Cutting Machine Product List and Ranking from 346 Manufacturers, Suppliers and Companies

Automatic length cutting machine (with corner cutting function)

Cutting off unnecessary corners. Automating the series of operations for safety and efficiency.

We have prepared a model of the compact and user-friendly semi-cut automatic cutting machine, which has received positive feedback, equipped with a "corner cutting device" for processing board widths of 610mm. From the touch panel operation screen, you can freely select the corner cutting position (front cut or rear cut). Please consult us regarding the width and length to be cut off. By processing materials before molding all at once, we achieve more efficient work. *For details, please check the PDF materials. Product videos are also available on YouTube.

Company：内田機械工業
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting steel pipes. KENOH high-speed cutting machine 305/355mm.

KENOH High-Speed Cutting Machine 305mm 1400W ECC-305/355mm 1400W ECC-355

Cutting of iron pipes and angle materials. This device has a single insulation structure, so please be sure to ground it. This product is manufactured in accordance with or conforms to the technical standards based on the Electrical Appliance and Material Safety Law (products not subject to the Electrical Appliance and Material Safety Law). 【Features】 ■ Angle cutting: 0 to 45 degrees left and right ■ Equipped with a one-touch vise ■ Grinding wheel dimensions (mm) - ECC-305: Outer diameter φ305 × thickness 2.8 × inner diameter φ25.4 - ECC-355: Outer diameter φ355 × thickness 2.8 × inner diameter φ25.4 ■ Usable cutting tools: Reinforced cutting wheels with a maximum operating peripheral speed of 72 m/s (4300 m/min) or higher ■ Voltage: AC100V / Frequency: 50/60Hz / Current 15A / Rated power consumption 1450W ■ No-load rotation speed: 3600 min^-1 / Cord length (approx.) 2m / Rated time: 15 minutes ■ Set contents: 1 cutting wheel (attached to the main unit) and 1 wrench * For DIY use only. Model numbers: 25562/25563 * For more details, please feel free to contact us.

Company：コンヨ本社
Price：Other

Power tools
Cutting Machine

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Equipment Introduction】Cutting Machine

Our company has the AMADA/Noritake HFA300 and NCS-2A/100 cutting machines.

We would like to introduce the machinery and equipment owned by Kanapresto Co., Ltd. Our company owns a total of two cutting machines: the HFA300 and NCS-2A/100 from AMADA/noritake. We are a company based in Wakayama Prefecture that specializes in high-frequency hardening (quenching) and shaft hole processing. Please feel free to consult us when needed. 【Machine Overview】 ■HFA300: 1 unit ■NCS-2A/100: 1 unit *For more details, please refer to the PDF document or feel free to contact us.

Company：カナプレスト本社
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electromagnetic Steel Sheet Bevel Cutting Device "Core Cut Line (CCL)"

Transformer manufacturing equipment for cutting electromagnetic steel sheets into various shapes.

The "CCL Series" is an electromagnetic steel sheet bevel cutting device manufactured by ATS Co., Ltd., a specialist in stacked iron core lines, wound iron core lines, corrugators, welding, and bending lines. It consists of a machine configuration with an uncoiler, loop, feeder, punch, V-notch, turning shear, out conveyor, and stacker, and the loading methods include hammer method, pin reference loading method, and end face reference loading method. [Model Types] ■ CCL-360 ■ CCL-500 ■ CCL-700 ■ CCL-1000 *For more details, please download the PDF or feel free to contact us.

Company：エーティーエス
Price：Other

Plastic processing machines (cutting and rolling)
Machinery and equipment installation/dismantling/relocation
Conveyor
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Yoshimura Sangyo Co., Ltd. Introduction of Equipment Machinery and Operations

We have a large number of equipment machines, including hydraulic cutting machines, rigid band saws, and argon welding machines!

At Yoshimura Sangyo Co., Ltd., we engage in the production of various signs, the manufacturing of various metal processing materials (metal handrails), exterior wall and roof construction, and curtain board work. For all your needs regarding metal processing and manufacturing, including architectural hardware, please leave it to us. We will propose and manufacture according to your requests. On our company website, we showcase our equipment, including hydraulic shears and monorail hoist ceiling cranes, as well as various work scenes such as drilling operations through photographs. 【Equipment Owned】 ■ Hydraulic Shear ■ Hydraulic Press ■ Monorail Hoist Ceiling Crane ■ Rigid Band Saw (Contour Machine, Band Saw) ■ Plasma Cutter *For more details, please refer to the PDF materials or feel free to contact us.

