Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 34 items
DVI-D signal can be extended up to 50m with a DVI cable using the repeater DR01!
DR01 is a repeater that can extend DVI-D signals (single link) up to 50 meters using a DVI cable. The input signal supports DVI-D signals up to 1080p or 1920✕1200.
Ethernet signal transmission can be extended up to 500 meters. Low power consumption of only about 1.2W suppresses attenuation.
The "PoE/PoE Plus Power Receiving Ethernet Repeater" is a product that extends the transmission distance of Ethernet by up to 200m with a single unit. It can connect up to four units between hosts, allowing for a maximum extension of 500m. With a low power consumption of approximately 1.2W, it supplies power to PoE devices while minimizing attenuation. We offer two products in our lineup: "Standard Type" and "IP65 Waterproof and Dustproof Type." It also supports 1000BASE-T, making it suitable for high-capacity data communication. 【Features】 ■ Supports STP cables/connectors for noise-resistant transmission ■ Extends Ethernet at 10/100/1000M speeds ■ Operates on PoE power, eliminating the need for an additional power supply ■ Wide operating temperature range of -40 to 75°C (for waterproof and dustproof type) *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Repeater IP09 for extending 100M Ethernet up to 260m (130m on each input/output side)!
The IP09 is a repeater that extends 100M Ethernet up to 260m (130m on both input and output sides) and 10M Ethernet up to 500m (250m on both input and output sides). It can also be used as a transmitter by connecting one IP09 to another, with a transmission distance of up to 500m for 100M Ethernet and up to 800m for 10M Ethernet between two IP09 units. The distance can be extended with each additional unit. *The set of two IP09 units (with power adapter included) is model number: IP09K. - Supports 10BASE-T/100BASE-TX/100BASE-T1 - Auto MDI/MDI-X compatible - Supports full duplex and half duplex communication - Supports EEE (Energy-Efficient Ethernet) - Built-in surge protector (with withstand voltage: 1.5kV)
PHLY Mini Camera Link Repeater
PHLY is the ultimate solution for extending all Camera Link configurations (Base, Medium, Full) with Camera Link cameras up to 85MHz. It features a mini Camera Link connector and a slim yet robust metal case. PHLY supports high-speed data transmission and PoCL. With its state-of-the-art design, it facilitates easy and straightforward future system requirement expansions. PHLY is optimized for space-saving and cost performance, making it a recommended Camera Link repeater.
PHORTE CoaXPress Repeater 4ch (Quad)
The PHT4-RP-T is a 4-channel CoaXPress repeater. It easily extends the transmission distance of CoaXPress interface cameras. It also supports PoCXP, allowing power supply from the frame grabber and to the camera.
Supports all CoaXPress standards and speeds! CoaXPress 2.0 transmitter/receiver/repeater.
The "EQCO125X40" is a CoaXPress 2.0 transmitter/receiver/repeater chip designed to transmit signals simultaneously over a single cable or PCB trace pair. In one direction, a downlink signal encoded with 8b/10b is transmitted at 1.25Gbps to 12.5Gbps. In the opposite direction, a low-speed uplink signal encoded with 8b/10b is transmitted at 20.833Mbps or 41.666Mbps. 【Features】 ■ Equalizer for 1.25Gbps over 130m Belden 1694A coaxial cable or 12.5Gbps over 40m coaxial cable ■ Simultaneous signals over a single cable ・ Downlink up to 12.5Gbps ・ Uplink at 21 or 42Mbps * You can download the English version of the catalog. * For more details, please refer to the related links or feel free to contact us.
【Regular price @98,000~】Ultra-compact 10Gbps repeater with excellent cost performance at a low price.
The MMC-10G2F series is a compact, multi-rate compatible SFP+ optical repeater (media converter). This media converter is designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports "LFP (Link Fault Pass Through) functionality." The MMC series is compatible with broadband applications, making it easy to achieve a more comfortable network.
RS-422/RS-485 Repeater
ADLINK's NuDAM data acquisition module constitutes a comprehensive acquisition network and control system. Up to 256 NuDAM modules can communicate over a single serial RS-232 connection to an RS-485 network from a host computer, enabling communication over distances of up to 4000 feet. Based on an RS-485 multi-drop network system, each module has a unique address ID that allows it to be controlled via a simple ASCII command & response protocol through a standard RS-485 interface, enabling control of all NuDAM modules within the RS-485 network. The NuDAM modules provide direct communication with various sensors that perform all signal conditioning, scaling, linearization, and conversion, allowing for the acquisition of measurements for temperature, pressure, flow, voltage, current, and multiple types of digital signals.
Supports all speeds and interfaces such as Ethernet, 10G, SONET, SDH, and DS-3!
