We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heating device.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Heating device Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.

Heating device Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.

  1. 富士電子工業 Osaka//Industrial Machinery
  2. 第一高周波工業 新事業推進部 営業部 Tokyo//Industrial Machinery
  3. 山本ビニター Osaka//Industrial Machinery
  4. 4 トクデン Kyoto//Industrial Electrical Equipment
  5. 5 ウシオ電機 Tokyo//Industrial Electrical Equipment
Go to Company Ranking

Heating device Product ranking

Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.

  1. High-frequency quenching equipment subsidy program 富士電子工業
  2. Martensite and residual austenite 富士電子工業
  3. Adfos NIR: Super Near-Infrared Heating Device 松本金属工業
  4. 4 Boiler tube extraction device for heat exchanger tubes 第一高周波工業 新事業推進部 営業部
  5. 5 Light Application Heating Device "Flash Lamp Annealing Device" ウシオ電機

Heating device Product List

181～195 item / All 419 items

Displayed results
IH-type low-floor heater

IH-type low-floor heater

High-power IH electromagnetic heating. Temperature controllers, timers, and water supply ports can also be installed.

When current flows through the induction heating coil under the plate, magnetic field lines are generated, and it is this magnetic field that heats the pot itself. Since induction heating directly heats the pot, there is almost no energy loss, making it highly cost-effective in terms of fuel efficiency (for boiling 20 liters of water under the same conditions: Daihan IH cooker 48.7 yen, time taken 12 minutes; gas flame 86.5 yen, 17 minutes). Furthermore, it does not use dangerous and troublesome open flames, resulting in less air pollution and excess heat, allowing heating and cooling systems to operate very efficiently, thereby keeping air conditioning costs low. Additionally, it saves on overall initial costs due to lighter duct and air conditioning equipment, as well as ongoing running costs such as water bills (which can be reduced by nearly 40% due to dry factory operations). With easy control via an electronic control panel, it significantly reduces the number of workers needed, achieving savings in labor costs as well.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Handheld Induction Heating Device 'TS-100/12H'

Handheld Induction Heating Device 'TS-100/12H'

No special skills required! Even beginners can work in a short amount of time.

The "TS-100/12H" is a handheld coil head type high-frequency induction heating device. Due to its design that allows the coil part to move freely, it can accommodate soldering in tight spaces and approaches from various angles. It is compact, lightweight, highly efficient, and stable, eliminating the need for special skills like those required for traditional gas soldering, allowing even inexperienced users to complete tasks in a short time. 【Features】 ■ Movable coil heating section ■ Compact and lightweight ■ Soldering work possible in a short time even for inexperienced users ■ High reliability and stability achieved through microprocessor control ■ Technical information and support provided online through user registration *For more details, please refer to the PDF materials or feel free to contact us.

  • Welding Machine
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small high-frequency induction heating device 450kHz/900kHz/1.8MHz

Small high-frequency induction heating device 450kHz/900kHz/1.8MHz

【*Free heating tests available!】 Temperature control, feeder, sensors, etc. are integrated into one unit! A high-frequency induction heating device with a coil head separation type that achieves ultra-compact size!

The "Power Cube" is a super compact high-frequency induction heating device, available in a series that supports various frequencies such as 450kHz, 900kHz, and 1.8MHz. We can provide surrounding components such as temperature control, feeders, and sensors all together, resulting in minimal loss and achieving a super compact design. Additionally, the coil head can be separated, making installation and replacement easy. ◎ We offer free heating tests for those who are interested. 【Features】 ◆ Achieves super compact design with all-in-one temperature control, feeders, sensors, etc.! ◆ The separation of the coil head allows for flexible installation without taking up space! Easy sensor replacement! ◆ Simple settings for output, timing, and cycle control on the controller panel. ◆ Centralized control via Ethernet possible with multiple units. * If you wish to request a free heating test, please include "Test Request" in your inquiry. * For the catalog of "Compact High-Frequency Induction Heating Devices," please view the PDF data available for download.

  • Other heaters
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Heating Device] Advantages and Applications of Microwave Heating

[Heating Device] Advantages and Applications of Microwave Heating

Advantages and Applications of Radio Frequency Heating (High-Frequency Dielectric Heating and Microwave Heating)

A next-generation key technology that dramatically streamlines and reduces labor in the heat treatment process, which is indispensable in all manufacturing processes. The role of microwave heating is even greater, and its application areas are showing limitless expansion. It is not just about improving work efficiency; microwave heating opens the way for system upgrades that incorporate the cleaning of factory environments and labor-saving measures, which is why its application value can be said to be infinite.

