Heating device Product List and Ranking from 142 Manufacturers, Suppliers and Companies

[Case Study] Triple-Wrapped Clean Hot

How to create flow paths and bend heaters are key points! Introducing case studies for solutions.

Here is a case study solved by Shin-Net Industrial. We received a request to use our "Clean Hot" product, but due to limited installation space, the customer wanted a product that could be half the length, even if the diameter was larger. Simply increasing the bending diameter of the heater would reduce the flow rate and pose a risk of overheating, so it was necessary to devise a solution for the gas flow. Based on the data from when we developed the same product, we worked on increasing the gas flow radially and creating a heater with equivalent performance. [Case Study <Solution>] - Based on the data from when we developed Clean Hot, we increased the gas flow radially and worked on creating a heater with equivalent performance. - The dimensions of the gas flow path were determined to ensure the flow rate remained the same. *For more details, please refer to the PDF document or feel free to contact us.

Company：SHINNETSU.Co,.Ltd. Headquarters
Price：Other

Heating device
Other heaters
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Small Flow Gas Heater

Increase the flow speed and enlarge the contact area of the heater! Introducing a case study for resolution.

Here is a case study solved by Shin-Net Industrial. We received a request to raise a small gas flow of 0.1L/min to 10L/min up to 350℃. The standard products we offer are designed for several hundred L/min, so they are too small for the required flow rate. Unlike water, gas does not transfer heat easily, so we thought the key was to increase the flow velocity and enlarge the heater's contact area. Therefore, we ensured sufficient flow velocity by narrowing the gas flow pipe. We selected our 1.8 ultra-thin heater and tightly wound it around the gas flow pipe to secure the contact area. [Case Study <Solution>] - Increase flow velocity and enlarge the heater's contact area - Ensure sufficient flow velocity by narrowing the gas flow pipe - Select the 1.8 ultra-thin heater and tightly wind it around the gas flow pipe to secure the contact area *For more details, please refer to the PDF document or feel free to contact us.

Company：SHINNETSU.Co,.Ltd. Headquarters
Price：Other

Heating device
Other heaters
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High flow gas heater compatible with over 1000 NL/min

Inline electric heater "High Flow Gas Heater" that can be directly connected to piping.

Compared to a typical shell-type heater (which has linear sheath heaters arranged inside the container), the length is reduced to about half. Our technology for bending sheath heaters in complex shapes has achieved compactness. It is an inline type that can be directly connected to existing piping. Additionally, the gas connection part is made of stainless steel, allowing for clean gas heating.

Company：SHINNETSU.Co,.Ltd. Headquarters
Price：500,000 yen-1 million yen

Heating device
Other heaters
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Roll for heat treatment of synthetic fibers

From aerospace materials to fashion fabrics! Rolls for high-precision thermal processing of fibers.

Super fibers with ultra-high strength and excellent heat resistance, featuring a unique texture, are new synthetic fibers. In the manufacturing process of these fibers, the "thermal stretching," which involves pulling the yarn while heating it after spinning, holds significant importance. In this process, the "jacket roll" thermally processes the fibers with high precision at a high-speed stretching of 400 kilometers per hour, aligning the molecular arrangement and allowing for uniform crystallization without inconsistencies. 【Features】 - Produces a consistently homogeneous and strong material quality - Main applications: synthetic fibers, carbon fiber, spandex For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Textile Processing Machinery
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-woven fabric calendar roll

Freely control the texture of materials! A jacket roll that demonstrates excellent functionality.

The thermal processing of plastic films and magnetic tapes, as well as the rapidly expanding applications of non-woven fabrics in recent years, such as in paper diapers and automotive interior materials, is where the "Jacket Roll" demonstrates its excellent functionality. Additionally, it thermally fuses synthetic fiber webs (a sheet-like mass of fibers aligned in one direction) at regular intervals, creating materials with uniform strength suitable for fabric and a variety of textures appropriate for different applications. 【Main Applications】 ■ Non-woven fabric for paper diapers ■ Non-woven fabric for automotive seats, etc. ■ Magnetic tapes ■ Woven fabrics ■ PVC sheets, and more For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Textile Processing Machinery
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid Circulation Jacket Roll

Reduce fluid flow to 25% or less! Jacket roll equipped with a jacket chamber.

