Disk Product List and Ranking from 50 Manufacturers, Suppliers and Companies

Method for setting rupture pressure

The pressure varies depending on the container used for installation! Leave the support for setting the appropriate burst pressure to us.

The setting of the burst pressure is a very important point for rupture disks, but how should one decide on the pressure to set? From a safety perspective, it is desirable to set the pressure that causes the rupture disk to burst as low as possible. On the other hand, it is generally more effective for the lifespan of the product to set the operating pressure higher, creating a larger difference from the set pressure. Therefore, considering the difference between the burst pressure and the operating pressure, as well as the allowable tolerance of the rupture disk, the specific pressure is determined based on the design pressure of the container in which it will be installed. In cases where the pressure vessel structural standards or the High-Pressure Gas Safety Act apply, the settings will be made in accordance with the applicable regulations. *For more details, please refer to the PDF document or feel free to contact us.

Company：ファイク・ジャパン
Price：Other

Piping Materials
Other machine elements
Other safety equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ozone disk

Easily converts tap water into ozone water using USB power.

Specifications: Size 5.5 cm x 1.5 cm Power supply: USB Features: * Generates ozone water from tap water * Can use rechargeable batteries from mobile devices due to USB power supply (ideal for portability)

Company：エムジー技術研究所
Price：10,000 yen-100,000 yen

Other cleaning machines
Disk

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bursting disc, rupture disc, low, medium, and high pressure types.

Are you facing challenges with pressure control in high-pressure piping, tanks, and containers? The solution might be a rupture disc!

ZOOK is a global market leader that has been manufacturing high-quality metal and graphite rupture disks and other pressure relief products for over 90 years. 【Quality Policy】 ZOOK's quality policy is to exceed customer expectations by meeting requirements through timely delivery, efficient and courteous customer service, and products of excellent quality and reliability, while continuously improving the quality management system. <Certifications and Standards> - PED CE (European Pressure Equipment Directive) - ASME VIII - TUV ADM (TUV Certified) - KOSHA ★ Four global offices ★ Agents in over 70 countries ★ ZOOK products sold in over 65 countries ★ Over 5,000 customers worldwide, with a growing customer base For more details, please contact us or download the catalog.

Company：ジャパンコントロールス「Japan Controls Co. Ltd.」東京本社
Price：Other

Other safety equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bridge breaker, bro disk

Easily solve powder bridges that cannot be resolved with knockers or vibrators. No more expensive equipment is necessary.

**Key Points of This Equipment** - The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign matter contamination. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! - Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. Easily fluidize powder and granular materials with the combined effects of wall aeration and vibration. Free rental campaign currently underway.

Company：ミナギ
Price：Other

Other powder equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of the bridge in the resin and filler mixture.

Easily solve blips and rat holes with air injection into the hopper and the vibration of the silicone disk!

We would like to introduce a case where we implemented measures against bridging in the hopper of a quantitative feeder (screw feeder). Bridging occurred due to the type of material, and although we tried to address it with hammering, it only made the situation worse. Dimensionally, two standard Brodie disks (one at each discharge area of 300) were sufficient, but to prevent adhesion near the discharge area, we also installed one mini Brodie disk at the discharge area of 150. 【Device Overview】 ■ Hopper Diameter: 700Φ ■ Discharge Area Dimensions: 300×150 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disks in this equipment are exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us. *Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0456 Powder coating rat hole, using EPDM discs.

We also accept inquiries about elastic disk materials, so please feel free to contact us!

This is an introduction to a case where the Brody Disk Mini was used as a solution for the strong adhesion of powder coatings at a powder equipment manufacturer. Based on the results of preliminary tests, we installed a total of 6 units: 2 on the lower section (near the discharge area) and 4 on the upper section. The main component of this device, the elastic disk, is made of silicone (special silicone) in standard models; however, in this case, we used EPDM material due to the nature of the substance being powder coating. [Case Overview] ■ Arrangement - 2 units on the lower section (near the discharge area) - 4 units on the upper section ■ Product Specifications - Brody Disk Mini BD-08S-EW *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be accessed via the link below.

