Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 22, 2026～May 19, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 1072 items
It comes with adhesive, primer, and syringe tips.
The set includes adhesive, primer, and syringe tips. It is an adhesive that hardens in a few minutes without heating. 【Features】 ○ Kit (adhesive, primer activator, syringe tip) For more details, please contact us.
Environmentally friendly water-based polyethylene! Concrete block adhesive with no discoloration from UV rays.
"Narsilver Neo" is a concrete block adhesive that has been loved for many years as an adhesive for concrete parking blocks and gardening bricks, developed by applying the technology accumulated with Narcoat to the existing "Narsilver." Thanks to the elasticity of polyethylene, impact resistance has been improved. The resin used is a polyethylene resin that is safe and environmentally friendly, rather than petroleum-based products. We also offer "Narsilver Mini," which comes in a pack of 40 tubes of 350g each. 【Features】 ■ Improved adhesion strength, water resistance, and durability ■ Enhanced impact resistance due to the elasticity of polyethylene ■ Reduced drying and curing time ■ Conventional features such as single-component, water-based, and safety remain unchanged *For more details, please refer to the PDF document or feel free to contact us.
Ideal for bonding substrates such as insulation materials, concrete, and metals! It can also bond to damp substrates.
"Narufaruto A" is a one-component adhesive in a water-dispersible emulsion system, primarily composed of asphalt. It strongly adheres to various substrates, mortar, and concrete, and is non-toxic and non-flammable due to its solvent-free nature. Simultaneously, it forms a waterproof layer, demonstrating waterproofing effects. It can be applied even when the substrate is damp. 【Features】 ■ Provides strong adhesion while exhibiting waterproof properties ■ Adheres even when the substrate is damp ■ Easy application with a brush, trowel, or roller ■ Does not require skilled labor ■ Non-toxic, with no risk of flammability, and easy to handle *For more details, please refer to the PDF document or feel free to contact us.
Even if the substrate is wet, construction is possible! A brick block adhesive that does not use any organic solvents.
"Naruburikku" is a one-component adhesive for brick blocks that is easy to work with. The material is an environmentally friendly water-based polyethylene resin, allowing for application even on damp surfaces. It is highly weather-resistant, so any excess will not discolor. The nozzle at the tip allows for optimal application, and it comes in a laminated tube, so it can be stored without using it all at once. 【Features】 ■ Environmentally friendly water-based polyethylene ■ Suitable for bonding brick blocks and brick tiles ■ One-component for easy application ■ Highly weather-resistant, with no discoloration of excess ■ Contains no organic solvents, and is non-toxic and non-flammable *For more details, please refer to the PDF document or feel free to contact us.
Relaxation of stresses due to substrate deformation and thermal expansion! Long-term adhesive stability can be expected.
"Tile Grip" is a one-component cartridge-type modified silicone and epoxy resin-based elastic adhesive. It is suitable not only for bonding and repairing tiles and stone materials but also for bonding and repairing various components of exterior and interior walls of houses. It has obtained certification for compliance with the Japan Adhesive Industry Association F☆☆☆☆ and 4 VOC standards. 【Features】 ■ One-component modified silicone and epoxy resin-based ■ Cartridge type ■ Easy to use ■ No hassle ■ High long-term reliability *For more details, please refer to the PDF materials or feel free to contact us.
A special modified silicone-based elastic adhesive that achieves high hardness, high strength, and high elongation!
"Dansei Bond Mega Hard One" is an elastic adhesive that incorporates a unique formulation to provide elasticity in strength and hardness. With a tack-free time of approximately 20 minutes (at 23°C), it contributes to shortening construction periods. It uses a special modified silicone-based formulation, offering excellent weather resistance. It is suitable for repairing cracks in floor joints, ground joints, and concrete floors in factories and similar environments. 【Features】 ■ Ideal for repairing cracks in floor joints, ground joints, and concrete floors in factories ■ Fast-curing type that hardens firmly ■ Achieves high hardness, high strength, and high elongation *For more details, please refer to the external link page or feel free to contact us.
A suction cup adhesive auxiliary paste using a peelable chemical reaction type adhesive! Suitable for use in wet areas as well.
"Pitah! to Peel" is a removable chemical reaction-type adhesive. Once the paste hardens, it can be peeled off, allowing for clean removal when no longer needed. By applying it inside a suction cup and attaching the cup, there is no worry about it falling off. Additionally, it can be used on uneven surfaces and curved areas where suction cups have not previously adhered, and it can be used in water-prone areas and outdoors where deterioration occurs quickly. [Features] - Can be removed once the paste hardens after application - Provides adhesive reinforcement for suction cups that have lost their suction power - Being in paste form allows for flexible application in shape and quantity - Usable on uneven surfaces and curved areas - Becomes water-resistant after curing, making it suitable for wet areas *For more details, please refer to the PDF document or feel free to contact us.
