List of controller products
- classification：controller
1381～1440 item / All 1625 items
Reduce the workload from handling heavy objects! Here are five case studies that solved customer challenges! We are also accepting free consultations and tests tailored to your work!
- Other conveying machines
Presentation of explanatory materials on JIS and ISO standards. We propose suitable safety barriers from a rich product series! Free rental of demo kits.
- Other safety and hygiene products
This is a compact display controller that can be used in combination with Bronkhorst digital mass flow meters and mass flow controllers.
- controller
Mass flow meter controller with display
Broncost offers an optional display that can show instantaneous flow rate, total flow rate, and flow rate settings. The MASS-STREAM is built into the device, while other models can be mounted on the top or side of the device via a "T-part" connector.
If you use about 100 items of factory original remote controls, there will be no mold cost.
- controller
Air jet recognition controller with new features added based on feedback from on-site users.
- controller
IEI Full-size PICMG 1.3 CPU Board, compatible with Core i7/i5/i3 LGA1150 socket, Intel H81.
- Industrial PCs
- Embedded Board Computers
- controller
MicroATX motherboard compatible with 4th generation Core i, equipped with IEI H81 chipset.
- Industrial PCs
- Embedded Board Computers
- controller
Rated voltage 12V-24V, rated current 5A. Compact size, suitable for a wide range of applications! Can also meet the needs for experiments, research purposes, and replacement of existing products!
- Other conveying machines
- Other industrial robots
- controller
A stepping motor controller that can drive all 16 channels of motors simultaneously!
- controller
- Stepping motor
AAEON Vehicle-Compatible Fanless NVR with 4 PoE Ports, equipped with Intel 7th Generation Core i3-7100U.
- Industrial PCs
- Embedded Board Computers
- controller
AAEON PoE×4 port equipped fanless PC for in-vehicle NVR with Intel(R) Core i3-7100U【VPC-5600S】
The fanless PC compatible with vehicle installation has the following features: ● Fanless structure ● 288-pin dual-channel DDR4 2133MHz SODIMM with 2 slots (supports up to 32GB) ● A total of 6 Gigabit LAN ports, with 4 ports supporting PoE (the photo shows a custom configuration with a maximum of 8+2 ports, which incurs a MOQ) ● 3 mini PCIe sockets (2 full-size + 1 half-size), 1 mSATA slot ● Built-in CAN 2.0B ● E-mark certification obtained ● MOQ of 50 allows for PoE×8 or changes to CPU options of i5 or i7
Rich lineup! Temperature controller for ceramic electric tubular furnaces.
- Electric furnace
- controller
Real-time monitoring is possible anywhere! A reliable controller compatible with a redundant system.
- controller
AAEON PICO-ITX standard Rockchip ARM Cortex A17 RK3288 fanless embedded board with HDMI port
- Industrial PCs
- Embedded Board Computers
- controller
AAEON PICO-ITX Standard Rockchip ARM Cortex A17 RK3288 Fanless Embedded Board HDMI Port [RICO-3288]
The PICO-ITX standard Rockchip-equipped CPU board has the following features: ● Equipped with Rockchip RK3288 ARM Cortex(TM)-A17 Quad-core 1.6 GHz ● Onboard DDR3L 2GB memory ● Onboard 16GB eMMC ● Micro SD slot (up to 64GB) ● Gigabit Ethernet x1 ● 18/24-bit dual-channel LVDS, eDP, HDMI compatible ● RS-232 x1, RS-232/422/485 x1 compatible ● USB 2.0 x3, USB OTG x1, mini PCIe x1 (for 3G/4G module)
AAEON 3.5-inch standard industrial CPU board equipped with Intel 6th generation Core i7/i5.
- Industrial PCs
- Embedded Board Computers
- controller
AAEON industrial fanless embedded PC RS-232×4 + RS232/422/485×2 equipped with Intel N4200/N3350
- Industrial PCs
- Embedded Board Computers
- controller
AAEON Industrial Fanless Embedded PC Japanese Catalog 2019 Vol 1
This is AAEON's comprehensive Japanese catalog for industrial embedded PCs. It features a wide range of products, from palm-sized compact types to those that can accommodate expansion slots, and PCs equipped with CPUs ranging from Atom class to Core i7 class.
