Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
376～390 item / All 675 items
Inspect internal foreign objects from both sides in a single pass with a depth of field 6000 times greater than conventional methods.
We will introduce the automatic appearance inspection case of "glass and resin plates" by Technos Corporation.
It is possible to inspect for cracks and fissures despite variations in products due to differences in baking conditions.
We will introduce the automatic appearance inspection case of "ceramic tiles" by Technos Corporation.
Inspecting a field of view of 1,200mm with a single camera.
The Technos Neuro Visual Sensor "Super 5000K" is the world's highest precision automatic appearance inspection system, based on a principle completely different from conventional inspection devices, applying the function of human eye nerve cells to electronic circuits. Its accuracy far exceeds that of the human eye, boasting 116.5 times the visual accuracy for fine defects such as scratches and foreign objects, and 100 times the visual accuracy for low-contrast defects like color unevenness.
The revolution of visual inspection, the eye's neuro. TechnoS will evolve yet another era.
Since the 1980s, Technos has focused on the functions of the human eye, converting the structure, movements, and functions of retinal nerve cells into electronic circuits using its unique technology, and has introduced the automatic inspection device "Neuro Visual Sensor" that ensures zero omissions. This booklet provides an easy-to-understand explanation of some of the appeal of the "Neuro Visual Sensor."
Achieving quality full inspection and equipment diagnosis through inline constant monitoring of production equipment!
The "Mold Press Processing State AE Inspection System" continuously monitors and evaluates AE signals released due to the occurrence and progression of mold/product anomalies through inline inspection, ensuring 100% inspection. Sensors are primarily installed on the stationary part, the lower mold, to detect AE propagation signals from the upper mold and the product. A gate is established at the timing when the target anomaly occurs, and the occurrence of anomalies is determined from the changes in the AE parameters and waveform shapes within this gate. 【Features】 ■ Continuous monitoring and evaluation of AE signals for 100% inspection ■ Distinct AE signals generated during each processing stage → Understanding processing conditions from AE characteristics ■ Determining the occurrence of anomalies from changes in AE parameters and waveform shapes *For more details, please refer to the related link page or feel free to contact us.
Real-time AE measurement during welding! Detection and judgment through inline continuous monitoring, with 100% inspection.
We would like to introduce our "Laser Welding Process AE Inspection System." This inspection system evaluates the melting condition during laser welding by measuring AE in real-time during the welding process. It detects and determines product bonding defects caused by abnormalities in laser output through inline continuous monitoring, ensuring 100% inspection. Additionally, defects such as blowhole issues after welding can also be detected by applying stress to the welded product, allowing for AE inspection. 【Features】 ■ Evaluates the melting condition during laser welding ■ Detects and determines through inline continuous monitoring, ensuring 100% inspection ■ Defects such as blowhole issues after welding can also be detected by applying stress to the welded product, enabling AE inspection *For more details, please refer to the related link page or feel free to contact us.
We will detect and determine abnormal AE signals caused by grinding burn through inline continuous monitoring and conduct a full inspection!
This is an introduction to our "Crankshaft Grinding Defect AE Inspection System." This inspection system detects and determines abnormal AE signals caused by grinding burns through continuous inline monitoring, performing 100% inspection. Our company has ventured into the design and manufacturing of new electronic devices, including solar cells, and has made significant progress not only in trading functions but also in the manufacturing sector, achieving a wide range of activities both domestically and internationally. Please feel free to consult us when needed. *For more details, please refer to the related link page or feel free to contact us.*
Are you considering automating the inspection of distortions and shrinkage in transparent glass, resin, and films? Here's good news for those who think it's difficult without visual inspection!
In the inspection of transparent glass, resin products, and films, have you ever been turned down for the introduction of automatic inspection due to the difficulty of detection? By innovating imaging methods and lighting, it has become possible to inspect transparent materials that were difficult to detect with conventional image processing systems. If you are looking for automatic inspection for products like glass and films, this is a feature you should definitely check out! If you are having trouble with automatic inspection of transparent materials like glass and films, please feel free to consult with us. *First, we will verify whether the work you wish to inspect is feasible. *For more details, please download the materials and check them.
A system for inspecting shorts and burrs on the peripheral parts while rotating the workpiece, featuring a separate conveyor device for the automated introduction of visual inspection in the manufacturing line!
Would you like to switch from "visual inspection" to "automated inspection using cameras" for necessary inspections such as "variety identification," "shorts," "burrs," "black spots," "gas burns," and "bubbles" in rod-shaped resin molded products? We would like to introduce a case where a dedicated inspection device was created and implemented separately from the manufacturing line. In this system, when a workpiece is fed into the product input section, it is sent out one by one, and the inspection of the outer circumference of the rod-shaped product is conducted. If any defects are found, they are separately discharged for classification. 【Features of this system】 ■ A dedicated inspection device is created and operated separately from the manufacturing line. ■ By rotating the workpiece during inspection, the entire workpiece is inspected. ■ If any defects are detected, defective products are discharged separately. ■ The device can be modified according to the inspection requirements. *First, we will verify whether the workpieces you wish to inspect can be inspected. *Detailed processing information and flow are included in the PDF.
A case study of the automation of appearance inspection, where a transport device was also manufactured separately from the production line to check for scratches, dents, and dirt on the outer diameter, inner diameter, and surface!
