Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
361～390 item / All 2430 items
Introducing RS-232/RS485 transceiver and USB bridge controller products!
Asix's RS232/RS485 transceiver products provide RS232/RS485 transceivers for various embedded devices. Asix's USB bridge controller products provide connectivity between serial and parallel interfaces for various embedded devices with a USB host interface.
Providing EtherCAT solutions such as EtherCAT host control ICs and modules, and peripheral control modules.
Nextu Corporation offers a wide range of EtherCAT host control ICs and modules, as well as EtherCAT peripheral control modules.
Standard EtherCAT slave controller SoC
The AX58200 is a 2/3-port EtherCAT slave controller SoC that integrates an EtherCAT slave controller (ESC) with an ARM Cortex-M4F and a DSP extension of up to 192MHz, along with two fast Ethernet PHYs. The AX58200 supports standard EtherCAT protocols such as CANopen over EtherCAT (CoE), File Access over EtherCAT (FoE), and Vendor Specific-protocol over EtherCAT (VoE), providing a cost-effective EtherCAT solution for industrial fieldbus applications including motion/motor/digital IO control, sensor data collection, robotics, and EtherCAT to IO-Link converters. The AX58200 comes in a 144-pin HSFBGA package measuring 10x10 mm with a 0.8mm pitch, compliant with RoHS, and supports an industrial-grade operating temperature range of -40 to 105°C.
Standard EtherCAT slave controller with dual-core MCU.
The AX58400 EtherCAT slave controller, which incorporates a dual-core MCU, is a SiP product based on STMicroelectronics' STM32H755 microcontroller. It features a dual-core 32-bit ARM Cortex-M7 core with DSP extensions (operating at up to 480MHz) and a 32-bit ARM Cortex-M4 core with an adaptive real-time accelerator (operating at up to 240MHz), along with an integrated EtherCAT slave controller (with 2 FE PHYs). The device includes an AES/TDES/HASH/HMAC hardware cryptographic accelerator, ROP/PCROP/tamper-proof security technologies, a true random number generator, and supports additional communication interfaces such as 10/100Mbps Ethernet MAC, USB OTG, camera I/F, TFT LCD controller, JPEG codec, SPI/UART/I2C/I2S/SAI/CAN/SDMMC/ADC/DAC/HDMI CEC/PWM/DFSDM, making it interoperable with all EtherCAT systems equipped with standard EtherCAT protocols such as CoE, FoE, and VoE.
SPI/local bus LAN controller, a standard USB to Ethernet conversion controller.
We provide an Ethernet controller suitable for embedded devices that can be connected to the CPU via SPI or local bus (SRAM-like) with 10/100Mbps and 1G speeds, as well as a USB host (2.0/3.2 Gen1) connected to the CPU, offering 10/100Mbps, 1G, and 2.5G Ethernet conversion controllers. Our USB to Ethernet conversion controllers also include products that support CDC-NCM and CDC-ECM.
![Wireless LAN Controller [RC-AP10]](https://image.mono.ipros.com/public/product/image/ec1/2001032364/IPROS1517993954654314767.png?w=280&h=280)
Central management controller for controlling wireless LAN access points.
We propose a solution! It will lead to improved operational efficiency! The RC-AP10 is a stationary wireless LAN controller that can be installed without a PC. ■ Centrally manage up to 250 compatible access points from Icom with a single unit. ■ Manage various settings (firmware, multi-SSID/VLAN/encryption/RADIUS/SNMP/SYSLOG, etc.) in bulk by group. ■ Up to 8 groups can be configured (up to 64 units per group). ■ Automatically set the optimal channel and power level based on the scan results of the access points. ■ Speed up handover during RADIUS authentication with roaming cache functionality. ■ Centralized authentication of MAC addresses for devices connecting to the wireless LAN. ■ Check the communication status and traffic of access points and automatically distribute the load. ■ Detect and display the operational status of access points. ■ Support for displaying operations such as stop/run, communication status (bandwidth management), list of connected devices, monitoring of unauthorized access, individual status display of access points, and bulk display of security settings.
Eligible for a 5-year warranty! Detects a wide range of failure conditions and features a cost-effective controller.
The "Altanium(TM) Mold Controller" is equipped with abnormal diagnosis and recovery functions, and it is also capable of controlling servo motors and valve gates. The navigation function on the full-color screen is user-friendly, and various configurations are available. It can be introduced into various injection molding environments. 【Features】 ■ Temperature control for 2 to 255 zones ■ Simple and intuitive operation ■ Large, intuitive high-resolution touch monitor ■ Automation of mold diagnostics ■ Expandable platform compatible with mold servo and valve gate control *For more details, please download the materials or feel free to contact us. *You can also view the "Benefits of Hot Runner Systems" from the link below.
Eliminate inefficiencies to save time and costs! Supports multiple methods including manufacturing execution systems.
