We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Composites.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Composites Product List and Ranking from 101 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.

Composites Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.

  1. JAPAN FINE CERAMICS CO., LTD. （JFC） Tokyo Sales Office Tokyo//Ceramics
  2. アドバンスコンポジット 本社　富士事業所　 Shizuoka//Machine elements and parts
  3. 大塚化学 Tokyo//Chemical
  4. 4 三菱ケミカル コンポジットパーツ本部　Asia事業部 Tokyo//Resin/Plastic
  5. 5 Hoganas Japan K.K. Tokyo//Ferrous/Non-ferrous metals
Go to Company Ranking

Composites Product ranking

Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.

  1. High-performance thermoplastic composite "Pochicon" 大塚化学
  2. 3D printer resin composite material "POTICON FILAMENT" グーテンベルク
  3. Metal Matrix Composite (MMC) "AC-Albolon" アドバンスコンポジット 本社　富士事業所　
  4. 4 Solid Lubricating Composite Material "NF Metal"
  5. 4 Soft Magnetic Composite (SMC) 'Somaloy(R)' Overview Hoganas Japan K.K.

Composites Product List

121～150 item / All 248 items

Displayed results
Carbon fiber reinforced composite "C/C composite"

Carbon fiber reinforced composite "C/C composite"

A material that can withstand temperatures above 2000℃!

C/C composite is a material reinforced with carbon fibers and graphite. It is lightweight, high-strength, and highly elastic, and has excellent performance, such as withstanding high temperatures above 2000°C in inert atmospheres. It has various advantages compared to conventional heat-resistant materials like heat-resistant steel and graphite. It is primarily used in high-temperature environments.

  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proprietary Technology] MMC Die Casting (Metal Matrix Composite Materials)

[Proprietary Technology] MMC Die Casting (Metal Matrix Composite Materials)

Lightweight, high rigidity, low thermal expansion, high thermal conductivity! MMC metal-ceramic composite materials are now available at low prices and can be mass-produced.

We have significantly reduced the cost of high-performance composite materials MMC through die casting manufacturing. ● Features of die-cast MMC 1. Lightweight: Comparable to aluminum 2. High rigidity: Greater than cast iron 3. Low thermal expansion: Two-thirds that of aluminum 4. High thermal conductivity: Greater than aluminum

  • Other metal materials
  • Ceramics
  • alloy
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal ceramic composite material "MMC" (SiC/Si infiltration method)

Metal ceramic composite material "MMC" (SiC/Si infiltration method)

Overwhelming low thermal expansion and high thermal conductivity make it suitable for use in heat dissipation components!

It is a composite material in which metal silicon is impregnated into SiC ceramic porous bodies. By changing the ratio of SiC, it is possible to achieve a thermal conductivity that matches the needs. It has low thermal expansion and is attracting attention as an alternative material to various materials.

  • Ceramics
  • Fine Ceramics
  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proprietary Technology] Die-Cast Heat Sink (High-Performance Composite Material MMC)

[Proprietary Technology] Die-Cast Heat Sink (High-Performance Composite Material MMC)

Low thermal expansion, high thermal conductivity! We offer lightweight, high-rigidity materials with excellent heat dissipation properties = metal ceramic composite materials (MMC) using die-casting methods.

We have significantly reduced the cost of high-performance MMC using the die-casting method. ● Features of die-cast MMC 1. Low thermal expansion: 2/3 that of aluminum 2. High thermal conductivity: greater than aluminum 3. Lightweight and high rigidity: as light as aluminum with a Young's modulus greater than that of cast iron

  • Other metal materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Composite Material MMC for Solar Cell Manufacturing Equipment

Composite Material MMC for Solar Cell Manufacturing Equipment

High thermal conductivity surpassing ceramics! Achieving low thermal expansion comparable to silicon!

By combining SiC ceramics with metallic silicon, we have achieved high thermal conductivity that surpasses ceramics and low thermal expansion comparable to silicon. Thermal conductivity that exceeds SiC and AlN! By changing the composite ratio, various properties can be realized. Surface treatment (plating) is possible, and it can also be used for electrostatic chucks. It can be made larger than ceramics. We also offer a combination of SiC and aluminum. For more details, please refer to the PDF catalog.

  • Ceramics
  • Fine Ceramics
  • Other metal materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example of Use] Movable Stage Metal Ceramic Composite Material

[Example of Use] Movable Stage Metal Ceramic Composite Material

The performance of the device is improved by lightweight, high-rigidity metal-ceramic composite materials.