Company：吉村産業
Price：Other

others
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bulk Waste Cutting Machine "Push Cutting Machine (Hydraulic Type)"

Active in cutting lagging ropes produced in the paper industry! Powerful cutting processing of FRP products and fish nets is also possible!

The "Push-Cutting Type Cutting Machine (Hydraulic)" is a bulky waste cutting machine with a structure that allows for high durability of the blades and easy replacement. It cuts materials that are difficult to cut with shear-type cutting machines or dual-shaft crushers, such as large ropes and wire-reinforced conveyor belts, using the sharp blades of the push-cutting type. Cutting processing of materials that could not be handled before, such as large ropes, FRP products, and fish nets, has now become possible. 【Features】 ■ Powerful cutting with the push-cutting type ■ Suitable for strong cutting processing of FRP products, fish nets, etc. ■ Blades have a high durability and an easy-to-replace structure ■ Automatically cuts sequentially with a powerful force (approximately 150 tons) at lengths of 50mm to 400mm after input in one cycle ■ Facilitates metal recovery and incineration processing, reducing disposal costs and promoting recycling *For more details, please refer to the PDF document or feel free to contact us.

Company：ヘリオス
Price：Other

Crusher
Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Equipment Introduction】Sample Cutting Machine, Resin Filling Machine, Polishing Machine

Check and inspect the quenching condition! Introducing equipment that is useful beyond just quenching applications!

We would like to introduce our equipment, which includes a "sample cutting machine, resin embedding machine, and polishing machine." This equipment is designed to confirm and inspect the quenching state. In addition to quenching applications, it can be used for purposes such as metal cutting surface verification in metallurgy, product inspection, universities, and research institutions. Furthermore, we can accommodate requests for inline integration and size modifications of each device. 【Features】 ■ Confirmation and inspection of the quenching state ■ Verification of metal cutting surfaces for metallurgy, product inspection, universities, and research institutions ■ Inline integration and size modifications of each device can be accommodated as per requests *For more details, please refer to the PDF materials or feel free to contact us.

Company：丸菱電子本社工場
Price：Other

Processing Contract
Contract manufacturing
Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PENTA Fiber Laser 2D Cutting Machine "AWING-2512"

Equipped with Procutter 2.0! Maintains high productivity and supports cutting.

The "AWING-2512" is a fiber laser 2D cutting machine designed specifically for 4×8 size, featuring a full cover for safety and a space-saving model. It allows for easy installation and accommodates flexible installation spaces, enabling operation in a short period. Additionally, it achieves high cutting quality and precision processing, realizing excellent cost performance. 【Features】 ■ Design specialized for 4×8 size ■ Full cover for safety considerations ■ Space-saving model ■ Capable of operation in a short period ■ Achieves high cost performance ■ Demonstrates high capability in improving user productivity *For more details, please refer to the PDF document or feel free to contact us.

Company：インテックス本社
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Amada die for reversible 1V die holder

Reduce the setup for mold exchange. Centering after the die holder is set is unnecessary during mold exchange.

This is a segmented 1V die holder product. By reducing setup time for 1V dies and inverting the step bend and clamping plate, it is possible to securely fix even narrow dies. The fixing method involves bolting from the front.

Company：インテックス本社
Price：10,000 yen-100,000 yen

Other molds
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tire Cutting Machine "ismart72G"

Multi-species compatible with a maximum work size of 100×300mm! A tie bar cutting machine that automatically handles magazine storage.

The "ismart72G" is a device that automatically retrieves molded lead frames set in a magazine, removes the die-cut parts using a press mold, and stores them back in the magazine. Additionally, it conducts a complete visual inspection of the product appearance after cutting through image inspection. Please feel free to contact us if you have any inquiries. 【Features】 ■ Supports multiple varieties (maximum work size: 100×300mm) ■ Complete visual inspection with 5 million pixels ■ High-speed specification: 80 spm ■ Mold ID recognition using RFID tags ■ Weight: 1,050 kg ■ Device dimensions: 1,430(W)×1,040(D)×1,712(H) *For more details, please download the PDF or contact us.

Company：日精電子本社
Price：Other

Plastic processing machines (cutting and rolling)
Other processing machines
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

24kW fiber laser cutting machine/bender introduction

Introduction of new models enables more diverse responses! Quick handling of small lots as well.

