We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Abrasives.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Abrasives Product List and Ranking from 91 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

Abrasives Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. フジミインコーポレーテッド Gifu//Electronic Components and Semiconductors
  2. Kovax Corporation Tokyo//Other manufacturing
  3. ユー・エス・テクノロジー,ファーイースト　 Gunma//Other manufacturing
  4. 4 ハルツォク・ジャパン Tokyo//Testing, Analysis and Measurement
  5. 5 アイエムティー Wakayama//Testing, Analysis and Measurement
Go to Company Ranking

Abrasives Product ranking

Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.

  1. High Purity Colloidal Silica Slurry Polishing Material 'COMPOL' フジミインコーポレーテッド
  2. Automotive exterior compound polishing material "MIRAFLEX Series" フジミインコーポレーテッド
  3. Colloidal silica polishing material for silicon wafers 'GLANZOX' フジミインコーポレーテッド
  4. 4 Alumina polishing material for metals 'FM' フジミインコーポレーテッド
  5. 5 Polishing material for plastic lenses "POLIPLA" フジミインコーポレーテッド

Abrasives Product List

241～270 item / All 283 items

Displayed results
MAGIC II・MAGIC III

MAGIC II・MAGIC III

MIL85891A TYPE VIII certified product! (MAGIC II) for carbon fiber and thin aluminum skin paint removal.

"MAGIC II" is a newly developed product designed to increase processing speed compared to POLY V. It is suitable for paint stripping without damaging the surface of aircraft aluminum alloys and composite materials. It is specifically designed for paint stripping from composite materials, particularly carbon fiber resin and thin aluminum skin layers. [Features] - Designed for paint stripping from carbon fiber resin and thin aluminum skin layers - Low discharge pressure ranging from 10 psi to 30 psi - Increased discharge volume for blasting - Capable of paint stripping at a speed 3 to 4 times faster than conventional products - Approved as MIL-P-85891A, TYPE VIII, Nanocomposite Media for U.S. military aircraft "MAGIC III" is a plastic media developed to remove strong coatings applied to surfaces exposed to high heat. [Features] - Efficiently removes coatings due to a special blend - Suitable for landing gear (aircraft landing gear) and engine parts *For more details, please refer to the PDF materials or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Acrylic resin polishing material for air blasting "POLY V"

Acrylic resin polishing material for air blasting "POLY V"

MIL-P85891A TYPE V certified product! Waste materials are regenerated into monomers through pyrolysis! Acrylic resin abrasive material.

"POLY V" is a suitable product for paint stripping that does not damage the surfaces of aluminum alloys such as duralumin used in aircraft or composite materials. It is non-toxic and certified as MIL-P85891A, TYPE V. This product uses thermoplastic acrylic resin, so used waste materials can be regenerated into monomers through pyrolysis. Please feel free to contact us if you have any inquiries. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cleaning of Castings [Blasting Processing Example]

Cleaning of Castings [Blasting Processing Example]

It is possible to efficiently clean dirt, residues, and rust on the surface of castings and molds in a short amount of time!

For hard metals like cast iron, using Type 3 (melamine resin) with high cutting power allows for efficient cleaning. Using glass beads gradually cuts into the mold surface, causing edges and fine details to disappear with each cleaning, but Type 3 (melamine resin), being a resin, can clean hard metals with minimal damage. This method is particularly effective for cleaning residual vulcanized material on mold surfaces during rubber vulcanization molding. Additionally, there is almost no damage to the blast machine body, nozzles, hoses, and other fixtures, which significantly reduces maintenance costs. By switching from harmful and toxic organic solvents to abrasives for cleaning, it also enhances worker safety and improves the workplace environment.

  • Other abrasives
  • Technical and Reference Books
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cleaning of seal materials and sealing materials [Blasting processing example]

Cleaning of seal materials and sealing materials [Blasting processing example]

It is possible to efficiently clean sealants, adhesives, and residues attached to the surface of castings in a short amount of time!

