Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 31, 2025～Jan 27, 2026
This ranking is based on the number of page views on our site.
196～210 item / All 752 items
Encoder optical IC. Increases signal resolution by 4 to 8 times.
◆Product Features◆ ~Robot joints, servo motors, semiconductor manufacturing equipment~ ≪4-fold IC≫ ・Increases signal resolution by 4 times ≪8-fold IC≫ ・Increases signal resolution by 8 times
The world's smallest MIL-STD-1553 terminal IC with a transformer integrated into a thin 15×15×4.4mm package.
The HI-2130 is a product that combines the functionality of Holt's HI-6130 16-bit parallel bus interface and HI-6131 SPI device, integrating MIL-STD-1553 protocol logic, dual transceivers, and dual transformers into a single compact package. The slim 15×15×4.4mm HI-2130LBxx is one of the world's smallest single-package 1553 terminals with integrated transformers, making it ideal for use in applications such as switched mezzanine cards (XMC) or PCI mezzanine card (PMC) assemblies. The BGA package is available in both RoHS compliant and Sn/Pb options, providing customers with a solution for Sn/Pb assemblies without the need for expensive re-balling.
The MAMBA series features a 6mm x 6mm MIL-STD-1553 terminal (SPI interface).
The MAMBA series consists of 3.3V CMOS devices that provide a host processor and MIL-STD-1553B bus interface. Each IC includes BC, MT, and RT, allowing for simultaneous operation with any combination of 1553 functions. Valid terminals communicate with the MIL-STD-1553 bus via a shared on-chip dual bus transceiver and external transformers. There are four types based on functionality: - HI-6138: BC, MT, RT - HI-6137: BC, RT - HI-6136: MT, RT - HI-6135: RT Users can allocate 16KByte (8K×17Bit words) of on-chip SRAM between devices according to application requirements. The HI-613x communicates with the host via a 40MHz 4-wire SPI. Programmable interrupts provide terminal status to the host processor.
HOLT has announced the expansion of its MIL-ST-1553 product line with the new HI-6200 family of products.
■Adoption Results ・F-16 – Cockpit display update (HI-6110 adopted) ・A3 Bradley Fighting Vehicle (numerous parts) ・Joint Direct Attack Munition (JDAM) (HI-1567 adopted) ・Commercial use: A-350 flight control (HI-1581 adopted) Additionally, HOLT Corporation holds the world's number one share in ARINC429! The company has over 400 adoption results. ■Japanese technical documentation for MIL-STD-1553 and ARINC 429 communication standards is available. If you would like to see it, please contact sales@nacelle.co.jp.
The HI-3582A/83A is a CMOS device designed to directly connect a 16-bit parallel data bus to an ARINC 429 bus.
The Holt HI-3582A/HI-3583A is a CMOS device designed to directly interface a 16-bit parallel data bus with an ARINC 429 serial bus. Compared to the previous HI-3582/HI-3583 products, the HI-3582A/HI-3583A offers a high-speed host CPU interface. This device provides two receivers with label recognition, a 32×32 FIFO, and an analog line receiver. Up to 16 labels can be programmed for each receiver. The independent transmitter includes a 32×32 FIFO and a built-in line driver. The status of all three FIFOs can be monitored using external status pins or by polling the HI-3582A/HI-3583A status register. Other features include a programmable option for the 32nd bit to be either data or parity, and the ability to unscramble 32-bit words.
HI-35930/31/32/33 is a CMOS device for directly connecting SPI-compatible microcontrollers to the ARINC 429 bus.
