Disk Product List and Ranking from 50 Manufacturers, Suppliers and Companies

0537 Residual measures for the dust collector hopper section

Since configurations are important, we kindly ask customers who are interested to please consult with us, even if it may be a bit of a hassle!

A blower disk has been installed to prevent residuals that occur at the discharge bridge and in the four corners of the existing dust collector. This equipment has a simple structure, but it generally offers sufficient effectiveness. However, since the arrangement is important, we encourage interested customers to consult with us, even if it may be a bit of a hassle. We can provide specific advice. 【Product Specifications】 ■ Blower Disk: BD-15S-B, 8 pieces 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign matter contamination. The silicone disk in this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0547 Measures to prevent clogging of talc (discharge section φ50)

The blockage near the discharge section has been resolved! Please feel free to consult us about specific arrangements and controls.

You are already using BroaDisk in other material tanks. This was a consultation from a user. They requested, "The diameter of the hopper discharge section is small, causing bridging, so I would like to try the BroaDisk Mini and request to borrow the equipment." After discussing various conditions, we recommended the arrangement and quantity (4 BroaDisk Minis) and sent the equipment. As a result of the test, the clogging near the discharge section was resolved, but there were concerns about rat holes above that, and ultimately, 4 BroaDisk Minis were installed near the discharge section, with 2 BroaDisks placed above them. 【Product Specifications】 ■ BroaDisk: BD-15S-B 2 units ■ BroaDisk Mini: BD-08S-B 4 units ■ Controller: C-SV4 1 unit *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Increase the discharge speed from the silo.

There is a problem with the discharge speed! Here is an example where the discharge speed increased by 2.5 times after the introduction of the Brody disk.

We would like to introduce a case study regarding "Increasing the discharge speed from silos" handled by Minagi Co., Ltd. In the case of silos related to cement, although there were no issues with bridging or blockage, there were difficulties with the discharge speed, which led to a consultation. After reviewing the drawings and hearing about the current situation, we lent out a Brodie disk to confirm its effectiveness. The results were favorable, leading to its implementation, and the discharge speed increased by 2.5 times. [Case Summary] ■Challenge - Although there were no issues with bridging or blockage, there were difficulties with the discharge speed. ■Result - We lent out a Brodie disk to confirm its effectiveness, and after favorable results, it was implemented, increasing the discharge speed by 2.5 times. [Key Points of Our Equipment] ■The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ■Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0564 Installation on food additive containers

First, we installed it on one of the many containers! The bridge was resolved without any issues using a Brody disk.

The equipment was installed in a container for food additives (one of many). Although the interior was polished with a #400 buff to improve sliding, it was found that the bridge could not be eliminated, so it was first installed in one of the many containers. It was discovered that the bridge could be resolved without any issues using a blow disk, and subsequently, it has been installed in all of the many containers. [Container Overview] ■ Size: Approximately 1000×1000 ■ Discharge Section: Ø200 [Number of Blow Disks Installed] ■ Per Container: 4 units [Control] ■ Controlled by a C-SV4 controller with 4 built-in solenoid valves. Although there are many containers, since there is only one discharge station, one controller is sufficient. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improvement of the difficulty in discharging mixtures of seeds and fertilizers.

Guidance on compatible models and equipment layout! A rental test was conducted, and there are cases where the results were favorable leading to implementation.

We received an inquiry stating that the mixture of seeds and fertilizer cannot be discharged from the hopper due to being wet. We have not seen the actual item, but you sent us a hopper diagram, and we provided guidance on suitable models and equipment layout, and you conducted a test using our equipment. The results were favorable, leading to the decision to implement it. 【Hopper Overview】 ■ Hopper Diameter: Ø500 ■ Cone Section Inclination: Approximately 60° ■ Discharge Section: 65A piping (two locations at the bottom of the cone section) 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. Our silicone disk has excellent strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0570 Solving suction issues caused by resin chips/bridges

Installed and tested by the user! A case where this device solved the issue of being unable to perform suction transport.