  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency woodworking machine for board peeling, framing, and edge banding processing.

High-frequency woodworking machine for board peeling, framing, and edge banding processing.

Board jointing, framing, and edge banding processing (Panex series)

High-frequency mini board edge gluing machine, high-frequency board edge gluing and framing machine, high-frequency panel processing gluing machine, high-frequency continuous board edge gluing machine.

  • Wood processing machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency ceramic industry outer wall corner bonding machine "Worex"

High-frequency ceramic industry outer wall corner bonding machine "Worex"

No need for a health maintenance space! Processing can be done immediately after bonding, allowing for short delivery times.

"Worex" is a high-frequency ceramic exterior corner adhesive machine that allows for the next material to be set during heating with a rotary design. By setting it in a V shape and heating it in an inverted V shape, it becomes easier to align the peaks. After adhesion, the amount of adhesive that sticks to the product is reduced, minimizing finishing work. Additionally, the upper part of the machine is designed with ample space, making it easy to install automatic feeding and extraction devices in the future. 【Features】 ■ Complete adhesion in a short time due to high-frequency heating ■ Adhesion possible with a small amount of adhesive application ■ No curing space required ■ Stability in strength and quality by performing high-frequency heating under pressure ■ Immediate processing after adhesion, enabling short delivery times *For more details, please refer to the PDF document or feel free to contact us.

  • Wood processing machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency compact heating bonding machine

High-frequency compact heating bonding machine

Portable! Lightweight high-frequency compact heating adhesive machine with 100V power supply.

At Yamamoto Binita Co., Ltd., we offer a handy, portable high-frequency compact heating adhesive machine. It allows for spot adhesion with just one touch. Additionally, it comes standard with an automatic tuning device, eliminating the need for cumbersome adjustments. 【Features】 ■ Usable with a household power supply of 100V ■ The tip iron part and gun can be exchanged with one touch ■ Equipped with an automatic tuning device as standard, no troublesome adjustments required ■ No preheating needed; heating work can be performed immediately after powering on *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Heating Device] Insecticidal treatment of grains and spices using a microwave heating device?

[Heating Device] Insecticidal treatment of grains and spices using a microwave heating device?

Insect pest control through internal heating using electromagnetic waves. This is a heating method that achieves high quality and short time.

◆ Microwave heating allows for simultaneous temperature rise and stabilization of temperature both internally and externally. ◆ Since it is a short-time process, it is also possible to handle small quantities of various types. We offer a variety of equipment, from continuous systems for large-scale processing to small batch systems for small-scale processing. For more details, please contact us or refer to the catalog.

  • FMH-12(S160318・S160319）.jpg
  • Food environmental hygiene/contamination prevention equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Heating Device] Microwave Heating Device (Batch Type)

[Heating Device] Microwave Heating Device (Batch Type)

A heating device that is compact and heats in a short time.

Microwave heating devices, unlike external heating, heat products uniformly from the inside using electromagnetic waves, making them suitable for heating even large solids that are difficult to warm through to the center. Additionally, they can be used not only for heating applications but also for drying, sterilization, puffing, and pest control. 【Examples of Implementation】 〇 Preheating before frying in a fryer 〇 Preheating in confectionery processing 〇 Puffing heating of deep-fried foods 〇 Secondary sterilization of processed seafood (grilled fish) 〇 Drying of fresh bread crumbs We offer custom solutions tailored to your installation environment and space requirements. 【Testing Available】 ● For more details, please contact us or refer to the catalog.

  • Food Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Heating Device] Secondary sterilization with microwave heating devices? Reducing food waste!

[Heating Device] Secondary sterilization with microwave heating devices? Reducing food waste!

A compact and time-efficient sterilization device. It contributes to food waste reduction.

By performing secondary sterilization through heating with a microwave sterilization device, we achieve long shelf life for food, contributing to the reduction of food waste and addressing SDGs challenges. 【Implementation Examples】 〇 Sterilization of grilled fish: Can be sterilized with short heating time 〇 Sterilization of boiled shirasu: Can be sterilized even after packaging 〇 Sterilization of prepared foods: Long shelf life for products through secondary heating sterilization Unlike external heating, microwaves heat uniformly from inside the product, preventing excessive heating of the surface. The device will be custom-made according to the installation environment and space. ● For more details, please contact us or refer to the catalog.

  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] You can melt candies and caramels with the thawing device!

[Case Study] You can melt candies and caramels with the thawing device!

Even poorly formed candies can be melted down without compromising quality. Achieve zero waste!

