Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 641 items
Powerful Slim Spot Cooler Air Fan (No Heat Emission, No Drain) Single Phase 100V Specification Model Number M3469PSF-611N
Reduce electricity costs and improve the on-site environment. Eco (low power consumption) × Comfort (spacious, cool, and convenient).
Energy-saving × high airflow, the super large cooling fan delivers cool air up to about 30 meters away!
● Delivers cool air up to about 30 meters away ● Easy to transport with caster and hanging hardware
One-time removal of hydrogen sulfide gas generated from the sulfuric acid treatment and wastewater treatment facilities of recycled paper, board, and cardboard manufacturing plants. Protects control equipment from hydrogen sulfide gas.
Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. Hydrogen sulfide gas is generated in sulfuric acid treatment and wastewater treatment facilities at recycling, paperboard, and cardboard manufacturing plants. Even trace amounts of hydrogen sulfide gas that do not affect human health can have a significant impact on equipment. Hydrogen sulfide gas at levels of just a few tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is a simple and low-cost solution for addressing hydrogen sulfide gas. ＊＊＊＊Exhibition Information＊＊＊＊ We will be exhibiting at the Sewerage Exhibition 25 in Osaka. Event Period: 2025/7/29-8/1 Booth Number: 2-317
![[Case Study] Instant Removal of Sulfur-Based Gas in a Tire Factory](https://image.mono.ipros.com/public/product/image/98e/2000823508/IPROS11420419859709276844.jpg?w=280&h=280)
Conduct an investigation into sulfur-based gases generated in the sulfurization process and diagnose the risks. Prevent equipment failures with gas removal devices and improve factory operating rates.
In the tire factory's vulcanization process, sulfur-based gases are generated. The emitted sulfur-based gases are at a low concentration of several tens of ppb, which do not affect the human body, but they are highly corrosive and can cause failures in the contact parts of machinery. Additionally, corrosion of chip resistors can change their resistance values, leading to reported cases of affecting the operation of control devices. JMS Corporation provides comprehensive support from the investigation of sulfur gases to countermeasures. First, we conduct an investigation into the entry routes and causes of sulfur-based gas, as well as an environmental risk analysis. After the investigation, we will propose the most suitable environmental improvements tailored to the customer's site.
Protects equipment from corrosive gases caused by air pollution.
The Coro Shooter protects equipment from corrosive gases caused by air pollution. India is experiencing significant economic development. On the other hand, air pollution has become a major social issue. The SOx and NOx contained in air pollution have high corrosive components, which can lead to equipment failure. The Coro Shooter removes SOx and NOx to purify the air and prevent equipment failure caused by corrosive gases.
Fuel Bubble Eliminator Return Fuel Processing Unit Model 370-170/175 (for Medium Gasoline and Diesel Engines)
When accurately measuring fuel flow, it is important to remove any air bubbles entering the fuel flow meter. This is especially crucial when measuring the very small fuel consumption from idle to full throttle in applications such as two-wheelers and small general-purpose engines, where air bubbles in the fuel must be almost completely eliminated. Additionally, gasoline contains low-boiling components like propane and butane, which can lead to the natural formation of air bubbles in the fuel line, particularly on hot days. By using a single fuel flow meter to return the amount from the engine to the level controller, the return amount is recirculated, allowing for high-precision measurement of fuel consumption up to full throttle without potential errors during idle and low-speed operation. Features: 1. Very low hysteresis. 2. Efficient removal of air bubbles from the engine's return fuel. 3. No back pressure in the engine's return line due to atmospheric venting. 4. Smooth float operation allows for precise control of return fuel from the engine and supply fuel, enabling high-accuracy measurement of instantaneous fuel flow and cumulative consumption.
No hassle in management, just switch it on and it works! It also removes settled varnish.
The "SVR" is a soluble varnish removal device used worldwide to prevent varnish formation in lubricants. Using ICB purification technology, it removes varnish contaminants dissolved in oil without affecting the additives in turbine oil. It can be installed at any time on the bypass line of the oil tank, and during turbine operation, it reduces the varnish that precipitates and deposits when the oil temperature decreases by removing the varnish dissolved in the oil. 【Features】 ■ Removes deposited varnish ■ Prevents stickiness of servo valves ■ Reduces ISO code (particle count grade) ■ Restores oil color and clarity ■ Compact installation area with simple piping *For more details, please refer to the PDF document or feel free to contact us.