This is an example of a solution provided by our equipment for a bridge formation in the hopper of crushed resin pellets, which prevents suction transport. The Brody Disk can be widely used to prevent clogging and bridging caused by materials such as powders, granules, pellets, and film crushings. 【Overview】 ■ Target Material - Pellets: Up to 8mm (often pointed) ■ Hopper - Size: 500×500 - Shape: 3 sides inclined, 1 side vertical - Discharge section: Suction from the horizontal bottom with Ø50 ■ Equipment Arrangement - A total of 3 units, one on each inclined surface (standard Brody Disk) ■ Introduction Flow - The user requests a loan of the equipment, installs the required quantity for testing - If results are satisfactory, the equipment, including the controller, is introduced *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0578 Measures for Hanging Storage of Incineration Ashes

Arranging 14 Brodisk BD-15S-B units! A case study targeting high-moisture incineration ash.

The measures for the shelf suspension of incineration ash have been adopted. We received contact from the customer stating, "The hopper's slope is 45° and is too gentle, causing bridging." As a countermeasure, they had already decided to modify the hopper (by adding steel plates to create a steep slope), but they also expressed a desire to add our equipment in line with this. Since it was mentioned that the incineration ash had a high moisture content, we provided a proposal for installation considering this. A total of 14 blow discs were arranged on the 2500 surface (2 surfaces). [Case Overview] ■ Hopper Size: Approximately 1500×2500 ■ Target Material: Incineration Ash (high moisture content) ■ Equipment Arrangement - Installed on the 2500 surface (2 surfaces) - 3 units on the lower level and 4 units on the upper level per surface / Total of 14 units arranged *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Vibration motor
Other contract services
Other machine elements
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the plant of the industrial waste disposal contractor.

Installed 12 Brodisk BD-15S-B units! Introducing a case that solved discharge troubles.

This is a case where a customer who installed our product in a cement silo a few years ago consulted us due to a discharge issue occurring at a different factory, leading to a repeat adoption. For specific layout and control examples, please inquire. Additionally, we can provide reasonable implementation proposals that take into account the contents and various conditions. Although the Brody disk is a simple device, the layout is important, so please feel free to consult us. 【Case Overview】 ■ Target Material: Fly Ash ■ Silo Overview - Diameter φ2000 - Discharge at φ400 in 2 locations * The upper part of the φ400 discharge outlet is vertical on one side and has a steep slope on the opposite side. ■ Installation Quantity: A relatively small number, with 12 units installed. * For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Vibration motor
Other contract services
Other machine elements
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Installed in the hopper for PVC powder.

The purpose is to ensure thoroughness, especially since it is not a case of concern regarding the bridge, so it is installed only near the discharge area!

This is an order received from a plant engineering company. The reasons for adopting the "Brodie Disk" include "the schedule is tight, so we want to be thorough" and "there are cost benefits." If you provide us with various conditions, we can guide you to suitable models and configurations that meet your objectives. Please feel free to contact us. We also accept phone inquiries. 【Adoption Overview】 ■ Hopper Size: 1200×1200 ■ Discharge Part Size: 150×150 ■ Contents: PVC powder ・ Particle Diameter - Average approximately 100μm ・ Bulk Density - Loose 0.5, Firm 0.6 ■ Equipment Configuration: One on each side (total of 4) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as strength and durability are crucial. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0600 At the biomass power generation plant

If you have had issues with other devices in the past or prioritize reliability, please give it a try!

The customer had previously experienced damage to their air aerator due to the contents becoming clumpy for another reason while using a different air aerator. It has been quite some time since you adopted the "Brodisk," and you have been using it smoothly without any issues. We believe that the elastic disk of this device is extremely excellent in terms of durability and strength. For those who have had problems with other devices in the past or customers who prioritize reliability, we encourage you to give it a try. In addition to lending out products, we can also provide sample pieces of the elastic disk. 【Usage Overview】 ■ Widely used in carbon silos, ash silos, etc. 【Key Points of This Device】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially from the perspective of foreign matter contamination risk. The silicone disk of this device is exceptionally strong and durable. We believe you will understand this once you use it! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller prepared.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0601 Attached to the hopper dryer

If you send us the hopper drawings, we can provide guidance on a reasonable layout, etc.!