The "Fluid Circulation Jacket Roll" is a jacket roll equipped with a jacket chamber for fluid circulation. Thanks to the high-precision uniform temperature effect of the jacket chamber, it reduces fluid flow by 25% compared to conventional methods, while achieving a temperature distribution accuracy of ±1°C on the roll surface, thus balancing "energy saving" and "ultra-high precision." Furthermore, the reduction in fluid flow significantly lowers equipment costs. It can operate for both heating and cooling. 【Features】 ■ Reduction of equipment costs ■ Choice of heat source ■ Prevention of condensation on cooling rolls ■ Energy-saving effect ■ Operable with set roll surface temperature For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Food Packaging Machinery
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sleeve Jacket Roll

Contributing to further efficiency! Reducing equipment costs by replacing embossed sleeves.

The "Sleeve Jacket Roll" is a groundbreaking product that allows for the replacement of only the outer cylinder (sleeve) of the embossing roll during the changeover of production varieties such as non-woven fabrics. There is no need to completely replace the expensive embossing rolls for each pattern, which helps reduce equipment costs. By introducing this sleeve roll along with various embossing sleeves, equipment costs are lowered, contributing to the production of a wide variety of materials and improving production efficiency. 【Features】 ■ Excellent cost performance ■ Quick replacement operation For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Other processing machines
Textile Processing Machinery
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Medium frequency induction heating device

Heating with high precision from liquids to metals! A heating device that enables the production of high-quality products.

The "Medium Frequency Induction Heating Device" utilizes an induction heating method with a medium frequency magnetic field that has high current penetration, allowing for precise heating of metals at a stable temperature, improving yield, and achieving the production of high-quality products. The rapid temperature rise to the set temperature also contributes to production efficiency and energy savings. Since it does not use heat sources other than electricity, it is safe and reduces CO2 emissions. Additionally, it minimizes heat release to the outside, providing a safer working environment. 【Features】 ■ Heating coils are manufactured in various shapes and capacities to match the heated object. ■ Cooling methods can be selected from self-cooling, air cooling, or water cooling. ■ Capacity ranges from 1 to 350 kVA, with frequencies up to 1000 Hz, accommodating a wide range of specifications. ■ Output frequency can be adjusted within the specification range. ■ Matching transformers are also produced in-house, compatible with any voltage or current. For more details, please refer to the catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ideal for film thermal processing applications ◎ "Hybrid Roll" with cooling function

Rapid cooling after hot processing is now possible! Significantly reduce downtime and greatly increase operational efficiency!

The "Hybrid Roll" equipped with a mist generation device is an induction heating jacket roll with a cooling function that enables rapid cooling after heating. In addition to reducing equipment costs, downtime, and working hours, it significantly improves operational efficiency. 【Features】 ■ Electric type, no need for large auxiliary equipment ■ Cooling time drastically reduced to 1/4 of natural cooling time (cooling time from 200°C to 100°C) ■ Ideal for small-lot production of various types due to rapid temperature changes ■ Minimal auxiliary equipment and easy maintenance compared to heating and cooling rolls that circulate fluids ■ Maintains a constant temperature unaffected by external heat or load ★ Exhibition information is provided below. For more details, please contact us or visit the exhibition.

Company：トクデン
Price：Other

Heating device
Other processing machines
Food Packaging Machinery
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Presentation of Energy Saving Case: Induction Heating Jacket Roll for Decarbonization and CO2 Reduction

Achieve up to 65% energy savings annually! By converting electricity into heat with an efficiency of over 99%, we contribute to decarbonization by reducing CO2 emissions in the production process.

