evaluation Product List and Ranking from 127 Manufacturers, Suppliers and Companies | IPROS GMS

Evaluation of human exposure to in-vehicle devices

Measurement of human exposure to low frequency (1Hz to 400kHz)! Expanding the support range further.

Our organization has introduced a "Magnetic Field Measurement System" that enables frequency domain evaluation synchronized with time domain measurement data, simplifying the measurement to report creation process for human exposure assessment. We are further expanding the scope of support for conformity assessment related to automotive equipment. Please feel free to contact us when needed. 【Features of the Magnetic Field Measurement System】 ■ Long-term recording of measurement data allows for detailed analysis ■ Frequency domain evaluation synchronized with the time axis of time domain assessment ■ Report function for evaluation results supports analysis work ■ Control and display components are consolidated into a PC, achieving miniaturization ■ No complex settings or operations are required, making measurement, analysis, evaluation, and report creation easy *For more details, please download the PDF or feel free to contact us.

Performance evaluation of in-vehicle Ethernet

It is attracting attention as automotive network technology that plays roles such as backbone networks, ADAS, and infotainment!

The organization conducts "performance evaluation of in-vehicle Ethernet" using an advanced measurement system compliant with the "802.3bw 100BASE-T1" standard, which allows for performance evaluation of in-vehicle Ethernet without being affected by the test environment for immunity in vehicles. In recent years, it has become mainstream for vehicles to be equipped with driving assistance devices that control driving, such as automatic brakes, and autonomous driving functions, and it is expected that automation will further advance alongside electrification. "In-vehicle Ethernet" is gaining attention as a vehicle network technology that plays roles in backbone networks, ADAS, and infotainment. 【Communication Method and Specifications (100BASE-T1)】 ■ During immunity testing, the SQI value and BER are measured in loopback mode, and signal errors can be visually confirmed instantly. ■ The effective data rate is measured for the number of transmitted/received bits and packets, as well as the number of error bits/packets. ■ Emission measurements during the transmission and reception of PRBS are also possible, making it widely usable for EMC testing. *For more details, please download the PDF or feel free to contact us.

Evaluation of physicochemical and biological equivalence of biosimilars.

Comprehensively supporting the early development of biopharmaceuticals on an independent platform.

Physical and Chemical, as well as Biological Equivalence of Biosimilars | Similarity Assessment 【Expertise】 Industry-leading experience with over 12 biosimilar molecules and more than 30 biosimilar development companies 【Speed to Market】 Cost-effective results guaranteed through a comprehensive lineup of ready-made assays for the characterization and equivalence | similarity assessment of biosimilars 【Higher Quality Assurance】 Providing the necessary data for submission at the time of application, backed by exceptional regulatory and industry insights

Contract Development: Evaluation of In-Vehicle Software Using HILS

We provide total support for vehicle software evaluation in a one-stop service!

Our company provides engineering services related to in-vehicle software evaluation using HILS (Hardware-in-the-Loop Simulator). We have extensive experience in software testing specialized in communications such as OTA and security, as well as a wide range of HILS applications for in-vehicle systems! (Powertrain / ADAS / OTA / Security Certification / Solar Charging / Autonomous Driving) 【Features】 ■ Flexible response to various test cases (environment setup) - Please consult us for any cases, including new simulator construction and modifications to existing simulators. ■ Rich knowledge necessary for in-vehicle software evaluation - Deep understanding of in-vehicle ECUs and system specifications - Comprehension of the operation of in-vehicle ECUs and systems - Knowledge of evaluation environments (simulators) - Knowledge of methods such as test automation - Extensive experience with OEMs We provide total support for evaluation specification consideration, evaluation environment setup, and evaluation implementation! *For more details, please feel free to contact us.

Contract development for OTA evaluation for automotive OEMs.

We provide total support for OTA evaluation for automotive OEMs in a one-stop service!

Our company provides engineering services for OTA evaluation aimed at automotive OEMs using various network interfaces. We also have a track record of supporting suppliers. We possess not only the necessary security knowledge for OTA evaluation but also expertise in in-vehicle networks, allowing us to handle everything from the construction of evaluation environments to the evaluation itself! 【Features】 ■ Flexible support for various network communications - DoCAN - DoIP - Control system CAN/Eth ■ Extensive knowledge related to vehicle ECU reprogramming - Basic concepts of sequencing - Knowledge of ECU power and startup conditions, etc. ■ Comprehensive understanding necessary for development and evaluation for automotive OEMs - Deep understanding of in-vehicle ECU and system specifications - Grasp of in-vehicle ECU and system operations - Knowledge of evaluation environments (simulators) - Knowledge of methods such as test automation - Rich experience in OEMs We provide total support for evaluation specification consideration / evaluation environment construction / evaluation implementation! *For more details, please feel free to contact us.

