We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for material.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

material(ca) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Dec 03, 2025～Dec 30, 2025
This ranking is based on the number of page views on our site.

material Product List

1～15 item / All 157 items

Displayed results
"Meiji Coral Calcium" Ca fortified material, rich in minerals

"Meiji Coral Calcium" Ca fortified material, rich in minerals

It's easy to use because it's a fine powder! A gift from the mineral-rich sea.

"Meiji Coral Calcium" is a natural, unburned calcium obtained from the weathered material of reef corals selected and finely powdered from clean marine areas. In addition to calcium, it is also rich in minerals such as magnesium, iron, potassium, and phosphorus. [Features] ■ Easy to use due to its fine powder ■ Porous, tasteless, and odorless white powder ■ When applied to beverages and desserts that value texture, it has minimal grittiness *For more details, please refer to the PDF document or feel free to contact us.

  • Nutritional supplements
  • Food/beverage functional materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Edible Whey Calcium Powder" Ca-enriched material

"Edible Whey Calcium Powder" Ca-enriched material

Safe because it's made from milk! Rich in minerals and well-balanced.

"Whey Calcium" is a natural calcium rich in minerals that values the image of nature and health associated with milk. Since it is made from milk, it pairs particularly well with dairy products and maintains the image of food. Additionally, it contains a variety of minerals derived from whey, such as phosphorus and magnesium, in abundance alongside calcium. [Features] - Contains over 26% milk-derived minerals, especially calcium - Safe because it is made from milk *For more details, please refer to the PDF document or feel free to contact us.

  • Nutritional supplements
  • Food/beverage functional materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tool material Insert chip material

Tool material Insert chip material

K types, Z types, and of course P types, are optimal insert chip materials for cermets as well.

Our unique P-type cermet, developed for insert chip materials, boasts excellent cutting performance and durability, demonstrating remarkable results even in intermittent cutting. Since we manufacture molds in-house, we can accommodate shapes that closely match our customers' requests. We are also able to handle small lot sizes! We have established a system to achieve short lead times for diverse and small-lot production. 【Features】 ○ In-house mold manufacturing ○ Accommodating shapes close to customer requests ○ Capable of handling small lot sizes ○ Achieving short lead times for diverse and small-lot production For more details, please contact us or download the catalog.

  • Other metal materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Functional material "Fossil Coral Powder"

Functional material "Fossil Coral Powder"

Used by top active athletes!

"Fossil Coral Powder" is a material that contains over 70 types of "marine-derived minerals," including 16 types of "essential minerals" that are indispensable for the skin, such as cobalt and molybdenum, with high purity. It contains no impurities and is made up of almost 100% coral-related components, making it safe without concerns about marine pollution. Additionally, it uses unburned calcium, which is one of its features that prevents the alteration or degradation of mineral components such as calcium and magnesium. [Features] ■ Safe ■ High purity ■ Contains no impurities ■ Prevents alteration and degradation of mineral components ■ Made up of almost 100% coral-related components *For more details, please refer to the catalog or feel free to contact us.

  • Food ingredients (powder)
  • Beverage ingredients (powder)
  • Food/beverage functional materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mitax Corporation Business Introduction

Mitax Corporation Business Introduction

Business introduction of Mitax Co., Ltd., which specializes in non-ferrous metal mold materials and copper alloy casting.

At Mitax Co., Ltd., we cast mold materials made of copper alloy used for producing glass bottles for nutritional drinks, beer, sake, and seasonings. Our mold materials are well-received for deep drawing, bending, and roll forming applications, and we provide mold materials suitable for deep drawing of stainless steel and titanium. 【Mitax Original Mold Materials】 ■ WX-II Mold Material for Glass Bottles ■ MS40 Mold Material for Deep Drawing, Bending, and Roll Forming of Stainless Steel and Titanium ■ MS46 Mold Material for Shell Molds *For more details, please download the PDF or feel free to contact us.

