Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 1085 items
Udon, rice, potatoes, and food residues high in fat are recyclable.
The main body of the dryer performs crushing and drying simultaneously, resulting in a simple and compact system. It can operate continuously in batch mode for 24 hours.
Environmentally friendly and economical water system cleaning device.
It is a "water-based cleaning machine" with a 6-tank configuration. Cleaning tank + rinsing tank (tap water) + rinsing tank (pure water) x 2 + warm water lift and draining tank + drying booth (hot air) The process flow is as follows: Basket set ⇒ Static electricity removal ⇒ Ultrasonic rinsing ⇒ Warm water lift and draining ⇒ Drying (blow drying) 【Features】 ● High safety ● Low running costs ● Environmentally friendly ● Clean room compatible ● Can also be used for the removal of solids such as burrs ● High cleaning quality can be achieved Depending on the application, the following cleaning aids may be used: 1. Light detergent 2. Alkaline electrolyzed water 3. Rust inhibitor 4. IPA or ethanol 5. Fluorinated solvents *If you require precision and high cleaning quality, ultra-pure water or pure water will be used.
Introducing a vacuum dryer that automatically repeats heating and vacuum processes, allowing for quicker drying.
The "NVOW-40" is a vacuum dryer that lowers atmospheric pressure to reduce the boiling point of the adhering liquid for drying. The vacuum level is 90 kPa. It is suitable for products that require relatively low-temperature drying (such as semiconductor-related products) and for complex and delicate items. It automatically repeats heating and vacuum processes, allowing for quicker drying. 【Features】 - Lowers atmospheric pressure to reduce the boiling point of the adhering liquid for drying. - Suitable for products that require relatively low-temperature drying (such as semiconductor-related products) and for complex and delicate items. - Automatically repeats heating and vacuum processes for quicker drying. - Considers the type of liquid, product shape, safety, and more. - Provides effective and clean drying in a short time. *For more details, please refer to the PDF document or feel free to contact us.
Fully automatic ultrasonic deburring cleaning and drying machine. This is our pride, a high-speed conveyor automatic machine.
The VEGA-DB series is an upgraded version of the best-selling fully automatic cleaning and drying equipment designed for deburring. Its major points are not only its performance but also its durability, resistance to damage, and ease of maintenance and inspection. Additionally, because it is standardized, managing spare parts is also easy. This is a significant factor in its growing popularity in Asia. It is a fully automatic deburring and cleaning device equipped with a wide range of options that can accurately respond to the ever-changing demands of customers. For quality control of deburring for customers expanding globally, please trust the VEGA series.
![Boot Dryer "Sukatto-kun" [Dry your boots quickly!]](https://image.mono.ipros.com/public/product/image/83a/130176008/IPROS8040460464997334448.jpg?w=280&h=280)
Dry your rubber boots quickly! An essential item for hygiene management: 'Rubber Boot Dryer'
Dry your rubber boots quickly! An essential for hygiene management: 'Rubber Boot Dryer Skat-kun' 【Features】 ■ A product used in various places such as food factories for hygiene management, including meat and ham processing, as well as in cattle, pig, poultry farms, food processing plants, restaurants, school lunches, and kitchens of eateries. ■ Quickly dries moisture inside rubber boots. ■ Usable immediately after installation with a 100V power supply. ■ Air is blown only to the area where the rubber boots are set, thanks to a special valve. ■ Economical with timer settings available for each level. *For other functions and details, please download the catalog or contact us.
Energy-saving and maintenance-free! Vibration-type pre-drying device.
Energy-saving, modular design, maintenance-free! Vibrating Pre-Drying Device ■□■Features■□■ ■Stable shape, gentle pre-drying ■Removes moisture up to 6 percent ■Immediately receives short pasta products after the Polymatik® pasta extrusion molding device, gently removing moisture up to 6 percent, thereby adding stability to the product and preparing it for actual high-temperature drying inside the Bühler Turbothermatik® ■Powerful ventilation enables uniform pre-drying across the entire surface of the screen ■Maintenance-free ■Saves energy through excellent insulation ■Modular design ■For more details, please contact us.