[Handbook Presentation] Analysis and Evaluation

In "Evaluation and Analysis of Li-ion Batteries," a series of evaluations including prototyping, testing, battery disassembly, and non-atmospheric exposure analysis is possible.

Our company supports trouble resolution with advanced technology and cutting-edge equipment cultivated in the electronics field. This document includes "areas of support" such as "MSEC's analysis and evaluation support areas," "analysis case studies" like "comprehensive analysis of Li-ion batteries," and "introduction of analytical equipment." Please feel free to download and take a look. 【Contents (partial)】 <Areas of Support> ■ MSEC's analysis and evaluation support areas ■ Comprehensive analysis system for power devices and modules <Analysis Case Studies> ■ Front-end analysis ■ Power device package defect analysis *For more details, please refer to the PDF document or feel free to contact us.

Response to the molding of test specimens and evaluation of mechanical properties (mechanical characteristics).

High-precision parallel pressing + high repeatability + high-speed temperature control! Achieve material prototype development with high reproducibility and moldability.

Our company provides total support for the prototype development and mass production of carbon fiber reinforced resin, as well as comprehensive support regarding test specimens. With a unique motion that combines position control and load control, we enable high-speed and high-precision molding of carbon fiber reinforced resin. "ZENFormer" eliminates concerns such as slide parallelism dependent on guides and variations in bottom dead center repeatability, which are common in conventional presses. 【Materials (Examples)】 ■ Chopped materials ■ UD materials ■ Non-woven fabrics ■ Cross materials ■ FAB ■ Fiber reinforced materials *For more details, please refer to the related links or feel free to contact us.

Musculoskeletal Model Muskejo - Evaluation of the Effectiveness of Physical Therapy

Muskejo is the world's first musculoskeletal model capable of biomechanical analysis at the joint tissue level.

Based on the musculoskeletal model Muskejo, it is possible to quantitatively evaluate the reduction of load on the knee joint in rehabilitation therapies such as electrical stimulation therapy. Therefore, it can contribute to the prevention of joint pain and the guidance and development of rehabilitation therapies.

Musculoskeletal Model Muskejo Evaluation of Knee Brace Therapy

Muskejo is the world's first musculoskeletal model capable of biomechanical analysis at the joint tissue level.

Based on the musculoskeletal model Muskejo, we will evaluate the functionality of the brace by simulating joint movements with the brace attached and investigating changes in joint motion and the mechanical quantities of soft tissues.

Analysis and Reliability Assessment

From visual observation of the implementation process to reliability evaluation! We conduct rapid analysis and assessment by our in-house engineers.

We would like to introduce the analysis and reliability evaluation conducted by Oki Electric Industry Co., Ltd. Using the know-how accumulated over many years and well-equipped analysis and reliability evaluation facilities, we carry out rapid analysis and evaluation by our in-house engineers. In the visual observation of the mounting process, we observe solder joints using X-ray inspection equipment with CT functionality and monitor the heating process with a reflow simulator. Additionally, we also conduct analysis of mounting composition states and reliability evaluations. Please feel free to contact us if you have any inquiries. 【Analysis and Evaluation Contents】 ■ Visual observation of the mounting process ■ Analysis of mounting composition states ■ Compliance with RoHS and REACH ■ Reliability evaluation *For more details, please refer to the PDF materials or feel free to contact us.

Evaluation of the printed layer on the metal surface

Conduct cross-sectional structural analysis and depth-direction analysis using TOF-SIMS! It is possible to confirm the distribution of components from the surface coating layer to the metal and the coloring components.

As an evaluation of the quality of the printed layer on the metal surface, the bonding state with the metal and the dispersion state of the coloring components can be observed through cross-sectional processing. Additionally, by conducting depth-direction analysis using TOF-SIMS with GCIB from the surface, the distribution of components from the surface coating layer to the metal and the coloring components can be confirmed. Please feel free to contact us when needed. 【GCIB Features】 ■ The energy per ion beam atom is low, making it suitable for depth-direction analysis of organic films and others. ■ High mass number fragments that reflect the molecular structure information of the film can be detected. *For more details, please download the PDF or feel free to contact us.