"Metal ceramic composite material with rigidity exceeding that of cast iron due to the lightness of aluminum" Aluminum is light but bends. Iron does not bend but is heavy. This is a new material that solves the designer's dilemma. In addition to excellent specific rigidity, its outstanding thermal properties of low thermal expansion and high thermal conductivity make it suitable for movable stages. The adoption of MMC is progressing in high-speed moving parts of mountings and machine tools. It meets diverse needs through gravity casting, low-pressure casting, and die casting methods.

  • Mounter
  • Other semiconductor manufacturing equipment
  • Other industrial robots
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example of Use] Sputtering Target Composite Material SiC/Si

[Example of Use] Sputtering Target Composite Material SiC/Si

You are using SiC/Si composite materials as the target material.

It is a composite material containing SiC ceramic particles in Si alloy. It has higher bending rigidity than crystalline Si, and there is no occurrence of cracking or chipping during use, allowing for stable film formation until the end. With a film formation rate (deposition speed) 1.3 times that of crystalline Si targets, efficient film formation is possible.

  • Sputtering Equipment
  • Other metal materials
  • Fine Ceramics
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improvement Case Using Wafer Chuck with SiC/Si Composite Material

Improvement Case Using Wafer Chuck with SiC/Si Composite Material

We will introduce examples of problem-solving using JFC's unique metal ceramic composite materials (MMC) based on our achievements. Please refer to the catalog (PDF).

The composite material MMC combines the lightweight properties of aluminum with the rigidity of steel, featuring high thermal conductivity and low thermal expansion. The composite material of SiC and Si is poreless and has a particle prevention effect, making it suitable for wafer chucks. 【Main Features】 ■ Lightweight ■ High Rigidity ■ High Thermal Conductivity ■ Low Thermal Expansion ■ Wear Resistance 【Adoption Effects】 JFC's unique composite material MMC (Metal Matrix Composites) brings numerous benefits, such as improved equipment performance and energy efficiency due to its lightweight and high rigidity, solutions to thermal issues from high thermal conductivity and low thermal expansion, and reduced assembly man-hours through the integration of parts using casting methods. It is being adopted in various fields. *For details, please refer to the materials available for download via the PDF button. We also welcome inquiries through the contact button.

  • Other metal materials
  • Ceramics
  • Fine Ceramics
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Useful Information] Alumina Alternative Composite Material SA701

[Useful Information] Alumina Alternative Composite Material SA701

To customers struggling with large alumina parts - that problem can be solved with ceramic composite materials.

With the expansion of the semiconductor manufacturing equipment market, procurement issues related to ceramics have arisen. In particular, large alumina components have limited suppliers, and extended lead times are impacting equipment development schedules. The ceramic-metal composite material SA701 has slightly lower Young's modulus and bending strength compared to alumina, but it has high fracture toughness and is less prone to cracking, making it easy to handle. Its density is about 3/4 that of alumina, and it can be machined for direct threading, eliminating the need for metal bushings and enabling weight reduction. We encourage you to consider the adoption of metal-ceramic composite materials, which excel in producing larger components compared to alumina. *For more details, please refer to the materials available for download via the PDF button. We also welcome any questions or inquiries through the contact button.*

  • Other metal materials
  • Ceramics
  • Fine Ceramics
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Contribution to semiconductor integration and 3D development! Effects of adopting composite materials MMC.

Contribution to semiconductor integration and 3D development! Effects of adopting composite materials MMC.

Composite materials MMC enhance the performance of semiconductor manufacturing equipment - MMC components with high thermal conductivity, low thermal expansion, lightweight, high rigidity, and high precision improve equipment performance.

■MMC Adoption Effects Changed the cooling jacket from aluminum to composite material MMC (SA701) - Reduced thermal expansion difference with alumina ESC → Thermal expansion rate equivalent to alumina 7x10^-6/K - Improved thermal conductivity → 15% increase over aluminum (thermal conductivity: 160W/m·K) *Internal flow paths will be formed in the cooling jacket using MMC bonding technology. ■Development Information Currently developing SiC/Si-Al composite materials. Minimizing the thermal expansion difference with the next-generation "Aluminum Nitride ESC." ■High-Precision Processing New equipment has been added to high-precision processing technology, enabling the provision of larger MMC products with even higher precision. ○ Introduction of a laser interferometer (manufactured by Zygo) boasting one of the largest measurement ranges in Japan ○ Introduction of an ultra-high precision surface grinding machine (manufactured by Nagase Integrex) ◆ Exhibiting as the JGC Group at "SEMICON Japan 2025" ◆ Dates: December 17 (Wed) - 19 (Fri), 2025, 10:00-17:00 Venue: Tokyo Big Sight (West Hall 1) Booth: JGC Holdings (Booth No. W1165) We will showcase technology development for composite materials, ceramics, and the semiconductor, environmental, and energy sectors. We look forward to your visit.