The HI-35930 from Holt is a CMOS integrated circuit designed to connect SPI-compatible microcontrollers to the ARINC 429 serial bus. This device features two receivers, each with user-programmable label recognition for any combination of 256 possible labels, a 32×32 receive FIFO, three priority label quick access double buffer registers, and an analog line receiver. Both line receivers meet the lightning protection requirements of RTCA/DO-160G, Section 22, Level 3. The independent transmitter includes a 32×32 transmit FIFO and an integrated line driver. The line driver operates on a single 3.3V power supply and includes an on-chip DC/DC converter that generates the bipolar ARINC 429 differential voltage levels necessary to directly drive the ARINC 429 bus. The status of the transmit and receive FIFOs and the priority label buffer can be monitored using a programmable external interrupt pin or by polling the status register.
>>Overwhelming Share<< HOLT Corporation IC ARINC825 CAN, ARINC717, Serial, Discrete Products
HOLT's ARINC products have the industry's largest lineup, ranging from simple analog bus interface chips like line receivers to protocol ICs with on-chip FIFO and RAM. ■ Japanese technical documents for MIL-STD-1553 and ARINC 429 communication standards are available. If you would like to see them, please contact sales@nacelle.co.jp ■
Achieving high sliding properties and wear resistance without using PTFE: Powder coating material for the food industry.
We have added the PTFE-free 'Iglidur IC-05PF' to our range of powdered coatings for the food industry, which are well-received for various applications, including the sliding parts of packaging machinery. By applying powder coating to conductive components, we can protect frequently used surfaces from wear without the need for additional parts. By replacing coatings that use PTFE, it is possible to achieve high sliding properties and wear resistance without being affected by future PFAS regulations. Additionally, due to its affordable price, there are cases where costs can be reduced. In addition to selling powdered coatings, we also offer coating services at our company.
ELM185 is a laser diode driver (LD driver IC) with an integrated APC (Automatic Power Control) circuit.
**Overview** The ELM185xB is a bipolar structure laser diode driver IC that incorporates an APC circuit consisting of a reference voltage source and an error amplifier. It stabilizes the laser output against changes in supply voltage and temperature using the reference voltage source within the IC. The driver output can drive laser currents of up to 400mA. Due to its compact package, it allows for implementation in a minimal area. As a protective feature, it includes a cutoff circuit for abnormal high temperatures and has the capability to limit the laser drive current in case of control loop failure. The current limit value can be set using an external resistor. It also has a built-in surge-absorbing Zener diode (Vz≈7V) between the power supply (VCC-GND) to prevent laser diode damage. It can drive multiple types of laser diode modules (LDM). Furthermore, it is possible to use the built-in constant current setting function for open-loop constant current driving, rather than driving through APC control, allowing it to be used as an open-loop constant current driver for laser diodes, high-brightness LEDs, and more. *For more details, please refer to the catalog or feel free to contact us.*
![[Motion Control/Robotics] Nova Electronics](https://image.mono.ipros.com/public/product/image/9d6/2001462003/IPROS43057103991025685820.png?w=280&h=280)
We provide embedded products tailored to meet our customers' needs! Customizing Cartesian robots.
We handle products from Nova Electronics Co., Ltd., which develops motion control-related products and robot-related products. We provide embedded products in forms that meet customer needs, including motion control ICs, boards, and units. Our robots, primarily customized desktop-sized Cartesian robots, have received positive feedback from customers. 【Products We Handle】 <MCX500 Series> ■MCX501 ■MCX512 ■MCX514 *For more details, please refer to the related links or feel free to contact us.
1.6MHz, 1A constant current, step-down regulator 'LM3405' for LED power supply
The LM3405 is a 1A constant current buck LED driver designed to provide a simple and highly efficient solution for driving high-power LEDs. It features a 0.205V reference voltage feedback control to minimize power consumption, allowing the current to be set with a single external resistor for driving various types of LEDs. The switching frequency is internally set to 1.6MHz, enabling the use of small surface-mount inductors and capacitors. With current mode control and internal compensation, it is user-friendly and achieves predictable, high-performance regulation across a wide range of operating conditions. This device has a maximum input voltage of 15V and can drive up to three high-brightness LEDs in series with a forward current of 1A, with the forward voltage of a single LED being approximately 3.7V. **Features** - VIN operating range: 3V to 15V - Drives up to five high-brightness LEDs in series at 1A - Thin SOT-6 package - Switching frequency: 1.6MHz - LED enable and PWM dimming via EN/DIM input - 300mΩ NMOS switch *For more details, please contact us.*
The UCC5320 is a high CMTI, configurable single-channel isolated IGBT gate driver.
