Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
331～360 item / All 2392 items
Super compact! Super low price! Easily control CO2 gas concentration at a low cost.
When performing time-lapse cell culture under a microscope, we manage the gas concentration. We can offer this at a much lower price than before.
Easy tightening pneumatic controller "KAC-1"
This product allows anyone to easily perform similar tightening operations simply by setting it up in the air piping of your currently used air impact wrench or oil pulse wrench. 【Features】 ■ The air impact wrench or oil pulse wrench currently in use will have an automatic stop function. ■ With the learning function, if set to auto mode, it can always perform the same tightening operation. ■ It is a compact model with a thickness of only 65mm, integrating a pressure sensor and solenoid valve, and is suitable for wall mounting. ■ It features a highly visible LCD screen. ■ It notifies the completion of tightening with a buzzer and a high-brightness lamp. ■ It monitors air pressure drops that could cause insufficient torque and alerts you to abnormalities with a buzzer and lamp.
Equipped with a ceramic heater and Peltier in the socket! Thermal control is possible!
We would like to introduce the "Active Controller" handled by SDK. It is possible to perform thermal control, such as measuring the temperature characteristics of a device, by equipping a ceramic heater or Peltier in the socket. If you have any requests, we can conduct simple thermal fluid and stress analysis using 3D CAD, and we can also manufacture surrounding fixtures other than the socket, so please feel free to consult with us. 【Features】 ■ Equipped with ceramic heater or Peltier in the socket ■ Capable of performing thermal control ■ Simple thermal fluid and stress analysis can be conducted using 3D CAD *For more details, please refer to the PDF materials or feel free to contact us.
General-purpose control and monitoring device based on Compact PCI bus.
We will propose a system tailored to the customer's needs by fully utilizing the resources of the codec from the system design proposal, and we will carry out H/W and S/W development. Since we have redundant power units at the shelf level, main CPU boards, shared memory boards, built-in LAN interfaces on the main CPU boards, and compact PCI bridge boards between shelves, we can build a highly available system. Each board supports hot-swapping, allowing for board replacement without turning off the power even while the system is running. Additionally, we can develop new solutions for special interfaces. 【Features】 - Redundancy of key components: Continuous operation with minimized downtime is possible. - Hot-swapping support: Maintenance and operation can be performed while powered on. - Various DI, DO, LAN, and various serial interfaces are available. *For more details, please refer to the PDF materials or feel free to contact us.
It is a unit with an integrated battery/control system for Diwartokin. It is ideal for mobile products in nursing care and medical devices.
It is a unit that combines the battery and control box. The battery is detachable and easy to remove. It contains a 4.5Ah lead battery. Designed with safety as the top priority, it is equipped with an emergency stop button, an emergency descent button, and a battery & lifecycle indicator. It is a combination of the Dewart Okin Acccontrol 4.5 dedicated switch and an electric actuator.
For precise temperature control in heating processes!
The PCC-100 model digital temperature controller is a digital temperature controller specifically designed for hot plates. It is ideal for precise temperature control in heating processes and can be used in various situations such as semiconductor processes, evaluation systems, heating processes, preheating processes, and drying. Simply connect the power supply and use the dedicated cable (just connect it with a one-touch connector) to start using it immediately.
Programmable temperature control at low cost is possible!
The programmable temperature controller PCC-107A is a temperature controller designed for heating applications that require temperature programming. It can be used simply by connecting the power supply to an outlet. (Wiring for temperature sensors and other components is installed at the back. There are also front connector and front terminal block types available.) In addition to being useful for solder preheating, resin curing, and drying processes, it can be widely utilized as a control controller for precision heating processes.
Just plug it into the outlet, and it's easy to use!
The external sensor-controlled digital temperature controller is a PID-controlled digital temperature controller specifically designed for hot plates (the hot plate is pre-tuned before shipment). It can be used immediately by simply connecting the power supply and connecting the hot plate with a dedicated cable (one-touch connector). It can be utilized in various situations, including precise temperature control for heating processes, semiconductor processes, evaluation systems, heating processes, preheating processes, and drying.
Ideal for managing oil baths and similar applications that require a continuous constant temperature!
