List of Testing Equipment and Devices products
- classification：Testing Equipment and Devices
1666～1710 item / All 7006 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
If you do not perform a proof test, it can also be used as a regular winding machine!
- Tester
- Testing Equipment and Devices
Some overseas manufactured parts and products may have quality issues. We provide quality evaluation services for reliability testing and assessment for these.
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Cryogenic ion milling cross-section processing example (rubber products)
We will introduce a case where cross-sections were created and observed by method regarding the adhesive parts of the tires of pull-back cars. When conducting SEM observations of the created cross-sections, fillers present inside the rubber were confirmed. It was found that the dispersion state of the fillers and the condition of the adhesive interface were not clear with fracture by liquid nitrogen or mechanical polishing. In contrast, the cross-sections created by cryo ion milling allow for clear observation of the dispersion state of the fillers contained within the rubber and the condition of the adhesive interface with the plastic substrate.
By conducting two analyses, it is possible to obtain more detailed and accurate results!
- Vibration Testing
Introduction to Micro FT-IR
At Aites Co., Ltd., we have newly introduced "Microscopic FT-IR" this fiscal year. The "Microscopic FT-IR," which combines FT-IR and optical microscopy, allows for the measurement of tiny substances on the order of several tens of micrometers, which are difficult to measure with conventional FT-IR, using an aperture (field of view diaphragm). There are three main measurement methods for Microscopic FT-IR: "transmission method," "reflection method," and "ATR method." While the transmission method is the basic measurement method in Microscopic FT-IR measurements, the reflection method or ATR method may be more suitable depending on the shape of the sample and the feasibility of sampling.
To accurately measure strain in a tensile test, measurement using a strain gauge is necessary!
- Testing Equipment and Devices
- Other Testing Contract
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
In-Situ Continuous Measurement Reliability Evaluation Testing Service
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Observation of substrate deformation using a 3D shape measuring device (VR-6200)
I would like to introduce "Observation of Substrate Deformation Using a 3D Shape Measuring Machine." By applying pressure to the PCB substrate, referencing bending tests of plastics and PCB substrates, the change in state is measured using a 3D shape measuring machine (VR-6200). Since the measurement results can be confirmed with a color palette and line profile, it is possible to visually verify the shape and amount of deformation caused by the applied pressure.
We provide comprehensive support for customers facing reliability issues with overseas manufactured LCD displays, from reliability testing to failure analysis and material analysis.
- Contract Inspection
- Testing Equipment and Devices
- Contract Analysis
In-chamber imaging during constant temperature and humidity testing.
Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, allowing us to capture and monitor the operational status, such as screen displays, during the tests. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subjects with loggers (for voltage, current, resistance, temperature, etc.) is widely practiced. However, monitoring the operational status of equipment during testing can be difficult unless the test equipment is equipped with dedicated external outputs. For samples where monitoring with loggers is challenging, we combine a constant temperature and humidity chamber with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the test equipment.
Testing service for plastic films using a universal testing machine (autograph) in a heated environment!
- Other services
- Strength Testing Equipment
Poisson's ratio measurement
At Aites Co., Ltd., we conduct "Poisson's ratio measurement." Poisson's ratio is the ratio of longitudinal to lateral strain that occurs when a load is applied to an object, and it is necessary for strength calculations of materials. In the downloadable materials, we introduce the results of attaching strain gauges to test specimens, applying tensile loads using a universal testing machine, and examining the longitudinal and lateral strains obtained from the strain gauges. Please feel free to download and take a look.
At the same time, we also support monitoring of power supply, temperature, and electrical items, as well as checks after extraction!
- Environmental Test Equipment
In-chamber imaging during constant temperature and humidity testing.
Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, allowing us to capture and monitor the operational status, such as screen displays, during the tests. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subjects with loggers (for voltage, current, resistance, temperature, etc.) is widely practiced. However, monitoring the operational status of equipment during testing can be difficult unless the test equipment is equipped with dedicated external outputs. For samples where monitoring with loggers is challenging, we combine a constant temperature and humidity chamber with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the test equipment.
Devices that require operation in high-temperature conditions! Introducing latch-up testing at high temperatures.
- Testing Equipment and Devices
- Contract measurement
- Other contract services
It is possible to quantify the color of objects! We will introduce test results that quantify the differences in color.
- Testing Equipment and Devices
- Analytical Equipment and Devices
Using glass knives and diamond knives for sample cutting! Introducing with examples of cross-sectional observation.