  • Composite Materials
  • Fine Ceramics
  • Other machine elements
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Organic composite agent "Pacific Beam Mold Powder-based raw material"

Organic composite agent "Pacific Beam Mold Powder-based raw material"

Exhibits excellent suppression and prevention effects against mold, with long-lasting effectiveness!

"Pacific Beam Mold Powder-based Raw Material" is an organic composite material developed in Japan that has antibacterial and antifungal properties. It has a very stable chemical structure, and by directly adding it to equipment (mixing it in), it minimizes the loss of its active ingredients, resulting in long-lasting effectiveness. Additionally, it is eco-friendly and safe, causing no harm to the ecosystem, while demonstrating excellent effectiveness against mold. [Features] - Environmentally conscious - Achieves low MIC (Minimum Inhibitory Concentration) values - Difficult to develop antibacterial resistance - Non-leaching - Long-lasting effects *For more details, please refer to the catalog or feel free to contact us.

  • Chemicals and anti-mold materials
  • Other insect and mold prevention measures
  • Disinfecting and antibacterial products
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Taika Arock (for HFO)

Taika Arock (for HFO)

Composite fire-resistant material with on-site foamed polyurethane (HFO)

Composite non-combustible material with on-site foamed polyurethane foam (HFO). ● Even in areas with interior restrictions, applying Tyka-Alock to the surface of rigid polyurethane foam (with "HFO" blowing agent formulation) makes it a composite non-combustible material. (Please check the back of the catalog for the applicable rigid polyurethane foam.) ● As it is a wet material, it easily forms a seamless non-combustible layer on complex shapes and curves of the substrate. ● The finish can be selected from two types: free spray and trowel finish.

  • others
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nisshin FULFIL Co., Ltd. List of Various Biomass Plastics

Nisshin FULFIL Co., Ltd. List of Various Biomass Plastics

Biomass composites that connect to the future

The biomass composite material "NEOPLA Series," which is a blend of plant-derived biomass such as wood powder, starch, and rice bran with PP and PE, is not just a composite material of biomass and resin, but a functional environmental material that imparts the functions of biomass to plastic. By utilizing the properties and characteristics of biomass, it provides functions such as antibacterial, deodorizing, static prevention, and slip resistance. Additionally, there are also blended products made from bamboo, bamboo charcoal, rice, and rice husks. For more details, please contact us or download the catalog.

  • Organic Natural Materials
  • Composite Materials
  • plastic
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chemix Corporation Business Introduction

Chemix Corporation Business Introduction

Leave it to us for anything related to electronic materials and fuel cells!

Chemix Co., Ltd. has been developing composite materials using epoxy resins, polyimide resins, and ceramics since its establishment in 1985. The results of this development have been applied to fuel cells and high thermal conductivity insulating materials, and are utilized in various industrial fields, including the space industry and semiconductor industry. We are committed to supplying products that leverage our knowledge and technology to benefit our customers and contribute to society. 【Business Areas】 ■ Electronic Materials Division ■ Fuel Cell Division *For more details, please contact us or download the catalog.

  • Other electronic parts
  • Fuel Cells
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Composite Material "Fabric Sheet (Type G)"

Composite Material "Fabric Sheet (Type G)"

A fabric sheet with excellent non-stick and sliding properties!

This product is a composite material that coats industrial fabrics such as glass cloth and aramid cloth with fluororesin. By undergoing secondary processing, it can be used in a wide range of fields including chemistry, machinery, electricity, telecommunications, and construction. Additionally, it possesses excellent non-stick and sliding properties, as well as outstanding electrical characteristics, particularly in terms of electrical conductivity and dielectric breakdown strength. 【Features】 ■ Active in a wide range of fields ■ Excellent non-stick properties ■ Superior dielectric breakdown strength *For more details, please contact us or download the catalog.

  • Other Machine Parts
  • Conveyor parts
  • Other factory equipment and parts
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Information Magazine 201904-03 Measured Values of Coefficient of Linear Expansion

Technical Information Magazine 201904-03 Measured Values of Coefficient of Linear Expansion

The technical information magazine The TRC News provides the latest information on analytical techniques that are useful for research and development, solving production troubles, and quality control.