Uniform heating using high frequency allows for the re-heating and melting of improperly formed candy. By reusing the melted candy, we can eliminate waste loss due to molding defects. **Advantages of High Frequency Heating** - Unlike external heating, melting can be achieved in a short time (3 to 10 minutes) without being affected by thickness. - There is less temperature variation, allowing for reuse without compromising flavor. - The equipment operates solely on electricity, requiring no water or air, making it easy to set up. **Testing Available** - On-site experiments: We will conduct tests at our factory with the customer's presence. You can confirm the short-time and high-quality heating with the high frequency heating equipment. - Sample submission experiments: We will conduct tests using the raw materials and samples sent by the customer. The results will be compiled and reported later. For more details, please download the catalog or contact us.

  • 解凍シーン.jpg
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Heating Example] How is the heating and drying of breadcrumbs done with a high-frequency defrosting device?

[Heating Example] How is the heating and drying of breadcrumbs done with a high-frequency defrosting device?

By using internal heating with radio waves, we achieve high-quality heating and drying without compromising the flavor of the breadcrumbs.

High-frequency heating, unlike external heating such as gas flames, allows for internal heating using radio waves, enabling quick and uniform heating and drying. 【Advantages of High-Frequency Heating】 - It is less likely to compromise flavor compared to gas flames, allowing for high-value-added heating and drying. - Inline processing is possible through continuous treatment. - The heating and drying time can be adjusted by changing the set output. - The equipment operates solely on electricity, requiring no water or air, making it easy to set up. 【Testing Available】 - On-site experiments: We will conduct tests at our factory with the customer's presence. You can confirm the quick and high-quality heating with the high-frequency heating equipment. - Sample submission experiments: We will conduct tests using the raw materials and samples sent by the customer. Results will be compiled and reported later. For more details, please download the catalog or contact us.

  • 無題.png
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency compact heating adhesive machine <Techno Gun/Techno Iron type>

High-frequency compact heating adhesive machine <Techno Gun/Techno Iron type>

Can be used with a household power supply of 100V! The tip iron part can be easily exchanged with a one-touch gun.

This product is a lightweight, portable high-frequency compact heating adhesive machine that operates on a 100V power supply. It comes standard with an automatic tuning device, eliminating the need for troublesome adjustments. No preheating is required, so you can start heating work immediately after turning on the power. It can be used for edge bonding, fastening bonding, corner bonding, and for bonding wood, paper, and cardboard. 【Features】 ■ Usable with a household 100V power supply ■ The tip iron and gun can be exchanged with a single touch ■ No preheating required; you can start heating work immediately after turning on the power ■ Comes standard with an automatic tuning device, eliminating the need for troublesome adjustments *For more details, please refer to the PDF document or feel free to contact us.

  • image_22.png
  • image_23.png
  • Wood processing machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Achievements in the use of high frequency in the automotive industry.

Achievements in the use of high frequency in the automotive industry.

In the automotive industry, where high quality and high efficiency are required, radio wave heating using high frequency is being utilized. Here, we will introduce some of that technology.

The technology of radio wave heating using high frequency is widely used in the automotive industry. In the automotive sector, not only high quality and high efficiency are required, but also many other functions and performances are demanded from the equipment. This time, to meet those demands, we would like to introduce some of the technologies incorporated into our equipment. This technology is also applied outside the automotive industry, so feel free to consult us from various industries. [Published Information] - Achieves the same finish regardless of who uses it: "Automatic Tuning System" - Protects important molds from sparks - Capable of controlling pressure and thickness regulations with high precision - Improves stability through mold temperature management - Capable of supporting "Traceability"

  • Resin processing machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Attachment Device】Corner processing, easy angle adjustment♪ Ceramic siding edition

【Attachment Device】Corner processing, easy angle adjustment♪ Ceramic siding edition

For those struggling with angle adjustments during corner processing of ceramic siding, we would like to introduce a device that allows for easy adjustments!

Are you having trouble adjusting the angle when aligning materials for adhesion with fiber cement siding? The WALLEX-3AE will solve that problem! The WALLEX series is a device that flows high frequency through the set materials in fiber cement siding, allowing for quick adhesion in a short time. Previous devices required the insertion of thin shims for angle adjustments, but with this device, you can easily make fine adjustments by simply sliding the jig at hand after adjusting the height with spacers to a certain level. (See the video) By reducing the time spent on angle adjustments, it also contributes to an overall increase in productivity! For more details, please visit our company website.

  • WALLEX-3A(3AE)部分(S160387).jpg
  • Other processing machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Heating device

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.