The constant temperature controller PCC-301 is an ultra-precise digital temperature controller. It is ideal for managing applications that require a continuous constant temperature, such as oil baths. The standard model is an EIA rack mount type, but it can also be adapted for integration into various devices.
This is a controller compatible with a hot plate for lead-free soldering.
The digital temperature controller "PCC100FL3" is a controller suitable for fluxless soldering hot plates. It is designed for a three-channel low-oxygen concentration process. 【Features】 ○ Temperature controller with nitrogen gas digital flow meter (3 channels) ○ Temperature program compatible with PCC107FL3 ○ When combined with a nitrogen purge hot plate, it enables precise temperature processes at a low cost. For more details, please contact us or download the catalog.
It is possible to supply power to large-capacity hot plates.
The PCC400 model boasts a large capacity of 5kW (200V), enabling power supply to large and high-capacity hot plates, which was not possible with previous controllers. The PCC400 model employs a large dedicated case to prevent overheating even with increased electrical capacity. Additionally, it comes standard with a circuit protector that automatically cuts off the circuit in case of an emergency. 【Features】 ○ 25A high-capacity model ○ Pursuit of safety ○ Rich customization options For more details, please contact us or download the catalog.
Control of diesel engine generator speed and control of small gas engine generator speed.
This product is an engine control device that can be used for controlling the rotational speed of diesel engine generators and small gas engine generators. It is equipped with features such as a simple rack set function, isochronous/droop switching function, and black smoke reduction control during engine start-up. 【Features】 ■ 2-wire and 5-wire ■ Frequency droop ■ Simple rack set function ■ Rotational speed setting: 1 point ■ External input terminals: 3 points ■ Isochronous/droop switching function ■ Black smoke reduction control during engine start-up *For more details, please refer to the PDF document or feel free to contact us.
Controller compatible with engine speed increase/decrease command for generators!
The "XS-80C-AT" is a digital governor controller for generator engines. Unlike conventional analog controllers, the controller itself has no adjustment points for parameter settings; all parameters are set by connecting the controller to a computer and configuring them on the computer screen. 【Features】 ■ High-speed droop function during power reduction ■ Support for engine acceleration and deceleration contact commands ■ kW droop ■ Monitoring function ■ Alarm output function *For more details, please refer to the PDF document or feel free to contact us.
Both the power supply and welding head can be controlled! Compact and lightweight design, perfect for portable work!
The "FPA 3020 AC/DC" is a circumferential welding system controller designed for FCH and FOH welding heads. Due to its compact and lightweight design, it is suitable for portability. It controls both the power supply and the welding head, ensuring high welding quality with 100% reproducibility. 【Features】 ■ Built-in water-cooled device with flow control ■ Built-in microprocessor controller ■ High-sensitivity touch screen operation panel (color) ■ Language selection available (German, English, French, Russian, etc.) ■ Remote control FRC-FPA 3020 with 10m cable *For more details, please refer to the PDF materials or feel free to contact us.
It boasts an unmatched precision among online viscometers!
OptiColor's viscometer has been developed to meet the needs of manufacturing sites. In addition to its pressure-resistant explosion-proof structure, it boasts unmatched precision in repeatability around the set viscosity value, surpassing other online viscometers.
Motion control board controller C-VX87x series
● Comprehensive lineup ・PCI: 4-axis, 6-axis, 8-axis, 12-axis ・PCI Express: 4-axis, 6-axis ・Command compatibility ・Pin arrangement compatibility (4/8-axis compatible, 6/12-axis compatible) ● Pin arrangement compatibility with C-V87x and C-87x ● Reduction and simplification of commands: Reviewed the complex commands in the C-V87x series, halving the number of commands and making them simpler and easier to use. ● Significantly reduced startup time compared to the old series (C-87x series) ● Command reservation function: Up to 10 commands can be reserved for execution next. After a command ends, they are executed efficiently in sequence, and for continuous drive, this is achieved with "command execution 250ns + previous command end 50ns + FSPD × cycle." ● Support for high-speed/high-resolution control: Significantly increased pulse output frequency, counter BIT count, and encoder pulse input frequency.
Multiple guide units can be controlled with a single operation panel.
The guide controller D-MAX can control multiple guide units from a single operation panel. It can be customized with software to meet customer needs and is compatible with various applications. For more details, please download the catalog (English version) or contact us.
