List of Plastic Mould products
- classification：Plastic Mould
46～90 item / All 1173 items
For those who have isolators. Achieving high chemical resistance and workability. Low cost and short delivery times are also possible for glove box and isolator gloves.
- Work gloves
Notice of participation in 'INTERPHEX Week Tokyo' from May 20 (Wednesday) to May 22 (Friday), 2026.
Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.
Leave all your needs for plastic molding, injection molding, resin molding, mold manufacturing, and assembly to us!
- Injection Molding Machine
- Plastic Mould
If you have any questions about plastic, please feel free to ask.
- others
- Plastic Mould
We solve your plastic problems! We can handle everything from prototypes to mass production.
- plastic
- Plastic Mould
- Biodegradable plastics
Since we can handle everything from design to mold making, mass production, and assembly in a one-stop service, we can reduce communication and travel time between outsourcing, making it possible to s...
- Plastic Mould
We specialize in the design and manufacturing of various types of collet chucks! Leave the tooling to us.
- Plastic Mould
- Mold
- others
The lathes are unified under Okuma Corporation. Inspections and inventory are conducted in a temperature-controlled environment 24 hours a day. We meet various needs from prototypes to mass-produced i...
- Prototype Services
- Plastic bearings
- Plastic Mould
We can also accommodate FDA requirements. We process polyacetal materials characterized by mechanical strength and fatigue resistance using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
We can also comply with the Food Sanitation Act. We process polyacetal material, characterized by fatigue resistance and low water absorption, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Thorough management of room temperature and material temperature. We meet various needs from prototypes to mass-produced products with precision machining of resin.
- Prototype Services
- Plastic bearings
- Plastic Mould
Compatible with the Food Sanitation Act. We process nylon material, characterized by its high mechanical strength and abrasion resistance, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compatible with the Food Sanitation Act. We process nylon material, characterized by high mechanical strength and abrasion resistance, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compliant with the Food Sanitation Act. We process nylon material, characterized by weather resistance, with well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
It has flexibility and can comply with food sanitation laws. We process nylon material characterized by abrasion resistance and anti-stick-slip measures with well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compatible with the Food Sanitation Act. We process nylon material, characterized by improved mechanical strength and heat resistance, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compatible with the Food Sanitation Act. We process nylon material with conductive properties using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compatible with the Food Sanitation Act. We process nylon material with antistatic properties using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Can also comply with FDA. We process polyacetal material, characterized by its insulation properties and mechanical strength, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Can accommodate the Food Sanitation Act. We process polyether ether ketone material, characterized by chemical resistance and mechanical strength, with well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
We can comply with the Food Sanitation Act. We process polyether ether ketone material, characterized by its lubricity and wear resistance, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
We can comply with the Food Sanitation Act. We process polyether ether ketone material, characterized by rigidity, creep resistance, and dimensional stability, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
Compliant with the Food Sanitation Act. We process polyether ether ketone material, characterized by conductivity, rigidity, and creep resistance, using well-equipped facilities.
- Prototype Services
- Plastic Mould
- plastic
![[Case Study] Plastic Mold Manufactu...](https://image.mono.ipros.com/public/product/image/70a/2000927009/IPROS13262931108194308390.png?w=280&h=280){kind=small}
Successful automation and unmanned operation from the processing of partial electrodes to measurement.
- Plastic Mould
![[CIMATRON Case Study] Plastic Mold ...](https://image.mono.ipros.com/public/product/image/cfb/2000926961/IPROS72018841904377384013.png?w=280&h=280){kind=small}
Even with complex shapes, design errors are significantly reduced!
- Plastic Mould
![[Case Study] Plastic Mold Manufactu...](https://image.mono.ipros.com/public/product/image/3c2/2000926990/IPROS54933896432514783728.png?w=280&h=280){kind=small}
Achieved a 30% efficiency improvement in mold design and electrode design!
- Plastic Mould
High-precision products can be manufactured using stainless steel (SUS) and super engineering plastics (PEEK).