The induction heating jacket roll, which uses neither water nor oil, converts electricity into thermal energy without waste, achieving up to a 65% reduction in annual energy consumption! Thanks to our unique induction heating technology, the roll generates heat on its own, enabling high-precision thermal processing with a uniform surface temperature of 1°C or lower. However, even if you understand its high performance, you might think that electric heating rolls are too expensive to consider… But we have achieved a cost reduction of up to 20% compared to our previous models through design improvements and streamlined manufacturing methods! If you are struggling with high running costs, frequent maintenance, or unstable temperature distribution, we encourage you to try our induction heating jacket rolls, now available at a new price. **Four Benefits Leading to Decarbonization and CO2 Reduction:** (1) Over 99% thermal efficiency converts electricity into heat without waste. (2) Electric system requires only a temperature control panel for utilities. (3) Uniform surface temperature distribution reduces defects and improves yield. (4) Clean and low maintenance with no use of water or oil. For more details, please refer to our catalog or feel free to contact us.

Company：トクデン
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-frequency induction heating device for hot forging

Introducing "Billet Heaters" and "Bar Heaters" that can accommodate heat processing methods required in various industries!

The "High-Frequency Induction Heating Device for Hot Forging" is an industrial heating device that uses electricity as its energy source. It can accommodate various thermal processing methods required in different industries, particularly excelling in metal melting, firing of fine ceramics, and thermal treatment of quartz, with a wealth of proven results. We offer products such as the billet heater "FTH-300-3H" with a high-frequency output of 300/3 (kW/kHz) and the bar heater "FTH-250-4H" with 250/4 (kW/kHz). 【Features】 ■ Industrial heating device using electricity as an energy source ■ Capable of accommodating various thermal processing methods required in different industries ■ Particularly rich in proven results for metal melting, firing of fine ceramics, and thermal treatment of quartz ■ Responsible for the entire process from design, manufacturing, installation, adjustment, trial operation, to maintenance in-house *For more details, please refer to the PDF materials or feel free to contact us.

Company：富士電波工業滋賀工場
Price：Other

Incinerators and incinerators
Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Case study at Landmark Tower: Nippon Steel & Sumitomo Metal Corporation

By switching to induction heating using high frequency, we have achieved a reduction in work time, resulting in a shorter construction period! *We will also introduce examples of cost reduction through induction heating using high frequency.

At Nippon Steel & Sumitomo Metal Corporation, we have reduced the heating time for preheating and annealing of steel materials, which were traditionally heated using heaters, to one-sixth by switching to induction heating using high frequency in the equipment located within the Landmark Tower (Yokohama Minato Mirai). Thermal Production Heat is a specialist in heat treatment technology that supports manufacturing from behind the scenes. We respond to various customer needs, focusing on preheating and annealing during welding, with a variety of approaches. [Case Study] ■ Nippon Steel & Sumitomo Metal Corporation ■ Changed preheating and annealing of steel materials from traditional heaters to induction heating using high frequency ■ Reduced heating time to one-sixth *For more details, please refer to the PDF document or feel free to contact us.

Company：熱産ヒート本社
Price：Other

Industrial Furnace
Other services
Welding Machine
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Solution Case] Multiple Major Steel Companies

Solve safety and heating unevenness in burn-out and burn-in construction with high-frequency induction heating!

In major steel-related companies, the challenges of using gas heating (burners) for annealing and shrink fitting work—specifically safety and uneven heating—were resolved by implementing high-frequency induction heating. Additionally, by achieving uniform heating without temperature variations, the success rate also improved. Thermal Production Heat is an expert in heat treatment technology that supports manufacturing from behind the scenes. We respond to various customer needs, primarily focusing on preheating and annealing during welding, with a range of approaches. [Case Studies] ■ Multiple major steel-related companies ■ Resolved safety and heating unevenness through high-frequency induction heating ■ Improved success rate *For more details, please refer to the PDF materials or feel free to contact us.

Company：熱産ヒート本社
Price：Other

Industrial Furnace
Other services
Welding Machine
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Power ZS Linear Heater

The heating flame (white spot) is long, and the marking line is easy to see! Suitable for heating plates with a thickness of 12mm to 50mm.