It is an instrument for processing electrical signals and outputting instructions.
The control unit C-28C C-48 is an instrument that controls the temperature of the zirconia O2 sensor while converting and processing electrical signals for indication and output. It features a compact and user-friendly DIN 96×96 size with a large display for good visibility. It is a free-range specification that allows for arbitrary output scaling in each range. For more details, please contact us or refer to the catalog.
Using specific low-power wireless technology, there is no need for a license application, making it easy to implement and possible to reduce running costs such as communication fees and wiring construction expenses.
【Wireless Control Unit PWS Type】 The PWS type can be selected from two types according to the environment and application. ■ High-Speed Version ≪For environments where short input intervals and responsiveness are required≫ - Supports short pulse signal inputs! - A response-back function that confirms wireless reach. ■ Energy-Saving Version ≪For environments where power supply is difficult and radio conditions fluctuate≫ - Operates on dry batteries! - Unique multi-hop function. - A radio band with minimal interference. *For details, please download the catalog or feel free to contact us. Product Page https://www.patlite.co.jp/product/search.html?code=&search=1&code=2%3A3&keywords=PWS&x=91&y=17 ↓↓↓ Official Online Shop ↓↓↓
![[FA Site Improvement Case] Mirroring Notification of Equipment Status via "Wireless"](https://image.mono.ipros.com/public/product/image/3e8/2000332370/IPROS52709412210469612823.jpeg?w=280&h=280)
[Reduced Wiring/Wireless Notification] Achieving "Visualization of Remote Devices"! Supports distant buildings as well.
We will introduce an example of improvement in FA (Factory Automation) sites proposed by Patlite. Even if an emergency occurs in a distant location, by introducing our wireless control unit "PWS," it becomes possible to respond quickly. In a case where a chemical leak occurred on the production line, when the cleaning shower is activated, the contact output linked to the shower turns ON. This wirelessly notifies the office located in a separate building about the chemical leak. In this way, it has become possible to monitor the situation at each site from the office, enabling smooth responses to troubles in distant locations. 【Example】 ■ Benefits of Implementation - Low construction costs with wireless technology - Establishment of a notification system to a separate building using multi-hop functionality - Location identification with 5 output contacts (receiver) *For more details, please refer to the PDF materials or feel free to contact us. https://www.patlite.co.jp/ ↓↓↓ Official Online Shop ↓↓↓
A wireless unit that allows for easy remote notification with just this one device.
Wireless Control Unit WIO Series The Andon Kit (Model WIO-B1S-001) includes a transmitter, receiver, LED units (red, yellow, green), and an AC adapter for use on the receiver side. By attaching the LED unit to the receiver side, the device's status is mirrored! No need for a computer or software! Reliable wireless communication using Bluetooth(R) Long Range The wireless range is 100m in line of sight, and with a relay function, long-distance communication of up to 400m is possible! ↓↓↓ Official Online Shop PATLITE SHOP Listing Page ↓↓↓
You can save time in designing control systems using Quanser's QUARC. There is also a free trial version available. Be sure to give it a try!
Quanser products are fully integrated with MATLAB/Simulink, including devices (Plants), amplifiers, data acquisition boards, and even curricula. When MATLAB users design control models, Quanser's QUARC software is required. *There is also a 30-day free trial version available. https://www.quanser.com/products/quarc-real-time-control-software/
![[Technical Information] Application Areas of Motion Controllers and Differences from General Positioning.](https://image.mono.ipros.com/public/product/image/e70/2000099262/IPROS1266818206952892612.png?w=280&h=280)
This is a technical document that will help engineers who are unsure about when to use motion controllers.
I often hear questions like, 'In what situations should I use a motion controller?' or 'I don't understand the differences.' Therefore, I would like to introduce the distinctive advantages of motion controllers, points to consider in their design, and how to differentiate their use from positioning units, sharing my experiences over several installments.
Using a DSP approach, we provide high noise resistance and high performance!
The "IP175D" is a 6-port switch controller that incorporates SSRAM and five 10/100M Ethernet transceivers. This product has many rich features for different applications. These applications include router applications, firewalls, IEEE802.1Q, IGMP snooping, and policy-based QoS. 【Features】 ■ Built-in 6 MAC + 5 PHY ■ Each port supports 10Base-T and 100Base-TX ■ Supports 2K MAC addresses ■ Auto-polarity support (10Mbps) ■ Broadcast storm protection support *For more details, please refer to the PDF document or feel free to contact us.