  • Other molds
  • Non-ferrous metals
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Material Sales] Raw Metal

[Material Sales] Raw Metal

Jumbo blocks and billet shapes are also available! All JIS standards can be manufactured!

We support the procurement of high-quality and diverse materials while responding to our customers' requests by expanding our manufacturing network for each material. We can manufacture all material standards (JIS standards) for 'raw materials' and also accommodate jumbo blocks and billet shapes. Please feel free to consult us regarding RoHS compliance, lead regulations, and special alloys. 【Features】 ■ All material standards (JIS standards) can be manufactured ■ Main products: standard square bars, ship bottom shapes, jumbo blocks (3t), half square bars, brass billets, standard packaged ingots * You can also view our e-commerce site from the link below. * For more details, please refer to the PDF materials or feel free to contact us.

  • Casting Machine
  • Contract manufacturing

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cyclochem Co., Ltd. Product Catalog

Cyclochem Co., Ltd. Product Catalog

Featuring cyclodextrin products widely used in various fields!

This catalog is the product catalog of Cyclochem Co., Ltd., which mainly engages in product development and sales using cyclic oligosaccharides. It features natural cyclodextrins from the "CAVAMAX Series," as well as chemically modified cyclodextrins from the "CAVASOL Series" and "cyclodextrin inclusion complexes." You can choose products according to your application. [Contents] ■ Introduction ■ What is Cyclodextrin ■ Product Range ■ Safety *For more details, please refer to the catalog or feel free to contact us.

  • Pharmaceutical materials and carriers
  • Food/beverage functional materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Copper alloy, casting, bronze, gunmetal, non-ferrous, material.

Copper alloy, casting, bronze, gunmetal, non-ferrous, material.

Leave the casting of copper alloy (bronze) materials to us.

Casting of copper alloys and sale of metal materials. We respond quickly to customer requests with short delivery times.

  • Metal bearings
  • Non-ferrous metals
  • stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cast nylon material "TECAST"

Cast nylon material "TECAST"

A rich lineup of sizes and support for large sizes! Material optimized for machinability.

We would like to introduce our cast nylon material, 'TECAST'. We manufacture sheets, round bars, and tubes made from PA6C resin for machining applications. Cast nylon has higher crystallinity, molecular weight, mechanical strength, and toughness compared to nylon 6 used in injection molding and extrusion. By using additives such as oils, solid lubricants, and thermal stabilizers, it can be adjusted for specific applications, making it suitable for a wide range of uses. 【Features】 ■ A wide range of sizes and support for large sizes ■ Cut-to-order service available from one piece ■ Adopted in many applications ■ Complies with food standards ■ Stable quality at low cost ■ Material optimized for machinability *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PBT material/PET material 'TECADUR/TECAPET'

PBT material/PET material 'TECADUR/TECAPET'

High strength and rigidity! It has sufficient chemical resistance to organic solvents, lubricating oils, gasoline, and more.

"TECADUR" is a PBT material that excels in high strength and rigidity, thermal deformation resistance, dimensional stability, and creep resistance. Like other polyester resins, it has low friction and wear resistance, as well as excellent chemical resistance to chlorine-based detergents and caustic soda. Additionally, we also handle "TECAPET," which, due to its high creep resistance, low moisture absorption, and excellent dimensional stability, is used in applications that require high demands for complex parts and dimensional accuracy. 【TECADUR Features】 ■ High strength and rigidity ■ Excellent dimensional stability ■ Creep resistance ■ Very high wear and abrasion resistance ■ Excellent impact strength *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nylon material "TECAMID"

Nylon material "TECAMID"

Available in a wide range of fields! It has a low coefficient of friction and self-lubricating properties, making it excellent in terms of sliding performance.