Evaluation of impurity diffusion from the high concentration layer to the lower layer membrane.

Introducing backside SIMS analysis conducted from the substrate side!

In SIMS analysis, when evaluating the diffusion of impurities from a high-concentration layer to a lower layer film, the effects of surface roughness and sputter etching may influence the crater edge effect and knock-on effects from the high-concentration layer. A method of evaluation that is not affected by these influences is Backside SIMS, which conducts SIMS analysis from the substrate side. In the attached PDF document, we introduce the evaluation of the diffusion distribution of F from a SiO2 film (FSG film) to a lower SiO2 film using Backside SIMS, so please take a look. 【Principle of Backside SIMS】 - By polishing the backside of the Si substrate to thin it, we can approach from the backside. - It is possible to control the remaining thickness of the Si substrate to create a thin film, to thin specific areas of patterned samples, or to selectively stop the etching of Si layers such as SiO2. In cases where there are layers that can stop etching, it is also possible to completely remove the Si substrate portion by wet etching. *For more details, please download the PDF or feel free to contact us.

Particle evaluation of DDS formulations using SAXS for polymer micelles.

It is possible to calculate the shape (such as spherical or elliptical) and size distribution of nanoparticles!

We would like to introduce our "Particle Evaluation of Polymer Micelles in DDS Formulations using SAXS." DDS (Drug Delivery System) is a drug transport system that selectively acts on the necessary areas within the body, and it is highly anticipated for its ability to reduce side effects. In DDS, polymer micelles are often used, and our company evaluates the particle shape and size distribution of these polymer micelles using SAXS (Small-Angle X-ray Scattering). 【Features】 ■ SAXS: An analytical method that uses X-ray scattering to analyze the structure of materials ■ Sample types: Applicable to both solids and liquids ■ Non-destructive analysis ■ Capable of calculating the shape (spherical, elliptical, etc.) and size distribution of nanoparticles *For more details, please download the PDF or feel free to contact us.

Defect evaluation using synchrotron radiation topography

Non-destructive defect evaluation of large-diameter wafers from 4 inches to 6 inches with high resolution is possible!

We would like to introduce our "Defect Evaluation using Synchrotron Topography." In compound semiconductors such as SiC and GaN, there are many crystal defects that significantly affect device characteristics. With this evaluation, it is possible to non-destructively assess defects across the entire surface of large-diameter wafers ranging from 4 inches to 6 inches with high resolution. 【Features】 ■ Visualization of various crystal defects with a resolution of a few micrometers ■ Detection of threading edge dislocations (TED) that cannot be detected by laboratory equipment ■ Evaluation of the types and distribution of defects *For more details, please download the PDF or feel free to contact us.

Hydrogen annealing evaluation by temperature-programmed desorption gas analysis (TDS)

You can check the gas components released from the Ta board and the desorption temperature of hydrogen!

As part of the widely used "hydrogen annealing evaluation" in semiconductor manufacturing, we present a case measured using TDS (Thermal Desorption Spectroscopy). By performing mass spectrometry while heating in a vacuum, we were able to confirm the desorbed gas components from the Ta plate and the desorption temperature of hydrogen. Additionally, by mass analyzing the desorbed gases, we can identify the types of gases and understand the desorption behavior of specific components. [Case Overview] - Heating desorption gas profile from the sample - Identification of desorbed gas species and comparison of desorbed gas amounts through mass spectrometry (m/z = 1 to 199) *For more details, please download the PDF or feel free to contact us.

[DTEmpower] Strength Evaluation of Spaceship Wall Structure

The data used in this case consists of 500 sets of low fidelity and 100 sets of high fidelity.

Using the general-purpose data analysis and modeling software DTEmpower, we will conduct a data-driven strength evaluation of the reusable spacecraft wall structure. Reusable spacecraft are a crucial tool for enabling transportation between space and the ground, and the evaluation of the load-bearing capacity of wall structures, as typical load-bearing components, is significantly related to the overall safety performance of the spacecraft. However, traditional finite element methods often require over 100 minutes of computation time for a single buckling analysis of an enhanced cylindrical exterior, leading to high costs. *For more detailed information, please refer to the related links. For further inquiries, feel free to download the PDF or contact us.*

Evaluation of the thermal transport performance of a vapor chamber with a metal particle sintered wick.