The Fiber series converters/repeaters support multi-rate capabilities, accommodating SONET/SDH, Fiber Channel, and video interfaces (SDI/HD-SDI, DVB-ASI), making them applicable to various needs. The CDR (Clock Data Recovery/only for dual modules) function enables relay with a single module, which was impossible with conventional converters, allowing for cost-effective and reliable long-distance transmission of various lines.
Lineup of 1ch, 2ch, and 4ch! Repeater for cable extension to connect to frame grabbers and more.
We would like to introduce the 'CoaXPress Repeater' for extending cables that connect to CoaXPress-compatible cameras and frame grabbers that we handle. It supports CXP-1 to CXP-12 and is available in 1ch, 2ch, and 4ch configurations. It complies with RoHS2 (10 substances), is compact and lightweight, and can extend the cable length by 2 times. 【Features】 ■ Supports CXP-1 to CXP-12 ■ Available in 1ch, 2ch, and 4ch configurations ■ PoCXP compatible ■ Can extend cable length by 2 times ■ Compact and lightweight ■ Complies with RoHS2 (10 substances) *For more details, please refer to the PDF document or feel free to contact us.
Wiring is easy with Moxa terminal blocks! An ideal RS-422/485 converter/repeater for critical industrial environments.
Moxa's "TCC-120/120I series" is a converter/repeater designed to extend the transmission distance of RS-422/485. Both products feature excellent industrial design, including DIN rail mounting, terminal block wiring, and external terminal blocks for power supply. Additionally, the "TCC-120I" supports optical isolation for system protection. 【Features】 ■ Boosts serial signals to enable extended transmission distances ■ Supports wall mounting and DIN rail mounting ■ Easy wiring with terminal blocks ■ Power input from terminal blocks *For more details, please refer to the PDF document or feel free to contact us.
CAN-compatible passive I and Y repeaters! All CAN interfaces of the repeaters comply with ISO 11898!
We would like to introduce the ESD (Electrostatic Discharge) "CAN Repeater" that we handle. It connects two or three CAN networks. It features a CAN interface compliant with ISO 11898-2, with a maximum bit rate of 1 Mbit/s. Thanks to high-speed logic circuits, it guarantees complete transparency and perfect arbitration for all CAN objects in the connected networks. 【Features】 ■ Expansion of CAN networks ■ Improvement of CAN bus load capacity by network participants ■ Industry-appropriate design ■ Operating voltage range: 8V to 30V ■ Guarantees complete transparency and perfect arbitration * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.
HD-SDI repeater that can extend the wiring distance of Full HD cameras.
■Features ● By using a repeater, the wiring distance from the camera can be extended. ● By connecting a repeater (VH-RV300) to the combination of the HD-SDI converter (VH-DP100) and the HD-SDI power overlay unit (VH-VP200), the wiring distance can be extended.
RS001R repeater that can extend RS485 signals up to 2,400m using UTP cable!
- Extends 2-wire RS485 signals up to a maximum of 1,200m at both ends. (By receiving and re-outputting the RS485 signal, transmission of up to 2,400m is possible.) - Supports 2-wire half-duplex communication. - Communication speed supports up to a maximum of 115200bps. - Insulation structure up to 2.5kV.
PoE/PoE Plus compatible Ethernet repeater that can extend up to 500m for 10/100/1000M!
JPX201 / JIPX201 (waterproof type) is an Ethernet repeater that supports 10/100/1000M PoE/PoE Plus power supply. It operates via PoE or PoE Plus power supply and extends Ethernet up to 200m. Additionally, it can connect up to 4 devices, allowing for an extension of up to 500m. It is capable of supplying power to devices compatible with PoE or PoE Plus.
HDMI 4K compatible repeater HR01-4K6G that amplifies/corrects and reoutputs attenuated HDMI signals!
The HR01-4K6G is an HDMI repeater that amplifies and corrects attenuated HDMI signals for re-output. - Supports HDMI video signals up to 4K 60Hz 4:4:4 - Capable of transmitting signals up to 18Gbps - Audio supports LPCM 7.1CH 192kHz 24bit, Dolby TrueHD, DTS-HD MA - Compatible with HDCP 1.4/2.2 - CEC pass-through - Power adapter included *The transmission distance depends on the specifications of the cable used.
Gigabit-compatible Ethernet repeater SR01X that can extend Ethernet up to a total of 240m, with a maximum of 120m on each end!
The SR01X is a gigabit-compatible Ethernet repeater that can extend Ethernet transmission, which typically can only reach 100 meters with a standard LAN cable, up to a total of 240 meters, with a maximum of 120 meters at each end. By using multiple units of this device, you can further extend the transmission distance.