**Abstract** With the improvement of simulation technology, techniques for estimating physical properties have developed. On the other hand, there are often discrepancies between the estimated physical properties and the actual behavior of materials. One possible cause of this is that the parameters used in the simulation differ from those of the materials being used. This paper examines composite materials using cellulose nanofibers (CNF), a new material that has garnered attention in recent years, by comparing the orientation of CNF and the linear thermal expansion coefficient of the composite material between measured values and estimated values from simulations. Furthermore, the results of the evaluation of the impact of the parameters used in the simulation are presented. **Table of Contents** 1. Introduction 2. Samples 3. Measurement and Simulation Analysis Methods 4. Comparison of CNF Orientation 5. Comparison of Linear Thermal Expansion Coefficient (CTE) 6. Conclusion

  • Contract Analysis
  • Contract measurement
  • Technical and Reference Books
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Basic Knowledge Material】What are carbon fiber composites necessary for pipe repair?

【Basic Knowledge Material】What are carbon fiber composites necessary for pipe repair?

Widely used as materials for sports applications, as well as for aircraft and automobile bodies!

This document introduces carbon fiber composites necessary for pipe repairs. It provides a detailed explanation of the usage of carbon fiber in Firmonite, including four-directional fibers and thickness, using diagrams. This is a useful reference, so please take a moment to read it. 【Contents】 ■ About carbon fiber ■ Carbon fiber used in Firmonite ■ Four-directional fibers ■ Thickness of carbon fiber *For more details, please download the PDF or feel free to contact us.

  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High thermal conductivity product 'TC-1050ALY'

High thermal conductivity product 'TC-1050ALY'

Incredible thermal conductivity of 1,000 W/mK! A high thermal conductivity product with three times the thermal conductivity characteristics of copper.

The "TC-1050ALY" is a unique product that combines our excellent high thermal conductivity material TPG, manufactured using our CVD technology, with various other materials. It possesses thermal conductivity characteristics three times that of copper and is lighter than aluminum. It can accommodate various sizes and shapes. It can be used for a variety of applications, including thermal diffusion materials, PCB thermal conduction core materials, and high-performance heat sinks. 【Features】 ■ Thermal conductivity characteristics three times that of copper ■ Lighter than aluminum ■ Adjustment of thermal expansion rate with sealing materials ■ Low thermal resistance ■ Reliability through passive conduction *For more details, please refer to the catalog or feel free to contact us.

  • Fine Ceramics
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Recycled Carbon Fiber <From Recycled Scheme Development to Processed Product Development>

Recycled Carbon Fiber <From Recycled Scheme Development to Processed Product Development>

Would you like to recycle the scrap and waste from the CFRP production process?

Our company provides technology for separating and recovering carbon fibers from scrap and waste generated during the manufacturing of CFRP products, and for recycling them into carbon fiber composites. The recycled carbon fiber composites can be utilized as filling materials for CFRP, reinforcing fillers, as well as insulation materials for construction, and functional materials that leverage X-ray permeability and electromagnetic wave shielding properties. We contribute to reducing the amount of CFRP industrial waste and developing products that utilize recycled carbon fibers, thereby strengthening your brand power. 【Features】 ■ Possession of carbon fiber recovery technology using solvent methods (chemical recycling) ■ Capable of separation and recovery while maintaining long fiber state ■ Can provide molded products such as non-woven fabrics, CFRTP boards, and pipes, allowing for designs tailored to applications in industrial materials, construction materials, sports goods, etc. ■ Support from product commercialization to marketing and channel development *For more details, please refer to the PDF materials or feel free to contact us.

  • fiber
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Film composite material "Film Pochicon"

Film composite material "Film Pochicon"

Challenging new possibilities for films with low linear expansion and high rigidity! It also has good adhesion properties for secondary processing and metals.

"Film-grade Pochicon" is a composite material for recyclable thermoplastic films, created by combining a special scaly "filler" with thermoplastic resin, offering low thermal expansion coefficient and high rigidity. Due to its low thermal expansion coefficient and good adhesion properties for secondary processing and metals, its applications extend to flexible substrates and multilayer boards. 【Features】 ■ High rigidity, bend resistance, and surface smoothness ■ Recyclability and low thermal expansion coefficient ■ Thermoplastic: easy secondary processing ■ Solder heat resistance 260°C for 60 seconds ■ Excellent dielectric properties ■ Low thermal fusion at 250°C *For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tisumo blended 3D printer resin composite material "Pochi Con Filament"

Tisumo blended 3D printer resin composite material "Pochi Con Filament"

A resin composite material blended with ultra-fine potassium titanate fibers to make 3D printed products more practical!