Introduction of a one-component moisture-curing special modified silicone adhesive that can be used for bonding dissimilar materials.
The "Sharpie Dansei Bond PP Seal" is a one-component, moisture-curing special modified silicone adhesive that can be used for bonding dissimilar materials made of polypropylene (PP), such as electrical appliances and automotive parts. It has excellent adhesion to various substrates. The main component is modified silicone resin in a paste form. 【Features】 ■ Strong adhesion to difficult-to-bond PP ■ Excellent adhesion to various substrates ■ Capable of bonding dissimilar materials such as plastics, metals, glass, and rubber *For more details, please refer to the PDF document or feel free to contact us.
Hot melt for binding
This is a binding spine adhesive with excellent adhesion. ■□ Unbeatable low price! ■□ Available in cut type and sheet type. ■□ Can be easily cut with scissors, a cutter, or a cutting machine.
Excellent adhesion! We offer an easy-to-use cut type and a cost-effective sheet type.
"J Melt" is a hot melt adhesive for bookbinding that melts with heat. It has excellent adhesive strength and is convenient for self-binding. You can easily bind books using a thermal binding machine, iron, hot plate, etc. We offer a "cut type" that is pre-cut and a "sheet type" that can be easily cut with scissors, a cutter, or a cutting machine. 【Features】 ■ Melts and adheres with heat ■ Easily bind books using a thermal binding machine, iron, hot plate, etc. ■ Available in a convenient cut type and a cost-effective sheet type *For more details, please refer to the related links or feel free to contact us.
Introducing a variety of adhesives designed to meet diverse needs!
At Izawa Corporation, we offer a selection of 3M adhesives tailored to meet your needs. We provide a variety of products, including "industrial adhesives" that contribute to the development of various industries such as aerospace, construction, automotive, electronics, printing, design, and packaging, which require harsh usage conditions, as well as "electronic adhesives" that have high electrical insulation properties and are optimal for electronic component applications. 【Product Lineup】 ■ Industrial - 3M Scotch-Weld EPX Adhesive System - 3M Scotch-Weld One-Part Epoxy Adhesive - 3M Scotch-Weld Moisture-Curing Hot Melt ■ Electronic - 3M Scotch-Weld One-Part Epoxy Heat-Curing Adhesive - 3M Scotch-Weld Two-Part Epoxy Room Temperature-Curing Adhesive - 3M One-Part Urethane Moisture-Curing Adhesive *For more details, please refer to the PDF document or feel free to contact us.
High heat resistance is a feature! Recommended for automotive parts and industrial robots.
3M Scotch-Weld "High Heat Type" is a one-component epoxy heat-curing adhesive characterized by its high heat resistance, with a glass transition temperature of over 180 degrees. It has very high adhesive strength even at high temperatures, and its adhesive strength remains unchanged even after high-temperature and high-humidity durability tests, making it suitable for applications that require high heat resistance and reliability, such as automotive components and industrial robots. 【Product Lineup】 ■EW2034 ■EW2045 ■EW2046 *For more details, please refer to the PDF document or feel free to contact us.
Excellent storage stability and electrical insulation! For various parts joining applications in electronic components.
3M Scotch-Weld "High Heat Resistance Type" is a one-component epoxy heat-curing adhesive that boasts excellent storage stability, with minimal changes in viscosity and performance even after being left at room temperature for several days. Since dry ice, which is classified as a hazardous material during air transport, is not required, it can be shipped as a non-hazardous material, thereby reducing transportation costs associated with its weight. It also has excellent electrical insulation properties, making it suitable for various bonding applications of electronic components. [Features] - High storage stability - Electrical insulation *For more details, please refer to the PDF document or feel free to contact us.
Coating is also possible with extremely narrow widths! Suitable for bonding cases of mobile devices that are becoming smaller and lighter.
3M's "One-Part Urethane Moisture-Curing Adhesive" is an adhesive that possesses the properties of both hot melt and moisture-curing adhesives. It achieves initial adhesion by being heated and applied in a molten state, followed by complete curing through moisture curing. Additionally, it can be applied in ultra-fine widths of 0.5mm or less, making it suitable for bonding cases of mobile devices that are becoming smaller and lighter. 【Product Lineup】 ■PBA2665 ■PBA2665B *For more details, please refer to the PDF document or feel free to contact us.
