List of Polymer Materials products
- classification：Polymer Materials
6121～6165 item / All 15535 items
Printing × Large-Scale Molding High-Precision Positioning Shaping
- plastic
Please feel free to contact us using the form below!
- plastic
Stitch embellishment expression in printing. The unique texture and unevenness of the thread.
- plastic
Significantly reduce color change time with excellent cleaning power! Covers a wide range from general-purpose to engineering plastics!
- plastic
A time when we can create shapes that couldn't be made before! High freedom in design and strong structural design are possible.
- fiber
Primarily focusing on polymer materials, we conduct environmental testing of films, resin materials, products, and more.
- Other polymer materials
This is a testing service for evaluating the basic physical properties of polymers and other materials.
- Other polymer materials
We will conduct mixing tests of polymer materials using various devices.
- Other polymer materials
We will conduct various synthesis experiments focused on polymer polymerization at the lab scale.
- Other polymer materials
We undertake commissioned research and development of new polymers, such as functional polymers and heat-resistant polymers, according to your requests.
- Other polymer materials
We will conduct small-scale trials of various polymers (existing and new) at the lab level (beaker scale).
- Other polymer materials
We will synthesize existing thermosetting and UV-curable resins on a beaker scale.
- Other polymer materials
We will perform polymer modification reactions such as functional group introduction and grafting at the flask level or through reactive extrusion using a twin-screw extruder.
- Other polymer materials
FT-IR (Fourier Transform Infrared Spectroscopy)
- Other polymer materials
We will conduct a small-scale mixing test of 1 to 5 kg. The dead space within the equipment is small, allowing for tests with minimal loss.
- Other polymer materials
Experiments on polymer blending and alloying will be conducted using a twin-screw extruder.
- Other polymer materials
We can produce test specimens for physical property measurements and prototype test specimens of various thermoplastic resins. We also conduct evaluations of moldability.
- Other polymer materials
This is a prototype test for sheet and film molding using a T-die extruder.
- Other polymer materials
We will produce flat plates using a flat pressing mold (formwork).
- Other polymer materials
Melt viscosity (shear rate dependence), melt tension, swell ratio
- Other polymer materials
Utilize existing molding equipment as is Biomass plastic High moldability Injection molding PC-based Samples available from 25kg
- plastic
We will exhibit at the EcoPro 2025 exhibition.
VASU Japan will exhibit at the SDGs Week EXPO 2025 EcoPro, held at Tokyo Big Sight from December 10, 2025. Dates: December 10 (Wed) - 12 (Fri), 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall Admission Fee: Free (registration required) Booth Location: 6-036 On the day, we plan to showcase various molded products and resins made from biomass plastics and biodegradable plastics, which you can actually touch and experience. We hope that by viewing our various molded products, those already engaged in SDGs, those planning initiatives, and those researching SDGs will find inspiration for their businesses, services, and products. Additionally, if you have any questions about bioplastics, please feel free to ask, and we warmly invite you to visit us at booth number "6-036," VASU Japan.
It is an analytical system that utilizes the characteristics of GC, which has excellent separation capability for volatile component mixtures, and MS, which demonstrates power in qualitative and struc...
- Other polymer materials
Quantification of terminal functional groups (such as COOH, OH, NH, epoxy groups, etc.) by titration method.
- Other polymer materials
We have both input compensation type and heat flux type DSC devices, and we conduct various thermal analysis measurements that utilize the characteristics of each device.
- Other polymer materials
Compared to a twin-screw extruder, mixing and kneading can be performed in a region with lower shear rates.
- Other polymer materials
Detect the melting torque of the polymer under dynamic conditions and measure the melting viscosity, temperature, and shear stability.
- Other polymer materials
Under dynamic conditions, the melting torque of the polymer is detected, and the melting viscosity, temperature, and shear stability are measured. Evaluation of small sample quantities is possible.
- Other polymer materials
This is a test to determine the tear strength of plastic films and sheets.
- Other polymer materials
Rockwell hardness is the most commonly used method for measuring the hardness of plastics.
- plastic
Durometer hardness is a measurement method that is used more frequently for rubber and elastomers than for plastics.
- Rubber
Barcol hardness is a measurement method widely used in the quality control of GFRP.
- Composite Materials
Composite of lightweight polymers and high-strength carbon fibers!
- Composite Materials
Various combinations, such as the melt mixing of thermoplastic resins and rubber, have been practically implemented.
- Composite Materials
Resolving the diversified and advanced performance requirements for polymer materials.
- Other polymer materials
We continue to contribute to a recycling society through the recycling of plastics.
- plastic
Utilize existing molding equipment as is Biomass plastic High moldability Injection molding ABS-based Samples available from 25kg
- plastic
We will exhibit at the EcoPro 2025 exhibition.
VASU Japan will exhibit at the SDGs Week EXPO 2025 EcoPro, held at Tokyo Big Sight from December 10, 2025. Dates: December 10 (Wed) - 12 (Fri), 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall Admission Fee: Free (registration required) Booth Location: 6-036 On the day, we plan to showcase various molded products and resins made from biomass plastics and biodegradable plastics, which you can actually touch and experience. We hope that by viewing our various molded products, those already engaged in SDGs, those planning initiatives, and those researching SDGs will find inspiration for their businesses, services, and products. Additionally, if you have any questions about bioplastics, please feel free to ask, and we warmly invite you to visit us at booth number "6-036," VASU Japan.
Utilize existing molding equipment as is Biomass plastic High moldability Injection molding HIPS-based Samples available from 25kg
- plastic
We will exhibit at the EcoPro 2025 exhibition.
VASU Japan will exhibit at the SDGs Week EXPO 2025 EcoPro, held at Tokyo Big Sight from December 10, 2025. Dates: December 10 (Wed) - 12 (Fri), 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall Admission Fee: Free (registration required) Booth Location: 6-036 On the day, we plan to showcase various molded products and resins made from biomass plastics and biodegradable plastics, which you can actually touch and experience. We hope that by viewing our various molded products, those already engaged in SDGs, those planning initiatives, and those researching SDGs will find inspiration for their businesses, services, and products. Additionally, if you have any questions about bioplastics, please feel free to ask, and we warmly invite you to visit us at booth number "6-036," VASU Japan.
We accommodate even small lot mass-produced items. We will bring your ideas to life with rich and creative designs.
- Processing Contract
- plastic
A next-generation partition that can be freely combined in size and shape, achieving both sound absorption and sound insulation.
- fiber