"Pochi Con Filament" is a 3D printer filament characterized by high dimensional accuracy and precision molding capabilities, allowing for the creation of functional parts such as robots. It offers high molding accuracy as a 3D printed product, enabling stable molding over long periods and achieving strength comparable to injection molding. Additionally, it is capable of creating fine parts and exhibits excellent sliding properties. 【Features】 ■ High precision molding capability ■ High dimensional accuracy ■ Excellent surface smoothness ■ Good sliding properties ■ Low aggressiveness towards nozzles *For more details, please download the PDF or feel free to contact us.

  • 2-2.png
  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Solution Case] Development of Sintered Bodies of Conductive Ceramics and Metals

[Solution Case] Development of Sintered Bodies of Conductive Ceramics and Metals

Considering the required characteristics as appropriate, optimize the selection of raw materials, mixing, and sintering conditions for development and manufacturing.

Alumina ceramics cannot be sealed using a bonding method like glass, so instead, a method is generally employed where frit glass is melted and poured into the small gap between the electrode and the valve to seal it. Therefore, the electrode materials in the sealing area require conductivity, high-temperature resistance, and halogen resistance, and it is also necessary to ensure that there is an appropriate thermal expansion coefficient relationship between the frit glass, alumina valve, and electrode. Considering the required characteristics of alumina powder and Mo powder (or W powder), the selection of raw materials, mixing, and sintering conditions are optimized to develop and manufacture conductive materials. When the melted frit glass flows into the small gap (capillary) due to capillary action, factors such as the surface roughness of the developed materials are also taken into account, and processes like centerless grinding are performed for finishing. *For more details, please refer to the external link page or feel free to contact us.*

  • Other machine elements
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceramic-metal composite materials

Ceramic-metal composite materials

Adjustment of the thermal expansion coefficient is possible! We are conducting the development of materials aimed at special properties.

Yakeshi Electric always understands the customer's "true aim" and "ultimate goal," and has been engaged in manufacturing and development tailored to their needs. Molybdenum/alumina composite sintered body (conductive, with adjustable thermal expansion coefficient). We are developing materials aimed at special properties such as control of conductivity and control of thermal expansion coefficient. [Other Sintered Products] ■ Porous materials ■ High and medium density tungsten lures ■ Composite metal sintered products ■ Prototype of Tai-raba (red snapper lure) ■ Weights for center of gravity shifting lures *For more details, please refer to the PDF materials or feel free to contact us.

  • Contract manufacturing
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood and plastic recycled composite material "Ecorokka"

Wood and plastic recycled composite material "Ecorokka"

For decks and walls! A new wood-based material that is highly durable and easy to maintain.

Air Water Ecrocca's "Ecrocca" is a new wood-based material that has the texture of natural wood, manufactured through the composite recycling of wood and plastic. It does not produce small splinters or rough edges, making it safe for small children and pets. Additionally, it is resistant to termites and decay fungi, offering excellent durability. It can be utilized in public facilities such as marine facilities and airports, as well as in green spaces, schools, and welfare facilities for decking materials, wall materials, fences, and more. 【Features】 ■ Wood-based new material made from wood and plastic ■ Reproduces the soft texture of wood ■ No splinters or rough edges ■ Excellent recyclability ■ Long-term stability of quality *For more details, please refer to the PDF materials or feel free to contact us. ★ If you would like a free cut sample, please apply through the "Contact Us" section. Product details can be viewed via "PDF Download."

  • Wood products
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wood and plastic recycled composite material "Ecorokka" *Cut samples available.

Wood and plastic recycled composite material "Ecorokka" *Cut samples available.

Strong against rain, wind, and sunlight, maintaining the texture of natural wood for a long time. Suitable for floors, exteriors, and facades.

"Ecologka" is a composite material made from wood and recycled plastic that replicates the appearance and texture of natural wood while achieving excellent weather resistance and durability. Unlike natural wood, it does not produce splinters or thorns, making it safe, and it does not rot, allowing for long-term maintenance of its aesthetic appeal. 【Product Lineup】 ◎ Flooring "DECK" ■ A series designed to suppress deformation caused by water absorption from rain and snow ■ Features an anti-static function that is effective during winter to combat static electricity ◎ Exterior Material "AIR LOUVER" ■ Uses high-strength and easy-to-process aluminum as the core material, ensuring excellent workability ■ Resistant to delamination, cracking, and localized swelling of the aluminum layer ◎ Exterior Material "AIR WALL" ■ Minimal aging deterioration and resistant to discoloration ■ Environmentally friendly, containing no halogens or heavy metals ★ If you would like a free cut sample, please apply through "Contact Us." You can view product details by downloading the PDF.