Safety assessment for humans

Final confirmation of the safety of products and raw materials. We conduct various safety assessments for humans.

■Recommended for those with the following development challenges: Want to label products such as cosmetics as "Patch Tested" Want to conduct patch tests for sensitive skin Want to proceed while consulting on what safety data should be obtained ■Features - Various safety evaluations for humans can be contracted - Regular testing conducted ■Examples of tests Patch test, sensitive skin patch test, cumulative skin irritation test, RIPT (cumulative irritation and sensitization), phototoxicity and sensitization tests, comedogenicity, stinging *Please check the testing schedule on our website.

Let's change to a lifestyle that is gentle on the environment, the community, and ourselves!

Keywords: Environmental planning, environmental assessment, consensus building, water supply and sewage.

We are engaged in research that aims to improve our everyday lives while continuing to study our immediate environment, infrastructure, and social systems in an interdisciplinary manner. Focusing on reducing environmental impact, we seek to uncover the invisible challenges faced by the environment, infrastructure, and social systems, exploring their causes and searching for solutions. Additionally, we study the design of planning processes for local governments and large-scale projects to aid in consensus building, aiming to contribute to sustainable community development. Currently, we are focusing on water supply and sewage systems, challenging ourselves to identify areas where business efficiency may decline due to population decrease, as well as developing methods for visualizing water flow and estimating future district-specific operational costs. We explore integrated and sustainable measures to address the challenges posed by the decrease in users, the increasing burden of fees, and the need to secure local water environments, which encompass social, economic, and environmental aspects. We will also apply the developed methods to other infrastructures and social systems.

Claude Code Cloud Session Practical Evaluation

Even if you close the PC, the AI continues to work—an honest evaluation applied to business.

Every time I move, closing the PC also stops the work of the AI agent. I evaluated the cloud session of Claude Code, which continues to work in the cloud even when the PC is closed, in relation to actual business operations. I am organizing the suitable and unsuitable uses, noting that it does not reach testing and environment setup on the internal server, and that work confined to Git generally finishes in a short time. For more details, please refer to the technical column in the related links.

Battery evaluation business

BEANSYOU Battery Evaluation ANSWERS YOU. I will answer your battery evaluation.

In recent years, as the performance of batteries evolves rapidly, measurements related to electrical performance, as well as environmental and safety assessments, have become essential. This evaluation will be conducted through the neutral perspective of a third party, assessing the overall performance and providing a report.

ESG finance evaluation for achieving carbon neutrality

The key to successfully raising large amounts of funding. Supporting the collaboration between external evaluations of ESG bonds that meet international standards and third-party verification organizations.

As sustainable finance rapidly expands towards the realization of a decarbonized society, the ESG factors of companies are becoming increasingly important in the investment and financing decisions of private financial institutions and investors. In particular, for the massive fundraising required to achieve carbon neutrality, initiatives that align with the issuance of ESG bonds such as green bonds and lending conditions are essential. To secure funding in such markets, obtaining "external evaluations" that demonstrate compliance with various international standards and guidelines is indispensable. The acquisition of second opinions from evaluation agencies and the deepening of relationships with third-party verification organizations that substantiate the objectivity of greenhouse gas (GHG) reduction achievements, along with appropriate data disclosure, significantly influence the evaluations. A detailed article on the trends in ESG finance evaluation, the latest domestic trends, and reliable disclosure methods trusted by investors is included in the catalog. Please download the materials to check it out.

Evaluation of Adhesion Using DMA Dynamic Viscoelasticity Measurement for Coatings

We evaluate the adhesion of the paint and contribute to the improvement of product quality.

In the paint industry, the evaluation of adhesion, which affects the durability and performance of products, is crucial. Delamination and deterioration of the paint film can shorten the product's lifespan and undermine customer trust. The Iplexar series double drive system can accurately obtain the data necessary for evaluating the adhesion of paints, thanks to its high load performance and high-resolution sensors. This helps in optimizing paint formulations and manufacturing processes. 【Application Scenarios】 - Evaluation of paint adhesion - Paint film delamination testing - Evaluation of paint durability 【Benefits of Implementation】 - Improvement in paint quality - Enhancement of product reliability - Increase in customer satisfaction