List of Testing Equipment and Devices products

Reduce the workload from handling heavy objects! Here are five case studies that solved customer challenges! We are also accepting free consultations and tests tailored to your work!

• Other conveying machines

Strong cold wind from room temperature to -13°C! Depending on the usage environment, you can choose between the combo type or the separate type!

• Cooling system

A test to measure kinematic viscosity at 30℃! Calculate the kinematic viscosity by multiplying the capillary's specific constant.

• Testing Equipment and Devices

A test to measure the minimum temperature at which the sample flows! Various oils are the subjects.

• Testing Equipment and Devices

Test to measure the vapor pressure of fuel oil! Measuring the pressure of the vapor present in the sample in the air.

• Testing Equipment and Devices

Measuring with a dedicated CFR engine! We will investigate the anti-knock properties.

• Testing Equipment and Devices

Test for measuring the cetane number of diesel fuel! The target oil types are diesel fuel and FAME (fatty acid methyl esters).

• Testing Equipment and Devices

The target oil types are light oil and heavy oil! Measuring the coke-like carbon residue remaining after combustion.

• Testing Equipment and Devices

We will calculate the density, sulfur content, ash content, and moisture content at 15℃ using the measurement results and formulas!

• Testing Equipment and Devices

The target oil types are heavy oil and light oil (including mixed light oil)! We will determine the heat value (J/g) of the sample.

• Testing Equipment and Devices

Calculate using a formula based on the measurement results! It is also called low calorific value.

• Testing Equipment and Devices

Heating and measuring at 775℃! A test to measure the mass of residual carbonaceous material.

• Testing Equipment and Devices

The target oil types are gasoline and kerosene! A test to measure evaporative residues.

• Testing Equipment and Devices

The required amount is 100ml! A test to measure the residual substances of gasoline evaporation.

• Testing Equipment and Devices

Measure the mass of the sludge generated when the sludge in heavy oil and heavy oil are accelerated to degrade!

• Testing Equipment and Devices

Crude oil, raw oil, and additives are the targets! Calculate the water content based on the volume of the water layer after separation.

• Testing Equipment and Devices

A test to measure the concentration of coumarin in the sample! It emits fluorescence when exposed to ultraviolet light.

• Testing Equipment and Devices

Measuring the time until the pressure drop point! A test to measure the oxidation stability of automotive gasoline.

• Testing Equipment and Devices

Mainly measuring the presence of acids and bases in heavy oil! Adding indicators to the separated water layer and observing the color changes.

• Testing Equipment and Devices

The target oil types are engine oil, automotive gear oil, etc.! The kinematic viscosity is measured at the specified temperature below 0°C.

• Testing Equipment and Devices

Quantitative analysis of sulfur content by measuring the intensity of element-specific X-rays generated!

• Testing Equipment and Devices

The target oils are kerosene and light oil! Quantitative analysis of chlorine content in the sample.

• Testing Equipment and Devices

The target oil type is gasoline! Measuring the pH in fuel ethanol.

• Testing Equipment and Devices

Quantification of methanol and other organic impurities in fuel ethanol!

• Testing Equipment and Devices

Measuring the density of the sample (15°C)! Test to determine the alcohol content in fuel ethanol.

• Testing Equipment and Devices

Filtration of FAME! A test to measure the amount of solid impurities contained in the sample.

• Testing Equipment and Devices

Quantification of fatty acid methyl esters (FAME) and triglycerides in diesel fuel!

• Testing Equipment and Devices

Measure the heat value (J/g) excluding the latent heat and sensible heat of the water vapor in the combustion gas!

• Testing Equipment and Devices

The target oil type is gasoline! A test to measure the moisture content in ethanol used for automotive fuel blending.

• Testing Equipment and Devices

A test to quantify the carbon, hydrogen, and nitrogen components in the sample! We will determine the elemental concentrations.

• Testing Equipment and Devices

Quantification of chlorine content in the sample! The target oil types are diesel (including mixed diesel) and kerosene (including jet fuel).

• Testing Equipment and Devices

After burning and ashing the sample, perform alkaline fusion treatment to obtain a solution! Measure the light intensity for quantitative analysis.

• Testing Equipment and Devices

The required amount is 10ml! Determine the ratio of the saturated fraction, aromatic fraction, resin fraction, and asphaltene fraction.

• Testing Equipment and Devices

Classified into saturated fractions, olefin fractions, monocyclic aromatics, bicyclic aromatics, and polycyclic aromatics!

• Testing Equipment and Devices

Estimate the mass-to-charge ratio of organic compounds! The measurable molecular weight is approximately 200 to 1600.

• Testing Equipment and Devices

The target oil types include gasoline and kerosene (including jet fuel)! Consultation is required for the details of your request.

• Testing Equipment and Devices

Determine the ratio of each n-paraffin to others in fuel oil! This includes kerosene and diesel.

• Testing Equipment and Devices

This is a driver's aid controller. A commercially available LCD monitor can be used for the display that shows the driving mode.

• Testing Equipment and Devices

Complies with the concrete compressive strength testing method of JIS A 1108. Operability, reliability, and information processing capabilities are improved through computer control.

• Testing Equipment and Devices

Metal test specimens are the subject. Compliant with 'JIS B 7722', 'JIS Z 2242', or 'ASTM E23', 'ASTM A370'.

• Testing Equipment and Devices

Complies with JIS R 5201 physical testing methods for cement. Ideal for compression and bending tests of small specimens (such as sidewalk blocks, bricks, stones, wood, and metals).

• Testing Equipment and Devices

It is a small compression testing machine that is optimal for relatively large test specimens for compression and bending tests due to the wide testing space, and it can also perform memory and statis...

• Testing Equipment and Devices

[JIS Z 2241] Complies with the tensile testing method for metallic materials. A universal testing machine with automatic control that accommodates various tests!

• Testing Equipment and Devices

Compliant with 【JIS Z 2247】【JIS Z 2249】【JIS Z 2256】. Various tests can also be conducted by exchanging test fixtures.

• Testing Equipment and Devices

For determining the brittleness of metallic materials! Measure the absorbed energy required for fracture to calculate the Charpy impact value.

• Impact Test

Various "space-saving testing machines" that are compact, lightweight, and can be tested in any location.

• Testing Equipment and Devices

We offer screw-type universal testing machines for low to high loads. *For high loads, please contact us directly.

• Testing Equipment and Devices