The hopper, trommel, and feeder are integrated, allowing for direct bulk input of mixed waste, making it easy to sort and quantitatively discharge materials like sand.
By removing attachments and residues such as sand and moisture in advance, efficient manual sorting can be performed through simultaneous control of the trommel and conveyor.
It is a low-cost empty can sorting conveyor with a simple structure.
By installing the sorting table (optional), the sorting rate will improve.
High-speed sorting of steel cans using a powerful magnet.
It is a high-speed processing type with a capacity of 500 kg per hour.
Non-ferrous materials as small as 5mm can be sorted.
The Mix metal sorting device 'NES' Linear can sort non-ferrous materials of extremely small sizes (minimum 5mm). Since iron does not adhere to the drum, wear on the drum and belt can be minimized compared to conventional linear sorting machines.
It sorts mixtures that cannot be separated by magnets or non-ferrous sorting devices.
The work that was done through manual sorting can be eliminated, resulting in a reduction in labor costs.
No negative impact on plating! A device that can remove 99% of nickel from acidic plating solution.
"NANAO IP-ZERO" is a device developed for the purpose of removing nickel ions, which are impurities in acidic gold plating solutions. When applying partial gold plating to nickel-plated materials, nickel dissolves in the gold plating solution, adversely affecting the properties of the gold plating layer. Researchers at Nanao Industry have established a technology that separates and removes not only nickel ions but also iron ions by combining multiple separation techniques. 【Features】 ○ Can remove 99% of nickel, which is mixed in as an impurity in acidic gold plating. ○ Gold compounds remaining in the device are cleaned and recovered to be returned to the gold plating tank. ○ The plating solution after removal has no impact on the plating process. → Tested in plating factories. ○ Significantly reduces the time required for plating solution regeneration. → Prevents funds from being frozen for a certain period, improving capital turnover efficiency. For more details, please contact us or download the catalog.
Significantly reduce the time and cost until the need for plating solution replacement! Compact design that can be used anywhere.
The "NANAO IP-ZERO Fe" is a cartridge exchange and regeneration type iron ion removal device for acidic plating solutions. It significantly improves the time until the plating solution needs to be replaced. After using the plating solution to a specified Fe concentration, you can choose to remove Fe ions in a separate process using this product. 【Features】 ■ Compact device that does not require much installation space ■ Continuous removal of Fe ions ■ Maintains low Fe concentration over a long period ■ Allows selection of the specified removal operation time to reduce Fe concentration below the reference value *For more details, please refer to the PDF document or feel free to contact us.
Compact wire drawing lubricant removal device with easy brush replacement.
By connecting a dust collection duct (required separately) to the uniquely designed hood, the brushed dust is expelled. The mechanical parts are equipped with an air shield, achieving maintenance-free operation (purge air required). Demo units are available for loan.
For the removal of HCL and dioxins from waste incineration facilities! There are numerous achievements in exhaust gas treatment.
This product can stably store and blow various chemicals (quicklime, baking soda, activated carbon) for the removal of harmful gases generated during waste incineration. By combining a uniquely designed silo with a highly reliable pneumatic auto feeder, long-term stable operation is achieved. Additionally, we offer a compact system that integrates everything from reception to transportation. Please contact us for more details. 【Features】 ■ Suitable for the removal of HCL and dioxins in waste incineration facilities, etc. ■ Enables stable chemical blowing ■ Numerous achievements in exhaust gas treatment ■ Achieves long-term stable operation *For more details, please refer to the PDF materials or feel free to contact us.
The definitive solution for scale removal in circulating cooling water systems! No chemical agents used! Evaluation requests are welcome.
This is our original product that powerfully removes scale adhering to circulation cooling water systems, such as cooling towers, using electrolytic technology. It demonstrates a stronger removal effect compared to conventional methods such as chemical injection, magnets, and weak electrolysis. This enables significant energy savings and CO2 reduction by reducing environmental impact and preventing efficiency decline in heat exchangers. Additionally, it does not cause corrosion in piping, allowing for safe use. 【Features】 - By flowing a strong current, it increases the solubility of circulating water. - It attaches scale-causing substances to the electrodes and discharges them outside the water system. - It is an environmentally friendly device as it does not use chemical agents. - It also removes scale inside the piping through electrolyzed water. - It can be installed independently from the cooling tower piping. - Conductivity, electrolytic current, electrolytic voltage, and operating time are displayed on an LCD. For more details, please contact us or download the catalog.
