List of Other machine elements products

For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.

• Work gloves

The seal is attached to one side in advance to prevent shifting before passing it through the slitter. Various materials such as CR and EPDM can be accommodated, and please consult us regarding width ...

• Other machine elements

CR rubber has average physical properties such as weather resistance. A hardness of 40 typically does not have sheets or blocks available, and the material is made and molded from a compound.

• Other machine elements

Punching processing is highly productive and leads to cost savings. We handle various types of gaskets for machines, bottles, and more, so please feel free to consult us about processing.

• Other machine elements

Neolon is an extruded product made from neoprene sponge, and the corner cord is used in construction materials and other applications. It has good compatibility with tape and can be attached to any de...

• Other machine elements

The corner cords of Neoron are handled as standard products. Corner cords can also be used to connect U-shaped or ends together for ring adhesion.

• Other machine elements

The request was for the production of bolt caps made of weather-resistant soft PVC for construction purposes. The bolt caps were designed and manufactured using dip molding.

• Other machine elements

Toray has a POM super low distortion grade. There are concerns about warping in processes that involve thin sections or large cutouts.

• Other machine elements

PVC has good adhesive properties and is used for shapes that are difficult to process as a single unit. The sheets are processed using NC machining, and the adhesive work is reliably done by skilled c...

• Other machine elements

This is L-shaped angle processing with the MC900NC. The MC900NC is a nylon material suitable for cutting processing from sheet materials and round bars.

• Other machine elements

Polyacetal can be processed from standard thickness sheet materials. In addition to sheets, there are also round rod materials, and machining with NC lathes is actively performed.

• Other machine elements

Neolon is entirely covered with a coating, has cushioning properties, and can be processed endlessly with adhesive. Non-standard dimensions are useful for endless processing.

• Other machine elements

A wide range of high cost-performance near-infrared spectroscopic modules and compact spectrometers available!

• Spectroscopic Analysis Equipment
• Other Connectors
• Other machine elements

PVC is a material suitable for adhesion and welding. In transparent resins, PVC and acrylic are commonly used for adhesive processing, while PC and PET are not suitable.

• Other machine elements

C-4310 is a white CR rubber sponge. Its hardness is 23±5°, which is almost the same as general-purpose materials, and it is processed into items such as gaskets.

• Other machine elements

We are using many die-cutting molds for EPT and EPDM processing. Die-cutting offers high efficiency in production, making it ideal for large quantities of inexpensive products like gaskets.

• Other machine elements

The U-shaped packing is often used by being sandwiched in, and a hardness of 40 has been adopted. Low hardness materials can also be handled for molding materials.

• Other machine elements

By increasing the marinating time, the thickness will increase. The inside of the cap becomes the mold contact surface, which improves precision, but controlling the outer dimensions is difficult.

• Other machine elements

Our company stocks NR in the factory and uses it for die-cutting. We also accept tape processing along with die-cutting using natural rubber.

• Other machine elements

Tough sheets can be processed using both progressive and conventional presses. Since it is difficult to cut thin gaskets in one go, they are processed with a two-step cut using a progressive press.

• Other machine elements

Urethane is poured as a liquid material, solidified, and then shaped through cutting processes. Molding and cutting processes are also possible for materials softer than hardness 90.

• Other machine elements

MC Nylon supports various machining methods. Bushings can be produced in quantities of hundreds even with machining.

• Other machine elements

Due to the tendency for deformation to increase, there are constraints on the shape, but you can leave the processing of thick materials to us.

• Other machine elements

It will be processed by cutting from NR65° block material. NR is often used for machining because it is inexpensive among rubbers.

• Other machine elements

We can manufacture from one piece for custom processing. Please feel free to contact us for individual processing such as milling, turning, and machining.

• Other machine elements

Rubber becomes more difficult to process as its thickness increases, such as with a thickness of 4mm. Even at 4mm thickness, the resistance of the rubber is significant, leading to edge deformation in...

• Other machine elements

Urethane 70° has a moderate hardness and is often used for machining. If only a small quantity is needed, it can be produced from just one piece for machining.

• Other machine elements

It has high mechanical strength and is often used for spacers and bushes. Polyacetal also has high dimensional stability and is a material well-suited for machining.

• Other machine elements

It is possible to cast liquid materials and solidify them, and then machine them. The advantage is that it has a hardness similar to that of plastics, making it easy to process by cutting.

• Other machine elements

Due to the transparent resin, machining may cause cloudiness. The machined surface from the pipe material can also regain transparency through chemical treatment.

• Other machine elements

Neoprene rubber is a popular material, so we can also accept one-off items. Machining is often used for prototypes, so please feel free to consult with us.

• Other machine elements

Polycarbonate is a material with excellent impact resistance. We can accept prototype machining of parts that require impact resistance starting from one piece.

• Other machine elements

Standard color urethane 70° is available without the need for a mold. It is a material that is often inquired about as it can be machined without a mold.

• Other machine elements

POM is usually white, but there are black materials available. Polyacetal is a resin that excels in mechanical strength and wear resistance.

• Other machine elements

We offer injection molding services as our main molding service, and we can also start the construction of molds!

• Other machine elements

In areas where high precision is not required, using medium precision and simple guide rails can be expected to improve construction efficiency!

• Other machine elements
• Beverage Production Equipment
• Food Packaging Machinery

Mini guide rail MRS type

• Other machine elements

Mini Guide Carriage MR-30CS

• Other machine elements

Clamp MR-20CLP type

• Other machine elements

Clamp MR-30CLP type

• Other machine elements

Clamp MR-15CLP type

• Other machine elements

Special stripping according to the materials and types of plating for the products being processed.

• Other machine elements

Top-class share both domestically and internationally! A gas seal with proven results and trust.

• Other machine elements

Temperature conditions, pressure conditions, and standard materials are custom designed! Products for separation seals.

• Other machine elements

Non-contact for turbo compressors! Installation of nitrogen supply module is also possible.

• Other machine elements

No support equipment needed! The standard design is compatible with most single-stage turbines.

• Other machine elements