It can be used as a bonding method for structures, replacing welding and riveting.
The "3M Scotch-Weld 1-Part Epoxy Adhesive" comes with the main agent and hardener pre-mixed, so there is no need for measuring or mixing. It cures through heating, demonstrating high adhesive strength and durability. It can be used for bonding structures as an alternative to welding or riveting. 【Product Lineup】 ■SW2214 ■IW2190 ■IW2460 ■IW2510 *For more details, please refer to the PDF document or feel free to contact us.
Refillable for cost reduction! The sausage pack has high airtightness, ensuring long-lasting quality stability.
The "3M Polyurethane Adhesive and Sealant" is a refillable non-structural adhesive that helps reduce costs. It is easy to handle as you simply insert the sausage pack into a dedicated gun and push it out. Cartridges can sometimes cause the adhesive to harden due to moisture intrusion, but the sausage pack has high airtightness, ensuring long-lasting quality. As the material is dispensed, the bag is compressed, so there is no bulky waste. We also offer the "3M Hybrid Adhesive and Sealant." 【Lineup】 ■540 ■740 ■560 ■760 ■590 *For more details, please refer to the PDF document or feel free to contact us.
No toxic gas is generated, and it is also non-flammable! It is used in various fields.
The product is a high-heat-resistant, high-performance water-based adhesive. Since it uses water as a solvent, it does not produce toxic gases and is also non-flammable. 3M's water-based adhesives are used in various fields such as automotive, electronics, construction, and general industry. Additionally, we offer "industrial adhesives" that have excellent bonding properties, durability, and sprayability. 【Product Lineup】 ■3M Water-Based Adhesive AC1200 ■3M Water-Based Adhesive SP-7533 ■3M Water-Based Adhesive JA-7562 ■3M Water-Based Adhesive FT1000NF ■3M Water-Based Adhesive for Polyolefins PP1000 *For more details, please refer to the PDF document or feel free to contact us.
A wide range of products suitable for temporary metal bonding and adhesion of PE, PP, and more!
This product is an adhesive for application at 200°C. We offer a wide range of options suitable for bonding soft woods such as particle board and plywood, as well as cardboard, starting with "3738," which is ideal for temporary fixation of other materials. Additionally, we have "7399" and "3748V0," which are well-suited for bonding polyethylene and polypropylene, allowing you to choose according to your application. 【Product Lineup (Excerpt)】 ■3738 ■3747 ■3748 ■3762 ■3764, etc. *For more details, please refer to the PDF document or feel free to contact us.
A lineup of fine mist sprays that can be easily applied and removed, as well as products suitable for a wide range of materials!
We offer a wide range of "3M Aerosol Adhesives," including "Spray Adhesive 55," which allows for soft adhesion that can be applied, removed, and reapplied; "Spray Adhesive 77," which adheres firmly without wrinkling even on thin materials; and "Spray Adhesive 88," which has a very soft adhesive layer even after drying. Please choose according to your needs. 【Product Lineup】 ■ Spray Adhesive 55 ■ Spray Adhesive 77 ■ Spray Adhesive 88 ■ Spray Adhesive 99 ■ Spray Adhesive 111 *For more details, please refer to the PDF document or feel free to contact us.
A heating-curable epoxy adhesive that is a one-component product and has excellent storage stability. It cures quickly in a short time of 1 to 2 minutes at temperatures between 90 and 150°C.
The "Seal-glo NE series adhesive for fixing chip components" is an adhesive developed for temporarily fixing chip components. It is a one-component, heat-curing epoxy adhesive that boasts excellent storage stability. Not only does it have rapid curing properties, curing in just 1 to 2 minutes at temperatures between 90 and 150°C, which is required for SMD mounting, but it also comes in various grades that excel in high-speed dispensing and fine printing to meet your needs. Halogen-free options are also available. For more details, please download the catalog or contact us.
New hot melt coating device
The new Nino series is designed based on a model that combines the advantages of the BS series and BSU series, featuring a hot melt remaining amount display, a timer that can switch between weekly and daily settings, and an operation delay function, among other convenient features for production lines. Additionally, we have focused on usability in the design and manufacturing process.
A hot melt glue gun that works with any material.
Ample tank capacity. Just open the lid and add the materials to complete the refill.
We will achieve the optimization and acceleration of subsequent operations.
The hot melt glue sticks from Jowat are used for various applications.
Eco-friendly 1-second adhesive for people and the environment.