For hard metals like cast iron, using Type 3 (melamine resin) with high cutting power allows for efficient cleaning. Using glass beads gradually cuts into the surface of the mold, causing edges and fine details to disappear with each cleaning, but Type 3 (melamine resin) can clean hard metals with minimal damage since it is a resin. Additionally, there is almost no damage to the blast machine body, nozzles, hoses, and other tools, which helps reduce maintenance costs. By switching from harmful and toxic organic solvents to abrasives for cleaning, it also contributes to improved safety for workers and better workplace conditions.

  • Other abrasives
  • Technical and Reference Books
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wet blast abrasive "Aqua Media α"

Wet blast abrasive "Aqua Media α"

Abrasive material used for wet blasting (wet type)! Ideal for deburring electronic components and removing dirt and resin burrs from easily scratched soft metals!

The α series is a new abrasive developed specifically for wet blasting (liquid honing), where glass beads are blended in a well-balanced manner with unsaturated polyester resin. It combines the two properties of glass beads and unsaturated polyester resin, excelling in fine processing while minimizing damage to the workpiece while maintaining cutting power. It is suitable as an alternative to other thermosetting resin abrasives and plant-based abrasives. In particular, plant-based abrasives (such as walnut, apricot, peach, etc.) can have variability in hardness and durability, requiring adjustments to blasting conditions depending on the batch. However, our resin-based abrasives maintain consistent quality, have low friability, and are durable, allowing for repeated use according to each application. All α series products are blended in-house, and we pay close attention to managing the particle size distribution after blending. Only abrasives that meet our strict standards are sold to our customers. *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PRORREC glass water spot polishing agent 'PR-004'

PRORREC glass water spot polishing agent 'PR-004'

A polishing agent that effectively removes scale stains stuck to glass.

◎Just a few wipes! ◎Completely removes stubborn alkaline scale (water stains)! ◎Extremely high hydrophilicity, perfect for pre-treatment with glass water repellents. ◎Cerium oxide concentrated formula + composite polishing agent (gel form) *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid abrasive

Liquid abrasive

Ideal for a wide range of polishing! Introducing "Liquid Polishing Agent" from Nichisho Buff Co., Ltd.

This product is a liquid abrasive that contains dissolved abrasives. It is used by applying it to a buff or sponge. It is suitable for a wide range of polishing due to its ease of achieving uniform polishing. Please feel free to contact us when you need assistance. 【Types Available】 ■ Liquid Tripoli ■ Liquid Lime ■ Paste Blue ■ Liquid Blue Stick *For more details, please refer to the related links or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sankei White (WA) is perfect for metal polishing and is resistant to chemicals and heat.

Sankei White (WA) is perfect for metal polishing and is resistant to chemicals and heat.

High-quality abrasives crushed domestically. Sizes can be customized according to customer needs, ranging from a maximum of 80μm to a minimum of 1.2μ!

Using white alumina grinding material as raw material, our advanced fine powder technology produces the highest quality fine particles through grinding and granulation, enabling a sharp particle size distribution due to stable particle shape. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ Cutting power is inferior to GC, but it is less likely to cause scratches and is easy to handle ■ Resistant to chemicals and heat ■ Can be mixed in due to its white color ■ High cutting power due to its hardness ■ High quality and reliable as it is domestically ground with ISO certification *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perfect for polishing compounds, heat and chemical resistant Sankei Alanjil (AZ).

Perfect for polishing compounds, heat and chemical resistant Sankei Alanjil (AZ).

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ according to customer needs!

This is a fine polishing material developed as a wrapping material that requires high precision. It has a sharp particle size distribution, stable granularity, and a blocky shape. Soft polishing results in a uniform polishing surface. Examples of use include wrapping of semiconductor crystals (such as silicon), lenses, prisms, quartz, optical glass, and metals. 【Features】 ■ Resistant to scratching even when ground ■ Effective for soft materials and items that should not be scratched ■ Resistant to chemicals and heat *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sankei White (WA) is perfect for precision finishing and grinding wheel materials.