- Testing Equipment and Devices
Optical film light transmission characteristics
At Aites Co., Ltd., we conduct "optical film analysis." Optical films used in smartphones and other devices have various functions depending on their structure and materials. We measured the light transmittance of privacy protection films at different angles and combined cross-sectional observation with Raman analysis to investigate the mechanism of function manifestation. By investigating the transmittance characteristics of privacy protection films using angle-variable spectrophotometry, we were able to analyze the mechanism of function manifestation through cross-sectional observation and Raman analysis. At Aites, we provide consistent evaluation and analysis from material properties to the mechanisms of function manifestation.
By using a constant monitor, it is possible to confirm change points! Let us introduce our reliability testing.
- Impact Test
Achieving humidity below 30% with dry air! Introducing the humidity requirements and specifications of major standards in CDM testing.
- Testing Equipment and Devices
It is possible to set bad standards (current values)! Evaluate device degradation and characteristics through high temperature and high voltage power supply.
- Testing Equipment and Devices
Reverse bias test of power devices (up to 2000V)
At Aites Co., Ltd., high-temperature reverse bias testing (HTRB) for evaluating the oxide film and junction of power devices can be applied up to a maximum of 2000V. By monitoring the leakage current during the test, the degradation status of the device can be grasped in real-time. Since the power supply is independent, if one device fails during the test, it will not affect the other devices. Additionally, it is possible to set a failure criterion (current value) and to cut off the power supply to the device deemed faulty at the time of failure judgment. 【Specifications and Service Details】 ■ Test Voltage: Up to a maximum of DC 2000V ■ Applied Current: Up to a maximum of 14mA ■ Number of Test Devices: Up to a maximum of 8 (independent power supply) ■ Compatible Modules: TO-247, TO-220, etc. (other packages require consultation regarding connection methods) ■ Measurement Content: Monitoring of leakage current ■ Temperature Range: Up to a maximum of 200°C (85°C/85% in high temperature and high humidity conditions)
Support from the design and fabrication of test boards! An effective method for comparing the capabilities of multiple products.
- Testing Equipment and Devices
Continuous Power Supply Test for Multilayer Ceramic Capacitors
We would like to introduce our "Continuous Power Supply Test for Multilayer Ceramic Capacitors." Assuming the failure mode is a short circuit, we can conduct a continuous power supply test under high temperature and high humidity conditions while continuously measuring the changes in leakage current with direct current voltage. We believe this is an effective method for comparing the performance of multiple products by manufacturer, lot, etc. Additionally, we will support you from the design and fabrication of the test board.
Not only the joints of electronic components, but also the evaluation of fixed parts such as screws!
- Testing Equipment and Devices
Evaluation of various implementation substrates
At Aites Co., Ltd., we provide a wide range of technical services for evaluation tests of printed circuit boards (mounted boards) equipped with electronic components. We conduct reliability tests, solder joint observations, whisker observations, and cross-sectional observations. We have IPC-A-610 certified IPC specialists on staff who can assist with observations in accordance with international standards, consultations, and various observation-related concerns. Additionally, we offer services such as X-ray observations, appearance inspections, and shape measurements, so please feel free to consult with us when needed.
Reproducing temperature stress during transportation! Evaluating the presence or absence of delamination and cracks through heat treatment.
- Testing Equipment and Devices
Automobiles, paints, construction, plastics, printed materials, textiles, etc.! They are adopted as tests in various fields.
- Testing Equipment and Devices
- Weather resistance test
- Environmental Test Equipment
Accelerated Weathering Test <Xenon Weather Meter>
The "Xenon Weather Meter" is an accelerated weathering test device that uses a xenon arc lamp as its light source. By combining exposure conditions such as irradiation, temperature and humidity, and rainfall, it artificially reproduces outdoor and indoor environments, allowing for the evaluation of weather resistance and light resistance of test specimens in a shorter time than natural exposure tests. The xenon lamp used as the light source has a spectral distribution that closely approximates the ultraviolet and visible parts of sunlight, with precise control over the use of appropriate filters and irradiance. This enables tests with good correlation and reproducibility to outdoor exposure. This testing is conducted as a service by our partner companies. For more detailed information, please refer to related products and catalogs.
Send compressed air at the specified pressure and hold for a set time! Check for any leaks.
- Testing Equipment and Devices
Pressure Repeated Test
The "Pressure Repetition Test" involves supplying compressed air at a specified pressure to products that require airtightness, in order to check for any leaks. It is also possible to conduct a durability test that alternates between pressurized and released states, and this can be performed in a heated state in combination with an environmental testing chamber. Additionally, it is possible to confirm the timing of any leaks from the logged pressure data.