- Other medical supplies and cosmetics manufacturing machines
- Plastic Mould
Appearance in "Alvarez's Sky"
The program "Alvarez's Sky" on BS Teleto is featuring Sayama Mold Manufacturing Co., Ltd., which supports small and medium-sized enterprises. The theme is "Business Succession." Our President, Soichiro Oba, will be interviewed, and our company will be introduced, so please be sure to watch. Program name: "Alvarez's Sky" Broadcasting station: BS Teleto (BS Channel 7)
A low-invasive resin injection needle made of PEEK, a super engineering plastic.
- Plastic Mould
- Other medical supplies and cosmetics manufacturing machines
Appearance in "Alvarez's Sky"
The program "Alvarez's Sky" on BS Teleto is featuring Sayama Mold Manufacturing Co., Ltd., which supports small and medium-sized enterprises. The theme is "Business Succession." Our President, Soichiro Oba, will be interviewed, and our company will be introduced, so please be sure to watch. Program name: "Alvarez's Sky" Broadcasting station: BS Teleto (BS Channel 7)
From management based on intuition to data-driven mold management. The key to producing quality products lies in "mold management"!
- Injection Molding Machine
- Plastic Mould
Even beyond 800℃, the release performance remains unwavering. A high-temperature dedicated lubricant that prevents seizure.
- Lubricants
- Plastic Mould
- Mold
【Q&A】What happens to grease at high temperatures? Does it stick? Deteriorate? Seize up?
Q. What happens to grease in high-temperature environments? Does it stick, deteriorate, or seize? A. In high-temperature conditions, these phenomena often occur "gradually." In a high-temperature environment, the oil components in the grease become more prone to separation and movement, making it difficult for the lubricating components to remain in the moving parts. At this stage, stiffness in movement and insufficient lubrication begin to appear. If the condition where the lubricating film cannot be maintained continues, direct contact between metals increases, leading to friction and wear. As a result, issues such as seizing and sticking occur. In other words, the progression often follows this flow: deterioration → insufficient lubrication → seizing and sticking. Even if a problem seems to occur suddenly, there is always a change in lubrication condition in the preceding stages. In high-temperature environments, not only the heat resistance temperature values but also the ability to maintain lubrication under high temperatures become crucial points for grease selection. The changes in grease that occur at high temperatures and the mechanism of trouble occurrence are organized technically in the attached document.
We can handle design, manufacturing, prototyping, and small lot molding! We can produce prototypes in a short delivery time.
- Plastic Mould
Leave the plastic molds related to headlamps for automobiles and motorcycles to us!
- Plastic Mould
- Resin mold
Just right is the best. The optimal solution for the cost of mold grease.
- Plastic Mould
- Other molds
- Lubricants
Stable lubrication compatible with 280℃! Ideal for slide pins and ejectors.
- Plastic Mould
- Mold
- Lubricants
Differentiation through adhesion - High-performance grease specifically for O-rings and packings.
- Plastic Mould
- Press Dies
- Lubricants
Food container-specific grease that balances safety and performance.
- Plastic Mould
- Mold
- Lubricants
Ranless changes the new standard of injection molding | Responding to diverse needs with a rich product lineup.
- Injection Molding Machine
- Plastic Mould
- Resin mold
Mold for stacked secondary batteries | Injection molding test piece mold
- Press Dies
- Plastic Mould
- Resin mold
Protecting molds, supporting the workplace. A selection of high-performance grease lineup.
- Press Dies
- Plastic Mould
- Lubricants
[Free Sample Start] We have started offering free samples of various greases!
We have launched a campaign offering a free trial of M&M's high-temperature grease for those struggling with mold burning and release troubles. With a heat resistance of 800°C, it significantly improves lubrication and release properties when directly applied to molds. Please take this opportunity to experience the effectiveness of our high-performance grease. It is ideal for addressing issues with mold equipment and sliding parts used in high-temperature environments.