10/100/1000Mbps PoE+ compatible Ethernet power supply repeater IP04R!
The IP04R is a PoE+ compatible Ethernet power supply repeater for 10/100/1000Mbps. - Extends Ethernet wiring by over 100m - Supports IEEE 802.3bt (PoE++ 90W) and supplies up to 50W (for 100m on both ends) - Allows connection between IP04Rs with a maximum of 140m LAN cable - Compatible with IEEE802.3af/IEEE802.3at/IEEE802.3bt - Supports AutoMDI/MDI-X - Does not require power supply to the IP04R as it operates on PoE - Can supply power to connected PoE powered devices - Can connect LANs with different communication speeds such as 10BASE-T and 1000BASE-T - Built-in ESD (electrostatic discharge) protection - No configuration required *Note: It does not support connections to devices other than PD (powered devices). (Cannot be used for extending between Ethernet switches, etc.)
PHANTA Camera Link Splitter/Repeater Full/Medium/Base Compatible
The PHANTA family is designed to allocate images captured by CameraLink cameras to multiple frame grabbers and can be applied to centralized parallel image processing, image monitoring, and real-time image analysis. The entire PHANTA series supports a maximum pixel clock rate of 85 MHz. User applications include: 1) 1-to-4 splitter: full/medium/base configuration 2) Two integrated 1-to-4 splitters: base configuration 3) 1-to-8 splitter: base configuration A master frame grabber can be designated for control and camera settings. Image data and camera control signals can be independently controlled via DIP switches or through the COM port of a PC, with pixel clock-controlled image data being equally transmitted in sync to all frame grabbers.
CLEVER Camera Link Splitter/Switch/Repeater
The CLEVER family consists of products with four different functions capable of splitting, repeating, and switching Camera Link camera data, and supports all models of Camera Link cameras up to 85MHz. All models have a repeater function that doubles the link distance. Furthermore, CLEVER products offer options for PoCL passthrough, PoCL sharing, and PoCL enablement, allowing for a choice of power supply methods with PoCL-compatible cameras and frame grabbers.
The MIL1394 repeater is a solution for cable extension.
MIL1394, like the commercial IEEE1394 FireWire, has limitations on the length of the connection cable. Therefore, to extend a 1394 connection, it is necessary to use thicker wires or add signal repeaters. DapTechnology has developed a wide variety of repeater models, offering about 25 different configurations, including simple pass-through, multi-pass-through, fiber optic conversion, and EMI-enhanced solutions. Various cable harnesses are also available, using the proven GORE FireWire cables. ■ Technical documentation in Japanese for AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp ■
The 1U size allows for space-saving, enabling high-capacity long-distance transmission and reduction of fiber costs through center interconnection.
The transmission port features detachable 8 pairs of multi-rate SFP/SFP+ ports, capable of transmitting up to 80G of unidirectional/bidirectional single-core or dual-core signals using WDM, or 40G of bidirectional signals in two sets of single-core. Optionally, high-density WDM filters and amplifiers can be added within the same chassis, enabling space-saving long-distance transmission. This allows for significant total cost reductions in fiber costs and network nodes. The transmission ports can also be paired to function as independent repeaters (media converters) for up to 8 units. The DCWDM2108H is equipped with FEC functionality, enabling high-quality communication and remote monitoring (monitoring of the remote device OTN61002). It includes local and remote monitoring capabilities via LAN and OSC (SNMP/syslog), as well as local monitoring through a serial console and office alarm contacts.
The 1U size allows for space-saving, enabling large-capacity long-distance transmission and reduction of fiber costs through center interconnection.
The transmission port features detachable 8 pairs of multi-rate SFP/SFP+ ports, capable of transmitting up to 80G in a single-core/dual-core bidirectional configuration or 40G in two sets of single-core bidirectional using WDM. Optionally, high-density WDM filters and amplifiers can be added within the same chassis, enabling space-saving long-distance transmission. This allows for significant total cost reductions in fiber costs and network nodes. The transmission ports can be paired and used independently as 8 separate repeaters (media converters). *DCWDM2108 allows for mixed port configurations such as 1GE/OC48/10GE/OC192, but rate conversion is not possible. It is equipped with local and remote monitoring functions (SNMP/syslog) via LAN and OSC, as well as local monitoring through a serial console and office alarm contacts.
10G OTN repeater series compatible with 2-channel multi-service.
OTN61002 is a 10G OTN repeater that supports 2-channel multi-service. It can operate as a remote terminal in point-to-point applications or applications using the DCWDM2108H series. FEC functionality is applied for each channel, achieving excellent communication performance with an average coding gain of 10%. 【Features】 ◆ 2-channel transponder card ◆ Compliant with ITU G.709 and G.975 I.4 ◆ Supports GFEC or EFEC functionality ◆ In-band management features (remote configuration and performance monitoring) ◆ Can be used as a remote standalone device without a local management card ◆ Dying GASP functionality ◆ Planned in-band monitoring/management support via management card* *For more details about the product, please contact us directly.