This product is a high-power ZS linear heater suitable for heating plate thicknesses from 12mm to 50mm. It is lightweight and easy to grip, and the heating flame (white point) is long, making the marking lines easy to see. In addition, we also offer the "High Power MOXA S," which is suitable for heating plate thicknesses from 5.0mm to 50mm. 【Features】 <High Power ZS Linear Heater> ■ Lightweight and easy to grip ■ Long heating flame (white point) for easy visibility of marking lines ■ LPG dedicated nozzle ■ Suitable for heating plate thicknesses from 12mm to 50mm *For more details, please refer to the PDF document or feel free to contact us.

Company：日酸TANAKA 産業機器事業部
Price：Other

Other work tools
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Small/Medium LPG Heater (Centralized Type)

Set of 3 Tsuru and a dedicated LPG heating device suitable for heating steel plates, bending plates, correcting distortions, and brazing.

We would like to introduce our small and medium-sized LPG heaters (centralized type). The "Small LPG Heater (Centralized Type)" is suitable for heating plate thicknesses from ultra-thin to 9.0mm, while the "Medium LPG Heater (Centralized Type)" can accommodate heating for plate thicknesses from ultra-thin to 20mm. In addition, we also offer the "HW-50 LPG Heater (Diffused Type)," which is ideal for heating steel plates with thicknesses from ultra-thin to 20mm, as well as for plate bending, distortion correction, and brazing. 【Features】 <Small LPG Heater (Centralized Type)> ■ Plate thickness: Suitable for heating from ultra-thin to 9.0mm ■ Heating blowpipe for brazing, suitable for seated work and fixing ■ Set of three nozzles *For more details, please refer to the PDF document or feel free to contact us.

Company：日酸TANAKA 産業機器事業部
Price：Other

Other work tools
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contracted experimental services for ultra-high temperature heating at 3000℃.

Please use this for preliminary verification of equipment considerations! We also accept contract manufacturing for small lots.

At Daiichi Kiden Co., Ltd., we accept commissioned experiments and can conduct heating experiments above 3000°C in an inert atmosphere using a high-frequency induction heating power supply with a carbon crucible. By utilizing high-frequency induction heating, we achieve a heating rate of 3000°C/h and employ power control that offers good reproducibility and stability. Additionally, accurate temperature measurement is possible with a two-color radiation thermometer. 【Experiment Specifications】 ■ Heating Temperature: Up to 3000°C ■ Atmosphere: Inert gas atmosphere at atmospheric pressure after vacuum evacuation ■ Recommended Crucible: Carbon, inner diameter φ50(t2)xH48mm ■ Hot Zone: Carbon molded insulation material ■ Heating Method: High-frequency induction heating ■ Heating Rate: 1 to 3000°C/h *For more details, please refer to the PDF document or external link page, or feel free to contact us.

Company：第一機電
Price：Other

Other contract services
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heating device "Joule Heating Mini Pack Heater"

A heating device that causes minimal damage to food with Joule heating.

The "Joule Heating Mini Pack Heater" is a heating device that enables a higher level of heating treatment with minimal thermal damage due to its ability to rapidly increase temperature. Thanks to Joule heating, it can raise the temperature from 40°C to 90°C in under 3 seconds. Additionally, it has a heating volume of less than 500cc, which is not available in conventional devices, allowing for manufacturing with minimal liquid loss even in lines with frequent product changes. Moreover, it is compatible with CIP cleaning and can be manually washed without the use of tools. 【Features】 ■ Rapid and uniform temperature increase ■ Reduced heating damage ■ Increased yield with minimal device volume ■ Linked to the start-stop operation of packaging machines ■ Easy disassembly for cleaning *For more details, please contact us or download the catalog.

Company：フロンティアエンジニアリングつくば研究所
Price：Other

Other heating equipment
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

『MAGHEAT』 Application Example: Preheating of Aluminum Ingots at the Melting Plant

By preheating the aluminum ingots to 450℃ to 500℃ and then charging them into the melting furnace, it is possible to achieve complete melting in the furnace in about 10 minutes!