We received a consultation from a customer stating, 'Occasionally, a bridge forms inside the hopper, making it impossible to transport.' First, they expressed a desire to see the 'broad disk,' so we promptly sent them the actual product for confirmation. After that, we inquired about their usage conditions and provided guidance on the model and configuration of our equipment, which they have since implemented, and the results have been favorable. [Summary of Conditions] ■ Target Material: Elastomer ■ Shape: Rounded Corner Pellets ■ Hopper Diameter: Φ600 ■ Lower Discharge Diameter: Φ100 [Key Points of Our Equipment] ■ The elastic disk (silicone) is very important in terms of the risk of foreign material contamination, as strength and durability are crucial. The silicone disk of our equipment excels in strength and durability. I believe you will understand this once you use it! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller prepared. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0608 Elimination of magnesium oxide bridging and adhesion.

Install a broad disk on each inclined surface to solve the bridge and adhesion issues.

This is an example where a bridge occurred in the cushion tank installed at the bottom of the dust collector, and this equipment was installed as a countermeasure. During the initial inquiry, there was a request to borrow this equipment, so we provided guidance on the placement along with the shipment of the equipment. Before the bridge occurred, there seemed to be adhesion on the inner surface of the hopper, but with the installation of the blow disk this time, the adhesion has been eliminated. 【Case Overview】 ■ Equipment Flow - Dust Collector → Rotary Valve → Target Hopper → Next Process ■ Target Hopper - Dimensions: 400×400 - Discharge Section: 100×100 * One side is vertical and three sides are inclined. 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, so strength and durability are crucial. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller prepared. * For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0609 Resolving compressed clogging

Affordable with good cost performance! Solve fine particle clogging with the Brodisk.

We would like to introduce an example of resolving powder clogging caused by long-term storage after feeding materials into the hopper. While the flowability is good shortly after feeding, the powder surface decreases over time, resulting in a significantly compacted state. After installing this equipment, discharge was smooth. We first lent out the actual product for confirmation, and it was immediately adopted. 【Case Overview】 ■ Contents: Chemicals (particle size is undisclosed, but very fine particles) ■ Hopper: Φ1000 ■ Discharge diameter: 125A ■ Configuration: 4 broad disks arranged in a staggered manner (2 each) ■ Control: Manual air ON during material discharge 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0610 Baking soda hopper / at the incinerator

Fluidize the powder with air injection along the inner surface of the hopper! The elastic disk offers reliable high durability.

We would like to introduce a case where our products were adopted in conjunction with the modification work of the incineration equipment. It seems that other exhaust gas treatment agents were originally used, but in line with the equipment modifications and changes in chemicals, measures for bridge and rat hole issues were implemented using the Brod disk. With the Brod disk, powder can be fluidized by air injection along the inner surface of the hopper, and it is possible to generate vibrations simultaneously with air aeration. 【Introduction Overview】 ■ Hopper Diameter: Φ2500 ■ Discharge Diameter: Φ250 ■ Target Material: Fine powdered sodium bicarbonate ■ Configuration: 4 Brod disks installed in 3 tiers, totaling 12 disks ■ Control: A controller (C-SV6) with 6 built-in solenoid valves sequentially turns on air for 2 Brod disks at a time with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0612 Preventing rat holes in high-viscosity fine powders

Easy to install and high cost performance! Brody Disk installation case study.

We would like to introduce a case where the rat hole phenomenon occurring in a hopper (with a steep incline) for highly viscous powder raw materials was resolved. Three standard Brody disks (BD-15) were installed at the same height in three tiers, totaling nine units. This equipment is easy to install and offers high cost performance, but the installation position is crucial. Please feel free to contact us when you need assistance. 【Case Overview】 ■ Equipment Flow - Raw material input via a flexible container → Raw material hopper (where the rat hole occurs) → Supplied to the next process via a rotary valve 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disks in this equipment are exceptionally strong and durable. We believe you will understand this once you use it! ■ Control (how to aerate?) is important! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Example of eliminating rat holes in resin micro powder (fluffy type)

Here is an example of a case where it is okay not to use the originally installed knocker!