The connection of the Altanium mold controller to the network supports multiple methods, including interfacing with injection molding machines. By connecting devices on the manufacturing floor, inefficiencies are eliminated, saving time and costs. It is compatible with Industry 4.0 and IIoT applications, featuring an OPC UA server, Euromap 82.2 machine interface, and virtual network computing. 【Features】 <OPC UA Server> ■ Supports the OPC UA data exchange standard ■ Can interface with manufacturing process or production monitoring systems ■ Improves overall equipment efficiency ■ Enables the rapid production of higher quality parts at the lowest possible cost *For more details, please refer to the PDF document or feel free to contact us.
A rich set of features and a compact design! Achieve reliable and stable performance.
The "Altanium Neo 5 Compact" is well-suited for the injection molding industry that requires a high-precision hot runner temperature controller for low to medium cavity molds. It is suitable for various molding environments and incorporates basic and extended operation modes for easy operation. By reducing the time required to become familiar with the simple user interface, it lowers training costs and ensures reliable and stable operations. 【Features】 ■ Control up to 48 zones ■ Customizable basic and extended modes ■ Process monitoring and data collection ■ Small footprint ■ Digital interface with IMM *For more details, please refer to the PDF materials or feel free to contact us.
Next-generation environmental-resistant solid-state power controller
This is a 40A rated DC power supply, a next-generation solid-state power controller with 2 channels. It has a built-in self-diagnostic test function that diagnoses hazardous situations at startup and during use. It is designed for fast operation with bounce-free switching, and additional configurations can be accommodated through software design.
A temperature controller that is very space-saving and has excellent temperature stability.
■Due to its very high stability, it is widely used in situations where stability is important, such as machine vision systems, particle measurement systems, and molecular analysis. ■Drive current: +/-2.5A to +/-10A ■Compatible with thermistors, RTDs, and IC sensors ■0.0012℃ linear stability ■Compact package ■Current limit adjustment mechanism ■Drive voltage: +5V to +30V
Embedded LD driver and temperature controller
【485 Series LaserPak】 - Equivalent quality to benchtop type - Has an analog control interface - Equipped with RS232/USB interface 【585 Series TECPak】 - Equivalent quality to benchtop type - Has an analog control interface - Equipped with RS232/USB interface 【586 Series TECPak】 - Equivalent quality to benchtop type - High power TEC controller 【685 Series ComboPak】 - Equivalent quality to benchtop type - Laser controller & TEC controller (for low power)
HCP Corporation is the world's first manufacturer to commercialize periodically poled nonlinear optical devices (PPLN/PPLT crystals).
A periodically poled optical element (PPLN/PPLT crystal) is fixed to a holder and oven, allowing for wavelength conversion and wavelength tuning at optimal efficiency through temperature control.
◆Drive current 500mA to 30A, TEC output 32W to 230W◆Multi-channel (4CH)
◆7144, 7244, 7154, 7254 Series The multi-channel laser driver and TEC controller are designed as a multi-source for burn-in testing of laser diodes (or laser oscillators). They are very compact and come with a rack mount kit, allowing them to be installed in a 19-inch rack for use. (The accuracy is comparable to that of bench-top models, which is an attractive feature.)
◆Instrument-type temperature controller◆Analog and digital types◆0.001℃ linear stability
The TEC or RH current is driven at +/-5A. It supports thermistors, RTDs, and IC sensors. It comes with a free LabVIEW driver. There are hot and cold current limits, as well as high and low temperature limits. It features a remote analog setpoint input. The LFI3751 series from Wavelength Electronics is a benchtop (instrument-type) temperature controller. It allows for various settings through its front panel, making it easy to use. Please consider it for lab use. The front display panel allows for checking the temperature setpoint, resistance value, output current value, and voltage value. Wavelength Electronics, based in the United States, manufactures and sells laser controllers and temperature controllers. Their low-noise drivers for quantum cascade lasers (QCL) and benchtop LD controllers and temperature controllers are adopted by various universities and research institutes. They also offer a wide range of OEM modular and IC package products.
◆ APC, ACC control mode ◆ +/-2.2A TEC or RH current ◆ TTL remote signal compatible
Low noise: < 1 μA RMS Adjustable current limit Cable included for LD connection Compact package Wavelength Electronics' LDTC1020 and LDTC0520 are board-type OEM laser diode controllers that combine the low-noise FL500 compact laser diode driver with the highly stable WTC3243 temperature controller. They are ideal for applications where the mode and linewidth of the laser diode are critical, such as spectroscopy. The LTC1020 includes two FL500 units, with a maximum output current of 1 A. The LDTC0520 has one FL500 unit, with a current value of 500 mA. Cables are included.
◆Small component package (SIP PCB mount) ◆Compatible with thermistors, RTDs, and IC sensors ◆High linear stability
Thermistor, compatible with RTDs and IC sensors Evaluation boards and accessories available Wavelength Electronics' WTC series (IC type) is an ideal component for embedded temperature controllers. We have evaluation boards prepared for your use in conjunction with your PCB board evaluation. Additionally, we offer a variety of product accessories for this product to suit your needs. Wavelength Electronics, based in the United States, manufactures and sells laser controllers and temperature controllers. Their low-noise drivers for Quantum Cascade Lasers (QCL) and benchtop LD controllers and temperature controllers are adopted by various universities and research institutes. They also offer a wide range of OEM modular and IC package products.
