Testerのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Tester×安田精機製作所 - メーカー・企業と製品の一覧

Testerの製品一覧

1～15 件を表示 ／ 全 28 件

表示件数
101-H Tapered Ablation Tester

101-H Tapered Ablation Tester

It is a wear testing machine that accommodates a wide range of tests for plastics, rubber, building materials, textiles, and more!

- This is a Taber wear testing machine (Taber type ablator) for evaluating the wear resistance of flat materials using wear wheels. - A pair of wear wheels is pressed against a rotating test specimen with a constant load to measure wear mass, wear volume, thickness, optical changes, and more. - Tests can be conducted on a wide range of materials including plastics, rubber, construction materials, decorative panels, leather, paper, woven fabrics, and coatings. - Available in single-wheel and dual-wheel types. <Reference Standards> JIS-A1453, (K5400), K5600-5-8/9, K5665, K6264-2, K6404-4, K6902, K7204, (L1018), L1085, L1096, ASTM-D1044, TAPPI-T476, JAS, (JASO-M403), ISO-4649, 5470-1, 7784-1/2, 9352 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Contract measurement

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
270 Loss Flexing Tester

270 Loss Flexing Tester

This is a testing machine that observes the growth of cracks due to the bending of rubber (such as shoe soles) and evaluates durability.

- We will observe the growth of cracks due to rubber bending and evaluate durability. - We also offer L-shaped specimens for testing in a low-temperature chamber. - After cutting to the specified size, we will use a dedicated jig to drill a hole with a diameter of 2.5±0.01mm at a position of 62±2mm from one end to create the test specimen. - The test specimen will be attached to the testing machine and repeatedly bent from a horizontal position to 45° until either the length of the hole reaches 500%, the combined length of the hole and crack reaches 15mm, or the number of bends reaches 250,000. - The average number of bends required to increase the original hole length by 100% will be calculated until it reaches 500%, which will be used to determine durability. <Reference Standard> ASTM-D1052 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
181-L Film Impact Tester (with Low Temperature Chamber)

181-L Film Impact Tester (with Low Temperature Chamber)

A low-temperature chamber that can test in environments ranging from -30 to 60 degrees! This is a testing machine used to evaluate the impact strength of plastic films, paper, and other materials by pendulum impact testing.

- Attach the test specimen to the adjusted testing machine and release the pendulum. - The amount of work required for the hemispherical impact ball attached to the tip of the pendulum to create a hole in the test specimen is read directly from the scale. - It is equipped with a low-temperature chamber (-30 to 60 °C, refrigeration type). <Reference Standard> ASTM-D3420 [Regarding Catalog Download] Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
181 Film Impact Tester

181 Film Impact Tester

This is a testing machine for evaluating the puncture impact strength of plastic films, paper, and similar materials.

- This is a testing machine for evaluating the impact strength of plastic films, paper, and similar materials. - We also offer an L-type model for testing in a low-temperature chamber. - Attach the test specimen to the adjusted testing machine and release the pendulum. - The hemispherical impact ball attached to the tip of the pendulum directly reads the amount of work required to create a hole in the test specimen from the scale. - There is also a low-temperature chamber type [181-L] that can conduct tests in environments ranging from -30 to 60 degrees. <Reference Standard> ASTM-D3420 <Regarding Catalog Download> Please request the catalog through the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
161 Spring Elongation Tester

161 Spring Elongation Tester

This is a testing machine for evaluating the softness of enamel wire using the spring elongation method.

- A specified weight is hung from one end of the test specimen, and a coil (test specimen) is created by winding it around a mandrel fixed in a horizontal axis chuck at a rotation speed of 50 times per minute. - After measuring the length of the created coil (test specimen), one end is re-fixed in a vertical axis chuck, and a specified weight is attached to the other end, placing the coil (test specimen) on a support table in a non-stretched state. - The support table is lowered at a speed of 50 mm per minute, and after the weight has separated from the support table, it is held for one minute. The weight is then removed, and the coil (test specimen) is left for another minute before measuring its length. - The spring elongation value is calculated from the lengths of the coil (test specimen) before and after the test. <Reference Standards> JIS-(C3003), C3216-3, IEC-60851-3 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
312 Tapered Stefnest Tester

312 Tapered Stefnest Tester

This is a testing machine (Tapered Strength Tester) used to evaluate the brittleness of cardboard using the load bending method.