Sankei White (WA) is perfect for precision finishing and grinding wheel materials.

High-quality abrasives crushed domestically. Sizes can be customized according to customer needs, ranging from a maximum of 80μm to a minimum of 1.2μm!

Using white alumina grinding material as raw material, our advanced fine powder technology produces the highest quality fine particles that are crushed and classified, allowing for a sharp particle size distribution due to their stable particle shape. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and the lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ Cutting power is inferior to GC, but it is less likely to cause scratches and is easy to handle ■ Resistant to chemicals and heat ■ White in color, allowing for easy mixing ■ High cutting power due to its hardness ■ High quality and reliable as it is domestically crushed and ISO certified *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NSW Corporation

NSW Corporation

Chemical polishing gloss agent for stainless steel, chemical polishing gloss agent for titanium, oxide film remover.

IT solution services For more details, please also visit our company website. https://dx.nsw.co.jp/

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【システム非公開】ステンレス流し台みがき

【システム非公開】ステンレス流し台みがき

イギリス生まれの新研磨剤を使用した流し台みがきです。

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「ステンレス流し台みがき」を取り扱っております。 水だけで流し台のサビやキズ、こびりついて取れない汚れを　みがき落とします。 どんな形状にもフィット!ソフトクッションを使用。

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【システム非公開】サビクリア　S　細目＃240　60ｘ30ｘ10

【システム非公開】サビクリア　S　細目＃240　60ｘ30ｘ10

素材を傷めにくい柔らかい砥石です。

当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「サビクリア　S　細目＃240　60ｘ30ｘ10 MS103」を取り扱っております。 ナイフや包丁などの金属製品の錆落とし。 お鍋ややかんなどの焼けや焦げ落とし。 流し台などのステンレス製品、水栓金具の汚れ落としなど。 -------------- 【関連ワード】 サビ落とし 包丁メンテナンス --------------

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
White alumina abrasive material "WARF"

White alumina abrasive material "WARF"

The aluminum oxide content is over 99%! Easy to store due to the zipper.

"WARF" is a white alumina polishing material that is translucent with a whitish tint. It comes in a 4kg bag, making it suitable for small-scale use. It can be used for sandblasting and general polishing. We offer 11 different grain sizes ranging from F24 to F220. The packaging is available in small bags of 4kg and large boxes containing 20kg (5 bags of 4kg each). 【Features】 ■ Translucent polishing material with a whitish tint ■ Contains over 99% aluminum oxide ■ Easy to store due to the included zipper ■ Suitable for small-scale use with 4kg bags *For more details, please download the PDF or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Alumina polishing material "AARF"

Alumina polishing material "AARF"

The aluminum oxide content is a representative value of 95.80%! It is easy to store because it comes with a zip lock.

"AARF" is a reddish-brown alumina abrasive. It comes in a 4kg bag, making it suitable for small-scale use. It can be used for sandblasting and general polishing. We offer 11 types of grain sizes ranging from F24 to F220. The packaging forms include small bags of 4kg each and large boxes containing 20kg (5 bags of 4kg each). 【Features】 ■ Reddish-brown abrasive ■ The aluminum oxide content is a representative value of 95.80% ■ Easy to store due to the included chuck ■ Suitable for small-scale use as it comes in a 4kg bag *For more details, please download the PDF or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Briemur, a fixed abrasive suitable for batch processing of ductile materials such as metals.

Briemur, a fixed abrasive suitable for batch processing of ductile materials such as metals.

No slurry needed! Achieves stable processing and uniform finishing for both brittle and ductile materials.

