Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1681～1695 item / All 1930 items
Seismic resistance with allowable strain of 4% or more without an in-core.
No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.
Seismic resistance with allowable strain of 4% or more without an in-core.
No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.
Seismic resistance with allowable strain of 4% or more without an in-core.
No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.
No need for electric fusion, easy installation with just one wrench! Thanks to the mechanical method, installation can be done anywhere, including wet areas!
The Suppon MPX is a fitting that allows for the connection of polyethylene pipes for water distribution without the need for an in-core or disassembly. Since it can connect polyethylene pipes using a mechanical method, there is no need for electric fusion work, and it can be installed with just one wrench, allowing for immediate water flow. Because electric fusion work is not required, it can be easily installed in locations where spring water and other water sources may occur, making it versatile for various environments. With a wide range of options available for connecting different types of pipes, it is ideal for all kinds of job sites.
Significant reduction in construction time is possible with mechanical construction methods! No electric fusion work required, making it easy to install joints in wet areas and confined spaces!
SKX is the industry's first joint that does not require disassembly and can be installed using a short wrench. It is ideal for connecting to existing pipes in renovation work for buildings such as apartments. The connection of high-density polyethylene pipes is mechanical rather than fusion, significantly reducing installation time. Since it can be installed with fewer tools, total costs can also be reduced. Water can be passed through immediately after connection. The low tightening torque allows for installation with short tools like a short wrench, enabling time savings and installation in tight spaces. It can also be installed at sites with water accumulation, such as from spring water, as electrical fusion work is not required. There is also a rich lineup of fittings, including reducing sockets, elbows, tees, male-threaded sockets, and female-threaded sockets.
A mechanical joint that connects internally and externally coated steel pipes with high-density polyethylene pipes (ISO outer diameter)! Since coating removal and fusion work are unnecessary for joining, construction time is reduced!
No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that simply requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that connects high-density polyethylene pipes with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It allows for connection without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of high-density polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for a fusion machine. It can also slide along the pipe, making it easy to connect existing pipes with newly installed ones. Water can flow immediately after connection, significantly reducing construction time. When using new high-density polyethylene pipes for renovation work, it can be utilized at the junction with existing PD and VD pipes. Please give it a try when connecting dissimilar pipes, such as internally and externally coated steel pipes and high-density polyethylene pipes.
A mechanical joint that connects coated steel pipes and sewer poly pipes! Since coating removal and fusion work are unnecessary for joining, construction time is reduced!
No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that simply requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that connects polyethylene pipes for sewage with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It can be joined without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of sewage polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for fusion equipment. It can also slide along the pipe, making it easy to connect existing pipes with newly installed pipes. Once connected, water can flow immediately, significantly reducing construction time. Please give it a try when connecting dissimilar pipes between internally and externally coated steel pipes and polyethylene pipes for sewage.
Switching pipe types with flange-less connections between steel pipes and high-density polyethylene pipes! No need for flange processing or welding of steel pipes, simplifying construction and reducing costs!
No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical connection methods! The "Suppon MPX MP-V" joint is useful when switching from high-density polyethylene pipes (ISO outer diameter) to steel pipes. On the high-density polyethylene side, there is no need for an in-core, disassembly, or electric fusion work, allowing for smooth construction operations. Since there is no cooling time, water can be passed through immediately, significantly reducing construction time. Additionally, on the steel pipe side, mechanical joining eliminates the need for threading or flange welding. Construction can begin immediately after cutting the steel pipe. Since the pipe type transition is not a flange connection, the risk of water leakage from the flange area is reduced, and it also excels in safety aspects such as earthquake resistance. It is also possible to slide along the pipe, making it easy to connect existing and newly installed pipes. This can be utilized for repairs or renovations of aging piping systems at the connection points with existing pipes. If disassembly is needed, it can be easily removed by simply loosening the installed bolts and nuts. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and steel pipes.
Convert high-density polyethylene pipes (ISO outer diameter) to high-density polyethylene pipes with JIS outer diameter! A mechanical joint that solves the "troubles" on site!
No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical joints! The Suppon MPX is a mechanical joint that allows for pipe connections simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. One of its lineup, the "Suppon MPX MP-V (for JIS-P)," is a joint that can connect high-density polyethylene pipes (ISO outer diameter) with polyethylene pipes of JIS outer diameter. For example, if you encounter a situation where "the high-density polyethylene pipe you prepared and the existing pipe installed are of different standards," this product allows you to convert and connect them at the joint. It can also slide along the pipe, making it easy to connect existing and new pipes. It can be utilized at the connection points during repairs or renovations of aging piping. Please give it a try when switching between high-density polyethylene pipes (ISO outer diameter) and high-density polyethylene pipes (JIS outer diameter).
High-density polyethylene pipes can be connected to cast iron pipes with just one joint! A mechanical joint that allows easy connection to existing pipes without disassembly through a slide joint!
No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical connection methods! The Suppon MPX is a mechanical joint that allows for pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that allows for switching from high-density polyethylene pipes (ISO outer diameter) to cast iron pipes. It accommodates cast iron pipes with sizes ranging from φ75mm to 150mm. During the joining of cast iron pipes, no disassembly is required, and no lubricant or insertion machine is needed; you can simply insert the pipe and tighten the bolts and nuts for construction. It is also possible to slide along the pipe, making it easy to connect existing pipes with newly installed ones. This can be utilized for repairs or renovations of aging piping, particularly at the connection points with existing pipes. If removal is necessary, it can be easily detached by loosening the installed bolts and nuts. Please give it a try when connecting dissimilar pipes of high-density polyethylene (ISO outer diameter) and cast iron.