We would like to introduce a case where we received an inquiry regarding the growth of adhesion in the hopper section of a dust collector, which was becoming rat-hole shaped, asking if there was any way to address this issue. The material in question has strong adhesion properties, and to prevent this adhesion from growing, we consulted on the arrangement of the blow discs and implemented the necessary changes. After implementation, the internal condition was checked through the bug flapper door, and it was confirmed that rat holes, as seen previously, were not occurring, resulting in a good outcome. 【Case Overview】 ■Objective - To prevent the growth of adhesion in the hopper section of the dust collector. ■Results - Rat holes, as seen previously, did not occur, resulting in a good outcome. - No issues arose from not using the originally installed knockers. 【Key Points of This Equipment】 ■The elastic discs (silicone) are very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone discs of this equipment are exceptionally strong and durable. Once you use them, you will understand! ■Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0620 Preventing bridging of defatted soybean flour

The modified hopper has been installed and is operating well! Here is a case where hammering has been eliminated.

Here is a case where we were consulted about wanting to introduce a Broa Disk in line with the modification of a defatted soybean hopper. The consultation involved the occurrence of bridging in the defatted soybean hopper, which required hammering each time, resulting in an uneven hopper. They wanted to introduce the "Broa Disk" to address the hopper modification. Our product was installed on the modified hopper, and thereafter, it was able to operate smoothly without the need for hammering. [Case Overview (Partial)] ■ Issue - Bridging occurs in the defatted soybean hopper, requiring hammering each time, causing the hopper to become uneven. ■ Proposal - We listened to the situation, reviewed the hopper diagram and samples, and provided guidance on models, layout, and control examples. - At the same time, we lent out a sample of the Broa Disk. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0649 Preventing bridge formation in the feed tank

Air ON with 8 Brodisks in pairs with a time difference! Introducing case studies.

We would like to introduce a case where our "Brodisk" and "Controller" were implemented to prevent bridging in a feed tank. We received a request from a customer who wanted to try the Brodisk immediately. They had seen the equipment at another company's factory and were informed by the factory representative that it was "effective." After confirming the effectiveness through manual aeration with a loaned Brodisk, the customer decided to implement our product. 【Case Overview】 ■ Installation Location: Tapered section with hopper diameter reduced from Ø1000 to Ø600 ■ Configuration: 4 units installed in 2 tiers (total of 8 units) ■ Contents: Wheat flour, fish meal, oil cake, bran, etc. ■ Control: Using the C-SV4 controller with 4 built-in solenoid valves to turn on air for 2 Brodisks at a time with a time delay. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Other powder equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0650 At the recycling plant (urethane)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

We would like to introduce a case where "Blow Disks" were implemented at a recycling plant. We received inquiries about measures to address bridging occurring in the hopper of the recycling plant, and this equipment was introduced. Four Blow Disks (standard type) were activated one by one at a relatively high air pressure. The controller used in this case is equipped with four solenoid valves. 【Case Overview】 ■ Installation Site: Recycling Plant ■ Products ・Blow Disk BD-15S-B x 4 ・Controller C-SV4 x 1 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disks in this equipment are exceptionally strong and durable. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Other powder equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0658 At the raw material hopper for thermosetting resin

Introducing a case where a total of 6 Brodisk Mini units were installed in 2 stages, with 3 units each.

We would like to introduce a case where a company manufacturing automotive parts adopted the "Blow Disk." They consulted us about frequent bridging in the raw material hopper and whether it could be resolved with the Blow Disk. After reviewing the situation photos and hopper drawings, we provided a proposal for the installation of the Blow Disk and offered a product loan for testing. Subsequently, without conducting an actual machine test, they confirmed the "air injection & vibration" through the physical equipment and decided to adopt it. 【Case Overview】 ■ Hopper Diameter: Ø400 ■ Discharge Diameter: Ø60 ■ Hopper Inclination: Approximately 40° ■ Material: Phenolic Resin 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. Our silicone disk has excellent strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Elimination of zinc oxide bridge and residue.