At Kaneyoshi Co., Ltd., we have introduced a Trumpf 24kw fiber laser cutting machine and a bending machine. The 24kw fiber laser cutting machine "TL5030fiber" enables ultra-fast cutting of both thin and thick plates due to its overwhelming high output of 24kw. Additionally, we have installed seven "TruBend 7050" bending machines to provide our customers with quick and flexible delivery responses. 【Specifications of the Fiber Laser Cutting Machine (Excerpt)】 ■ Processing Range - Plate Size: 5×10 - Materials: Steel, Stainless Steel, Aluminum, Copper, Brass ■ Bevel Processing - Plate Thickness: Up to 25mm, C3 (45 degrees) *For more details, please download the PDF or feel free to contact us.

Company：かねよし
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Speed Wire Cutting Machine HB Series [Ohno Seiko Co., Ltd.]

High-speed wire cut processing! Achieving low costs! New possibilities opened up by molybdenum wire cutting! "Molybdenum Wire Electric Discharge Machine"

The "HB series" is a molybdenum wire electrical discharge machining (EDM) machine that achieves high-speed and low-cost processing. 【What is a molybdenum wire EDM machine?】 - Uses wire made of "molybdenum steel," which is resistant to breakage and has excellent toughness. - Allows for processing using high-strength "molybdenum steel" wire in a repeated manner. - The processing fluid is a continuous flow type, designed for space-saving and energy efficiency. 【Features of the HB series】 - Capable of handling materials up to a maximum thickness of 800 mm. - Seamlessly transitions from drawing to processing. - Processing accuracy of ±0.01 mm. - Accommodates complex shapes. Currently, factories overseas are achieving automation through wire cutting by combining it with robots.

Company：大野精工機工販売事業部
Price：5 million yen-10 million yen

Electric discharge machine
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Circular Saw Cutting Machine (TCT Saw/Metal Saw) Product Catalog

Free catalog featuring metal saw cutting machines and combined cutting machines for chip saws and metal saws!

This catalog features the circular saw cutting machines (chip saws/metal saws) handled by Tanitech. It includes the "TMC Metal Saw Automatic Cutting Machine Series" for wet cutting of metals such as pipes, structural steel, and round corner bars, as well as lineups like "Hydraulic Automatic Cutting Machines" and "Automatic Cutting Machines for Bars and Pipes." Please use this for selecting products. [Contents (excerpt)] ■ TMC Metal Saw Automatic Cutting Machine Series ■ TMC Metal Saw Manual Cutting Machine Series ■ Hydraulic Automatic Cutting Machines ■ Automatic Cutting Machines for Bars and Pipes ■ Ultra-High-Speed Automatic Cutting Machines for Pipes *For more details, please refer to the PDF materials or feel free to contact us.

Company：谷テック大阪支店
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pipe Chamfering Machine Product Catalog

A wide variety of long and short types of semi-automatic edge trimming machines and fully automatic double-sided edge trimming machines are featured!

This catalog features a variety of pipe beveling machines handled by Tanitech Co., Ltd. Included in the lineup is the "Semi-Automatic Beveling Machine," which can simultaneously bevel the inner, outer, and end surfaces of pipes, as well as the "Fully Automatic Dual-End Beveling Machine (Long Type)," which can process the inner, outer, and end surfaces of both ends of pipes up to a maximum length of 3000mm. Please use this information to assist in selecting products. [Contents] ■ Semi-Automatic Beveling Machine ■ Fully Automatic Dual-End Beveling Machine (Long Type) ■ Fully Automatic Dual-End Beveling Machine (Short Type) *For more details, please refer to the PDF materials or feel free to contact us.

Company：谷テック大阪支店
Price：Other

Other processing machines
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting Machine "TMC Metal Saw Manual Cutting Machine"

For cutting metals such as pipes, shaped steel, and round corner bars! A popular cutting machine that operates entirely manually.

The "TMC Metal Saw Manual Cutting Machine" is a popular wet-type metal cutting machine used for cutting metals such as pipes, shape steel, and round square bars. All cutting operations are manual, making it efficient when dealing with a variety of workpieces and a low number of cuts. We offer two types of metal saws with different sizes: "TMC-315F" and "TMC-370F." 【Features】 ■ All cutting operations are manual ■ Efficient for a variety of workpieces with a low number of cuts ■ Two types of metal saws with different sizes available ■ Metal saw specifications - TMC-315F: φ315 - TMC-370F: φ370 *For more details, please refer to the PDF document or feel free to contact us.