Connection can be made without fusion work or coating removal work, reducing construction time! A mechanical joint that allows flange-less connection of high-density polyethylene pipes and internally and externally coated steel pipes!
No disassembly required for connection! Introducing the mechanical joint series "Suppon Joint"! The product we are introducing is the "Suppon MPX MP-D". It is a mechanical joint for connecting different types of pipes, allowing a switch from high-density polyethylene pipes (ISO outer diameter) to internally and externally coated steel pipes (VD pipes, PD pipes). On the high-density polyethylene pipe side, it is a mechanical joint that can be connected without the need for an in-core or disassembly. There is no need for electric fusion work or preparation of fusion machines. On the internally and externally coated steel pipe side (VD pipes, PD pipes), special tasks such as threading and coating removal are not required. The mechanical method simply involves inserting and tightening into the joint socket, significantly reducing the time required for connection. Additionally, since the pipe type switching section is flange-less, the risk of water leakage from the flange area is also reduced, making it excellent in terms of safety, including earthquake resistance. It can slide along the pipe, making it easy to connect existing pipes with newly installed pipes. During renovation work, such as replacing buried coated steel pipes in facility exteriors with new high-density polyethylene pipes, it can be utilized at the pipe type switching points with existing pipes. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and internally and externally coated steel pipes (VD pipes, PD pipes).
Flangeless connection of high-density polyethylene pipes and stainless steel pipes reduces the risk of leaks! A mechanical joint that eliminates the need for threading or electric fusion work!
No disassembly required, easy connection! The mechanical joint series "Suppon Joint"! Suppon MPX is a mechanical joint that allows pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. When switching from high-density polyethylene pipes (ISO outer diameter) to stainless steel pipes is necessary, the "Suppon MPX MP-V (for SUS)" comes in handy. On the high-density polyethylene side, there is no need for electric fusion work, allowing for immediate water flow and a reduction in construction time. On the stainless steel pipe side, there are no threading or flange welding tasks due to mechanical joining. Since the pipe type switching section is not a flange connection, the risk of water leakage from the flange area is also reduced, making it excellent for safety aspects such as earthquake resistance. It is also possible to slide along the pipe, making it easy to connect existing and newly installed pipes. If disassembly is required, it can be easily removed by simply loosening the installed bolts and nuts. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and stainless steel pipes.
No need for fusion work or in-core insertion work! High-density polyethylene pipes can be connected to water supply polyethylene pipes with a single fitting!!
SKX is the industry's first hybrid pipe fitting that does not require disassembly and can be installed with a short wrench, making it ideal for switching between existing and new pipes during renovations in apartments and similar settings. The product we are introducing this time is the "SKX Socket for High-Density Polyethylene Pipe (JIS) for Water Supply × Polyethylene Pipe for Municipal Roads." It is a fitting that allows for easy connection between high-density polyethylene pipes (JIS) for water supply and polyethylene pipes for municipal use using a mechanical method. Since the connection of high-density polyethylene pipes (JIS) is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, it significantly reduces installation time, and water can flow immediately after connection. For connecting polyethylene pipes for water supply, there is no need for core drilling, allowing for immediate installation after cutting the pipe. SKX features a through-type design, enabling easy installation and connection from existing pipes. Furthermore, with low tightening torque, it can be installed using short tools like a short wrench, facilitating time-saving installations even in tight spaces. Disassembly is possible simply by loosening with a tool. With a rich lineup of different diameter sockets, elbows, and male-threaded sockets, as well as connections for hybrid pipes, it accommodates various connection needs.
Very high fastening strength with just one step! Fastening different thicknesses of iron that are difficult to weld without pre-drilling. No heat is generated, and it can be easily used by anyone.
Generally, it is said that thick plates and thin plates with a large thickness-to-width ratio are difficult to weld. When the ratio of thin plates to the total plate thickness is high, the difficulty of welding increases. We will introduce a method that allows for easy fastening even under such conditions. 1. 'RIVSET' is a high-strength, reliable self-piercing rivet. It mechanically joins different types of materials easily without the need for a pilot hole. It is also possible to fasten more than three materials. This product penetrates the upper base material and expands at the tip due to the shape of the die within the lower base material. 2. In the context of the need for CO2 reduction, the fastening method RIVCLINCH, which uses only air as a power source, does not generate heat and does not use auxiliary materials such as rivets, relies on plastic deformation. By applying multiple points, it can achieve comparable shear strength to spot welding and SPR. 3. 'RIVTAC' allows for high-speed fastening of high-strength materials without the need for a pilot hole. It can be used for profile structures with one-sided access fastening and is compatible with fastening dissimilar materials and the use of adhesives.
"Connecting thoughts, changing the flow" - Possibilities expand from just one joint!
The fittings mainly called elbows serve to change the direction of fluid (gas or liquid) flow. Depending on the usage, they are classified into three types based on the bending angle: 45°, 90°, and 180°. Additionally, fittings known as tees and wyes have the function of branching or merging fluid flow. Nipples and sockets connect fittings of the same diameter or extend their length, while reducers and bushings connect fittings of different diameters, allowing for the expansion or reduction of pipe size. Fittings such as caps and plugs function to stop the flow of fluid by sealing the ends of pipes. Fittings also serve other roles, such as transmitting mechanical power and absorbing vibrations or thermal expansion.