Achieving the highest quality short pasta in a small space! Belt-type drying device.
Achieving the highest quality short pasta products in the smallest space Belt-type drying device ■□■Features■□■ ■High processing capacity - By accurately controlling the airflow and carefully dividing the temperature and humidity zones, high processing capacity is maintained even when handling products of special shapes. - Extremely uniform airflow across the entire screen area achieves high efficiency. ■Optimal drying cycle - Individual belt drives enable the realization of drying cycles that are best suited to the recipe or shape of specific products. - The gates at the product's entrance and exit are controlled by servo motors, resulting in minimal energy loss and contributing to improved temperature and humidity control. - Functions for monitoring the thickness and weight of the product layers are integrated into the control system. ■All components that come into contact with the product are made of special stainless steel, maintaining high hygiene standards. ■For more details, please contact us.
Drying system for grains and oilseeds
The Schmidt-Seeger Eco Dry LEEA continuous flow dryer achieves uniform drying and optimal moisture absorption rates. It enables efficient drying of grains, corn, rapeseed, rice, sunflower, and various cereals.
The latest drying technology enables the production of long pasta with high energy efficiency and high quality.
The pasta dryer Ecothermatik not only produces high-quality long pasta with reduced drying time due to a newly developed drying process, but also significantly reduces energy consumption through heat energy recovery devices. It excels in maintainability and enables substantial improvements in pasta production efficiency and production management.
![Vacuum microwave far-infrared dryer [Hyper Dry]](https://image.mono.ipros.com/public/product/image/12b/140700001/IPROS_11963165634277431000.jpg?w=280&h=280)
It is the world's fastest high-quality dryer.
It is possible to achieve high-quality drying with extremely low oxidation. The drying time is a rapid drying process of about 30 to 120 minutes. Contamination during the drying process occurs very rarely.
It is a revolutionary drying system using a heating fan.
For mild drying with minimal damage, we perform low-pressure drying. Low-temperature drying at around 60°C is possible. It has a simple structure and does not require pressure vessels or vacuum pumps like those used in vacuum dryers.
Case of reducing processing costs by 12.5 million yen! Free sample tests are currently being conducted!
By reducing the wastewater and waste liquids that are sent outside the company as industrial waste, we can achieve zero emissions and reduce processing costs. We are also conducting free treatment tests for wastewater samples! 【Benefits of Implementation】 ◆ Significantly reduce industrial waste disposal costs! * In the case of 4 tons per day, a cost reduction of 12.5 million yen annually (see downloadable materials) ◆ Reduce the amount of wastewater and waste liquids by over 90%! ◆ Contribute to zero emissions!
Reduce factory wastewater by over 96%! Lower industrial processing costs and expand the scope of wastewater reuse.
At Kowa Shoji, we handle the "Vacuum Dehydration Drying Device" that purifies waste liquid through dehydration and drying. This device separates moisture from concentrated waste liquids and high-water-content sludge using a vacuum distillation method, contributing to the reduction of industrial waste volume and the reuse of wastewater. The drive unit is maintenance-free with only a pump, and pre-adjustment of the treated sludge is unnecessary, allowing for automatic operation in both "batch" and "continuous" modes. Additionally, by adding a weighing unit, the concentration ratio can be set arbitrarily, improving efficiency. 【Features】 ■ Automatic operation in both "batch" and "continuous" modes ■ Maintenance-free drive unit with only a pump ■ Fully automatic operation with an automatic discharge mechanism for residual sludge ■ Possible moisture content of 1-5% in the processed cake ■ In batch operation, adjustment of moisture levels is possible *For more details, please refer to the PDF document or feel free to contact us.
Short-time drying created by the synergistic effect of stirring and crushing.