Company：ミナギ
Price：Other

Other processing machines
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0531 Prevention of adhesion of urethane pellets

To prevent adhesion, it is effective to spray air at high pressure! Here are examples of the installation of blow discs.

We received a new inquiry from a rubber product manufacturer who adopted our equipment a long time ago. In the previous project, they used the Brodie Disk Mini to prevent fine powder bridging, and it was well received. Although quite some time has passed since then, it seems they have been using the elastic disks (silicone disks) stably without any degradation or damage. This time, they consulted us because the material tends to stick to the inner surface of the hopper, and they wanted to find a solution. The effectiveness of our equipment depends on the degree of sticking (adhesion), so we first installed one Brodie Disk (standard type) on just one surface, which yielded very good results. Based on the test results, it was decided to install them on each surface. 【Overview】 ■ Material: Urethane pellets ■ Hopper dimensions: 450×450 ■ Discharge section dimensions: 100×100 ■ Transport: Blower ■ Control: To prevent adhesion, it is effective to inject air at high pressure, so the operating air pressure is set higher, and four Brodie Disks are activated one by one with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0534 Preventing bridging of particles approximately a few mm in size [rectangular prism]

Bridge measures at the hopper discharge section! Introducing a case study of the delivery of a blow disc.

We have delivered to a chemical manufacturer. This is a solution for bridging at the hopper discharge section. In addition to providing guidance on the arrangement of this equipment, we also offer advice regarding usage conditions. We believe we can provide suitable implementation plans that match the conditions of each user. Please feel free to contact us when you need assistance. 【Overview】 ■ Hopper dimensions: 1000×1000 ■ Discharge section: 150A ■ Overview of target material: (Particle size) 1-5mm / (Shape) close to rectangular prism / (Specific gravity) approximately 1.0 ■ Arrangement of this equipment: One blow disk installed in the flat area near the discharge section, totaling four units ■ Operation of this equipment: - A controller with four built-in solenoid valves operates the four blow disks, turning on air one by one with a time delay. - The air pressure for this application is set higher, and the air ON time is short. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of residue in the hopper of LDPE crushed material.

Cost-focused control! Introducing a case that eliminated rat-hole residuals.

After installing a magnet bar to remove metal foreign objects, material began to remain in a rat hole shape at the upper part. We received an inquiry about wanting to address this with a blow disk. We installed four blow disks (standard type BD-15) at the same height on the upper half of the conical section, which resolved the rat hole-shaped residue that was occurring from the conical section to the cylindrical section. There is also the option of turning on the blow disks one by one with a time delay, but since this case is not highly complex, we are focusing on cost-effective control. 【Case Overview】 ■ Residue Situation - Rat holes occurred from the upper half of the conical section of the magnet bar installed in the lower half of the conical section of an Φ800 hopper to the cylindrical section. - The target material is low-density polyethylene granulate. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0622 Scale-up project (metal oxides)

We will introduce a case where control sequentially turned on the air for 8 blow discs in pairs with a time difference!

We would like to introduce a case where customers who are already using our equipment have adopted the BroaDisk during the scale-up of their facilities. The control was scaled up from turning all three BroaDisks ON/OFF simultaneously to sequentially turning ON eight BroaDisks in pairs with a time delay. Our company has accumulated various experiences, so we can inform you of the models, arrangements, and controls suitable for your conditions. 【Target Material】 ■ Name: Metal Oxide ■ Particle Size: Approximately 10 microns on average ■ Specific Gravity: Loose 2, Firm 3 ■ Angle of Repose: Over 50° 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. Our silicone disks are exceptionally strong and durable. Once you use them, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *Details of the case can be viewed through the related links.

Company：ミナギ
Price：Other

Other powder equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0681 Elastic disk: Supplied by Baiton

Introducing examples of bridge measures adopted with a small hopper!