Bridge measures and residual measures for hopper corners! A case of repeat adoption.

We would like to introduce a case where our "Broad Disk" was adopted. "We installed the Broad Disk Mini in a small hopper (Ø300) and it performed exceptionally well, so we would like to resolve the discharge issues of another hopper with this device," was the consultation we received. Although the user already understood our device, the size of the hopper was completely different from the existing one, so after detailed discussions, they decided to adopt it again. 【Case Overview】 ■ Purpose: Bridge prevention & residual measures for the four corners of the hopper ■ Hopper Dimensions: 1000×1000 ■ Contents: Zinc oxide (particle size approximately 1-2 microns) 【Key Points of Our Device】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. Our silicone disk has excellent strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0673 Aeration of activated carbon storage tank

Introducing a case where a blow disk was adopted in conjunction with the overhaul of water treatment equipment.

We would like to introduce a case study of our "Brodisk" installation. The background is that the customer stated, "We are using a vibration discharge device and metal mesh aeration for bridge prevention in an existing silo, but the aeration is not effective," and they decided to replace it with our equipment. As a result, the customer requested that our device be positioned where the previous aeration was located. After confirming the details and determining that there were no issues, they proceeded with the installation. The equipment has been operating without any problems since then. 【Case Overview】 ■ Target Material: Wood-based powdered activated carbon (Density: approx. 0.4) ■ Configuration: A total of 6 units installed at 60° intervals on the upper hopper of the vibration discharge device, all on the same circumference. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0676 Improvement measures for sludge incineration ash bridge

We would like to introduce examples of cases where our services have been adopted for the regular maintenance of existing plants!

We would like to introduce a case where our "Brodisk" was adopted. "There is already an air rater (metal mesh type) installed as a bridge countermeasure in the hopper for sludge incineration ash. However, due to poor discharge, we would like to leave the existing air rater as is and add the Brodisk," was the inquiry we received. After receiving information from the customer regarding the hopper diagram, the type and arrangement of the existing air rater, and the contents, we provided recommendations for the model and arrangement of the Brodisk. After installation, the plant has been operating without any issues. 【Case Overview】 ■ Hopper dimensions: 2500×2500 ■ Discharge section dimensions: 300×300 ■ Contents: Sludge incineration ash, bulk density 0.5-0.6 ■ Existing equipment: Bin flow ■ Our equipment arrangement: 12 units installed in total, with 1 unit on the lower level and 2 units on the upper level per side *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0679 Corner hopper residual measures (rice flour)

A case where the residual rice flour in the four corners of the corner hopper was resolved through aeration using this product.

We would like to introduce a case study where our "Brodisk" was installed. Although the hopper has a sufficient incline, rice flour remains in the four corners of the corner hopper. This was resolved through aeration using our product. For control, we intermittently turned on the air for eight Brodisks in pairs using the C-SV4 controller, which has four built-in solenoid valves. 【Case Overview (Partial)】 ■ Hopper Overview - Upper Dimensions: 1800×1800 - Discharge Dimensions: 700×700 - Hopper Incline: Just under 70 degrees ■ Contents - Rice Flour 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of our equipment excels in strength and durability. We believe you will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0699 Elastic disk: Delivery of the Byton Brody Disk Mini.

Replace the material of the elastic disk with the standard specification of special silicone, and we would like it to be made of fluororubber (Viton)!

We would like to introduce a case study regarding the delivery of the Baiton Brodisk Mini. We received an inquiry from a customer in the electronic components industry stating, "We are unable to effectively resolve the clogging of powder materials (bridging phenomenon). Hitting it with a resin hammer has no effect, and using a vibrator only compresses the powder further. How can we prevent the bridging of the powder?" The results of the implementation have been favorable. Since it is a measure using air aeration, the powder does not become overly compacted, and there is no damage to the hopper. [Container Details] ■ Eccentric Hopper ■ Diameter: Φ350 ■ Outlet Diameter: Φ50 ■ Inclination Angle (gentle slope side): 60° ■ Inclination Angle (steep slope side): vertical *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0706 Example of adopting a metal detector-compatible broad disk in a food factory.