We would like to introduce the nylon material 'TECAMID' that we handle. We manufacture sheets, rods, and tubes of extruded PA resin as materials for machining. Nylon is extremely resistant to wear, has a low coefficient of friction, and shows high resistance to temperature, chemicals, and impact, making it widely used in various fields, including electronics, marine, automotive, and even fibers for carpets. Additionally, nylon resin has different mechanical properties and water absorption characteristics due to variations in molecular structure, so it is necessary to select the appropriate type according to the intended use. 【Features】 ■ Excellent mechanical strength ■ Outstanding wear characteristics ■ High impact strength ■ Excellent damping properties ■ Low coefficient of friction and self-lubricating *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PEEK material "TECAPEEK"

PEEK material "TECAPEEK"

We offer over 50 types of standard grades, as well as special grades such as fiber-reinforced and conductive!

"TECAPEEK" is a high-quality PEEK material with extremely low internal distortion and minimal warping, offering excellent dimensional stability. We provide extruded PEEK sheets, PEEK rods, and PEEK tubes in over 500 different sizes for machining. Additionally, we offer special sizes tailored for high-tech industries such as semiconductors, oil and gas, energy, and aerospace, and we can accommodate custom sizes as well. 【Features】 ■ Made with Victrex PEEK 450 ■ Available for cut-to-size sales starting from one piece ■ Immediate shipping available from a rich inventory of sizes in Japan ■ Special sizes for high-tech industries are available ■ Custom sizes can also be accommodated *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Natural cyclodextrin "CAVAMAX Series"

Natural cyclodextrin "CAVAMAX Series"

We can offer high-quality cyclodextrin at a low price!

The "CAVAMAX Series" consists of products that uniquely separate α, β, and γ-cyclodextrins using proprietary technology. Traditionally, cyclodextrins were produced as a mixture and then separated and purified afterward, which was very costly. However, the establishment of our unique technology that completely separates these has made it possible to supply high-quality α, β, and γ-cyclodextrins at a low cost. [Features] ■ High Quality ■ Low Cost *For more details, please refer to the catalog or feel free to contact us.

  • Food/beverage functional materials
  • Pharmaceutical materials and carriers
  • Fine chemicals (compounds, derivatives, catalysts, etc.)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
POM material "TECAFORM"

POM material "TECAFORM"

Excellent resistance to organic solvents, oils, and grease! A crystalline thermoplastic resin with excellent sliding properties and wear resistance.

We would like to introduce our POM material, "TECAFORM." We manufacture POM resin sheets, rods, and tubes for machining applications. POM is a crystalline thermoplastic resin that excels in mechanical strength, rigidity, sliding properties, and wear resistance. Due to its low water absorption, it has high dimensional stability and excellent machinability and strength, making it suitable for a wide range of applications. There are differences in properties between homopolymer (POM-H) and copolymer (POM-C). POM-H has slightly higher density, hardness, and strength due to its higher crystallinity, while POM-C is characterized by higher chemical resistance and long-term thermal stability compared to POM-H. 【Features】 ■ High strength, rigidity, and toughness ■ Excellent impact strength even in low-temperature environments ■ Low moisture absorption (water absorption rate of 0.8%) ■ Outstanding wear resistance and sliding properties ■ High crystallinity of 75-85%, providing good machinability *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PI material/PAI material "TECASINT/TECAPAI"

PI material/PAI material "TECASINT/TECAPAI"

Excellent electrical insulation! Demonstrates high mechanical strength over a wide temperature range from -270°C to +300°C!

The cutting materials and direct forming products made from "TECASINT" have good long-term heat resistance and can be used over a wide temperature range from -270°C to +300°C. Even when heated instantaneously to 350°C, they do not soften or melt, and can maintain high levels of mechanical strength, dimensional accuracy, and creep resistance even under long-term use or in high-load environments. Additionally, we also handle "TECAPAI," which uses Solvay's polyamide-imide (PAI) Torlon, offering sliding properties and heat resistance above 250°C. 【TECASINT Features】 ■ Long-term heat resistance at 300°C ■ Load deflection temperature of 470°C ■ Excellent electrical insulation ■ Superior compressive strength and creep resistance ■ High purity with minimal volatile gases under vacuum *For more details, please refer to the PDF document or feel free to contact us.

  • Engineering Plastics
  • plastic

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to material

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.