We would like to introduce a case study of our "Brodisk Mini" installation. Our product was adopted as a solution for bridging in a small hopper. In this case, the material of the elastic disk was changed from the standard (i.e., special silicone) to Viton. Additionally, it is also possible to change the material of the elastic disk for the Brodisk to Viton. 【Case Overview】 ■ Hopper Diameter: Φ300 ■ Outlet Diameter: Φ50 ■ Hopper Inclination: Approximately 60° ■ Contents: Name undisclosed (flowability similar to talc) *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Waterproof sheet separate attachment method: Disk for fixing waterproof sheet

The adhesive on the disk surface melts and integrates with the waterproof sheet material! Introducing the disk for fixing waterproof sheets.

The "Waterproof Sheet Fixing Disk" can be installed with a separate backing material (non-woven fabric) and waterproof sheet material (EVA). By interfering with the fixing disk, securing the backing drainage material with nails, and using an electromagnetic induction heating device to heat the disk from the surface of the waterproof sheet material, the adhesive on the disk surface melts and integrates with the waterproof sheet material. A special heating sheet is laminated on the resin disk body, and since the nail driving part is recessed, there is no risk of damaging the waterproof sheet material due to the nail head. 【Features】 ■ Dimensions: 94mm square / Total height: 14mm ■ A special heating sheet is laminated on the resin disk body ■ The square shape design makes it easy to secure the bonding area even if the heating position is misaligned ■ The recessed nail driving part eliminates the risk of damaging the waterproof sheet material due to the nail head *For more details, please refer to the PDF document or feel free to contact us.

Company：フジモリ産業
Price：Other

others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

APRO Corporation USB Flash Drive

High reliability, wide temperature range, SLC-NAND USB flash disk

High-reliability USB flash disk using SLC-NAND.

Company：アスコット
Price：Other

Other electronic parts
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Caliper Brake ASAHI Caliper Dedicated Disc / Asahi Seiko

The "BMK-D type" caliper brake is a disc specifically for ASAHI calipers.

Asahi Precision Engineering "Caliper Brake BMK-D Type (Dedicated Disc for ASAHI Calipers)" * The "BMK-D Type" is a disc specifically for ASAHI calipers. ■ Specifications Material: FC250 Surface Roughness: Ra1.6(6.35) Thickness: 6 mm ■ Lineup ● BMK-D-150 ... Disc Diameter: Φ150 / Inner Diameter Dimensions: Φ25, 30, 35 ● BMK-D-250 ... Disc Diameter: Φ250 / Inner Diameter Dimensions: Φ40, 45, 50, 55, 60 * For more details, please refer to the catalog or feel free to contact us.

Company：タツタ
Price：Other

brake
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rejibon Mini Disc "MD-58"

We offer granularity of 60, 80, 100, 120, and 240! Use the top, bottom, and sides to improve work efficiency!

The "MD-58" is a mini flap disc for the Redibon air grinder. By enabling grinding and polishing on the top, bottom, and sides, it improves work efficiency. With a compact outer diameter of 58mm, it is suitable for small burr removal, chamfering, and finishing, and can grind into narrow areas. 【Features】 ■ 3WAY DISC (top, bottom, side) ■ Improved work efficiency ■ Compact and capable of grinding in narrow areas ■ Size (outer diameter × hole diameter): 58×9.6 ■ Maximum operating speed: 19,750 min-1 *For more details, please refer to the PDF document or feel free to contact us.

Company：日本レヂボン
Price：Other

Other abrasives
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass Cross Disk "Spider Net SPN"

Keep a flat polish.

"Spider Net" is a glass cloth disc suitable for flat grinding. 【Features】 ■ Maintains shape during continuous grinding, allowing for sustained surface grinding ■ Enables burn removal and flat finishing without digging into steel materials ■ Can grind in pinpoint or wide areas with two types of pads ■ Easy to attach and detach! *For more details, please refer to the PDF document or feel free to contact us.