This is a high-speed stirring drying and coating machine under reduced pressure. The high-speed vacuum dryer achieves maximum drying efficiency and uniform coating and drying through stirring under reduced pressure. The interior of the can is placed in a vacuum state, and heating is applied from the bottom and sides of the can through a jacket. By stirring and rolling the material to be dried, heat is evenly applied, allowing for drying in a short time. Additionally, the crushing action of the chopper enhances drying efficiency and is also effective for adjusting the particle size of the dried product. For more details, please contact us or refer to the catalog.
Ideal for bulk processing! A device that can continuously dry and discharge granules produced by wet extrusion granulation.
The "Rotary Fluidized Bed Dryer" is a drying device that can continuously dry and extract granules produced by wet extrusion granulation in a closed system. The conditions for the wet granules are as follows: particle size and diameter of 0.4 to 0.6 mm, φ0.5×3 to 5 mm, cylindrical granules, bulk density of 0.4 to 0.6 g/cm³, and moisture content of wet granules at 10 to 20% (reference values). 【Features】 ■ Continuous drying and extraction of granules produced by wet extrusion granulation in a closed system ■ Suitable for large-scale processing ■ Can maintain a constant residence time within the drying device (enabling validation of drying conditions) *For more details, please refer to the PDF document or feel free to contact us.
Filtration area increased by 35%! Coating comparable to rolling flow method is possible with three types of spraying methods!
The "Powder Dry FP" is a granulation and drying machine equipped with an optimal fluidization mechanism that achieves uniform fluidization without segregation within the layer. It is equipped with a filter that increases the filtration area, allowing for a reduction in the number of shaking and backwashing cycles, which can shorten operating time. 【Features】 ■ No performance differences between scales → The main dimensions are determined through testing and discrete element method (DEM) analysis. ■ Innovative filter design → Compared to conventional filters, the filtration area is increased by 35%. ■ Three types of spray methods → Based on analysis results, it employs two types of top spray methods that allow for uniform spraying, along with a side spray method, resulting in three types of spray methods. It enables coating comparable to rolling fluidization methods.
A batch dryer that utilizes far infrared rays and air flow adjusted for humidity and temperature to dry scallop adductor muscles.
Here is a case study of the delivery of the "Dried Scallop Meat Drying Machine." The conventional drying method involved high-temperature drying with gas hot air, repeating the drying process several times a day. This led to issues with labor, unstable drying processes due to weather conditions when using sun drying, and increased work hours. This device, which utilizes far-infrared rays, repeatedly dries the moisture content of scallop meat from about 62% at the initial stage to 16% in the final product (steaming), completing the process in about 15 to 20 days without being affected by the weather, until a high-quality grade is achieved. The advantages of far-infrared drying and the efficiency of production were recognized, leading to its adoption. 【Specifications】 ■ External dimensions: 8000L × 6800W × 3500H ■ Power consumption: 98.6kW ■ Stirring fans: 7 units, Humidifiers: 2 units, Hot air heaters: 2 units ■ Far-infrared heaters: 18 units, Dehumidifiers: 4 units *For more details, please refer to the related links or feel free to contact us.
![[Delivery Example] Off-line Repair Partial Drying](https://image.mono.ipros.com/public/product/image/b1c/2001428532/IPROS56121901080297638391.png?w=280&h=280)
We select the heat source each time to meet our customers' requests! It varies with far, medium, and near infrared.
We would like to introduce a case study of "off-line repair for partial repair drying." Off-line repair refers to the touch-up process after body painting in an automobile factory. The painting line in an automobile factory consists of electrodeposition painting followed by hot air drying. During this process, any paint irregularities that occur are repaired off-line and then returned to the line after the repair. Depending on customer needs, the heat source can vary, including far, medium, and near infrared. Generally, the heating conditions for repair work are maintained at 140 to 160°C for 20 minutes. [Reasons for recommending radiant heating] - Since no air is generated, foreign substances do not adhere to the paint film. - For heating automobile parts, there is a high need for mobility and operational flexibility of the irradiation unit. *For more details, please refer to the related links or feel free to contact us.