Our "MAGHEAT" is a magnetic induction heating device that generates induced currents in non-ferrous metals by moving magnets, utilizing the resulting Joule heat for heating. It employs a motor as a power source, allowing for reduced power consumption. [Application Example: Preheating Aluminum Ingots in Aluminum Melting Plants] Recently, attention has been drawn to preheating ingots to approximately 450°C to 500°C with "MAGHEAT" before introducing them into the molten bath. Currently, ingots at room temperature are being introduced into tower-type melting furnaces, causing them to drop to the bottom of the molten bath upon entry, damaging the furnace floor and generating a large amount of oxides. For a 10 kg ingot, it is said to take about one hour to dissolve in the molten bath. By introducing preheated ingots at 450°C to 500°C, it is possible to achieve complete melting of the entire bath within 5 to 10 minutes. In gas furnaces, the preheating temperature is "MAX 250°C," whereas with MAGHEAT, a preheating temperature of around "500°C" is achievable. *For more details on this application example, please refer to the materials available for download below "PDF Download."

Company：TSK
Price：Other

Other metal materials
Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plasma Sintering Device "Cyclic Plasman"

General SPS sintering as well! It is possible to apply periodic load and current during electric sintering.

We would like to introduce the plasma sintering device "Cyclic Plasma" handled by Techno Environmental Equipment Co., Ltd. It is capable of applying periodic loads and current during electric sintering, and general SPS sintering is also possible. Additionally, there are expected effects from the periodic load application, such as the control of the microstructure of materials with anisotropy in physical properties and the potential for performance improvement. 【Expected Effects of Periodic Load Application】 ■ Possibility of producing high-density sintered bodies at low temperatures using standard SPS ■ Potential for microstructure control of materials with anisotropic physical properties and performance enhancement *For more details, please download the PDF or feel free to contact us.

Company：テクノ環境機器本社
Price：Other

Other processing machines
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

List of Equipment Owned by Ito Heat Treatment Co., Ltd.

[Heat Treatment Equipment] Leave all matters related to heat treatment to us. We have one of the largest facilities in the Tohoku region! We can meet the diverse needs of our customers.

Ito Heat Treatment Co., Ltd. is equipped with a variety of facilities to tailor products to meet customer requirements, allowing us to make optimal proposals that align with your needs. If it's heat treatment, please leave it to us. 【List of Heat Treatment Equipment】 ■ Rod High-Frequency Quenching Equipment * The introduction of robots enhances productivity, reduces costs, and strengthens price competitiveness. ■ High-Frequency Induction Heating Equipment * It can harden only the necessary parts, achieving high surface hardness and excellent wear resistance. ■ Superior Batch-Type Gas Nitriding Furnace * Gas cooling allows for no subsequent processes and enables short delivery times. ■ Medium Salt Salt Bath * Direct heating minimizes deformation and reduces the risk of cracking. ■ Black Oxide * It provides rust resistance, is cost-effective, minimizes dimensional changes, and is resistant to peeling. ■ Drip-Type Gas Carburizing Furnace * It allows for the "tempering" and "annealing" of materials. ■ Vacuum Heat Treatment Furnace * It prevents oxidation and decarburization, resulting in high hardness and excellent wear resistance. ■ Gas Nitriding Furnace * It improves fatigue strength and corrosion resistance. For more details, please feel free to contact us.

Company：伊藤熱処理
Price：Other

Heating device
Processing Contract
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heating device "Chamber Unit"

Implementing accurate and precise temperature control, suitable for cleanliness due to a structure that can withstand the production environment.

The "Chamber Unit" is a heating device that meets the demands for precise temperature control and temperature uniformity in industrial processes. It can supply the necessary heat for industrial processes and operate in ambient or controlled atmospheres. Please feel free to contact us if you have any inquiries. 【Applications】 ■ Semiconductor and FPD manufacturing ■ Special materials manufacturing ■ Medical and chemical equipment ■ Electrical appliances *For more details, please download the PDF or feel free to contact us.

Company：IPC
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HIGH POWER Mold Heater

To streamline on-site operations and improve safety and productivity.