  • Wood products
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Magnet-attached composite material "Magnet-attached Z-1 Liner"

Magnet-attached composite material "Magnet-attached Z-1 Liner"

Combining a non-adhesive composite sheet with magnets significantly improves workability! Since it uses magnets, no adhesive is needed, enhancing ease of installation!

Tohoku Rubber's "Magnet-equipped Z-1 Liner" is a composite material that combines the impact-resistant rubber "Z-1 Liner" with a rubber magnet. There is no need for adhesives, bolts, or screws, and surface preparation (sanding) is not required. Additionally, it is highly flexible and can be applied to curved surfaces. The intended and potential applications are as follows: - Adhering to the inside of metal feed tanks, reducing labor and costs previously associated with adhesive application. - Preventing and improving the accumulation of dust, powders, and dirt generated within factories. 【Features】 ■ Prevents the accumulation of contact materials ■ No surface preparation required ■ No adhesive required ■ Can be applied to curved surfaces *For more details, please request documentation or view the PDF data available for download.

  • Rubber
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
About the benefits of CCM (carbon fiber reinforced carbon composites).

About the benefits of CCM (carbon fiber reinforced carbon composites).

Lightweight, resistant to breaking, and less prone to thermal deformation! A detailed introduction to the benefits of CCM.

Our company offers a material called 'CCM (Carbon Fiber Reinforced Carbon Composite)' that is lightweight, highly tough, and resistant to thermal deformation. The benefits of using CCM include the possibility of weight reduction. It allows for a reduction in the electrical energy used for heating and also shortens heating and cooling times. This means that production volume can be increased, contributing to further quality improvement. Additionally, its high toughness makes it easy to handle and safe to use, and it has the characteristic of being resistant to thermal deformation, resulting in a longer lifespan compared to metal. It can maintain product precision, such as in molds, and can be used maintenance-free on automatic transport lines. [Features] - Possibility of weight reduction - High toughness and resistance to cracking - Resistance to thermal deformation *For more details, please refer to the PDF document or feel free to contact us.

  • Other Auto Parts
  • Other polymer materials
  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Usage Example] CCM (Carbon Fiber Reinforced Carbon Composite) Furnace Floor

[Usage Example] CCM (Carbon Fiber Reinforced Carbon Composite) Furnace Floor

Lightweight, highly tough, and resistant to thermal deformation CCM! Introduction of examples used in furnace floors.

We offer a material called 'CCM (Carbon Fiber Reinforced Carbon Composite)' that is lightweight, highly tough, and resistant to thermal deformation. There are also cases where solid carbon furnace floors have been replaced with CCM. The benefits of this delivery include the ability to increase the weight of the furnace charge due to the lighter furnace floor, and less heat escaping to the can body, resulting in better heat distribution. Furthermore, its lightweight nature contributes to the reduction of electrical energy consumption. 【Features of CCM】 ■ Lightweight ■ High toughness and resistant to cracking ■ Resistant to thermal deformation ■ Structure similar to reinforced concrete *For more details, please refer to the PDF materials or feel free to contact us.

  • Other Auto Parts
  • Other polymer materials
  • Composite Materials
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Material Presentation] Rubber × Resin Cross-linked Composite Material 'Radicalock'

[Material Presentation] Rubber × Resin Cross-linked Composite Material 'Radicalock'

Introducing the composite material 'Radicalock(R)', which firmly bonds rubber and plastic using a bridge lock without the use of adhesives!

"Radicalock(R)" is a formulated rubber made by adding auxiliary materials and additives to peroxide-crosslinked synthetic rubber such as EPDM and silicone rubber, and then mixing it with a crosslinking reaction accelerator for plastics. It utilizes the technology of direct adhesion between plastics and rubber developed by Daicel Evonik Co., Ltd. Through the chemical reactions occurring in a mold loaded with plastic components, molecular chains (crosslinking chains) are formed at the interface between the rubber and plastic, creating a strong bond. 【Features】 ■ Solves adhesive problems ■ Usable with plastics ■ Simplifies the manufacturing process *For more details, please download the PDF or feel free to contact us.

  • Composite Materials
  • roller
  • Composites

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Composites

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.