Measuring Instruments Product List and Ranking from 250 Manufacturers, Suppliers and Companies

[Latest Version] UN REGULATION NO.10

Detailed information on new definitions, main amendments, and transitional provisions (transition measures) is published!

This document provides an overview of the changes from the 6th edition to the 7th edition of UN Regulation No. 10, issued on June 17, 2025, focusing on information related to ESA testing. Key changes include detailed explanations of "expansion of the upper limit of RF immunity test frequencies," "permission for the use of FFT-based measuring instruments," and "changes to current requirements during charging." Please feel free to download and read it. [Contents] ■ Introduction ■ New definitions, etc. ■ Main amendments ■ Overview of key changes ■ Transitional provisions ■ Conclusion ■ Supplement *For more details, please download the PDF or feel free to contact us.

Company：一般財団法人日本品質保証機構計量計測部門、総合製品安全部門
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Laser measurement device for AM: "Scan Field Monitor (SFM)"

All laser measurements with one device! All-in-one measurement system dedicated to additive manufacturing.

The "Scan Field Monitor (SFM)" is a groundbreaking measurement system ideal for 3D printing systems (additive manufacturing). It acquires various data by scanning a laser on a special glass (patented). It can measure all parameters essential for operation verification before 3D printing in just about 3 seconds. All measurements, including scan speed, scan position accuracy, beam diameter, and focus shift, are achieved with a single device. 【Features】 ■ Beam diagnostics that were previously impossible, such as scan speed and beam diagnostics at various positions, are now possible. ■ By integrating applications for multiple calibration tasks into one device, cost reduction, efficiency improvement, and reduction of work time are achieved. ■ Measurements can be taken under actual operating conditions for laser sintering (laser power and inert gas atmosphere). ■ Comprehensive scanner analysis is possible with a single device. ■ A compact measurement tool with excellent practicality. 【Specifications】 ■ Wavelength: 1,000 to 1,100 nm ■ Input Power: 10 to 1,500 W ■ Beam Diameter: 50 to 500 μm ■ Maximum Power Density: 100 MW/cm² *For more details, please download the PDF or contact us.

Company：PRIMES Japan
Price：Other

Other measurement, recording and measuring instruments
Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic measurement device for system embedding

We will calculate the correction amount from the state of the work and conduct a pass/fail assessment after the correction.

Our company handles a "system-integrated automatic measurement device" that moves a strip-shaped laser sensor parallel to the measurement object, reading values at 50mm intervals and determining the displacement amount as a strain value. It targets rail materials up to 4600mm in length, connecting various correction machines and automatic measurement devices through a workpiece transport system as a correction system. This specification allows for the calculation of correction amounts based on the state of the workpiece and the determination of pass/fail after correction. Additionally, it is equipped with a 90-degree inversion function and a centering function that also facilitates the transfer of workpieces. Based on the values, it determines bending tendencies and instructs the insertion direction and inversion direction for the roll machine (for measurement), while setting pass/fail standards for overall bending and local bending at both ends, allowing for the identification of NG (non-conforming) areas (for pass/fail determination). *For more details, please download the PDF or feel free to contact us.

Company：ナショナルテック大門工場
Price：Other

Other conveying machines
Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3D scanner - type three-dimensional measuring instrument

Keyence VL500 3D scanner type three-dimensional measuring instrument. It is used for measurement analysis, modeling, and other applications in a short time.

Overview ■ Introduced in November 2021 ■ Modeling through quick scanning ■ Comparison with standard models conducted in a short time ■ Analysis through accurate 3D shape measurement ■ Pre-processing case studies and functionality checks are also possible.

Company：大和精工
Price：Other

3D measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Explanation of the costs required for ISO certification! 【Audit fees and consulting fees】

A clear explanation of the costs associated with obtaining ISO in a column format!

There are two main types of costs associated with obtaining ISO certification. The first is the examination fee charged by the certification body necessary for obtaining ISO certification. The second is the consultant fee for assisting with preparations leading up to the examination. Regarding the consultant fee, it is not necessarily an expense that must be incurred, but based on my experience, about 90% of companies seeking new ISO certification typically contract with a consultant to help prepare for the examination. First, let me discuss the examination fees. In conclusion, examination fees vary depending on the certification body, just like with consulting firms. Additionally, examination fees may differ based on the customer's industry and size. In our case, examination fees vary based on the following five conditions: ■ Number of applicable personnel ■ Number of applicable locations ■ Applicable standards ■ Applicable business activities ■ Presence of design and development activities *For detailed information in the column, please refer to the related links. For more details, feel free to contact us.*

Company：GCERTI-JAPAN
Price：Other

ISO-related consultant

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Industrial machinery, measuring instruments, and testing evaluation equipment.