The UCC5320 is supplied in an 8-pin SOIC (D) package. This package has a creepage distance and clearance of 4mm, supports an isolation voltage of up to 3kVRMS, and is suitable for applications requiring basic insulation. With various options and a wide power range, the UCC5320 is suitable for motor drives and industrial power supplies. The UCC5320S features a split output that can be used to control the rise and fall times of the driver. The UCC5320M option connects the transistor gate to an internal clamp, preventing accidental power-on due to mirror current. The UCC5320E option includes UVLO2 referenced to GND2, making it easier to create bipolar power supplies. 【Features】 ■ Peak current: up to 4.3A ■ Input voltage range: 3 to 15V ■ Output driver supply voltage range: 13.2 to 33V ■ Supports isolation voltage of up to 3kVRMS ■ CMOS input *For more details, please contact us.
Programmable Nanopower Dual-Channel Sensor Monitor 'ADS7142'
A standalone Nanopower sensor monitor ideal for designs with strict cost constraints. It autonomously monitors signals while optimizing the system's power, reliability, and performance. Using a comparator with a digital window, it implements event-triggered interrupts for each channel, allowing programming of high/low thresholds, hysteresis, and event counters. It features a dual-channel analog multiplexer in front of a successive approximation register ADC, and an internal data buffer for converting and capturing data from the sensor. The ADS7142 is supplied in a 10-pin QFN package measuring 1.5mm x 2mm. With a power consumption of only 900nW and a small size, it is ideal for applications with strict space constraints and battery-powered applications.
4-channel capacitance/digital converter for capacitive sensing "FDC1004"
Capacitive sensing using ground capacitors and sensors is a non-contact sensing technology with ultra-low power consumption, low cost, and high resolution, applicable in a wide range of applications from proximity detection and gesture recognition to raw material analysis and remote liquid level sensing. Since any metal or conductor can be used as a sensor in the capacitive sensing system, it enables low-cost and highly flexible system design. Each channel of the 'FDC1004' has a full-scale range of ±15pF and can accommodate sensor offset capacitance of up to 100pF. For tracking environmental changes across the entire time/temperature range, it allows for internal programming and can also use external capacitors. The large offset capacitance makes it suitable for remote sensors. Additionally, it features a shield driver for sensor shielding, enabling reduction of EMI interference and focusing the sensing direction of the capacitive sensor. Its small footprint makes it ideal for applications with space constraints. It is available in a 10-pin WSON/VSSOP package and includes an I2C interface for interfacing with MCUs. Evaluation modules and reference designs are also available.
1-channel, rail-to-rail input, micro-power low voltage comparator 'TLV7011'
Ideal for portable/battery-powered devices with strict space constraints. This is a single-channel micro-power comparator that operates at low voltage and has rail-to-rail input capability. It offers an excellent combination of speed and power consumption, with a propagation delay of 260 ns and a quiescent current of 5 μA. This high response time, combined with micro-power consumption, allows for quick responses to fault conditions even in power-limited systems. The operating voltage range is 1.6V to 5.5V, making it compatible with 3V and 5V systems. There is no phase inversion of the output for overdrive inputs, and it features internal hysteresis. It is ideal for accurate voltage monitoring when there is a need to convert slowly varying input signals into clean digital outputs in harsh and noisy environments. It has a push-pull output stage, capable of sinking and sourcing several milliamps of current when controlling LEDs or driving capacitive loads. The package is an ultra-small leadless package measuring 0.8mm x 0.8mm.
