Tester Product List and Ranking from 42 Manufacturers, Suppliers and Companies

PICMA Tack Tester (Rubber Tack Tester)

The PICMA Tack Tester measures tacking strength between un-vulcanized rubber and un-vulcanized rubber or other materials. Tacking strength of other adhesive materials can also be measured.

• Company：東洋精機製作所
• Price：Other

• Testing Equipment and Devices
• Viscometer

Non-contact hardening evaluation device Cure Tester 'DH-1' [Testable]

Using digital holography, we have achieved measurement and visualization of 3D objects! It is possible to manage the drying state in seconds.

This product applies digital holography technology to non-contact and quantitative evaluation of the drying and curing processes of paints and adhesives, visualizing the drying distribution. By understanding the drying process, it enables the optimization of manufacturing lines and allows for the calculation of the necessary amount of paint and the setting of drying times based on the desired painting conditions. Furthermore, it is expected to be applicable to the evaluation of the curing process of light-curable adhesives and the drying and curing analysis of ink dots, contributing to printable electronics.

• Company：東洋精機製作所
• Price：Other

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments

Carbon Dioxide Volume Tester Direct Gv-1

Direct Gv-1 dramatically improves both the accuracy and efficiency of measuring carbon dioxide volume.

The basic measurement principles remain unchanged, so you can obtain the same results as before with greater accuracy and efficiency. Is the hand-held device you are currently using working well? If you are using a hand-held device from a company other than ZAM, please give ZAM's DT-Piercing Device a try. You will likely notice the difference in usability. ZAM is a long-established manufacturer of measurement instruments in the U.S. beverage industry and is widely used around the world like standard equipment. However, in Japan, many factories seem to be using counterfeit products due to the hassle of obtaining genuine ones and high prices from import costs. At Bixul, we have started direct import sales with the goal of "world-class products at local prices," so please give it a try.

• Company：ビクスル
• Price：Other

• Gas Generator

Battery-operated digital pressure gauge BQSL vacuum pressure tester

By using BQSL VPT, you can measure, check the results, and record them. It's a big difference!

The BQSL vacuum pressure tester is a battery-operated digital pressure gauge equipped with a semiconductor strain gauge sensor specifically developed for measuring the vacuum level or internal pressure of hot pack beverages/foods.

• Company：ビクスル
• Price：Other

• Other semiconductor manufacturing equipment

D-T Piercing Device Series 6000

This is a device for testing the gas volume of carbonated beverages in cans, bottles, and PET bottles.

The Piercing Device Series 6000 is a tool for testing the gas volume of carbonated beverages, regardless of whether they are in glass bottles, PET bottles, or cans. It is equipped with a dual-scale pressure gauge (0-60 psi & 0-4.2 kg/cm²) and an adjustable 2-inch dial thermometer (25/125ºF & -5/55ºC), and there are types available for measuring up to 1 liter and 3 liters. With the Series 6000 Piercing Device, it is necessary to use the included chart to convert the gas volume; however, by replacing the pressure gauge and thermometer with the DGV-1, it becomes the Series 14000 (DGV-1 Piercing Device), allowing for easier and more accurate measurement of gas volume. For more details, please contact us or refer to the catalog.

• Company：ビクスル
• Price：Other

• Beverage Production Equipment
• Food Testing/Analysis/Measuring Equipment

Battery-operated digital pressure gauge BQSL vacuum pressure tester

This is a digital display pressure gauge specifically for measuring the vacuum level or internal pressure of beverages/food.

The BQSL Vacuum Pressure Tester is a battery-operated digital pressure gauge equipped with a semiconductor strain gauge sensor, specifically developed for measuring the vacuum level or internal pressure of hot pack beverages/foods. In addition to being robust and highly accurate, it features excellent functionalities that are difficult to achieve with Bourdon tube analog pressure gauges, allowing for easier and more precise measurement of internal container pressure. Furthermore, using a dedicated piercing stand makes measurement even simpler and more reliable. For more details, please contact us or refer to the catalog.

• Company：ビクスル
• Price：Other

• Food Testing/Analysis/Measuring Equipment
• Pressure

Inline Fully Automatic Tester ALMAX

The cooperative test system offers a variety of inspection equipment for the manufacturing process of implementation boards. We can provide proposals that perfectly match your production line.

The cooperative test system offers a variety of inspection equipment for the implementation of circuit board manufacturing processes. We have base machines for each process, allowing us to provide proposals that perfectly match your production line.

• Company：協立テストシステム
• Price：Other

• Other machine tools

Next-generation compact high-performance SFP in-circuit tester "i1000D"

It is equipped with inline functionality and has become fully automatable.

The "Agilent Medalist i1000D" is a high-performance in-circuit tester for PCB manufacturing lines, classified as the smallest in the industry and designed for the next generation. Additionally, it provides true digital test coverage with features such as boundary scan testing, on-board programming, library-based digital testing, and per-pin programmable digital drivers/receivers. 【Features】 ○ Achieves industry-leading test coverage ○ Flexible digital testing with low-cost fixtures ○ Equipped with Agilent's latest technology For more details, please contact us or download the catalog.

• Company：協立テストシステム
• Price：Other

• Other inspection equipment and devices
• Circuit Board Inspection Equipment

Composite Leak Tester

A new concept leak tester using water and air as mediums.

For leak testing of components that require vacuum and airtightness, testers utilizing vacuum pumps and helium detectors have primarily been used until now. Our leak tester is a device that dramatically improves the difficulties and long testing times associated with existing methods. It uses water and air as testing media, reduces the testing time to 2 to 5 minutes, and also has the capability to save the test results as data.

