Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
226～240 item / All 407 items
For the creation of safer and more secure housing...
This is an integrated multifunction device that supports both surface wave exploration and dynamic seismic performance measurement, ranging from ground bearing capacity surveys and ground natural period surveys for newly built houses to seismic resistance surveys for wooden houses.
Numerical representation of seismic performance and renovation effects in wooden single-family houses.
DYNAS provides answers to customers seeking specific numerical values for seismic renovations by displaying the behavior of buildings during earthquakes and the effects of seismic retrofitting, which are difficult to assess using conventional seismic diagnosis methods.
Non-contact and non-destructive 3D measurement is possible.
The white light interferometry measurement method is a device that enables non-contact (non-destructive) three-dimensional measurement of sample surfaces with "wide field of view, high vertical resolution, and wide dynamic range" using a high-brightness white light source. - Surface shape measurement device using a high-brightness white light source - Capable of three-dimensional measurement in a non-contact and non-destructive manner - Wide field of view (50μm×70μm to 5mm×7mm) - High vertical resolution (0.1nm) - Wide dynamic range (<150μm)
"Modern safety management is smartly done through rentals!" Introducing products useful for various safety measures such as electricity, gas, proximity detection, speed monitoring, and heatstroke prevention.
In the manufacturing industry, labor accidents such as falls, drops, and entanglements occur frequently. According to data from 2017, there were a total of 120,000 injury and fatality incidents resulting in four or more days of work stoppage, with the manufacturing sector accounting for the highest number at over 26,000 cases. This document explains the risk assessment methods for each workplace. Additionally, we introduce several measuring instruments for safety measures that can be "rented only when necessary and for the required duration." [Contents] - Risks lurking in workplaces dealing with electricity and the importance of quantifying electrical hazards - Risks present in environments where gas is generated and methods for early detection of dangers - Accident risks such as contact, entrapment, and collisions, along with safe work practices - The risk of heatstroke that can occur indoors and the heat index that should be known - Introduction of measuring instruments necessary for various safety measures We are currently offering a document introducing rental equipment available from our company that is useful for safety management in the four areas of "electricity," "gas," "proximity detection and speed monitoring," and "heatstroke." You can view it by downloading.
![[COTO] Small-sized, long-life reed relay for ATE and measurement devices.](https://image.mono.ipros.com/public/product/image/ffa/2001072221/IPROS50739026009009185699.jpeg?w=280&h=280)
[9814&9852 Series] Ideal for automatic testing equipment, measuring instruments, and communication devices. A compact surface mount relay with outstanding RF performance.
Introducing COTO TECHNOLOGY's new lead relay products, the 9814 and 9852 series. The 9814 & 9852 series surface mount lead relays are ideal for the needs of automatic testing equipment, measuring instruments, and communication requirements. They are compact surface mount lead relays that combine a small size with excellent RF performance. The 9814 utilizes Coto's unique switch technology to extend the lifespan during ATE load by more than three times. The external magnetic shield reduces interaction between components on high-density boards. The 9852 includes a Form C feature. These relays enable high-density mounting due to their compact size and additional functionality, making them perfect for designs such as high-speed, multi-pin VLSI testers that require speed, compactness, and high performance.
Drone-mounted! PHOENIX aerial mapping system = a system that doesn't fail.
The "PHOENIX AERIAL AL3-16" is a drone (UAV) mounted laser measurement device that can obtain accurate measurement values even in densely wooded areas, making it suitable for various applications. LiDAR generates 3D point cloud data based on the time difference when laser beams reach and reflect off objects. Measurement of terrain is possible in vegetated areas as long as visibility to the ground is ensured. 【Features】 ■ Real-time mapping ■ Surface data can be collected even in densely wooded areas ■ High-efficiency measurement through programmed flights ■ Ultra-wide-angle data collection of over 300 points/m² ■ 3D models can be generated during flight and output to a computer *For more details, please download the PDF or feel free to contact us.
Real-time behavior of moving bodies can be measured at 200Hz! Compact hybrid MEMS gyro with GNSS and INS.
The "iTraceRT-M200A" is a compact INS/GNSS measurement device compatible with both GPS and GLONASS satellite systems. It has an internal dual-frequency GNSS receiver board, enabling real-time motion attitude measurement at 200Hz. For all kinematic observations, it can output acceleration, angular velocity, attitude (pitch/roll/heading), speed, and position at a maximum of 200Hz. 【Features】 ■ Compact and lightweight system ■ Input option for vehicle speed pulse sensor ■ User-friendly operation and display with iTraceRT Command software ■ Data output capability up to 200Hz ■ Support for CAN message output *For more details, please refer to the PDF documentation or feel free to contact us.
![[Development Case] "Shoe Inner Dimension Measurement Device" Specification Development, Prototype Evaluation, Mass Production](https://image.mono.ipros.com/public/product/image/4dc/2000685730/IPROS13613585796458776724.png?w=280&h=280)
Introduction of the system specifications and detailed specifications development for shoe interior measurement devices, actual machine evaluation, and mass production examples.
Unic Corporation is engaged in the development of system specifications and detailed specifications for the "shoe inner dimension measurement device," as well as practical evaluations and mass production. We will introduce our customers' requests, our responses, and the benefits of utilizing our services during development, evaluation, and mass production. 【Customer Requests】 ■ We want to measure the inner dimensions of shoes accurately and in a short time. 【Our Response】 (1) Creation of development proposal (2) System specifications, selection of robots and sensors, mechanical design, development of control programs (3) Device creation (4) Practical evaluation *Please feel free to contact us for more details.
Ideal for engine test cells.
There are storage cases for up to 6 channels and up to 14 channels, equipped with a tracking filter (programmable). It can also be used manually.
Developed a lightweight spectrometer that can be held with one hand, consisting of an aluminum chamber with an ICF70 vacuum flange.
We have developed a lightweight spectrometer that can be held in one hand, consisting of an aluminum chamber using the ICF70 vacuum flange, suitable for detecting vacuum ultraviolet light at around 100 nanometers. If you wish to proceed with mass production, we will optimize the price and performance in collaboration with many companies that have formed alliances with us.
Adoption of panel mount type structure!
The YPMS-48 is a fully waterproof measuring instrument that allows for one-touch replacement. It is possible to set the transmission output range arbitrarily within the measurement range, and it uses a strong membrane that is resistant to cracking. Additionally, calibration can be performed easily by immersing the electrode in a standard solution, and it features a ring exchange system for easy corneal replacement. 【Features】 ■ CE certified products in the lineup ■ Panel mount type structure ■ Sub-display for parameter display ■ Compatible with a wide power supply voltage of AC100V to 230V ■ Low power consumption of approximately 5VA *For more details, please refer to the catalog or feel free to contact us.
From manual measurement to automatic measurement! Automatically count cultured bacterial colonies.
"ColoScan" is a microbiological test that automatically counts bacterial colonies. ~Do you have these concerns with manual counting?~ 〇 It takes time... 〇 Labor costs are high... 〇 Handwritten records have inconsistencies... 〇 Inputting test results doesn't allow for image retention... With our product, when you take a picture of the target bacterial colonies with a camera, counting starts instantly, and the count data is automatically managed along with photos of the samples. Anyone can easily operate it, and since there is no hassle with data entry, the labor hours previously required will drastically change, reducing work time to less than half. 【Features】 ■ Compact and space-saving ■ Images can be retained for safe and secure management ■ Easy operation for anyone ■ No hassle with data entry ■ Work time reduced to less than half *For more details, please refer to the PDF document or feel free to contact us.