Company：日本レヂボン
Price：Other

Grindstone
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Phthalate-free quartz disc

Recommended for phthalate ester analysis! Prevents the scattering of solid samples during the introduction of sample cups.

The "Phthalate-Free Quartz Disk" prevents the scattering of powdered samples during the introduction and collection of sample cups when using an auto-shot sampler by placing it on top of the powdered sample in the sample cup. The level of phthalate ester content is so low that it can be ignored, allowing for the classification of phthalate esters without concern for contamination. 【Features】 ■ Ultra-clean quartz disk, ready to use immediately ■ Significantly reduces working time compared to filling with quartz wool ■ Comes with a concentration inspection certificate for seven types of phthalate esters *For more details, please download the PDF or feel free to contact us.

Company：フロンティア・ラボ
Price：Other

Other safety and protection products
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Diamond disk

Diamond discs suitable for processing non-ferrous metals and non-metal materials!

Our company offers "diamond discs" suitable for cutting and grooving processing. With a flat outer circumference, chipping is minimal, resulting in smooth cuts. 【Main materials to be processed】 ■ Ceramics ■ Glass ■ Stone ■ Semiconductor materials ■ FRP *For more details, please download the PDF or feel free to contact us.

Company：永興電機工業
Price：Other

Other cutting tools
Other machine elements
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flap Disc "Gachi Sera PRO"

The difference is in the ceramic abrasive particles. They wear down while maintaining a sharp shape compared to alumina abrasive particles.

"GaChiSera PRO" is a flap disc that uses ceramic as the abrasive material. Ceramic abrasives wear down while maintaining a sharp shape compared to alumina abrasives. Therefore, they maintain high grinding and polishing power for a longer period. We offer four grit sizes: #36, #60, #80, and #120. For more details, please contact us. [Product Lineup] ■CM-100-36 ■CM-100-60 ■CM-100-80 ■CM-100-120 *For more details, please refer to the PDF document or feel free to contact us.

Company：モトユキ
Price：Other

Plastic processing machines (cutting and rolling)
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Grinding Disk "Nylon Non-Woven Abrasive Disk"

An offset-type finishing disc made of layered nylon fibers with abrasive particles!

The "Nylon Non-Woven Abrasive Disc" is a polishing disc that excels in flexibility and fits both flat and curved surfaces for polishing finishes. It does not leave deep scratches on the work surface and allows for a soft finish. It can be used for removing rust from various metals, finishing before painting, correcting and blurring scratches, cleaning dirt, and removing discoloration after welding. Additionally, it can also be used for finishing wood and other materials. 【Features】 ■ Offset type ■ Excellent flexibility ■ No clogging and minimal heat generation on the work surface ■ Soft finish ■ Wide range of applications *For more details, please refer to the catalog or feel free to contact us.

Company：菅沼砥石製作所
Price：Other

Grindstone
Other abrasives
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Resinoid Grinding Stone Series "Nylon Non-Woven Abrasive Disc"

Flexibility that fits even curved surfaces! Offset type with layered abrasive nylon fibers.

The "Nylon Non-Woven Abrasive Disc" is an offset-type finishing disc made of layered nylon fibers with abrasive particles. It offers excellent flexibility, allowing for polishing finishes that fit both flat and curved surfaces. Additionally, it does not clog, generates minimal heat on the work surface, and is highly durable. It can be used for rust removal from various metals, finishing before painting, as well as for finishing wood. 【Features】 - Does not leave deep scratches on the work surface, allowing for a soft finish - Excellent flexibility that fits flat and curved surfaces - No clogging and minimal heat generation on the work surface - Highly durable - Usable for finishing not only metals but also wood *For more details, please refer to the catalog or feel free to contact us.

Company：菅沼砥石製作所
Price：Other

Grindstone
Other abrasives
Other cutting tools
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SUN UP Mini Super Drill King 3 55mm for drill presses and electric drills.