Leave all your industrial machinery, measuring instruments, and testing evaluation equipment needs to us!

Our company sells, modifies, maintains, inspects, and services industrial equipment, measuring instruments, and testing evaluation equipment. We search for special sensors from around the world and can accommodate both general jigs and high-precision jigs. Please feel free to contact us if you have any requests. 【Process】 1. Material input 2. Manufacturing 3. Testing 4. Shipping *For more details, please download the PDF or contact us.

Company：アイケイアイ
Price：Other

Other measurement, recording and measuring instruments
Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evaluation, certification, and support service "ISO 26262 (Functional Safety)"

"Live management" can be implemented! We can conduct functional safety management certification for organizations!

"ISO 26262" is a functional safety assessment and certification service for automobiles. The quality management required by "ISO 26262" shares common elements with ISO 9001 and IATF 16949, allowing for the implementation of a "living management" system that leverages the existing framework established under ISO 9001 and IATF 16949 to comply with ISO 26262. Upon request, we can also provide functional safety management certification for organizations, which means that within the same organization, there is no need to obtain functional safety management certification for each product designed and developed, leading to greater efficiency. 【ISO 26262 Compliance Support】 ■ Personnel Training (in collaboration with TUV-NORD) ■ Functional Safety Management Certification ■ Software Tool Certification ■ Functional Safety Development Support Services (in partnership) *For more details, please refer to the PDF document or feel free to contact us.

Company：一般財団法人日本品質保証機構 ISO中部支部
Price：Other

ISO certification body
ISO-related consultant

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Load Control Measurement Device "MS-8000"

A system suitable for high-load testing at low rotation speeds! Real machine simulation testing is possible.

The "MS-8000" is a load control measurement device used for the development and evaluation testing of agricultural and construction machinery, combined with a disc brake dynamometer. It features a Windows interface and a simple operation panel, providing a good operating environment. It supports various tests, from performance and load durability tests to simulations. Additionally, we offer the "PD-1100" for single-axis load control, the "PD-2100" for dual-axis load control, and the disc brake dynamometer "CD series/KD series." 【Features of MS-8000】 ■ Stable dual-axis load control enabled by high-speed pneumatic control ■ Capable of real machine simulation testing ■ Easy creation of operating programs ■ Flexible drawing and charting capabilities ■ Excellent operability and easy maintenance *For more details, please refer to the PDF materials or feel free to contact us.

Company：ピーマックス
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

METRIX Vibration Sensor 'SW5484E'

This is a seismic vibration measuring instrument made of stainless steel with improved corrosion resistance.

The SW5484E is a seismic vibration measurement device used to measure structural vibrations in bearing housings, piping, machinery housings, and mechanical support structures. It is particularly suitable for machines equipped with rolling-element bearings. Please feel free to contact us if you have any inquiries. 【Configuration & Settings】 ■ Safety Integrity Level (SIL) rating ■ 4-20 mA signal ■ Raw signal option available ■ Waterproof (IP68) ■ Approval for use in hazardous areas, etc. *For more details, please download the PDF or feel free to contact us.

Company：BATROSS 東京本店
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Confront the vibrations and sounds around you! - Discern the good from the bad -

Keywords: seismic resistance, seismic isolation, vibration isolation, sound, brain waves, electromyography, sports

The research fields are broad, including quiet engineering, seismic and vibration engineering, acoustics, sports engineering, and bioinformatics. In general, the research focuses on vibrations, sounds, and movements. Vibrations and sounds exist in our daily lives. Some of them can be harmful to us, while others enrich our lives. For example, the earthquakes that have been frequent in recent years have caused damage to people and structures. Additionally, harmful vibrations and noise are generated in factories, automobiles, railways, aircraft, and countless other sources. On the other hand, there are also many applications that utilize vibrations. Various uses of vibrations include transportation, rock drilling machines, and in the realm of sound, music and alarm sounds, among others. Harmful vibrations and sounds should be reduced, while usable vibrations and sounds should be effectively utilized. This requires understanding their characteristics through observation and measurement, modeling and simulation, as well as establishing design guidelines and evaluating human perception and sensitivity. Currently, research is being conducted on increasing rigidity by twisting thin plates and evaluating human comfort using brain waves.

Company：埼玉大学オープンイノベーションセンター
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exploring the function of cell membranes through the movement of lipids!

Keywords: Cell membrane, biophysical chemistry, fluorescence spectroscopy measurement, fluorescence correlation spectroscopy, lipid bilayer.