• Company：インテリンク
• Price：Other

• Other inspection equipment and devices
• Other laboratory equipment and containers
• Sealing

Helium leak testing contract services [Free technical materials and case study booklet available!]

【Technical Data Presentation】 No need to purchase equipment or introduce testing process facilities! A leak testing service that can handle accurate airtightness testing from just one product!

The "Helium Leak Testing Service" provided by Javic is a service used for evaluating the airtightness (leak testing) of products where even the slightest leak is unacceptable. You may not be able to purchase expensive equipment to conduct helium leak tests for a single product. You might not fully understand the testing methods. You may not want to damage the materials. You might not be able to invest in the costs of introducing testing process equipment. Examples of solutions to these concerns are also included. 【Service Features】 ■ Available for even a single product! ■ Uses helium gas, so there is no impact on materials or the human body ■ No need for the introduction of actual equipment ■ Achieves high-precision airtightness testing ■□■ Currently, we are distributing technical materials and case study booklets on helium leak testing for free! ■□■ *For more details, please download the "Case Studies & Technical Materials" from the catalog download.

• Company：ジェイビック
• Price：Other

• Testing Equipment and Devices

Heat displacement correction device "Stealth Ultima IIS16"

Reduce testing labor with a 16-channel temperature sensor! Implementable at a lower cost.

The "Stealth Ultima IIS16" is a high-performance thermal displacement correction device for machine tools and related industrial equipment. This product can achieve an absolute correction with a precision of 1μm and a command value accuracy of +0.01μm using high-precision temperature sensors (thermistors). It supports a wide range of temperature measurements and enables monitoring such as abnormal temperature warnings. Furthermore, if the temperature sensor becomes disconnected after the device is installed, the number of the disconnected temperature sensor can be confirmed on the PC software. This allows for quick recovery from disconnections during experiments or after device installation. 【Features】 ■ Reduces testing labor with 16-channel temperature sensors ■ Allows input of multiple correction formulas with 10-axis correction ■ Simplifies alarm response with disconnection information identification ■ Capable of monitoring a wide range from -10 to 70°C ■ Easy to introduce at a low cost *For more details, please refer to the PDF materials or feel free to contact us.

• Company：エムシー技研
• Price：Other

• Other measurement, recording and measuring instruments

Laser Diode Chip Tester [LD2900MTB]

Achieve an efficient configuration targeting communication LDs.

This device is an LD test system that automatically measures and sorts the electrical and optical characteristics of long-wavelength (optical communication) laser diodes in bare chip state at high speed. <Features> ■ LD chips affixed to a blue sheet can be supplied and stored in a gripping ring state. High-speed fully automated transport from supply to measurement and classification. ■ Measurement items (front/back LIV, λ characteristics) can be measured as standard items under one temperature environment. ■ Measurement and sorting can be performed at any temperature from -40°C to +95°C. ■ Simultaneous measurement of FRONT light and BACK light IL is possible. ■ The SH gauging method is adopted for chip positioning. ■ The use of a focusing lens method has eliminated the alignment time for wavelength measurement. ■ Up to 9 cameras monitor the presence and condition of LD chips at each position. This allows for easy understanding of operating conditions and adjustments of various parts.

• Company：アルファクス
• Price：Other

• Analytical Equipment and Devices

VWP5040A VCSEL Probing Wafer Tester

Automatic measurement of optical and electrical properties is possible! This is an auto-prober compatible with multi-beam VCSELs.

This device is an LD test wafer prober that automatically measures the electrical and optical characteristics of VCSEL laser diodes in wafer form under ambient conditions ranging from room temperature (20°C) to high temperature (95°C). <Features> ■ Automatically measures the characteristics of multi-beam VCSELs in wafer form. ■ Combines ALPHAX's measurement technology with MPI's VCSEL wafer prober. ■ MPI is a leading LED prober manufacturer in Taiwan. ■ Measurement items include I-L, I-V, λ, NFP (OPTION), FFP (OPTION). Continuous measurements are performed for each item with a single unit. ■ Achieves high-speed and high-precision measurements. For more details, please download the PDF or feel free to contact us.

• Company：アルファクス
• Price：Other

• Analytical Equipment and Devices

Midland Crack Detection Device Pole Tester

With the automatic analysis feature, anyone can easily make judgments and assess deterioration.

It is possible to introduce ultrasound into concrete poles using a uniquely developed jig.

• Company：エッチアンドビーシステム
• Price：Other

• Other measurement, recording and measuring instruments

D Muscle Chuck DCH / Techno Tester Graph・Report

Verification test of irregular-shaped rebar / TechnoTester measurement support software

The "D Bar Chuck DCH" allows for immediate setup without the need for threading on D bars during the confirmation test of deformed rebar. Its easy-to-remove design shortens testing time and improves work efficiency. The "Techno Tester Graph" is a measurement support software that can display load and displacement graphs in real-time. The "Techno Tester Report" is software that allows you to import data saved on the testing machine to a computer, making it ideal for report creation. Please inquire about compatible testing machines and software. For more details, please contact us or view the catalog on our website. "D Bar Chuck" https://sanko-techno.co.jp/products/tester/dch/?parent_url=https://sanko-techno.co.jp/products/fastening/tester/ ☆ On our website, you can view technical documents (test reports, CAD data, product specifications, material certificates, etc.). *Membership registration required (free).

• Company：サンコーテクノ
• Price：Other

• Software (middle, driver, security, etc.)