Company：谷テック大阪支店
Price：Other

Other processing machines
cutter
Other cutting tools
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting Machine "TMC Metal Saw Automatic Cutting Machine"

The entire cycle from clamping to cutting is automatic! This cutting machine is perfect for mass production tasks.

The "TMC Metal Saw Automatic Cutting Machine" is a wet cutting machine suitable for cutting metals such as pipes, shaped steel, and round square bars. It automatically operates from clamping to cutting in one cycle (compressed air is required), ensuring stable cutting speed and improved cutting life. It allows for the selection of an appropriate rotation speed for the cutting material with a two-stage switching rotation speed. 【Features】 ■ Automatic operation from clamping to cutting in one cycle ■ Stable cutting speed improves cutting life ■ Two-stage switching rotation speed ■ The material's pass line is always constant (centered double vice) ■ When cutting at an angle, cutting materials can be clamped on both sides of the metal saw (material side and scrap side) *For more details, please refer to the PDF document or feel free to contact us.

Company：谷テック大阪支店
Price：Other

Other processing machines
cutter
Other cutting tools
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting machine "iCUT PRO" *Test cuts now being accepted

A user-friendly and efficient cutting machine designed by incorporating feedback from the field!

The "iCUT PRO" is a cutting machine that achieves remarkably smooth cutting edges from paper to metal without the need for clearance adjustments. Since it does not require a sheet holder during normal cutting with shearing, it reduces work time and increases efficiency. Additionally, it is equipped with safety features that engage an interlock when the cover is removed. 【Features】 ■ No need for clearance adjustments based on sheet thickness ■ Peace of mind while working with visual confirmation ■ No sheet holder required during normal cutting ■ Approximately three times the blade life of conventional products, outstanding durability *This product is a custom-made item. Due to the nature of the product, it may take some time to respond depending on the timing and circumstances. *For more details, please download the PDF or feel free to contact us.

Company：エムエスシー製造
Price：Other

Plastic processing machines (cutting and rolling)
Other processing machines
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Systec Co., Ltd. Business Introduction

A comprehensive system equipment manufacturer from design to production and construction.

At Systec Co., Ltd., we mainly engage in the design and manufacturing of FA equipment, conveyor machinery, and various system designs. Our main product groups include automated production lines related to manufacturing and various conveyor line equipment, with a strong track record in various labor-saving automatic machines. Additionally, we have received positive feedback for various industrial furnaces, including drying ovens. Please feel free to contact us if you have any inquiries. 【Business Activities】 ■ General industrial machinery, automation machinery, labor-saving machinery, conveyor plants, various heat treatment furnaces, renovation and improvement of existing equipment, and various designs, etc. *For more details, please download the PDF or contact us.

Company：システック
Price：Other

Mechanical Design
Contract manufacturing
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Material cutting machine

A professional group of custom cutting machine experts.

"Sharp! Fast! Easy!" This is a popular cutting machine that combines all three features. Custom orders are available, so please contact us.

Company：メカテック　
Price：Other

Other machine tools
aluminum
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic cutting line, cutting machine

Automatic cutting line, cutting machine! No matter how high-speed it is, if it's not a cutting machine that considers the lifespan of the blade, the running costs will be significant. Please contact us. You can utilize the technical expertise of major manufacturers at a low cost.

Company：メカテック　
Price：Other

Other processing machines
Other cutting tools
Other Auto Parts
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FA Factory Automation Case: [Semi-Automatic] Resin Board Cutting Machine

Equipped with two chip saws! Each can be adjusted for angle and width with handle operation! We also accept design proposals for lines!

This product is a semi-automatic cutting machine that cuts resin boards into various shapes. Place the product on the table and press the start switch for automatic cutting. It is equipped with two circular saw blades, and the angle and width can be adjusted manually with handles. The cut workpieces are discharged from the rear chute. We offer cutting methods and automation proposals tailored to the nature of the workpieces and production volume. We can accommodate a wide range of budgets. 【Specifications】 ■Workpiece: Resin board ■CT: 8 seconds per cut *For more details, please refer to the PDF document or feel free to contact us.

Company：メカテック　
Price：Other

Plastic processing machines (cutting and rolling)
Other processing machines
Resin processing machine
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

System 1311 die holder

It is applied when crimping copper connections with cable sizes of 10-400mm² using System 1311!