◆ Tabletop instrument type ◆ High linear stability ◆ USB, Ethernet interface
User-friendly instrument package 0.00009°C high linear stability Data collection and storage using USB and Ethernet The TCxx series (for laboratory use) from Wavelength Electronics is a high-performance instrument-type temperature controller. It offers very stable temperature control and is easy to use with a touchscreen interface. Additionally, data collection and storage can be easily performed using USB and Ethernet. Customers who wish to perform external control should use the dedicated software. Wavelength Electronics, based in the United States, manufactures and sells laser controllers and temperature controllers. Their low-noise drivers for quantum cascade lasers (QCL) and benchtop LD controllers and temperature controllers are adopted by various universities and research institutions. They also offer a wide range of OEM modular and IC package products.
Remote control operation available! Introducing the American-made pulse-type bar ionizer controller.
At Gen Trade Co., Ltd., we handle the "Pulse Type Bar Ionizer Controller." It allows for digital adjustment and display. It can be operated with a remote control. Additionally, this product is made in the USA. 【Features】 ■ Operable with a remote control ■ Digital adjustment and display ■ Made in the USA *For more details, please refer to the related link page or feel free to contact us.
RFID control unit. Enables bulk reading of IC tags.
This is a dedicated reader that enables bulk reading of IC tags (13.56MHz). By connecting a dedicated antenna, it can be utilized for various applications. To consider its use as part of a system, the communication with higher-level devices is designed to have a simple interface using serial or LAN.
Aldic series! 4-wire type RGB control controller using PWM method.
The aldic series 4-line RGB control controller LTK-02 for LED lighting is a 4-wire type RGB control controller using PWM method. Art Tech Co., Ltd. specializes in LED application products. We build LED lighting, backlights, and display application products tailored to our customers' needs. Aldic is a new brand of LED-related equipment from Art Tech. 【Features】 ○ 17 lighting pattern modes switchable with the MODE switch ○ Speed adjustment with 8 levels using the SPEED switch ○ Brightness adjustment with 8 levels using the BRT switch ○ High output of 18A with each RGB up to 6A ○ Wide range input of DC12V to 24V For more details, please contact us or download the catalog.
Slim and compact design! Capable of switching between static, blinking, display patterns, and scrolling display.
The full-color LED display controller CMP-003 fully supports ROHM's full-color units operating in 16-dot and 24-dot/external clock mode. Simply connect the power supply and the full-color dot matrix unit for easy full-color display. It allows for a variety of display patterns, including static, blinking, pattern switching, and scrolling displays. You can also scroll text over a background image or display another image. 【Features】 ○ Equipped with bitmap format display data transfer function via USB 2.0 connection / LAN connection (100Base compatible) ○ Display data can be easily created in bitmap format → Graphic display is also possible ○ Equipped with 512MB flash memory ○ Display area can be set up to a maximum of 4 blocks ○ Control circuit construction using gate array For more details, please contact us or download the catalog.
Blown away by shock waves! Pulse blow controller that reduces air consumption by 50%.
We handle the "Pulse Blow Controller" from Chiyoda Tsusho Co., Ltd., which operates the internal cylinder using only air from the supply port without the need for a power source and generates pulses. Since the opening and closing times of the valve are the same, if the working time is the same as that of conventional continuous blowing, air consumption can be reduced by 50%. 【Features】 ■ 50% reduction in air consumption ■ Easy pulse adjustment ■ Increased effectiveness of air blowing *For more details, please download the PDF or contact us.
Avoid device shutdown due to HDD crash; no need for device shutdown during troubles.
The RAID control system "Dual/Triple HDD" completely avoids equipment downtime during HDD crashes through a uniquely developed RAID control system for semiconductor devices. It is designed to ensure stable operation, preventing data loss due to busy states during read/write operations. The RAID control system also supports SSDs, allowing SSDs to be installed instead of HDDs. For more details, please download the catalog.
Control alarm devices via wireless communication! Wiring is easy with screwless terminal blocks.
The "PWS type" is a wireless control unit that enables wireless communication using specific low-power radio. "INPUT" refers to contact outputs from switches, relays, or abnormal output sensors of devices. "OUTPUT" includes rotating lights and indicator lights. Additionally, we also offer the "COB80 series," a push-button switch for hoists that is easy to arrange since it is in stock. 【Features】 ■ Wireless communication using specific low-power radio ■ Long-distance communication possible: approximately 350m outdoors and approximately 100m indoors *Propagation distance may vary depending on the usage environment ■ Can operate on dry batteries ■ Easy wiring with screwless terminal blocks *For more details, please refer to the PDF materials or feel free to contact us.