It ensures thorough drying, sterilization, and deodorization of the inside of the boots, preventing the growth of bacteria!
We create a comfortable working environment through the drying of the inside of the boots and ozone treatment.
★Why not turn the waste liquid you are currently disposing of into something valuable?★ Accepting tests for 10 kg of solid material from 1000 L of slurry liquid in 1 hour.
The "Pleated Filter Dewatering" device allows for the suction filtration of high-concentration slurry (mud-like mixture), forming a cake layer on the filter surface. This formed cake layer is then dewatered and dried, allowing it to be collected as sludge (aggregated solid). Our unique pleated filter enables dewatering and drying in a compact device with a short cycle time. No coagulants or filtration aids are required. The moisture content of the sludge can be as low as 1% for inorganic materials. 【Features】 ■ Individual liquid separation to dewatering and drying in 60 minutes (all-in-one) ■ Compatible with ultra-high concentration turbid water ■ Processing capacity of 400 kg/day (based on processing 1,000 L of 20,000 PPM turbid water) ■ Maintenance requires only filter replacement ◎ For more details, please refer to the PDF document or feel free to contact us.
"Dakkan" is now available in a tabletop size! A flat membrane dewatering and drying device suitable for verification before the introduction of Dakkan.
The "Flat Dakkann" is a tabletop-sized flat membrane dehydration and drying device derived from Dakkann, designed for small quantities and diverse research and development applications. Its compact size allows for research and development as well as various sample tests without the need for a dedicated space, thereby improving efficiency. It enables high-performance dehydration and drying easily, allowing for in-house research and development of small quantities and diverse products, which helps reduce costs. 【Features】 ■ Tabletop size ■ Easy high-performance dehydration and drying ■ Cost reduction for small quantities and diverse products in-house ■ Increased efficiency due to no space restrictions *For more details, please refer to the PDF document or feel free to contact us.
[Case Presentation] Significantly reduced waste liquid disposal costs. Completed from solid-liquid separation to drying in about 60 minutes. Processing test OK.
The "Pleated Dryer Dehydration" device sucks in and filters high-concentration slurry to form a cake layer on the filter surface. This cake layer is then dehydrated and dried, allowing it to be collected as sludge. It employs patented filter technology to achieve powerful processing capabilities. The compact design integrates a dewatering machine and a dryer, minimizing the installation area. No coagulants or filtration aids are required, contributing to reduced running costs. The moisture content of the sludge has been recorded at around 1% for inorganic materials. 【Features】 ■ Processing capacity of 400 kg/day (when processing 1000L of wastewater at 20,000 ppm) ■ Solid-liquid separation to dehydration and drying completed in about 60 minutes ■ Capable of handling ultra-high concentration slurry ■ Maintenance requires only filter replacement *You can view a case study that includes information about this product from the "Download" section. We also offer sample testing. Please feel free to contact us.
It can perform solid-liquid separation, dewatering, and drying all in one unit, allowing for low-cost operation! Suitable for particle recovery and liquid circulation reuse, etc.
"Dakukan" is an advanced dewatering and drying device for powder materials that can perform solid-liquid separation, dewatering, and drying all in one unit. 【Features of Dakukan】 - Capable of solid-liquid separation, dewatering, and drying in one unit - New technology that supports both powder and liquid recovery - Closed system design to minimize powder exposure - Suitable for small quantities and a variety of products - Compatible with high-concentration slurry - Generally does not require coagulants or filtration aids - Can be installed in narrow spaces - Few moving parts in the main unit, reducing maintenance costs 【Main Challenges for Users】 - Want to recover particles contained in aqueous solutions - Want to remove foreign substances and recycle liquid - Want to perform particle flushing after filtration - Need to perform filtration and drying in one unit due to limited installation space - Do not want to include concentration devices like MF membranes before the filtration unit - Existing devices have high initial costs - Not suitable for small quantities and a variety of products, and maintenance is difficult