Briemeur maintains a consistent performance of the abrasive grains and stabilizes the processing condition due to its fixed abrasive grain structure. It preserves the polishing effect even with ductile materials, achieving uniform processing. This contributes to the stabilization of surface roughness and the reduction of processing inconsistencies. Furthermore, the stable polishing rate allows for predictable processing times, leading to improved accuracy in process management. Additionally, the clear wear ratio between the pellets and the workpiece makes it easy to understand the wear condition, facilitating cost visibility. As a result, it simultaneously achieves "uniform finishing," "reproducible processing," and "manageable costs." Before implementation, we conduct evaluation tests with the workpieces entrusted to us. We propose optimal specifications based on the material and processing conditions, ensuring a worry-free introduction. Briemeur selects the most suitable specifications from dozens of types of pellets and provides them with custom designs. We also flexibly address processing challenges that cannot be handled by off-the-shelf products on a case-by-case basis. 【Features of Briemeur】 ■ Reduced processing time and high-efficiency processing ■ Stable rate = predictable timing ■ Clear wear ratio = understandable costs

  • Wafer processing/polishing equipment
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Taisei Kousakusho Co., Ltd. "Aero Wrap" Mold Wrapping Technology Introduction

Taisei Kousakusho Co., Ltd. "Aero Wrap" Mold Wrapping Technology Introduction

A groundbreaking mold wrapping technology like no other: "Aero Wrap"!

"Aero Wrap" is a revolutionary wrapping technology that is unlike any other. It beautifully and instantly wraps molds with complex shapes that are difficult to wrap using conventional methods, without compromising dimensions or shapes. By containing water, it has elasticity and adhesiveness, and the abrasive material (Multi-Cone) can be polished by sliding it rapidly over the surface of the workpiece, generating frictional force. [Features] ■ Revolutionary technology ■ Beautifully and instantly wraps molds that are difficult to wrap with conventional methods ■ High-speed sliding on the polishing surface ■ Patent No. 3376334 *For more details, please refer to the catalog or feel free to contact us.

  • Mold
  • Other contract manufacturing
  • Other contract services
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Supports automatic polishing of tools and molds! Presenting Lappin's processing case materials.

Supports automatic polishing of tools and molds! Presenting Lappin's processing case materials.

Using the abrasive "Lappin," we achieve everything from rough to mirror polishing through blasting! Automation and large-scale processes for polishing molds and tools are now possible.

"Lappin" is a media coated with fine abrasive particles on an elastic base material, which can be used in blasting machines. It polishes while sliding, so it does not damage the substrate and allows for rough to mirror polishing without breaking the edges with fine particles. ■Benefits of Lappin - Anyone can easily perform polishing tasks, even without skilled operators. - It enables polishing of 3D-shaped workpieces, which is difficult with hand polishing. - Automation is easy. - It extends the lifespan of tools and molds. - It improves the working environment (reducing dirt and noise). - The cost of abrasive materials is low. *You can read processing case materials from the PDF download.

  • Lappin製品画像２.png
  • Other abrasives
  • Other surface treatment equipment
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【For Precision Machining】 Indian Niobium Pentoxide (Nb₂O₅)

【For Precision Machining】 Indian Niobium Pentoxide (Nb₂O₅)

High-purity niobium pentoxide contributing to the improvement of precision machining quality.

In the precision machining industry, the finishing accuracy and durability of products are crucial. The performance of abrasives significantly affects the quality of the processed items, and especially in precision machining of optical and electronic components, the uniformity of the abrasives and the smoothness of the polished surface are required. The use of inappropriate abrasives can lead to a decline in product performance and the occurrence of defective products. Our Indian niobium pentoxide (Nb₂O₅) has a high purity of 99.99% and provides high quality and stability as an abrasive in precision machining. 【Application Scenarios】 - Polishing of optical lenses - Polishing of electronic components - Polishing of precision molds 【Benefits of Implementation】 - Improved smoothness of polished surfaces - Enhanced product quality - Improved yield

  • TaO SG Packing Drum + Liner (002).jpg
  • Rare metals
  • alloy
  • Ceramics
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Deburring of electronic components [Blast processing case]

Deburring of electronic components [Blast processing case]

Deburring of sealing materials in the electronic component manufacturing process.