Spectroscopic analysis is suitable for component analysis and qualitative analysis of foreign substances.
- Testing Equipment and Devices
Chemical Analysis Concierge Service
We would like to introduce our "Chemical Analysis - Trust Us Service." When conducting component analysis of foreign substances or stains on products, it can be challenging to determine whether organic analysis or inorganic analysis is more suitable, and which specific analysis within organic or inorganic is the most appropriate. We provide a comprehensive service for customers who are struggling with the selection of analysis methods. Since each analysis device can measure different targets, it is necessary to choose a method that fits the purpose based on the information available.
Applicable to change observation, with support for additional analysis! We evaluate the subject in a time series and non-destructive manner.
- Contract Inspection
- Testing Equipment and Devices
- Other inspection equipment and devices
Observation of substrate deformation using a 3D shape measuring device (VR-6200)
I would like to introduce "Observation of Substrate Deformation Using a 3D Shape Measuring Machine." By applying pressure to the PCB substrate, referencing bending tests of plastics and PCB substrates, the change in state is measured using a 3D shape measuring machine (VR-6200). Since the measurement results can be confirmed with a color palette and line profile, it is possible to visually verify the shape and amount of deformation caused by the applied pressure.
We support evaluation tests for those who have a heavy burden of equipment introduction or cannot conduct tests due to a shortage of personnel!
- Vibration Testing
- Contract Inspection
- Impact Test
A measurement solution for more efficient and rational measurement of voltage, current, and temperature of electric components in vehicles (EV, HEV, PHEV).
- Ammeter
- Voltage Meter
- Testing Equipment and Devices
Ultimate solution for current, voltage, and temperature measurement under low voltage: ultra-wide range and high precision measurement, logging of measurement data to USB memory.
- Electrical Instruments/Electrometers
- Data Logger
- Testing Equipment and Devices
Ultimate solution for current, voltage, and temperature measurement under low voltage: ultra-wide range and high precision measurement.
- Electrical Instruments/Electrometers
- Testing Equipment and Devices
- Other inspection equipment and devices
The ultimate solution for voltage measurement under high voltage! Safely measure signals from high voltage components. Wide range, high precision measurement.
- Other electric meters
- Testing Equipment and Devices
- probe
VCG-1 is a multi-port, multi-bus message routing and data conversion device. It can be used as a gateway.
- Testing Equipment and Devices
- Routers, Switches, and Hubs
Related standards: ISO 812, ISO 974, ASTM D746
- Environmental Test Equipment
- Strength Testing Equipment
Related standards: ISO 812, ISO 974, ASTM D746
- Weather resistance test
- Environmental Test Equipment
- Strength Testing Equipment
Based on the content of ISO 4180, this is a testing method for evaluating the packaging of packaged goods against vibrations, drop impacts, and compression during the distribution process.
- Impact Test
Renewal of the test equipment catalog
We have renewed the catalog regarding our testing equipment. It includes information on equipment and specifications related to packaging tests and product tests. Please download it from the link below. If you wish to conduct tests, please contact us. [Main Equipment Owned] ● Vibration Testers (Large and Small) ● Equivalent Drop Testers ● Free Fall Testers ● Compression Testers ● Inclined Impact Testers ● Decompression Testers ● Large Constant Temperature and Humidity Chamber ● Constant Temperature and Humidity Device ● Constant Temperature Device (Oven) ● Testing Equipment for Integrity Tests ● Mullen Burst Testers ● Acceleration Measurement Devices (Including 1-axis and 3-axis acceleration pickup sensors) ● Forklifts ● Gantry Cranes ● High-Speed Cameras
A compact and lightweight yet high-performance pen-type hardness tester.
- Strength Testing Equipment
The lamp has a long lifespan! A new type of LED black light that changes the concept of fixed-type.
- Flaw detection testing
Anyone can easily measure various materials in hardness units.
- Strength Testing Equipment
The conductivity of non-ferrous metals can be easily measured. The measurement features automatic calibration with temperature compensation.
- Testing Equipment and Devices
Inspection for no liquid leakage due to pressure! One-stop manufacturing of factory automation equipment.
- Testing Equipment and Devices
Conduct evaluations with condition settings that meet various needs! An explanation of combined cycle testing.
- Environmental Test Equipment
- Contract measurement
Introduction of measurement methods compliant with guidelines, such as collection methods using a mini pump.
- Environmental Test Equipment
- Contract measurement