Would you like to achieve even greater efficiency with hot melt adhesive?
A glue gun that can handle various lines without being limited by materials!
The "MS Series" can dissolve hot melt in pellet and block shapes and apply it with a nozzle suitable for the task. The tank has a large capacity, and materials can be added simply by opening the lid at the top for melting. The amount can be adjusted by the trigger pull, making it compatible with various lines. Temperature adjustment is done at the back of the gun, allowing for temperature settings between 70 and 190°C, suitable for the materials and tasks. [Features] - Large tank capacity - Easy quantity adjustment - Compatible with various lines - Temperature adjustment available *For more details, please refer to the catalog or feel free to contact us.
Outgassing levels are extremely low! The perfect adhesive for improving reliability.
Thermoplastic resins have the property of softening when heated to a specified temperature and then hardening when the temperature decreases. STAYSTIK adhesive is an adhesive that utilizes this characteristic of thermoplastic resins. Since no curing accelerators are added like in thermosetting adhesives, it is physically stable and allows for long-term storage at room temperature. Additionally, it softens upon heating, making rework after adhesion easy. 【Features】 - Extremely low outgassing levels - Reworkable (can be peeled off with solvents or heat) - Can be stored at room temperature for one year - Available in two types: paste type and film type - Three types: conductive, thermal conductive (electrically insulating), and insulating - The paste has minimal "bleeding" during curing (heating) - The film type and paste can be bonded with short-term (seconds to minutes) heat pressing after B-stage - High reliability conforming to military standard MIL-STD-883, 5011/2 - Stress relief achieved with low elastic modulus - Compliant with RoHS directive - PFAS-free
【Hot Melt Molding Machine】 ▼From low-cost tabletop devices to mass production machines▼ ▼Many actual machines on display at the prototype lab (Fuji City)▼
Hot melt molding, which is expanding its adoption for waterproof applications in electrical components. The MK series from Matsumoto Processing is a molding machine developed specifically for hot melt molding. It is compact and user-friendly, and has been introduced in many customers' factories. Additionally, we can accommodate customization and dedicated design of equipment according to customer requirements. Furthermore, we also support automation, including fully automatic inline machines. ◆ We have various devices on display at our prototype lab in Fuji City, Shizuoka Prefecture. Customers wishing to visit should contact us.
"Complete sealing of electrical components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation!" Hot melt molding is gaining attention for the waterproof sealing of electrical components.
▼VA: Switching of two-component potting agents ▼ ▼Waterproofing of substrates ▼ ▼Water sealing of terminals and connectors ▼ ▼Vibration damping of module components ▼ The hot melt adhesives we handle have a wide environmental temperature range of -40 to 140°C and are particularly well-established for sealing applications in automotive components. Additionally, they are sustainable products made primarily from natural fatty acids derived from grains. We will propose the most suitable hot melt adhesive based on your usage conditions. ◆ Our company consistently responds with in-house technology for selecting the optimal materials for your product specifications, designing molded products, conducting CAE analysis, and prototyping. Please feel free to contact us.
"Complete sealing of electronic components in just a few dozen seconds. Ideal for waterproofing, dustproofing, and insulation!" Hot melt molding is gaining attention for the waterproof sealing of electronic components.
We introduce the adoption of hot melt molding technology that demonstrates excellent sealing performance by directly injecting sustainable hot melt adhesives made from natural fatty acids into electronic components. □ Adoption Examples Waterproofing and dustproofing of circuit boards, waterproof connectors, sensor harnesses, harnesses, switches, etc. □ Benefits of Adoption 1. Reduction in the number of components 2. Reduction in the amount of resin used 3. Shortening of processing time ◆ If you would like a collection of case studies, please download the catalog. ◆ If you would like a sample of the actual product, please contact us.
"Complete sealing of electronic components in just a few dozen seconds. Waterproof, dustproof, and insulated." A sealing method for electronic components that replaces potting = hot melt molding.
By replacing potting, we achieve cost reduction and miniaturization. Hot melt molding has the following advantages, and the transition from two-component potting is progressing. - Extremely short cycle time In hot melt molding, sealing is completed in just a few seconds. - Possibility of miniaturization and lightweight design Since it allows for direct insert molding of electronic components, there is no need for a case, and the high degree of freedom in shape enables miniaturization and lightweight design. - Sustainability The PA-based hot melts we handle are primarily made from natural vegetable oils, offering excellent environmental benefits. We have compiled materials on how potting and hot melt molding differ. Please download the materials. *For the "cost reduction" materials, please view the PDF data from the download.