- The strength of the paperboard is evaluated using the load bending method. - One end of the test specimen is attached to a chuck to create a cantilever beam, and the other end is bent at a specified speed to 15°. - The force required to bend the specimen when the load length reaches 50mm is read from the load scale. - The bending moment and bending resistance are calculated from the read load scale. - A digital type that allows for direct reading of the strength of the paperboard, model [312-D], is also available. <Reference Standards> JIS-P8125, TAPPI-T489, ISO-2493 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
316 Ring Crush Tester

316 Ring Crush Tester

The ring crush test measures the compressive strength of paper and board when rolled into a ring shape and subjected to a vertical load.

- The ring crush method measures the compressive strength of paper and board when wrapped in a ring shape and subjected to vertical load. - The test specimen is attached to a support device consisting of an outer frame and an inner frame. - The specimen is compressed at a specified speed until it collapses. - The maximum compressive force is measured using a load cell. - Optionally, by exchanging fixtures, tests for the adhesive strength of cardboard, as well as flat compression and vertical compression tests, can also be conducted. <Reference Standards> JIS-P8126, ISO-12192 (Options: Z0402, Z0403-1, Z0403-2) 【About Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
360 Curl Size Tester

360 Curl Size Tester

This is a testing machine for evaluating the curl and size of paper using the curl size degree method.

- This is a testing machine for evaluating the curl and size of paper using the curl size degree method. - It is mainly used for printing paper. - Fill the tank with distilled water or drinking water, float the test specimen on the water surface of the test hole, and start measuring the time. - Read the angle indicated at the moment when the curl of the test specimen reaches its maximum and the movement of the curl reverses, and then stop the time measurement. <Reference Standards> TAPPI-(T466), J.TAPPI-No.14 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
549 No Pickup Time Tester

549 No Pickup Time Tester

Test equipment (test roll) suitable for evaluating the drying properties of road marking paint and tire adhesion.

- This is a testing machine (test roll) for evaluating the drying properties and tire adhesion of road marking paint. - A sample is applied to a glass plate with a specified width to create a test piece. After a specified time has elapsed, it is rolled at a constant speed to pass through the specified width of the sample in one second. - The presence of the paint film on the tire after rolling is visually inspected and evaluated. <Reference Standards> JIS-K5665, ASTM-D711 *Specifications are subject to change without notice. [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
145-A Creep Tester (Pulley Type)

145-A Creep Tester (Pulley Type)

Supports tensile, compression, and bending tests! There is also a type that can perform stress relaxation tests.

- This is a testing machine (creep testing machine) that applies static load to plastic and measures the strain (creep) that increases over time. - By changing the chuck (gripping device), it can accommodate tensile, compression, and bending tests. - We also offer types that can conduct stress relaxation tests. - After conditioning the specimen to the specified state and measuring its dimensions, it is attached to the chuck, and the specified load is applied. Then, the strain of the specimen is measured at specified intervals. The tensile creep modulus is calculated from the measured time and strain. <Reference Standards> JIS-K7115, ASTM-D2990, ISO-899-1 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
145-SV Creep Tester (Servo Type)

145-SV Creep Tester (Servo Type)

A creep tester that achieves space-saving and reduces impact during sample fracture!

- This is a creep tester (creep testing machine) that changes the loading method from a real load type to a servo motor-driven method, achieving space-saving and reducing impact during sample fracture by detecting load with a load cell. - By changing the chuck (gripping tool), tensile, compression, and bending tests can be performed. - We also offer types that can conduct stress relaxation tests. <Reference Standards> JIS-K7115, ASTM-D2990, ISO-899-1 (Creep Test), JIS-K6263, ISO-3384 (Stress Relaxation Test) 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
145-B Creep Tester (Balance Type)

145-B Creep Tester (Balance Type)

Measure the strain (creep) that increases over time! Compatible with tensile, compression, and bending tests!