Introducing RS-232/RS485 transceiver and USB bridge controller products!
Asix's RS232/RS485 transceiver products provide RS232/RS485 transceivers for various embedded devices. Asix's USB bridge controller products provide connectivity between serial and parallel interfaces for various embedded devices with a USB host interface.
Providing EtherCAT solutions such as EtherCAT host control ICs and modules, and peripheral control modules.
Nextu Corporation offers a wide range of EtherCAT host control ICs and modules, as well as EtherCAT peripheral control modules.
Standard EtherCAT slave controller SoC
The AX58200 is a 2/3-port EtherCAT slave controller SoC that integrates an EtherCAT slave controller (ESC) with an ARM Cortex-M4F and a DSP extension of up to 192MHz, along with two fast Ethernet PHYs. The AX58200 supports standard EtherCAT protocols such as CANopen over EtherCAT (CoE), File Access over EtherCAT (FoE), and Vendor Specific-protocol over EtherCAT (VoE), providing a cost-effective EtherCAT solution for industrial fieldbus applications including motion/motor/digital IO control, sensor data collection, robotics, and EtherCAT to IO-Link converters. The AX58200 comes in a 144-pin HSFBGA package measuring 10x10 mm with a 0.8mm pitch, compliant with RoHS, and supports an industrial-grade operating temperature range of -40 to 105°C.
Standard EtherCAT slave controller with dual-core MCU.
The AX58400 EtherCAT slave controller, which incorporates a dual-core MCU, is a SiP product based on STMicroelectronics' STM32H755 microcontroller. It features a dual-core 32-bit ARM Cortex-M7 core with DSP extensions (operating at up to 480MHz) and a 32-bit ARM Cortex-M4 core with an adaptive real-time accelerator (operating at up to 240MHz), along with an integrated EtherCAT slave controller (with 2 FE PHYs). The device includes an AES/TDES/HASH/HMAC hardware cryptographic accelerator, ROP/PCROP/tamper-proof security technologies, a true random number generator, and supports additional communication interfaces such as 10/100Mbps Ethernet MAC, USB OTG, camera I/F, TFT LCD controller, JPEG codec, SPI/UART/I2C/I2S/SAI/CAN/SDMMC/ADC/DAC/HDMI CEC/PWM/DFSDM, making it interoperable with all EtherCAT systems equipped with standard EtherCAT protocols such as CoE, FoE, and VoE.
SPI/local bus LAN controller, a standard USB to Ethernet conversion controller.
We provide an Ethernet controller suitable for embedded devices that can be connected to the CPU via SPI or local bus (SRAM-like) with 10/100Mbps and 1G speeds, as well as a USB host (2.0/3.2 Gen1) connected to the CPU, offering 10/100Mbps, 1G, and 2.5G Ethernet conversion controllers. Our USB to Ethernet conversion controllers also include products that support CDC-NCM and CDC-ECM.
![Wireless LAN Controller [RC-AP10]](https://image.mono.ipros.com/public/product/image/ec1/2001032364/IPROS1517993954654314767.png?w=280&h=280)
Central management controller for controlling wireless LAN access points.
We propose a solution! It will lead to improved operational efficiency! The RC-AP10 is a stationary wireless LAN controller that can be installed without a PC. ■ Centrally manage up to 250 compatible access points from Icom with a single unit. ■ Manage various settings (firmware, multi-SSID/VLAN/encryption/RADIUS/SNMP/SYSLOG, etc.) in bulk by group. ■ Up to 8 groups can be configured (up to 64 units per group). ■ Automatically set the optimal channel and power level based on the scan results of the access points. ■ Speed up handover during RADIUS authentication with roaming cache functionality. ■ Centralized authentication of MAC addresses for devices connecting to the wireless LAN. ■ Check the communication status and traffic of access points and automatically distribute the load. ■ Detect and display the operational status of access points. ■ Support for displaying operations such as stop/run, communication status (bandwidth management), list of connected devices, monitoring of unauthorized access, individual status display of access points, and bulk display of security settings.