We only handle the "System 1311 Die Holder" that is required for dies containing "13" in the model number. For the V1311 tool, both the internal die holder "V1316" and the external die holder "V1318" are necessary. Compatible tools are the "V1311-A Hydraulic Crimping Tool" and the "PVL 1300 Crimping Pliers (Battery Operated)." 【Product Overview】 ■ Advantages: For the V1311 tool, both the internal die holder "V1316" and the external die holder "V1318" are required. ■ Note: Required only for dies containing "13" in the model number. ■ Compatible tools: V1311-A Hydraulic Crimping Tool / PVL 1300 Crimping Pliers *For more details, please refer to the PDF document or feel free to contact us.

Company：Lapp Japan
Price：Other

Other work tools
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small Precision Cutting Machine "Refine Saw Excel Series"

An ideal compact precision cutting machine that can flexibly respond to a wide range of needs up to high-speed rotation.

The "Refine So Excel Series" is a compact precision cutting machine that minimizes cutting distortion and allows for rapid cutting of ceramics with low-speed rotation of the cutting wheel. We offer models such as the manual feed cutter "RCB-951" and the three-dimensional cutting machine "RCB-971," which features vertical feed and functions for thin slicing and angled cutting. 【Features】 ■ Precision slide mechanism for horizontal feeding ■ Double vice with horizontal feeding device ■ Comes standard with a diamond wheel or borazon wheel, but thin cutting stones can also be used. *For more details, please download the PDF or feel free to contact us.

Company：リファインテック本社・工場
Price：Other

Plastic processing machines (cutting and rolling)
Other physicochemical equipment
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Aluminum Frame Cutting Machine

Reduce material waste and cut costs! It is now possible to operate by cutting only the necessary amount.

In our company, we have developed our own aluminum frame cutting machine to improve the efficiency of the processing process and enhance quality, which has been introduced for in-house processing. The cutting machine we have introduced uses a circular saw (chip saw). This choice has resulted in a significantly cleaner cutting surface compared to the conventional band saw. As a result, the finishing process that was previously necessary before assembly has become unnecessary, greatly improving work efficiency. 【Case Overview】 ■ Background of Introduction: Efficiency improvement and quality enhancement in the processing process ■ Features of the Equipment - The adoption of a circular saw (chip saw) has resulted in a very clean cutting surface. - The finishing process that was previously required before assembly is no longer necessary, leading to a significant improvement in work efficiency. *For more details, please refer to the related links or feel free to contact us.

Company：小川製作所
Price：Other

Plastic processing machines (cutting and rolling)
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Hydrocut Introduction Case Study] Steel and Demolition Industry

Hydrocut, which has less backfire compared to acetylene! An example of improved quality on the cutting surface.

We would like to introduce a case study of the implementation of "Hydrocut" for our customers in the steel fabrication and demolition industry. The situation was that "work was interrupted due to backfire, so we wanted to improve workability" and "we wanted to enhance the quality of the cut surface." After introducing Hydrocut, which excels in heat concentration and is expected to improve the quality of the cut surface, we found that the occurrence of backfire decreased, leading to improved cutting efficiency for materials like galvanized steel plates that had been troubled by backfire. The distortion during cutting was also reduced. 【Overview】 ■ Challenges - Work was interrupted due to backfire, so we wanted to improve workability. - We wanted to enhance the quality of the cut surface. ■ Results - With the decrease in backfire, the cutting efficiency of materials like galvanized steel plates, which had been troubled by backfire, improved. - The distortion during cutting was reduced, and the quality of the cut surface improved. *For more details, please refer to the PDF document or feel free to contact us.

Company：東日本イワタニガス開発本部
Price：Other

others
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting Machine "HP-BR35"

Compatible with carbon fiber, aramid, Kevlar, and other fibers! Contributes to production improvement and work rationalization.

We would like to introduce our cutting machine, the 'HP-BR35'. After numerous improvements, it is compact and contributes to increased production and work efficiency. It can cut various types of fibers including carbon fiber, aramid, Kevlar, carpet, nylon, vinyl sheets, and felt. Tsuji Iron Works manufactures a variety of cutting machines. Please feel free to consult us when needed. 【Features】 ■ Compact design that contributes to increased production and work efficiency ■ Compatible with carbon fiber, aramid, Kevlar, carpet, nylon, vinyl sheets, and felt *For more details, please refer to the PDF document or feel free to contact us.

