List of Testing Equipment and Devices products
- classification：Testing Equipment and Devices
1756～1770 item / All 6740 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 3kN, suitable for tensile tests of dumbbell-shaped specimens made of rubber and similar materials.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
A tensile testing chuck (gripper) with a maximum capacity of 100N to 5kN, suitable for tensile tests of paper, plastic films, and the like.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
A tensile testing chuck (gripping device) with a maximum capacity of 1kN to 20kN, suitable for tensile tests of materials such as plastic.
- Testing Equipment and Devices
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
Friction coefficient measurement fixture
- Testing Equipment and Devices
- Strength Testing Equipment
Fixture for 90-degree peel strength testing of adhesive tapes.
- Testing Equipment and Devices
- Strength Testing Equipment
It is a system that attaches a load cell to the hammer impact blade (Charpy impact test) and the specimen support platform (tensile impact test) to measure the shock waveform.
- Impact Test
- Strength Testing Equipment
- Testing Equipment and Devices
This is a measuring device used to check the notch height (remaining width after the notch) of test specimens used in Charpy Izod tensile impact tests.
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Impact Test
The barrel can be disassembled into two parts! Compatible with thermosetting resin! The cylinder section and feed section can be cooled!
- Testing Equipment and Devices
It makes the filling of samples into the melt-in deck easier and faster.
- Testing Equipment and Devices
This is a melt indexer capable of multi-weight measurement as specified by ASTM D1238 Method D, in addition to standard single weight measurement.
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Analytical Equipment and Devices
Information on various material testing machines demo units [Toyo Seiki Seisakusho Co., Ltd.]
At Toyo Seiki Seisakusho Co., Ltd., we have demo units of various testing machines available for customers considering a purchase. Please feel free to contact us. <As of June 30, 2021> Mülehn Burst Testing Machine Strograph E3-L, VG20F, AE Elastomer (Universal Testing Machine/Tensile Compression Testing Machine) Shob Type Rebound Elasticity Testing Machine Tackiness Checker Automatic Specific Gravity Meter DSG-1 Mooney Viscometer AM-4 Rotary Rheometer RLR-4 (Curing Testing Machine) Rotary Abrasion Tester Dispersion Machine for Testing Incometer D-2 Bend Graph B-2 Mini Test Press Semi-Auto Melt Indexer 3A Melt Indexer G-01/G-02 (MFR Meter) MIT Flexural Fatigue Testing Machine D-2 Impact Testing Machine IT Friction Measuring Machine AN-S2, HM-3 Loop Steffen Test Gas Permeability Measurement Device Capillograph F-1/F-2 Cone Calorimeter Notching Tool A-4 Blow Point Tester Lab Plastomill Lab Plastomill Micro Hand Treader Thermal Conductivity Measurement Device Digital Garle Flexibility Testing Machine Fragile Permeameter
It is a specialized machine for conducting tensile and compression tests on various materials under temperature conditions. Compared to a standard universal testing machine equipped with a constant te...
- Thermostatic chamber
- Environmental Test Equipment
- Strength Testing Equipment
Introduction to the Universal Material Testing Machine "Strograph"
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.
Film, rubber, and fabric thickness gauge
- Testing Equipment and Devices
- Other measurement, recording and measuring instruments
- Coating thickness gauge
This is a combustion testing machine for conducting vertical combustion tests on electric wires. It consists of a draft chamber, combustion unit, and calibration kit.
- Testing Equipment and Devices
It is a press machine used for compression molding of plastic and rubber samples.
- Testing Equipment and Devices
This is a Beck smoothness testing machine compliant with JIS P 8119.
- Testing Equipment and Devices