Compliant with food hygiene testing! A model designed to be detected by metal detectors and X-ray inspection machines.

We would like to introduce a case where a "Brodisk" equipped with an elastic disk that reacts to metal detectors was adopted in a food factory handling powdered tea. This model is designed to detect the elastic disk in the event that it breaks and contaminates the product, using metal detectors or X-ray inspection machines. The elastic disk used in the Brodisk compatible with metal detectors complies with food hygiene testing standards. If you require a test report, please let us know when you place your order. 【Case Overview】 ■ Target Product: Powdered Tea ・ Particle Size: Approximately 10μm ・ Bulk Density: Approximately 0.2-0.3, but can be 0.4-0.5 when compacted ■ Installation Location: Bottom of the storage hopper (to prevent clogging at the supply section to the spring conveyor) *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0712 Elimination of bridge and rat holes in talc + additives.

Introducing a solution for rat holes occurring at the bridge of the Φ800 hopper and its lower reducer!

We would like to introduce a case where the issues of bridging and rat holes with talc and additives were resolved. Four blow discs (BD-15 type) were installed slightly above the discharge section of the Φ800 hopper. Two blow disc minis (BD-08 type) were installed in the reducer. With these countermeasures, the user's challenges were cleared in one go. How can we easily and cost-effectively eliminate bridging, rat holes, powder blockages, and obstructions? We believe we have the answer. While we cannot guarantee 100%, we are confident that there is a significant possibility of solving customer issues easily and at low cost. 【Countermeasures】 <Equipment Installation> ■ Four blow discs (BD-15 type) installed slightly above the discharge section of the Φ800 hopper ■ Two blow disc minis (BD-08 type) installed in the reducer <Control> ■ Using the C-SV4 controller with four built-in solenoid valves, sequential air aeration is applied to the above blow discs and blow disc minis in four locations. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0728 Prevention of bridging in powder coatings

We provide information on suitable placement and control methods tailored to the individual conditions of our users!

We would like to introduce a case where a blow disk was installed as a measure against bridging in powder coatings. In this case, the equipment was adopted with the installation of 8 units from the beginning. The results, of course, have been favorable. Since the subject material is powder coating, an elastic disk made of EPDM has been selected for the blow disk. 【Hopper Conditions】 ■ Diameter: Ø1200 ■ Cone section slope: just under 60° *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other sorting machines and foreign object removal equipment
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing encoder disks by applying slitting processing to aluminum thin plates.

We have produced aluminum encoder disks with fine slit processing using our thin plate processing technology. Our thin plate processing can handle thicknesses from 0.01 mm.

We are engaged in the production of aluminum encoder disks. We can also perform slit processing and printing. Our company handles thin plate processing with thicknesses ranging from 0.01 mm, and we have a track record of delivering to shims and medical devices. Features: - Cutting with a high-precision fiber laser processing machine that produces minimal burrs - Compatible with various materials such as aluminum, SUS, copper, phosphor bronze, and brass - Printing that does not fade is also possible - We can accommodate various plate thicknesses, allowing for bulk orders of the same shape with different thicknesses.

Company：富山プレート
Price：Other

encoder
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High precision! We manufacture optical encoder disks with a diameter of 10mm from a single point.

We manufacture high-precision optical encoder disks and rotary wheels in a 10mm size, with a proven track record of delivery to medical device manufacturers, starting from just one unit.

We manufacture metal disks for optical encoders used in quantitative measurement equipment. We have a track record of delivering sizes up to 10 mm in diameter to medical device manufacturers, and we provide high-precision slit processing. We can also produce items starting from a single piece, so please feel free to consult us regarding size and specifications. Engraving of company names and other markings is also possible using high-precision laser marking technology. If your company is looking for precision parts for optical encoders, please do not hesitate to contact us.

Company：富山プレート
Price：Other

encoder
Disk

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Disk Product List and Ranking from 50 Manufacturers, Suppliers and Companies | IPROS GMS

Disk Manufacturer, Suppliers and Company Rankings

Disk Product ranking