A device that changes the "quality" of circulating water and removes scale by performing special electrolysis on the circulating water without using chemical agents.
"ElectroLife" is a device that changes the "quality" of circulating water and removes scale by performing special electrolysis on circulating water without the use of chemical agents. Since it does not use chemicals, it is an environmentally friendly, 21st-century type of new device. 【Features】 ○ It flows a stronger current than other devices, increasing the solubility of circulating water. ○ By flowing a strong current, it creates water quality that is less prone to scale adhesion. ○ It manages the conductivity of circulating water by controlling the drainage time. ○ Electrode switching time, drainage time, and the strength of the electrolysis current can be easily set from a touch panel. ○ Conductivity, electrolysis current, electrolysis voltage, and operating time are displayed on an LCD for reliable maintenance. ○ The device can be installed while the production is in operation. ○ Even if the device temporarily stops, there is no impact on the production equipment. ● For other functions and details, please contact us.
Micro-ATX carrier board for COM Express Type 6 module
Features ■ Carrier board for COM Express Type 6 modules ■ Convenient onboard power/reset switch for evaluation/verification ■ Supports 10GbE LAN x2 for PCOM-B634VG ■ Expandable with PCI Express x16, x4
Prevent measurement errors in electronic scales!
The U-shaped electrode DC Compact is an electrostatic removal device designed for use in laboratories. Its main purpose is to prevent measurement errors caused by static electricity when weighing on an electronic balance. By passing beakers or flasks through the U-shaped electrode DC Compact just once, it can neutralize static electricity on three sides. This minimizes the risk of measurement errors due to static electricity, allowing for accurate measurement of minimal quantities. The U-shaped electrode DC Compact features an optimized design that radiates ions to discharge static electricity from all corners of the sides and bottom of the test samples and containers.
For removing dust, hair, and other debris from work clothes!
Powerful suction to remove foreign substances such as hair and dust from work clothes, replacing sticky rollers. ■□■Features■□■ ■Uses a rotating brush to dislodge and suction up foreign substances that have settled into wrinkles and fabric weaves. ■Allows for one-touch adjustment of suction "strength" and "time." ■Notifies you with a lamp when it's time to replace the dust collection bag. ■Hygienic and mess-free bag replacement. ■Available in two-person and one-person models. ■Offers types for 100V and 200V single-phase. ■For more details, please contact us.
Activate water by coming into contact with a special ceramic! Improved drying speed and cleaning power!
The "Active Reactor" is a device that uses a physical approach with "water" utilizing special ceramics. By bringing the ceramics into contact with water, it measures the activation of "water" and creates purpose-driven water. It has the effect of aligning water molecule orientation and reducing water clusters, which lowers surface tension, contributes to improved cleaning power, and also aids in increasing drying speed. Furthermore, it promotes the decomposition of rust. In the manufacturing process of electronic circuit components, the use of activated water prevents the proliferation of bacteria in the manufacturing tank and helps prevent contamination of the base material. 【Features】 ■ Activates "water" using special ceramics ■ Reduces surface tension and contributes to improved cleaning power ■ Increases drying speed ■ Promotes the decomposition of rust *For more details, please refer to the PDF document or feel free to contact us.
![Technical Document "Physical Processing [Removal of Silica]"](https://image.mono.ipros.com/public/product/image/3cc/2000259003/IPROS7256770943194487076.png?w=280&h=280)
A guide to water treatment technology! Featuring "Physical treatment for the removal of silica."
The technical document "Physical Treatment of Silica Removal" is an explanatory text on water treatment technology by Japan Wacon Co., Ltd., which has been comprehensively engaged in engineering, equipment design and manufacturing, and maintenance management related to water treatment since its establishment. This document explains the physical treatment methods for silica removal. [Contents] ■ Solubility of silica ■ Silica removal through coagulation treatment ■ Silica removal using ion exchange resin ■ Treatment of water containing both calcium and silica For more details, please refer to the catalog or feel free to contact us.