High heat resistance, high pressure resistance, and excellent chemical resistance universal fluorine grease.
- Lubricants
- Plastic Mould
- Mold
【Q&A】What happens to grease at high temperatures? Does it stick? Deteriorate? Seize up?
Q. What happens to grease in high-temperature environments? Does it stick, deteriorate, or seize? A. In high-temperature conditions, these phenomena often occur "gradually." In a high-temperature environment, the oil components in the grease become more prone to separation and movement, making it difficult for the lubricating components to remain in the moving parts. At this stage, stiffness in movement and insufficient lubrication begin to appear. If the condition where the lubricating film cannot be maintained continues, direct contact between metals increases, leading to friction and wear. As a result, issues such as seizing and sticking occur. In other words, the progression often follows this flow: deterioration → insufficient lubrication → seizing and sticking. Even if a problem seems to occur suddenly, there is always a change in lubrication condition in the preceding stages. In high-temperature environments, not only the heat resistance temperature values but also the ability to maintain lubrication under high temperatures become crucial points for grease selection. The changes in grease that occur at high temperatures and the mechanism of trouble occurrence are organized technically in the attached document.
We will make suggestions based on the type of resin, monthly usage amount, MFR, packaging (paper bags, bulk bags), and applications (injection molding, extrusion molding, blow molding, etc.).
- plastic
- Plastic Mould
- Plastic utensils and containers
Proposal and sales of recycled plastic materials.
We will make proposals based on information such as the type of resin, monthly usage amount, MFR, packaging (paper bags, bulk bags), and applications (injection molding, extrusion molding, blow molding, etc.). The Ministry of the Environment's "Plastic Resource Circulation Strategy" sets a milestone to double the reuse of recycled materials by 2030. https://www.env.go.jp/content/900513721.pdf The Ministry of Economy, Trade and Industry is advocating for a transition to a circular economy in the medium to long term (Circular Economy Vision 2020). https://www.meti.go.jp/press/2020/05/20200522004/20200522004-1.pdf Our company actively promotes the use of recycled materials from the perspective of environmental conservation and CO2 reduction. After about 20 years of trial and error, we now use approximately 90% recycled materials in our main product, bubble cushioning material (Puchipuchi). We are seeking partner companies that can use recycled materials (recycled resin) and pellets, along with the expansion of environmentally friendly products.
This is a compatible part for DME Jiffy-Tite 200 series used for mold cooling temperature control!
- Plastic Mould
The standard "DME200 series" for mold cooling fittings now has a cost-effective and high-performance MMG compatible model!
In 2025, M&M Corporation began selling the "MMG200 Series," a compatible quick coupling for molds in the DME Zifitite 200 series. This new series is characterized by its compatibility with the DME standard 200 series (Zifitite), which is widely used both domestically and internationally, allowing for a smooth replacement of conventional products. Furthermore, the cost performance is noteworthy. While maintaining high-quality finishes and reliability, the price has been significantly reduced compared to genuine products. For manufacturing sites where cost reduction is essential, it truly represents a "handy" option. The MMG coupling optimizes the balance of durability, sealing, and operability by adopting a brass body with a stainless steel locking mechanism. It supports various screw sizes, including PT1/8, 1/4, and 3/8, making it widely compatible with both mold water lines and oil temperature control lines. 【Implementation is progressing in the following environments】 ✅ Water cooling circuits for press molds and injection molding machines ✅ Compatibility applications with overseas DME standard molds ✅ Sites struggling with inventory and delivery times of existing DME couplings ✅ Sites looking to reduce costs and unify parts
![[Sample Presentation] Resin Cleanin...](https://image.mono.ipros.com/public/product/image/f6f/208521005/IPROS72902247846761007684.jpeg?w=280&h=280){kind=small}
Reduce cleaning time by one-third! Carbide removal, color change, and resin change are possible without damaging the molding machine! *Sample and case materials available.
- Cleaning agents
- Plastic Mould
- Injection Molding Machine