The smallest structural unit of living organisms is the cell, which is covered by a cell membrane primarily composed of a lipid bilayer. This cell membrane functions as a barrier that separates the internal environment of the cell from the outside, while also contributing to the maintenance of life by allowing the uptake of molecules from the external environment as needed. In the special physiological functions of this cell membrane, the physical properties of the lipid bilayer, particularly its dynamics, are very important, and we believe that understanding the movement of lipids within the lipid bilayer will deepen our understanding of the cell membrane. In our laboratory, we are developing and applying new fluorescence spectroscopy methods to precisely analyze the movement of lipids within the lipid bilayer. We are conducting research daily with the aim of understanding the extraordinary functions of living organisms from the movements of small molecules that are invisible to the naked eye.

Company：埼玉大学オープンイノベーションセンター
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Freely portable custom-ordered existing measuring instruments.

Introducing the benefits of taking existing measuring instruments outside for measurements!

Measuring instruments, which play an important role in various fields, are used in manufacturing and industrial production to ensure product quality through accurate data collection of chemical components and environmental conditions, as well as analysis and judgment based on that data. While measuring instruments are often installed in the same environment or location to detect data trends and slight changes, there are also benefits to taking them outside for operation. For example, by bringing measuring instruments to the field, it is possible to collect real-time data based on the environment and conditions, leading to the acquisition of realistic data that cannot be obtained in laboratories or research facilities. Furthermore, the ability to measure in different locations and conditions increases the number of cases that can be addressed, thereby expanding the application range of measuring instruments. Additionally, bringing measuring instruments to the field allows for rapid response when issues such as abnormalities are detected, enabling the identification of causes on-site and immediate implementation of countermeasures. *For detailed content of the article, please refer to the related links. For more information, please download the PDF or feel free to contact us.*

Company：コンテック
Price：Other

Other measurement, recording and measuring instruments
Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Column] What is the 4-20mA output of measuring instruments? Is calibration necessary?

Even when the measurement value is 0, it outputs 4mA, and in the case of a disconnection, it becomes 0mA, making it easy to identify abnormalities!

The 4-20mA output is a type of analog output that outputs a current range from 4mA to 20mA, representing 0 to 100%. It is widely used as a standard analog output in measurement instruments due to the numerous advantages listed below: - It outputs 4mA even when the measurement value is 0, and it becomes 0mA in case of a disconnection, making abnormalities easy to identify. - There is no attenuation over long distances of several hundred meters (in the case of voltage output, the longer the distance, the more it attenuates due to resistance). - It is more resistant to noise compared to voltage signals. - Conversion to 1-5V is easy. For these reasons, it is adopted in many devices. *For detailed content of the column, you can view it through the related links. For more information, please download the PDF or feel free to contact us.

Company：コンテック
Price：Other

Calibration and repair

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inertial Measurement Device "HSI Series"

Two types are available: "HSI" with a charging circuit and the compact version "HSI-mini"!

The "HSI Series" is a compact high-speed inertial measurement device. The "HSI" with a charging circuit can save acceleration and gyro values to flash memory at a high frequency of 1kHz. The battery is compatible with a single-cell LiPo battery and can be charged. The compact version "HSI-mini" removes the battery charging function from the HSI, adds a wider range pressure sensor, and further reduces the size. 【Product Lineup】 ■HSI ■HSI-mini *For more details, please download the PDF or feel free to contact us.

Company：ワークロボティクス
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Warm Gear Automatic Measurement Device "SA-162 Type"

We adopted a detector with a resolution of 0.5μm, achieving high-precision measurements!

The "SA-162 type" is an automatic worm gear measurement device that allows for the rotation of a worm gear in a combined state, enabling the measurement of gear precision in a dynamic state. It can determine variations in center distance, runout components, and surface abnormalities. It employs a detector with a resolution of 0.5μm, achieving high-precision measurements. Additionally, data processing is done on a computer, allowing for the visualization of data graphs on the screen. As an option, marking to the maximum point and ranking classification functions can be added. 【Features】 ■ Capable of determining variations in center distance, runout components, and surface abnormalities ■ Utilizes a detector with a resolution of 0.5μm, achieving high-precision measurements ■ Visualizes data graphs on the screen ■ Optionally adds marking to the maximum point and ranking classification functions *For more details, please download the PDF or feel free to contact us.

Company：大菱計器製作所
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring Instruments Product List and Ranking from 250 Manufacturers, Suppliers and Companies

Measuring Instruments Manufacturer, Suppliers and Company Rankings

Measuring Instruments Product ranking