Sun Up Mini Super Research King 3 55mm

For drill presses and electric drills 【Features】 ■ Nuts can be removed for front and back replacement ■ Double-sided type: Front - coarse #150, Back - fine #400 ■ Diameter: 55mm ■ For polishing grass cutting saw blades, grass cutting sickles, hardened steel, glass, etc. Part number: 31354 *For more details, please feel free to contact us.

Company：コンヨ本社
Price：Other

Other work tools
Disk

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for Flexible Diamond Discs

Utilize the flexibility of poly diamond to blend! Proposal for abrasive materials!

We propose grinding materials for machine tools that can be utilized in the manufacturing industry. The diamond disc, which firmly integrates diamond abrasive grains with polyimide resin, can be used to grind and widen the adjacent surfaces, cutting edges, and tooth necks of bridges by utilizing the flexibility of poly-diamond. Additionally, since there are diamond abrasive grains on both sides, it can be used for push grinding or pull grinding according to preference. 【Features】 ■ Firm integration of diamond abrasive grains with polyimide resin ■ Cutting of adjacent surfaces, cutting edges, and tooth necks of bridges ■ Usable for push grinding or pull grinding according to preference *For more details, please refer to the PDF document or feel free to contact us.

Company：マシンツール中央
Price：Other

Diamond cutter
Other abrasives
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Relief | UKB-LS Type Rupture Disk

Helium leak tested high airtightness rupture disk.

The UKB LS consists of a customizable housing, an inverted rupture disk, and a three-section knife. When the specified burst pressure is reached, the rupture disk bursts open towards the knife. This design allows for the lowest burst pressure while also enabling high vacuum conditions. The rupture disk and housing are micro-welded, and all components are made of metal, ensuring maximum airtightness. A maximum leakage rate of 10^-10 is achievable. With various types of connections available, we provide pressure relief units that perfectly fit any application, including high-purity processes. Despite the numerous variations, several "standard" sizes have been established over the past few decades for installation between commercially available flanges.

Company：REMBE
Price：Other

Other machine elements
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Relief | KUB V-Type Rupture Disk

High airtightness and a design that is difficult to leak! A suitable inverted rupture disk for isolating safety valves.

The "KUB V-type" protects safety valves from corrosive or sticky process media by installing a rupture disk before the inlet of the safety valve. It has been certified for durability against back pressure of up to 135% of the specified burst pressure (*), and it allows for safety valve testing on-site without the need for removal for maintenance. During normal operation, the safety valve is isolated from the process media, allowing for the use of safety valves made from inexpensive materials. 【Features】 ■ Extended lifespan of safety valves and longer intervals between after-service ■ Reduced maintenance inspection costs for safety valves ■ Use of safety valves made from inexpensive materials is possible ■ High airtightness and a design that minimizes leakage * This varies depending on each application. * For more details, please refer to the PDF materials or feel free to contact us.

Company：REMBE
Price：Other

Other machine elements
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure relief | IKB type inverted rupture disk

Minimization of downtime and exceptional performance through advanced CPL technology.

The IKB type is a cost-effective inverted rupture disk suitable for various applications and a wide range of processes. It provides diverse solutions tailored to the needs of the entire plant. The IKB type rupture disk is specially designed to protect pressure vessels, piping systems, gas cylinders, reactors, and more from overpressure. The IKB type is a unique inverted rupture disk manufactured using REMBE's proprietary "Contour Precision Laser Ring (CPL) technology." This technology ensures the highest quality and precise burst operation control even under the most extreme environmental conditions. The IKB type features precision sublimation processing that does not affect the crystalline structure of the material, resulting in a disk design with no fragment dispersion at the full bore opening. It has a 95%* operating pressure ratio, excelling in harsh high-cycle applications and enabling the longevity of the plant. *May vary depending on the application.

Company：REMBE
Price：Other

Other machine elements
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Relief | STAR Type Tensile Rupture Disk

Low rupture height and high performance.