We specialize in deburring electronic components such as capacitors, diodes, LEDs, transistors, inductors, and phototransistors, which require high-quality processing. We mainly use carefully selected domestic materials, and the quality of the abrasives is consistently uniform, allowing for stable processing without work damage. If abrasives get trapped in the terminal area, you can continue to use them by changing the material or particle size. Please give U.S.T.F.E.'s POLYMEDIA a try. *Types of burrs that can be removed (thin burrs, dam burrs, side burrs, gate burrs, resin flash, etc.) We offer options for dry blasting and wet blasting (liquid honing). Samples of abrasives are available.

  • Capacitor
  • Other abrasives
  • Technical and Reference Books
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perfect for grinding difficult-to-cut materials and resistant to chemicals/heat, Sankei Green (GC).

Perfect for grinding difficult-to-cut materials and resistant to chemicals/heat, Sankei Green (GC).

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ according to customer needs!

Using green silicon carbide as raw material, our advanced micron technology produces the highest quality micron particles that maintain hardness second only to diamond, while exhibiting excellent grinding and polishing power without being affected by chemicals. Examples of use include precision finishing grinding wheels, as well as wrapping for ceramics, cemented carbide, new materials, quartz, and glass. 【Features】 ■ Caution is needed for scratches, but it cuts well ■ Resistant to chemicals and heat ■ Strong cutting and polishing power ■ High quality assured by domestic grinding with ISO certification *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perfect for abrasive cloth paper and resistant to chemicals/heat, Sankei White (WA).

Perfect for abrasive cloth paper and resistant to chemicals/heat, Sankei White (WA).

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ according to customer needs!

Using white alumina grinding materials as raw materials, our advanced fine powder technology produces the highest quality fine particles through grinding and granulation, allowing for a sharp particle size distribution due to stable particle shape. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and the lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ Cutting power is inferior to GC, but it is less likely to cause scratches and is easy to handle ■ Resistant to chemicals and heat ■ White in color, allowing for easy mixing ■ High cutting power due to its hardness ■ High quality assured as it is domestically ground with ISO certification *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perfect for glass and resistant to chemicals/heat, Sankei White (WA)

Perfect for glass and resistant to chemicals/heat, Sankei White (WA)

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ based on customer needs!

Using white alumina grinding material as raw material, our advanced fine powder technology produces the highest quality fine particles through crushing and granulation, enabling a sharp particle size distribution due to stable particle shape. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and the lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ Cutting power is inferior to GC, but it is less likely to cause scratches and is easy to handle ■ Resistant to chemicals and heat ■ White in color, allowing for easy mixing ■ High cutting power due to its hardness ■ High quality and reliable as it is domestically crushed and ISO certified *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sankei White (WA) is perfect for wrapping materials such as semiconductor crystals.

Sankei White (WA) is perfect for wrapping materials such as semiconductor crystals.

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ based on customer needs!

Using white alumina grinding material as raw material, our advanced fine powder technology produces the highest quality fine particles that are crushed and classified, enabling a sharp particle size distribution due to their stable particle shape. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and the lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ While the cutting power is inferior to GC, it is less likely to cause scratches and is easy to handle. ■ Resistant to chemicals and heat. ■ Its white color allows it to be mixed and used. ■ Due to its hardness, it also has high cutting power. ■ It is domestically crushed with ISO certification, ensuring high quality and reliability. *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perfect for electrical insulation materials, Sankei White (WA) is also resistant to chemicals and heat.

Perfect for electrical insulation materials, Sankei White (WA) is also resistant to chemicals and heat.

High-quality abrasives crushed domestically. Sizes can be customized from a maximum of 80μm to a minimum of 1.2μ based on customer needs!