AAEON 7-inch ultra-thin industrial fanless touch panel PC, multi-touch compatible, equipped with Intel J1900/N2807.
- Industrial PCs
- Embedded Board Computers
- controller
AAEON Industrial Touch Panel PC Japanese Catalog 2018 Vol 1
This is the comprehensive catalog in Japanese for AAEON's industrial touch panel PCs. It features a wide range of products from 7 inches to 21.5 inches with front panels compliant with IP64 and IP65 standards.
AAEON 10.1-inch fanless touch panel PC, multi-touch compatible for signage, Intel J1900/N2807.
- Industrial PCs
- Embedded Board Computers
- controller
AAEON Industrial Touch Panel PC Japanese Catalog 2018 Vol 1
This is the comprehensive catalog in Japanese for AAEON's industrial touch panel PCs. It features a wide range of products from 7 inches to 21.5 inches with front panels compliant with IP64 and IP65 standards.
AAEON 3.5-inch industrial fanless CPU board equipped with Intel Pentium N4200 / Celeron N3350.
- Industrial PCs
- Embedded Board Computers
- controller
Supermicro Mini ITX standard industrial motherboard equipped with Xeon D-1541.
- Industrial PCs
- Embedded Board Computers
- controller
Jetway Mini ITX standard industrial motherboard equipped with Intel Braswell N3160 processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway 3.5-inch standard industrial CPU board equipped with Intel Bay Trail D/M/I.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway Industrial Fanless Compact PC equipped with Intel(R) Braswell N3160 1.6GHz
- Industrial PCs
- Embedded Board Computers
- controller
Jetway Mini ITX standard industrial motherboard equipped with Intel Baytrail D/M/I processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway Mini ITX standard industrial motherboard equipped with Intel Bay Trail D/M/I processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway Mini ITX standard industrial motherboard equipped with Intel Bay Trail M/D/I processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway Mini ITX standard industrial motherboard equipped with Intel Celeron J1900 quad-core processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway 3.5-inch standard industrial CPU board equipped with Bay Trail D J1900 2.0GHz quad-core processor.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway 3.5-inch standard industrial CPU board equipped with Intel(R) Bay Trail.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway PICO-ITX standard industrial CPU board equipped with Intel N2930/N2807/E3827.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway PICO-ITX standard industrial CPU board equipped with Intel(R) Braswell N3160 2.24GHz.
- Embedded Board Computers
- Industrial PCs
- controller
Jetway Industrial Fanless Compact PC with Skylake-U (i5-6200U / i5-6300U) installed
- Industrial PCs
- Embedded Board Computers
- controller
AAEON 3.5-inch standard industrial embedded board equipped with Celeron N2930/N2807
- Industrial PCs
- Embedded Board Computers
- controller
Introduction of the synchronous rectification NVDC battery boost/buck charging controller 'bq25703A'.
- Other power sources
- Dedicated IC
- controller
The optimal controller for glue application control! Compatible with both cold glue guns and hot melt guns!
- glue
- controller
- Other process controls
Change material, reduce mass by approximately 45%.
- Gearbox
- controller
Control the weight-based supply system! Set any supply amount, and the controller will automatically adjust.
- Powder Supply Device
- Other powder equipment
- controller
DC20-40V input power supply for 5-phase motor driver
- controller
DC24V to 36V input power supply 5-phase micro-stepping driver
- controller
The product with a case material changed to aluminum is currently on sale, reducing the weight by approximately 50%.
- Gearbox
- controller
Adjust the rotation angle of the control motor in proportion to the control input signal!
- Servo
- controller
- others
Automatically adjust the brightness of the lighting fixture to two levels with the ON/OFF motion sensor!
- LED lighting
- controller
This dimmer allows independent control of three channels with one unit, catering to various needs.
- LED lighting
- controller
Aldic series! 4-wire type RGB control controller using PWM method.
- LED lighting
- controller
Slim and compact design! Capable of switching between static, blinking, display patterns, and scrolling display.
- controller
This is a system that displays the screen shown on the PC on a full-color LED module.
- controller
Significant energy savings possible! Easily reduce and control peak air conditioning power.
- controller
- Other air conditioning equipment
Low cost and space-saving! The ideal controller for powder handling equipment weighing systems.
