys.
When a substance undergoes a phase transformation due to a change in temperature, a change in thermal energy occurs. Shape memory alloys are alloys that have the property of returning to their original shape when deformed and heated above a specific temperature. The manifestation of shape memory is due to a phase transformation (martensitic transformation). By capturing the thermal energy change during the transformation using DSC, we measured the transformation temperatures of three types of shape memory alloy products and investigated the relationship with their composition through elemental analysis. When a deformed wire is immersed in hot water, it instantly returns to its original shape.
Observe the state of the compound from the direction of the back and the surface! We will consider and propose processing, pretreatment, observation methods, and combinations.
- Contract Analysis
- Analytical Equipment and Devices
Examples of observing intermetallic compounds through etching treatment.
The method of processing the observation samples may result in different information being obtained. You may have observed the solder joints in two dimensions from a cross-section, but have you ever wondered how the compounds are growing in three dimensions? In this document, we present examples of observations of the Cu pad and solder joint. We include both "cross-sectional observation" and "planar observation." For more details, please refer to the related products and catalogs below.
Automobiles, paints, construction, plastics, printed materials, textiles, etc.! They are adopted as tests in various fields.
- Testing Equipment and Devices
- Weather resistance test
- Environmental Test Equipment
Accelerated Weathering Test <Xenon Weather Meter>
The "Xenon Weather Meter" is an accelerated weathering test device that uses a xenon arc lamp as its light source. By combining exposure conditions such as irradiation, temperature and humidity, and rainfall, it artificially reproduces outdoor and indoor environments, allowing for the evaluation of weather resistance and light resistance of test specimens in a shorter time than natural exposure tests. The xenon lamp used as the light source has a spectral distribution that closely approximates the ultraviolet and visible parts of sunlight, with precise control over the use of appropriate filters and irradiance. This enables tests with good correlation and reproducibility to outdoor exposure. This testing is conducted as a service by our partner companies. For more detailed information, please refer to related products and catalogs.
Send compressed air at the specified pressure and hold for a set time! Check for any leaks.
- Testing Equipment and Devices
Pressure Repeated Test
The "Pressure Repetition Test" involves supplying compressed air at a specified pressure to products that require airtightness, in order to check for any leaks. It is also possible to conduct a durability test that alternates between pressurized and released states, and this can be performed in a heated state in combination with an environmental testing chamber. Additionally, it is possible to confirm the timing of any leaks from the logged pressure data.
It is also possible to create master curves in tensile, shear, and bending modes other than compression mode!
- Analytical Equipment and Devices
Evaluation of tensile properties using a stretch gauge for high-stretch flexible materials.
We would like to introduce the "Tensile Property Evaluation using Extensometers for High-Elasticity Flexible Materials" that we offer. Tensile tests of NR rubber will be conducted using contact-type (suitable for high-elasticity and soft materials) and non-contact type (video) extensometers, and the results will be compared. To accurately determine strain in tensile tests, it is necessary to select the appropriate extensometer and testing conditions based on the target material and measurement objectives. We will provide suggestions tailored to your consultation needs.
Spectroscopic analysis is suitable for component analysis and qualitative analysis of foreign substances.
- Testing Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
The purity of the electrolyte greatly affects the performance of the battery! It suppresses the volatility of sulfur components and converts them into a form that can be detected by IC.
- Analytical Equipment and Devices
Composition analysis of LIB cathode active materials by ICP luminescence analysis.
This presentation introduces the composition analysis of active materials in cathode materials using ICP emission analysis. The cathode material in lithium-ion batteries (LIB) is one of the important components that influence the battery's voltage and energy density, and the composition of the cathode material significantly affects the battery's performance. ICP emission analysis allows for qualitative and quantitative analysis of approximately 70 elements, primarily metal elements. In addition to composition analysis of LIB cathode materials, it can also be applied to various analyses, including qualitative and quantitative analysis of additives and impurities contained in samples, as well as quantitative analysis of substances regulated by the RoHS directive.
Industry standard that vividly reveals potential defects in solar cells, EL image inspection device PVX330.
- Microscope
- Image analysis software
- Defect Inspection Equipment
Microscopic PL observation of the fine structure of wafers in the solar cell manufacturing process.
- Image Processing Equipment
- Defect Inspection Equipment
- Contract measurement
The String Checker SZ-200 can identify solar panel failures on a string-by-string basis.
- Other inspection equipment and devices
We conduct environmental testing, as well as non-destructive observation and electrical property measurements.
- Analytical Equipment and Devices
- Analysis Services
Appearance observation and measurement services
We would like to introduce our "Appearance Observation and Measurement Service." We are equipped with a variety of devices to meet your needs, including appearance observation before and after reliability testing, solder joint observation, as well as dimensional measurements and surface roughness measurements of various components. You can also leave the pre-observation processing to us. Our company has IPC-certified IPC specialists on staff. We provide assistance with observations, consultations, and solutions to various observation-related concerns in accordance with international standards.
Inspection equipment effective for initial observation of various components and materials, including implementation substrates and electronic parts.
- X-ray inspection equipment
- Other inspection equipment and devices
Introducing a new device! We present an analytical method aimed at the qualitative and quantitative analysis of components contained in samples.
- Analytical Equipment and Devices
- Contract Analysis
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Two high-power constant temperature and humidity chambers have been introduced! Ideal for temperature cycle tests and temperature and humidity cycle tests for automotive parts and more.
- Contract measurement
- Contract Analysis
- Contract Inspection
Rubber heat aging test
Our company conducts "rubber thermal aging tests" that help evaluate the properties of materials in actual usage environments. Using a method compliant with JIS K6257 (Method for determining thermal aging characteristics of vulcanized rubber and thermoplastic rubber), rubber test pieces are suspended in a gear oven to create specimens with varying heat treatment times. Additionally, tensile tests are performed on heated natural rubber (NR) to investigate changes in mechanical properties, while hardness is measured simultaneously. Changes in the characteristics of the rubber are also examined, confirming that rubber elasticity is lost and the material becomes harder with heating.
X-ray CT observation allows for the assessment of the winding condition of coil wiring! We will introduce examples of observing IC-type coils, which differ from X-ray transmission observation.
- X-ray inspection equipment
- Other inspection equipment and devices
Analysis case of faulty switch contacts
Since a malfunction was suspected in the switch section of the appliance that would not power on, we will introduce a case study along with the work flow. First, we check for any shape changes such as swelling, cracking, or discoloration through visual observation. In the electrical check, we confirm whether the malfunction can be reproduced and whether it is an open or short circuit. An internal observation using X-rays revealed that the contact terminals inside the switch had melted, scattered, and disappeared, resulting in an open failure. Ultimately, we will submit a report that includes the consideration of the cause. We also accept inquiries for analysis consultations after non-destructive testing, so please feel free to contact us.
[Comparison images available] Internal shape abnormalities can also be observed non-destructively! We compared X-ray CT and cross-sectional SEM.
- X-ray inspection equipment
- Other inspection equipment and devices