In the casting process where melted aluminum is poured into molds and cooled to produce solid products, it is necessary to preheat the molds to stabilize product quality and protect the molds. This time, at Suzuki Corporation's Sagara Plant, we changed the mold heating process of the casting machine for engine casting parts from the conventional gas burner heating to a mold heater using high-output infrared heaters. This introduction has significantly improved energy efficiency, reduced labor and enhanced safety and productivity compared to the conventional gas burner heating. Awarded the 2015 Energy Conservation Grand Prize (Energy Conservation Case Category) by the Minister of the Agency for Natural Resources and Energy. Theme: Energy conservation and labor saving through the introduction of infrared heater-type mold heaters in the casting factory.

Company：メトロ電気工業
Price：Other

Heating device
Heating device

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Crankcase for Engine / Drying Process After Painting

A case where a labor cost reduction of 5,760,000 yen was achieved through a conversion of 3,000 yen/hour × 1,920 hours!

We introduced our induction heating device into the drying process after painting the crankcases for engines in a case study from the automotive manufacturing industry. We aimed to shorten the drying process and reduce the labor hours of the staff involved. As a result, the previously time-consuming drying process transformed into a production environment that is almost unmanned. This achieved a reduction of approximately 1,920 hours of operational time per year and a decrease in labor costs. 【Case Overview】 ■Initiatives - Introduced our induction heating device into the drying process after painting the crankcases for engines - Shortened the drying process and reduced the labor hours of the staff involved ■Results - The time-consuming drying process changed to a production environment that is almost unmanned - Reduced operational time by approximately 1,920 hours per year This translates to a labor cost reduction of 5,760,000 yen (3,000 yen/hour × 1,920 hours) *For more details, please download the PDF or feel free to contact us.

Company：IH電子
Price：Other

Heating device
Other heating equipment
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-cooled electromagnetic induction heating device for bearing shrink fitting 'IHT-600KDN'

Economical with low power consumption! Water-cooled electromagnetic induction heating device for bearing shrink fitting.

The "IHT-600KDN" is a water-cooled electromagnetic induction heating device for bearing shrink fitting. Our "low-frequency induction heating device" utilizes a frequency range of ultra-low frequencies from 0.2KHz to 1KHz. It is a device that can heat materials from deep within due to the synergistic effect of magnetic induction and eddy currents (electron collisions), while maintaining a low capacity. The heated objects can include all metals such as iron, steel, copper, brass, cast iron, aluminum, stainless steel, and more. 【Features】 ■ For bearing shrink fitting ■ Sequencer system ■ Shorter heating time compared to electric and gas furnaces ■ Low power consumption, economical ■ Compact *For more details, please refer to the PDF document or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Double Position Water-Cooled Electromagnetic Induction Heating Device 'IHEM-2PHS'

Low power consumption and economical! Double position water-cooled electromagnetic induction heating device.

"IHEM-2PHS" is a double-position water-cooled electromagnetic induction heating device. Our "low-frequency induction heating device" operates within a frequency range of ultra-low frequencies from 0.2 kHz to 1 kHz, utilizing the synergistic effect of magnetic induction and eddy currents (electron collisions) to heat materials from deep within with low capacity. The heated materials can include all metals such as iron, steel, copper, brass, cast iron, aluminum, and stainless steel. [Features] ■ Double-position type ■ Shorter heating time compared to electric and gas furnaces ■ Low power consumption, economical ■ Compact *For more details, please refer to the PDF document or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gear side bearing component induction heating device "IHD-55K-45M"

Induction heating device for gear side bearing parts of gear units with lower heating core lifting function!

The "IHD-55K-45M" is an induction heating device for gear side bearing components used in gear units. Our "low-frequency induction heating device" utilizes a frequency range of ultra-low frequencies from 0.2 kHz to 1 kHz. It is a device that can heat materials from deep within due to the synergistic effect of magnetic induction and eddy currents (electron collisions), while maintaining a low capacity. The items to be heated can include all metals such as iron, steel, copper, brass, cast iron, aluminum, stainless steel, and more. 【Features】 ■ For gear units ■ Equipped with a lifting function for the lower heating section's iron core ■ Shorter heating time compared to electric and gas furnaces ■ Economical with low power consumption ■ Compact *For more details, please refer to the PDF document or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-cooled low-frequency induction heating device for rotor shaft burning and fitting IHL-1PH-M

Work pressure infrared radiation temperature sensor included! Water-cooled low-frequency induction heating device.