Using white alumina grinding material as a raw material, our advanced fine powder technology produces the highest quality fine particles that have a stable particle shape, allowing for a sharp particle size distribution. Examples of use include precision finishing grinding wheels, paints, resins, filler materials, and the lapping of metals, glass, quartz, and semiconductor crystals. 【Features】 ■ Cutting power is inferior to GC, but it is less likely to cause scratches and is easy to handle ■ Resistant to chemicals and heat ■ Its white color allows it to be mixed in for use ■ High cutting power due to its hardness ■ High quality assured as it is domestically produced with ISO certification *For more details, please refer to the PDF document or feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NSW Corporation for Medical Use

NSW Corporation for Medical Use

Chemical polishing gloss agent for stainless steel, chemical polishing gloss agent for titanium, oxide film remover.

In the field of telemedicine, the quality and reliability of medical devices are crucial. In particular, the surface treatment of medical devices is essential to ensure cleanliness, durability, and safety for patients. Metal components such as stainless steel and titanium must meet these requirements through chemical polishing agents and oxide film removers. The products of NSW Corporation address these challenges. 【Application Scenarios】 - Manufacturing of medical devices - Surface treatment of surgical instruments - Components for telemedicine devices 【Effects of Implementation】 - Improvement in the quality of medical devices - Enhanced surface durability - Assurance of safety for patients

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Saint-Gobain Corporation for Semiconductors

Saint-Gobain Corporation for Semiconductors

Supporting the polishing process of semiconductor manufacturing with glass products and high-performance materials.

In the semiconductor industry, high precision and durability are required in the polishing process to manufacture high-quality products. The selection of polishing materials is a crucial factor that influences the finish of the product. Saint-Gobain's products provide optimal solutions to meet the stringent demands of customers in the polishing process. [Application Scenarios] - Polishing of semiconductor wafers - Surface treatment after polishing - Polishing of precision parts [Benefits of Implementation] - Achieving high-quality polishing - Improving product yield - Cost reduction through high durability

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
World Market for Abrasives: English Market Research Report

World Market for Abrasives: English Market Research Report

"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly from the related links.

The global market size for abrasives was valued at 36.42 billion USD in 2022, and it is projected to grow from 38.17 billion USD in 2023 to 55.54 billion USD by 2031, with a CAGR of 4.80% during the forecast period from 2024 to 2031. The global abrasives market is experiencing significant expansion, largely driven by the rapidly growing metalworking sector. This growth is attributed to the increasing demand for pre-designed structures and components, along with technological advancements in manufacturing. Diverse industries such as healthcare, agriculture, automotive, and aerospace are also contributing to this growth.

  • Other services
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Abrasive material "Super Asilex Brown K-180"

Abrasive material "Super Asilex Brown K-180"

[Free samples available] A polishing film made using a flexible substrate and a special manufacturing process! It is highly durable.

The "Super Asilex Brown K-180" is a polishing film made using a special manufacturing process. It uses a flexible substrate that conforms well to complex shapes and allows for effective polishing. It finishes with a very uniform grit equivalent to P180. Additionally, it has less clogging compared to regular sandpaper and is highly durable. 【Features】 ■ Uses a flexible substrate ■ Conforms well to complex shapes for effective polishing ■ Finishes with a very uniform grit equivalent to P180 ■ Less clogging compared to regular sandpaper ■ Highly durable ★ If you would like a free sample, please feel free to contact us.

  • Other abrasives
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
99.9% pure α-alumina polishing material 'FS'

99.9% pure α-alumina polishing material 'FS'

Ultra-fine particles with a purity of 99.9% and above! For the final finishing of contact lenses and precision machine parts.

"FS" is a polishing material made from high-purity α-A1₂O₃ powder that can be used for the final finishing of contact lenses and precision machine parts. In addition to Fujimi's technology, it is a product that has achieved controlled particle size, fast stock removing, low cost, and ease of use with the utmost care. Furthermore, it has an ultra-fine particle purity of over 99.9, making it less likely to undergo chemical reactions. [Applications] ■ Ceramic materials ■ Polishing of gemstones and precious stones ■ Final finishing for contact lenses ■ Finishing for precision parts such as watch gears ■ Raw materials for ceramic bites and transparent alumina *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Abrasives

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Abrasives

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.