Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
1021～1050 item / All 1973 items
Stainless steel knurled screw with step φ8×H8 degreased
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor equipment where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas that require angle or position adjustments. It is compliant with EU-RoHS standards.
Stainless steel knurled screw with step φ8×H10, degreased.
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor equipment where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas that require angle or position adjustments. It is compliant with EU-RoHS standards.
Stainless steel knurled screw with step φ10×H8, degreased.
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor equipment where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas that require angle or position adjustments. It is compliant with EU-RoHS standards.
Stainless steel knurled screw, stepped, φ10×H10, degreased.
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor devices where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas that require angle or position adjustments. It is compliant with EU-RoHS standards.
Stainless steel knurled screw, stepped, φ10×H12, degreased.
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor devices where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas that require angle or position adjustments. It is compliant with EU-RoHS standards.
Stainless steel knurled screw with step φ12×H12 degreased
This is a hand-tightening screw made of SUS303 material. It can be used for securing parts of outdoor equipment where corrosion is a concern, and the head itself can be used as a knob. Additionally, since it is a hand-tightening screw, it is suitable for areas where angle and position adjustments are needed. It is compliant with EU-RoHS standards.
Brass long screws and full screws
It is a screw without a head, consisting only of the threaded part. Brass has excellent conductivity and is suitable for use in high and low voltage devices and conductive parts. It is also referred to as a long screw, full screw, or cut screw. It is compliant with EU-RoHS standards.
Aluminum + small pot screw
It is a representative type of screw that is widely used in various fields. It is compliant with EU-RoHS standards.
Aluminum + small plate screw
It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. The material being fastened needs to be countersunk. It is compliant with EU-RoHS standards.
Aluminum + truss screw
The head shape is like the upper part of a sphere that has been cut off. Compared to other heads, it has a larger outer diameter, allowing for a wider contact area on the seat surface. It is compliant with EU-RoHS standards.
Aluminum hexagonal socket low head screw
This is an ultra-low head series ideal for mobile devices and slim devices. Made of lightweight aluminum, it weighs about one-third that of iron or stainless steel. With minimal protrusion of the head, it is a sleek-looking screw.
Titanium + small pot screw
This is a representative type of screw that is widely used in various fields. It is compliant with EU-RoHS standards.
Titanium alloy + small pan screw
This is a representative type of screw that is widely used in various fields. It is compliant with EU-RoHS standards. *Depending on the degree of the oxide film, the surface may appear blue.
Titanium + small pan screw with nylon washer
This is a pan head screw incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.
Titanium + small plate screw
It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. It is necessary to perform a countersink on the material being tightened. It is compliant with EU-RoHS standards.
Titanium alloy + small plate screw
It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. It is necessary to perform a countersink on the material being tightened. It is compliant with EU-RoHS standards. *The surface may appear blue due to the degree of oxidation.
Titanium hex socket set screw with a recessed tip
This is a screw with a head that has the same shape as the threaded part and features a hexagonal hole. It is tightened using a hexagonal rod wrench (hex key). It is used when the tip of the screw is pressed against the counterpart to secure it. Because the tip of the screw is recessed, it may leave a circular mark on the counterpart. It is also known as a hollow set or set screw. It is compliant with EU-RoHS standards.
Titanium flat washer
When the hole diameter of the material being fastened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, it enhances the contact with the material. It is also referred to as a washer or flat washer. It is compliant with EU-RoHS standards.
Ceramics + small pot screws
This is a representative type of screw widely used in various fields. It excels in heat resistance, wear resistance, and corrosion resistance, making it suitable for use in corrosive environments. It demonstrates high reliability that surpasses metals and resins. It is compliant with EU RoHS standards.
Ceramics flat washer
When the hole diameter of the material being fastened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, the adhesion to the material can be enhanced. It is also referred to as a washer or flat washer. It is compliant with EU-RoHS standards.
PTFE (Teflon) slotted flat head screw
The cylindrical head has a slot cut into it. A flathead screwdriver is used for tightening. It has excellent heat resistance, chemical resistance, electrical properties (high-frequency characteristics), non-stick properties, and self-lubricating properties. It is compliant with EU RoHS standards.
PFA flat head screw with a slotted drive
The cylindrical head has a slot cut into it. A flathead screwdriver is used for tightening. It is suitable for materials in the semiconductor field that are not affected by most chemicals and are in constant contact with highly active chemical substances. It is compliant with EU RoHS standards.
PEEK (Peak) Hexagon Socket Set Screw - Flat Tip
This is a screw with a head that has the same shape as the threaded part and features a hexagonal hole. It is tightened using a hexagonal rod wrench (hex key). It is used when the screw tip is pressed against the counterpart to secure it. Because the screw tip is flat, it is suitable for applications where you do not want to scratch the counterpart. PEEK demonstrates the highest level of chemical resistance and excels in high-temperature characteristics, wear resistance, hydrolysis resistance, and electrical properties. It is widely used in the automotive, office automation equipment, and semiconductor manufacturing equipment fields. It is also referred to as a "hollow set" or "set screw." It complies with EU-RoHS standards.
PEEK (Peak) Precision Equipment Type 0, Class 1 + Small Plate Screw
This is a precision small screw for M1.2 to M1.6 devices made of PEEK. PEEK demonstrates the highest level of chemical resistance and excels in high-temperature properties, wear resistance, hydrolysis resistance, and electrical properties. It is widely used in the automotive, office automation equipment, and semiconductor manufacturing equipment fields. A #0 size Phillips screwdriver is suitable. It complies with EU-RoHS standards.
PPS + small pot screw
This is a representative type of screw that is widely used in various fields. It has excellent heat resistance and can be used for long periods in high-temperature environments. It has excellent chemical resistance, and there are no oils or solvents that can dissolve PPS below 200°C. It is compliant with EU-RoHS standards.
PPS + small pan screw with PTFE washer
This is a small screw with a PTFE washer set (TTS series) incorporated. It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent heat resistance, chemical resistance, electrical properties (high-frequency characteristics), non-stick properties, and self-lubricating properties. It is compliant with EU-RoHS standards.
PVDF + small pan screw
This is a representative type of screw that is widely used in various fields. It has high mechanical strength and excellent resistance to chemicals, wear, and impact. PVDF (polyvinylidene fluoride) is a material that shows no change in strength after 20 years of outdoor exposure testing and is also resistant to weathering (UV). It is compliant with EU-RoHS standards.
PVDF flat washer
When the hole diameter of the material being tightened is larger than that of the screw, it can stabilize the screw head. By increasing the surface area of the screw head, it enhances the adhesion with the material. It is suitable for use in areas that need to be insulated. It prevents damage to the material being tightened at the surface of the screw head. It also excels in chemical resistance, wear resistance, and impact resistance. PVDF (polyvinylidene fluoride) is a material that shows no change in strength after 20 years of outdoor exposure testing and is also resistant to weathering (UV). It complies with EU-RoHS standards.
PC + small pan screw
This is a representative type of screw that is widely used in various fields. Polycarbonate is a material that is impact-resistant and has self-extinguishing properties. It is compliant with EU-RoHS standards.
PC + small plate screw
It is a small screw with a flat top and a conical-shaped seating surface. It is used when you do not want the head of the screw to protrude. The material being fastened needs to be countersunk. Polycarbonate is a material that is impact-resistant, transparent, and self-extinguishing. It is compliant with EU-RoHS standards.