The "IHL-1PH-M" is a water-cooled low-frequency induction heating device for rotor shaft shrink fitting. Our "low-frequency induction heating device" operates within a frequency range of ultra-low frequencies from 0.2 kHz to 1 kHz, utilizing the synergistic effect of magnetic induction and eddy currents (electron collisions) to heat materials from deep within with low capacity. The heated objects can include all metals such as iron, steel, copper, brass, cast iron, aluminum, stainless steel, and more. 【Features】 ■ For rotor shaft shrink fitting ■ Equipped with a workpiece pressing infrared radiation temperature sensor ■ Shorter heating time compared to electric and gas furnaces ■ Low power consumption and economical ■ Compact *For more details, please refer to the PDF document or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-cooled low-frequency induction heating device as an alternative to high-frequency induction heating.

Easy to operate due to the touch panel system! Water-cooled low-frequency induction heating device for angular bearing shrink fitting.

Compared to high-frequency induction heating, the heating time is shorter, power consumption is lower, and there are significant economic benefits. The electricity consumption capacity is about 1/3 to 1/4 of that of high-frequency induction heating and electric furnaces, achieving cost reduction! The "IHI-140B-D" is a water-cooled low-frequency induction heating device for shrink fitting angular bearings. Our "low-frequency induction heating device" uses a frequency range of ultra-low frequency 0.2 kHz to 1 kHz, and through the synergistic effect of magnetic induction and eddy currents (electron collisions), it can heat materials from deep within at low capacity. The heated objects can include all metals such as iron, steel, copper, brass, cast iron, aluminum, and stainless steel. 【Features】 ■ For shrink fitting angular bearings ■ Touch panel operation ■ Shorter heating time compared to electric and gas furnaces ■ Economical with low power consumption ■ Compact *For more details, please refer to the PDF materials or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic height-adjustable water-cooled induction heating device 'IHM-300-1P-600S'

Energy-efficient with low power consumption! Water-cooled induction heating device with automatic height adjustment.

The "IHM-300-1P-600S" is an automatic lift water-cooled induction heating device for heating stator casings. Our "low-frequency induction heating device" utilizes a frequency range of ultra-low frequencies from 0.2 kHz to 1 kHz, and through the synergistic effect of magnetic induction and eddy currents (electron collisions), it is capable of heating materials from deep within with low capacity. The heated objects can include all metals such as iron, steel, copper, brass, cast iron, aluminum, stainless steel, and more. 【Features】 - For heating stator casings - Shorter heating time compared to electric and gas furnaces - Economical with low power consumption - Compact *For more details, please refer to the PDF document or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-cooled low-frequency induction heating device as a substitute for electric furnaces and gas furnaces.

Have you ever experienced that you can't heat deeply enough? Introducing a water-cooled low-frequency induction heating device as an alternative to high-frequency induction heating.

The "IHH-40-CN" is a water-cooled low-frequency induction heating device that automatically shrinks the stator onto AC workpieces heated by an indexing method. Our "low-frequency induction heating device" uses a frequency range of ultra-low frequencies from 0.2 kHz to 1 kHz, and through the synergistic effect of magnetic induction and eddy currents (electron collisions), it can heat materials from deep within with low capacity. The heated objects can include all metals such as iron, steel, copper, brass, cast iron, aluminum, and stainless steel. 【Features】 ■ Induction heating coil with a lifting mechanism ■ Uses water-cooled coils (cooling is done by a unit cooler) ■ Shorter heating time compared to electric and gas furnaces ■ Low power consumption and economical ■ Compact *For more details, please refer to the PDF materials or feel free to contact us.

Company：協同電磁機工業
Price：Other

Heating device
Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heating device Product List and Ranking from 142 Manufacturers, Suppliers and Companies | IPROS GMS

Heating device Manufacturer, Suppliers and Company Rankings

Heating device Product ranking