- This is a testing machine (creep testing machine) that applies a static load to plastic and measures the strain (creep) that increases over time. - By changing the chuck (gripping device), it can accommodate tensile, compression, and bending tests. - We also offer types that can conduct stress relaxation tests. - After conditioning the specimen to the specified state, it is attached to the chuck, and a specified load is applied. Then, the strain of the specimen is measured at specified intervals. The tensile creep modulus is calculated from the measured time and strain. <Reference Standards> JIS-K7115, ASTM-D2990, ISO-899-1 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
148-HDA Heat Distortion Tester (Fully Automatic)

148-HDA Heat Distortion Tester (Fully Automatic)

【New Catalog Completed!】The testing process is fully automated by robotic mechanisms! Up to 120 test pieces can be measured continuously.

- This is a testing machine (HDT tester, HDT testing device, heat distortion tester) for measuring the heat deflection temperature of plastics and evaluating their heat resistance. - By simply inputting the test conditions, placing the test specimens into the cassette, and setting the cassette, up to 120 test specimens can be measured continuously. - The test specimens can be set on the frame through sample transport. - The test specimens are automatically collected and disposed of. - It provides stable temperature rise accuracy, ensuring reliable test results. - By replacing the tip pressure sensor, it supports DTUL testing, VICAT testing, and BP testing (related to the report on the registration system for the ball pressure temperature of thermoplastic plastics used in electrical appliances as per the Electrical Appliance and Material Safety Law (2013) Appendix Table 3, 2(1) (b), 3.2 B method (March 31, 1986, Japan Electrical Manufacturers' Association, Electrical Appliance Research Committee)). <Reference Standards> JIS-K7191-1, K7206, ASTM-D648, D1525, ISO-75-1, 306 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
148-HD500 High-Temperature Heat Distortion Tester

148-HD500 High-Temperature Heat Distortion Tester

【New Catalog Completed!】Supports high temperatures up to 500℃! The constant temperature chamber is a sealed gas chamber type, and the frame uses quartz glass!

- This is a testing machine that measures the heat deflection temperature (HDT test) of plastics and evaluates their heat resistance, capable of handling high temperatures up to 500°C. - The constant temperature chamber is a sealed air chamber type, with each test rack designed to have an independent air layer structure to ensure uniform temperature distribution across the racks. - During testing, air from a fan is directed at the sealed upper part of the chamber to prevent thermal deformation of the air layer chamber's top cover and maintain temperature distribution within the chamber. - The racks are made of quartz glass to eliminate thermal aging and temperature distortion. - It complies with HDT tests, VICAT tests, and BP tests (related to the Electrical Appliance and Material Safety Law (2013) Appendix Table 3, 2(1) Ro, (Ni)b "Registration system for ball pressure temperature of thermoplastic plastics used in electrical appliances" Report 3.2 B method). - Features such as an overheat prevention device, operation indicator lamp, and emergency stop button ensure high safety from the user's perspective. <Reference Standards> JIS-K7191-1, K7206, ASTM-D648, D1525, ISO-75-1, 306 【Regarding Catalog Download】 Please request the catalog via the related links below or by contacting us.

  • Testing Equipment and Devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
162-FS Slip Tester (Horizontal Method)

162-FS Slip Tester (Horizontal Method)

It is a testing machine (friction measuring device, coefficient of friction measuring instrument) that measures the static and dynamic friction coefficients of plastic films, paper, etc., using the horizontal method.

- This is a testing machine (friction measuring device, coefficient of friction measuring instrument) that measures the static and dynamic friction coefficients of plastic films, paper, etc., using the horizontal method. - A test piece for the horizontal plate is fixed on the horizontal plate, and a test piece for the weight is fixed in close contact with the weight. - One end of a metal wire is tied to the hook of the weight, which acts as a friction body, and the other end is attached to the load cell. The friction force (static friction force, dynamic friction force) is measured by moving the horizontal plate 50mm. <Reference Standards> JIS-K7125, P8147, ASTM-D3247, ISO-8295, TAPPI-T816 【Regarding Catalog Download】 Please request the catalog from the related links below or contact us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Testerに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.