Forcefully remove components in water and reduce scale problems!
It is a device that lowers the concentration of scale components in cooling water by separating and extracting the physical components. This allows for the removal of scale components contained in cooling and makeup water, enabling a reduction in the amount of water treatment chemicals and makeup water. Being non-chemical, it can maintain clean water quality without putting a burden on the environment.
【Mita Repo】Can the powder removal of SLS printers be done automatically!? I tried using "Fuse Blast"! System Create
"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product categories handled by System Create, we deliver useful information each time. In Vol. 95, we used "Fuse Blast" to automatically perform post-processing on two types of hollow-shaped models created through powder molding, investigating how much material could be removed. The "Fuse Blast," which automatically performs post-processing for the powder molding 3D printer "Fuse 1+ 30W," has made its debut! By rotating the basket during the blasting process, it can automatically remove the powder attached to the model! So, aren't you curious about how much can be removed? This time, we created two types of hollow-shaped models and investigated how much could be automatically removed. While confirming the performance of Fuse Blast, we will conduct automatic processing and use CT to verify its capabilities. The materials include images of the work process and CT scans. *You can download the materials from the button below.
Finally developed! A new type of static electricity removal device. No air required and ozone-free.
This method removes static electricity through electric field radiation, and a major feature is that it does not use air. Additionally, it does not generate ozone and can keep power consumption low. The electricity cost is about 1,000 yen per year, and it is also highly effective for CO2 reduction. Installation is easy, requiring only two small and lightweight electrodes weighing 20 grams each. The ozone smell that was a concern with previous static electricity removal devices is gone! It is also ideal for removing static electricity during the packaging of food and pharmaceuticals! *The image shows the device in use with a parts feeder. The applications are flexible, so please contact us for more information. ≪Features≫ ◆ No ion blowing (no air required) ◆ No ozone generation ◆ Energy-efficient (power consumption below 1W) ◆ Easy installation and maintenance-free ◆ Usable in a vacuum ◆ Compatible with high-speed transport ≪Testing with sample units is currently available!!≫ We will provide samples for free. Please give it a try! ◇ For more details, please check 'Request for Information' or 'Download'.
With XRT technology and XRF technology, sorting that is not affected by the surface condition of the raw materials is possible!
"Extract" has become capable of handling even more special applications than conventional machines due to advancements in X-ray sensor technology. Equipped with "XRT technology," which sorts regardless of the surface condition of the raw materials, and "XRF technology," which analyzes the elemental composition of metals, it achieves high-sensitivity sorting. In the sorting of motor cores from ferrous metal lines, impurities can be detected and removed based on their atomic characteristics, minimizing yield loss while keeping expensive and hazardous manual sorting to a minimum. 【Features】 ■ Quick return on initial investment ■ High sensitivity ■ Sorting unaffected by the surface condition of raw materials ■ Proven durable design ■ High safety standards *For more details, please refer to the PDF document or feel free to contact us.
Remove and decompose ethylene gas to prevent early ripening and decay of vegetables and fruits. Protect freshness and quality in the distribution and storage of produce, achieving a reduction in waste!
"Bio Turbo" utilizes high-concentration ozone to decompose and remove ethylene gas, one of the plant hormones that promote decay, thereby preventing the early ripening and spoilage of vegetables, fruits, and fresh flowers. While removing ethylene, it also neutralizes over 99.5% of suspended bacteria, mold spores, and viruses, maintaining a clean environment. By preserving freshness, it enhances the value of the agricultural products supplied. In addressing the challenges of "freshness and quality preservation" in the distribution area of post-harvest agricultural products, Bio Turbo demonstrates its true value from short-term storage in facilities such as storage facilities, cold rooms, packaging rooms, and processing facilities to long-term storage. - Extension of shelf life - Removal of ethylene (prevention of early ripening and decline in product value) - Neutralization of bacteria and viruses (maintenance of a clean environment) - Prevention of mold and fungal growth (reduction of waste) - Reduction of odors and secondary contamination *For more details, please refer to the materials available for download in the catalog.
It is possible to collect acidic fumes (white smoke).
Type: RHD A removal device that enables the collection of acidic fumes (white smoke) by combining with a wet exhaust gas treatment system.