- controller
A precision electric screwdriver controller that improves work efficiency with seven bank functions!
- driver
- controller
- Other work tools
Equipped with an FPGA, it can be customized to your preference. It is a 2-axis and 4-axis motion control board for computer control.
- controller
We have achieved further enhancement in functionality, miniaturization, and cost reduction as a successor model to our products.
- controller
Energy-saving air conditioning safely and reliably at a low cost! Intermittent operation control controller for air conditioners.
- controller
Heavy machinery theft, gate opening and closing! We propose systems such as alarms and controls tailored to the site.
- Remote Control
- controller
Equipped with MCX514. A motion control board with enhanced interpolation functions, capable of CW/CCW arcs, maximum 4-axis linear interpolation, and helical interpolation.
- controller
Equipped with two MCX514 units. A motion control board with enhanced interpolation functions, capable of CW/CCW arcs, maximum 8-axis linear interpolation, and helical interpolation.
- controller
PCI bus compatible circuit board for PC/AT compatible machines.
- Other FA equipment
- Servo
- controller
Compliance with overseas safety standards (UL certification) / CE compliance
- controller
- Stepping motor
- Embedded Board Computers
We will be exhibiting at the 29th Mechanical Components Technology Exhibition.
Dear Sir/Madam, I hope this message finds you in good health and spirits. We would like to inform you that our company will be exhibiting at the 29th Mechanical Components Technology Exhibition, which will be held at Tokyo Big Sight from June 19 (Wednesday) to June 23 (Friday) of Reiwa 6. We will also be showcasing our developed product, the "MC-S0528-HS." You will be able to experience its powerful torque performance with a DC24V power supply and a driving current of 2.8A per phase. We sincerely invite you to visit our booth. Our staff is looking forward to welcoming you.
Adopts a low heat generation circuit to suppress driver heating! Compact driver with a maximum driving current of 2.8A per phase.
- controller
- Stepping motor
- Embedded Board Computers
We will be exhibiting at the 29th Mechanical Components Technology Exhibition.
Dear Sir/Madam, I hope this message finds you in good health and spirits. We would like to inform you that our company will be exhibiting at the 29th Mechanical Components Technology Exhibition, which will be held at Tokyo Big Sight from June 19 (Wednesday) to June 23 (Friday) of Reiwa 6. We will also be showcasing our developed product, the "MC-S0528-HS." You will be able to experience its powerful torque performance with a DC24V power supply and a driving current of 2.8A per phase. We sincerely invite you to visit our booth. Our staff is looking forward to welcoming you.
DC 5V single power supply, constant voltage drive! Up to 250 divisions (125,000 pulses per revolution) of microstepping is possible.
- Embedded Board Computers
- controller
- Stepping motor
We will be exhibiting at the 29th Mechanical Components Technology Exhibition.
Dear Sir/Madam, I hope this message finds you in good health and spirits. We would like to inform you that our company will be exhibiting at the 29th Mechanical Components Technology Exhibition, which will be held at Tokyo Big Sight from June 19 (Wednesday) to June 23 (Friday) of Reiwa 6. We will also be showcasing our developed product, the "MC-S0528-HS." You will be able to experience its powerful torque performance with a DC24V power supply and a driving current of 2.8A per phase. We sincerely invite you to visit our booth. Our staff is looking forward to welcoming you.
It is a 5-phase stepping motor driver with an input of AC100V to 115V and a maximum drive current of 2.8A per phase.
- Stepping motor
- Embedded Board Computers
- controller
We will be exhibiting at the 29th Mechanical Components Technology Exhibition.
Dear Sir/Madam, I hope this message finds you in good health and spirits. We would like to inform you that our company will be exhibiting at the 29th Mechanical Components Technology Exhibition, which will be held at Tokyo Big Sight from June 19 (Wednesday) to June 23 (Friday) of Reiwa 6. We will also be showcasing our developed product, the "MC-S0528-HS." You will be able to experience its powerful torque performance with a DC24V power supply and a driving current of 2.8A per phase. We sincerely invite you to visit our booth. Our staff is looking forward to welcoming you.
Reduce mass by approximately 50%! Streamlining embedded work for conveying equipment and machine tools.
- Gearbox
- controller
A high-pressure gas controller that allows for free supply and exhaust of pressure at 30 MPa.
- controller