Company：辻鉄工所
Price：Other

Plastic processing machines (cutting and rolling)
Other machine tools
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting Machine 'HP-300/HP-500/HP-600'

Using our specially made special steel! It has a small installation area, and exchanging and adjusting with spare blades is also easy.

We would like to introduce our cutting machines 'HP-300/HP-500/HP-600'. The blades are made from our specially crafted high-strength steel, offering exceptional durability, and the exchange and adjustment with spare blades is easy. The machines are robust, require minimal maintenance costs, and have excellent cutting capabilities with a small footprint. They can cut various fibers such as cotton, synthetic fibers, blended fibers, hemp, and wool with precision, and can easily adjust to cut materials like rags and ropes to the desired dimensions. 【Features】 ■ Easy operation and handling ■ Extremely durable blades ■ Simple exchange and adjustment with spare blades ■ Robust with minimal maintenance costs ■ Small installation area ■ Blades made from our specially crafted high-strength steel *For more details, please refer to the PDF document or feel free to contact us.

Company：辻鉄工所
Price：Other

Plastic processing machines (cutting and rolling)
Other machine tools
Textile Processing Machinery
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Design considering operability! Electric stage for microscopes

Pursuing ease of use and performance! Introducing electric stages for upright and inverted microscopes.

We would like to introduce our "Electric Stages." The "H101 Series" is an electric stage for upright microscopes, representing the high-precision ProScan III. You can choose the appropriate specifications based on the presence of an encoder, ball screw, and motor step count. The "H117 Series" is an electric stage for inverted microscopes, designed with ease of use and performance in mind. The stage features a flat design for better operability. 【Features】 <H101 Series> ■ For upright microscopes ■ Specifications can be selected based on the presence of an encoder, ball screw, and motor step count <H117 Series> ■ For inverted microscopes ■ Designed with operability in mind, featuring a flat stage * We also offer stages with higher precision and speed linear drive. * For more details, please refer to the PDF materials or feel free to contact us.

Company：プライアー・サイエンティフィック
Price：Other

others
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Central Chemical Co., Ltd. Business Introduction

Leave it to us for chemical machinery, including drying equipment and automation machines.

Our company utilizes years of experience to focus on the development of drying equipment and heat treatment equipment. We design and manufacture various machines and tools in our research and development department, and we also provide products that meet all needs, from the design and manufacturing of labor-saving and automation equipment to installation in the manufacturing department. In particular, our heat treatment equipment adopts a uniform heat air circulation method with high temperature distribution accuracy, leveraging our extensive experience and achievements. Additionally, we are engaged in the development of various conveyor-type heat treatment furnaces that support automation and labor-saving, as well as equipment required to meet explosion-proof standards for applications such as painting and adhesive drying. 【Business Overview】 ■ Drying Equipment ■ Liquid Tank Equipment ■ Tank Equipment ■ Testing Machines ■ Conveyor Equipment, etc. *For more details, please download the PDF or contact us.

Company：中央理化機
Price：Other

Machinery and equipment installation/dismantling/relocation
Mechanical Design
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction of production achievements of die holders using the new material "Hi-Duc".

The production record of die holders made by "Hi-Duc2" averages 152 units per year! With a wealth of experience, we propose high-quality die holders.

Our brand "Hi-Duc/Hi-Duc2" has been developed as a "material suitable for large thick-walled die molds" for large die-casting molds, and particularly "Hi-Duc2" possesses strength comparable to cast steel despite being a casting, thanks to improvements in graphite particle size and the addition of special elements. The production record of die holders using "Hi-Duc2" (aggregated over the past 12 years) is an average of 152 units (76 sets) per year. This means we produce 6 to 7 sets per month, ranging from large to small. Additionally, the production record of die holders using "Hi-Duc" is an average of 938 units (469 sets) per year, with a production pace of about 40 sets per month. Our company has extensive production experience and know-how in die holders, enabling us to provide high-quality products using "Hi-Duc/Hi-Duc2." *For more details about this material, please download and view the catalog.

Company：スギヤマ本社
Price：Other

Mold Design
Other molds
Cutting Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cutting Machine Product List and Ranking from 346 Manufacturers, Suppliers and Companies | IPROS GMS

Cutting Machine Manufacturer, Suppliers and Company Rankings

Cutting Machine Product ranking