The STAR type is a high-performance tensile rupture disk with a low burst height, robust design, and a unique star-shaped opening pattern in a three-layer structure. The STAR type is suitable for low to high pressure and accommodates a wide range of processes. It meets the necessary processes in the oil and gas, chemical, and pharmaceutical industries, and its unique structure provides excellent performance and durability even in harsh operating environments where other types of rupture disks may burst prematurely. The STAR type has a long lifespan, minimizing the costs associated with replacements and downtime. 【Benefits of Use】 ★ Robust, low burst height design – Ensures excellent performance and long lifespan even under pressure cycling or vacuum conditions. ★ Excellent corrosion resistance and high cost-effectiveness – The rupture layer, which plays a critical role, does not come into contact with the process media, allowing for the use of various materials without affecting performance, leading to overall cost reduction. ★ Easy installation and reduced holder costs due to the unique star-shaped structure and low burst height design. ★ Minimal risk of fragment dispersion even under high burst pressure.

Company：REMBE
Price：Other

Other machine elements
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rupture disks that overcome common challenges in the industry.

Attention engineers and production managers in the oil, gas, chemical, and petrochemical fields! *White paper available for distribution.

Our company is a manufacturer of explosion protection and pressure relief products headquartered in Germany. Engineers in the oil, gas, chemical, and petrochemical sectors have relied on rupture discs for many years to quickly and reliably relieve unwanted and excessive pressure or vacuum within production processes. However, the early rupture discs were very simple, consisting of a flat metal piece installed between flanges that was weakened at a predetermined point using a mechanical scoring method (grooving) to open. Advancements in technology and design have dramatically improved quality and reliability, eliminating long-standing concerns such as pinholes, leaks, premature failures, and frequent replacements. *We are also offering a white paper in addition to our product catalog. The white paper discusses the challenges faced with rupture discs in the past and the current rupture discs that have resolved those issues. [Past Challenges] - Frequent leaks - Many premature failures (ruptures) - Need for frequent replacements

Company：REMBE
Price：Other

Pneumatic Equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Relief | GRX Type Graphite Rupture Disk

FDA-compliant pure graphite rupture disk

REMBE's unique graphite rupture disk is a product that boasts high performance and reliability characteristic of REMBE. It is designed to withstand highly corrosive media, low pressure, and high temperatures. All rupture disks manufactured by REMBE, including the graphite rupture disk, are made in Germany. The maximum operating pressure of the graphite rupture disk is 80% of the minimum burst pressure*. REMBE's graphite rupture disks are suitable for high temperatures due to a unique chemical vapor deposition method called "PyC coating (pyrolytic carbon)." They can operate under oxidizing and reducing atmospheres from -180 °C to +500 °C, and under inert conditions, they can withstand temperatures up to +1,500 °C. Even with the addition of vacuum support, the aforementioned operating conditions are maintained. Depending on the application and pipe nominal diameter, the rupture disk can be directly installed between flanges. It is also possible to incorporate a signaling device into existing control systems to notify of disk reactions. For burst pressures ranging from 20 mbarg to 63 barg, the pipe nominal diameter can accommodate from DN 15 to DN 600. *This may vary depending on the application.

Company：REMBE
Price：Other

Other machine elements
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pressure Relief | BT Type Rupture Disk

Long-selling classic Rapture Disc

This is a representative rupture disk developed several decades ago. Even today, this tension-type rupture disk is widely used in simple applications that handle medium to high pressure, such as pumps in the hydraulic, chemical, and petrochemical industries. The standard operating pressure ratio is 70%* of the minimum burst pressure. The burst pressure is determined by the thickness of the material and its tensile strength. It also accommodates the incorporation of a vacuum support layer with full vacuum resistance. 【Benefits of Use】 ★ Easy to use ★ Wide range of materials can be used *It may vary for special applications.

Company：REMBE
Price：Other

Other machine elements
others
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Disk Product List and Ranking from 50 Manufacturers, Suppliers and Companies | IPROS GMS

Disk Manufacturer, Suppliers and Company Rankings

Disk Product ranking