A compact and robust wireless repeater that doubles the communication area of the PD798Ex and eliminates dead zones.
● HR658 (HR-658) is a digital specific low-power repeater manufactured by Hytera. ● It is a wireless relay device for the specific low-power explosion-proof radio PD798Ex (for PD798EXLDR / PD798EXLADR only). ● By communicating through the digital specific low-power repeater HR658, the communication distance can be doubled (theoretical value). This helps to double the call area and eliminate dead zones. *Note: HR658 does not amplify the radio waves; it retransmits at the same output as HR658. ● It is IP67 dustproof and waterproof. ● It meets the U.S. military MIL-STD-810H standards, ensuring high durability. ● It operates on a household power supply of AC100V. ● To utilize the relay function, it is necessary to add a repeater-compatible license (for a fee) to the existing specific low-power explosion-proof radio PD798Ex. ● HR658 is not intrinsically safe explosion-proof, so it must be installed outside of explosion-proof areas. ● It complies with the technical standards of the Ministry of Internal Affairs and Communications. ● The manufacturer's warranty period is one year. *For more details, please refer to the PDF materials or feel free to contact us.
Can be used as a space optical repeater for CC-Link! Easy optical axis adjustment.
The "SOT-MQ82/MQ162 series" can be used as a spatial optical repeater for CC-Link. It transmits CC-Link data via light, allowing for the replacement of cable-based optical wireless communication. Additionally, it can transmit the optical reception status to the master station, making optical axis adjustment easy. The communication speeds supported are 2.5M, 625k, and 156kbps. It can switch to channels with different transmission carrier frequencies using a dip switch, enabling interference-free communication with up to two opposing devices in the same straight line or in parallel. 【Features】 ■ Usable as a spatial optical repeater for CC-Link ■ Data transmission via light ■ Capable of replacing cable-based optical wireless communication ■ Transmission of optical reception status to the master station ■ Easy optical axis adjustment *For more details, please refer to the PDF document or feel free to contact us.
![[For new installations and updates!] Universal Repeater](https://image.mono.ipros.com/public/product/image/6f0/2000845802/IPROS42119811287274254181.png?w=280&h=280)
Over 30 years of experience! We convert analog telephone line interfaces.
Nishimu's ultra-long-selling product "Universal Repeater" relays telephone line calls and ringing signals! With the HYB function, it is capable of branching analog lines and converting between 2W and 4W. 【Features】 ■ Can be connected to various devices (automatic telephone lines [switchboards, telephones], common battery telephone lines, FAX lines) ■ Supports HYB function and 2W/4W conversion ■ Easy to expand the circuit board ■ Compatible with DC48V and 24V power supplies (selectable) *For more details, please refer to the PDF materials or feel free to contact us. The product site can be viewed at the URL below.
Supports DisplayPort 1.2! Data can be transmitted without compression or scaling.
We would like to introduce the DisplayPort repeater 'DPAX' handled by San-In Instrument Co., Ltd., which supports DisplayPort 1.2. Thanks to its compact design, it can transmit 4K UHD (3840x2160) over a distance of up to 18 meters in environments using DisplayPort cables, without data compression or scaling when using premium-grade DisplayPort cables. It can be used in digital signage, medical imaging, and other environments utilizing DisplayPort. 【Features】 ■ Supports DisplayPort 1.2 ■ Supports ultra-high definition (3840x2160) / 60Hz ■ Data recovery function ■ Maximum transmission distance of 18m (when using premium DisplayPort cables) - 3m from source to display for DP1.2 - 5m from source to display for DP1.1 *For more details, please refer to the PDF document or feel free to contact us.
Continuously control increasing digital devices. The compact design allows for smart installation in cabinets.
- It relays remote control signals to areas where direct infrared signals cannot reach. This infrared relay device allows for smart storage of the increasing number of digital devices within cabinets. It receives remote control signals with a compact receiver and relays them to areas inside the cabinet or in blind spots where the remote control cannot reach. - Supports up to 12 devices. With one receiver, it can standardly distribute and relay signals to 8 devices, and with an optional additional purchase, it can support up to 12 devices. Additionally, the receiver can be expanded to a total of 3 units with optional purchases, allowing coverage of every corner of the room. - Discreet receiver and compact body that can be installed anywhere. The slim design (coin-sized) of the discreet receiver and the compact body allow for use without worrying about installation locations, even in narrow cabinets.