Would you like to switch from "visual inspection" to "automated inspection using cameras" for necessary inspections of small round metal parts, such as "scratches," "chips," "dents," and "dirt"? We would like to introduce a case where a dedicated inspection device was created and implemented separately from the manufacturing line. In this system, when a workpiece is fed into the product input section, it is sent out one by one for inspection of both sides. If any defects are found, they are separately ejected for classification. 【Features of this system】 ■ A dedicated inspection device is created and operated separately from the manufacturing line. ■ It determines good and defective products, with defective products being ejected separately. ■ Records are kept of which inspection process detected the defects. ■ The device can be modified according to the inspection content. *First, we will verify whether the workpieces you wish to inspect are feasible for inspection. *Detailed processing information, including the processing flow, is provided in the PDF.
A case study of automating inline visual inspections for food items such as tablets and pills, small parts, etc., that require large-scale inspections aligned on a line!
Would you consider introducing "automated inspection using cameras" for the inspection of food products such as tablets and small items like washers? We would like to introduce examples of systems that operate by installing cameras and lighting on existing conveyor lines. This system allows for inspection without creating a complex conveyor line by simply installing cameras and lighting on the customer's existing conveyor line. If modifications to the existing line are necessary based on the customer's inspection requirements and preferences, we can accommodate that as well. 【Features of this system】 ■ Inspection can be performed on the conveyor line without creating a separate system ■ Suitable for high-speed inspection of large quantities of products ■ Quick response is possible in case of defects since inspection is conducted on the conveyor line ■ Compatible with products other than tablets, such as tablet medications and washers ■ Equipment can be modified based on inspection requirements *First, we will verify whether the work you wish to inspect is feasible. *Detailed processing information and flow are included in the PDF.
A case study of the introduction of automatic inspection on the conveyor line for reading and verifying the printed text on packaging boxes and bags!
Would you like to switch the inspection of lot numbers, dates, barcodes, etc., printed on packaging boxes and bags from "visual inspection" to "automated inspection using cameras"? We would like to introduce examples of systems that have been implemented by installing cameras and lighting on existing conveyor lines for inspection purposes. This system is an example of introducing an inspection system by installing cameras and lighting on your conveyor line. It can address various issues related to printing, such as whether characters and numbers are printed correctly and whether they are legible. 【Features of this system】 ■ Inspections can be conducted on the conveyor line ■ Confirmation of printed content and barcode reading are possible ■ The condition of the packages being inspected can include not only boxes but also paper and plastic bags ■ Inspection locations can be changed based on the inspection content * First, we will verify whether the work you wish to inspect is feasible. * Detailed processing information, including details and processing flow, is provided in the PDF.
An example of the automation of exterior inspection using a 2D operational conveyor system to inspect scratches and dents on the surface of wooden doors!
Regarding the necessary inspections for "scratches and dents" on relatively large product surfaces such as closet doors and doors, would you consider switching from "visual inspection" to "automated inspection using cameras"? We would like to introduce a case study of a system that has been implemented, which installs a camera and lighting on an XY stage movement device to conduct inspections even for products with large surface areas. In this system, products are placed at designated positions on the device, and the camera and lighting move to capture images, allowing for inspections of products that require inspection over large areas. When conducting visual inspections on large products, their size can become a hindrance, requiring significant effort for visual inspection. Additionally, certain areas may become difficult to see depending on the location, leading to potential oversights and other issues. **Features of this system:** - For workpieces that are too large to capture in a single image, the camera can be moved to enable comprehensive imaging. - The camera moves to inspect areas that are difficult to confirm visually. *First, we will verify whether the workpieces you wish to inspect can be inspected with this system. *Detailed processing information, including the processing flow, is provided in the PDF.
An inspection system that can perform tasks similar to those done manually by humans by using a multi-axis robot.
For those manufacturing electronic components and small parts that require inspections at multiple locations, we propose an appearance inspection device that conducts inspections at various points using a multi-axis robot!! This inspection device is designed to simultaneously capture and inspect the surfaces of four parts created at once by a molding machine, both front and back, in a single operation, classifying and discharging each as either OK or NG!! 【Features of this system】 ■ Inspection system utilizing a multi-axis robot ■ Allows inspection of different locations by having the robot hold the workpiece ■ Separates and discharges OK and NG parts through robot handling. *First, we will verify whether the workpiece you wish to inspect can be accommodated. *Detailed information is provided in the PDF.
For those who have existing manufacturing and transport lines and find it difficult to introduce inspection equipment, there is an exterior inspection system that can be installed retroactively.
To those involved in the manufacturing of bottled beverages and similar products, we have a proposal for an inspection device that can be installed later! By attaching a camera to your existing manufacturing and transport line, it is possible to conduct inspections for cap float, liquid filling amounts, label adhesion conditions, and printed inspections on boxes after packaging, all at once. 【Features of this system】 - Cameras can be attached to existing manufacturing and transport lines, enabling inline inspections. - Multiple inspections, such as cap float and label adhesion, can be conducted simultaneously. - If additional inspections are required, those functions can be added. *First, we will verify whether the work you wish to inspect can be accommodated. *Detailed information is provided in the attached PDF.
