We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(1mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

136～150 item / All 225 items

Displayed results
Edge processing dedicated nozzle for compressors EX series

Edge processing dedicated nozzle for compressors EX series

A nozzle developed for the purpose of processing the edge portions at both ends in water drainage and drying lines for materials such as boards.

In the water drainage and drying line for flat materials (such as steel plates, resin rolls, glass, paper, etc.), slit-type air knives and air nozzles are mainly used. However, in this case, the air that hits the workpiece tends to flow along the surface, reducing its width towards the center, which resulted in insufficient treatment at both ends and edges. By placing the EX & EN series at both ends and using them in conjunction with the slit-type nozzles, it has become possible to solve this issue. 【Features】 ○ Effective injection length: 30mm ○ Nozzle specification: 0.3mm ○ Inlet: PS1/4” (internal thread) ○ Can be connected to a heater for generating hot air, allowing use with high-temperature hot air.

  • nozzle
  • Pneumatic Equipment
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-pressure blower dedicated edge processing nozzle EN series

High-pressure blower dedicated edge processing nozzle EN series

A nozzle developed for the purpose of processing the edge parts at both ends in water drainage and drying lines for materials such as boards.

Water cutting of flat materials (steel plates, resin rolls, glass, paper, etc.) is primarily done using slit-type air knives and air nozzles in the drying line. In this case, the air that hits the workpiece flows along the plane, reducing its width towards the center, which resulted in insufficient treatment of both ends and edges. However, by placing the EX & EN series at both ends and using them in conjunction with the slit-type nozzles, it became possible to solve this issue. 【Features】 ○ Effective spray length: 40mm ○ Nozzle specification: 1mm ○ Inlet: Φ50 ○ Can be connected to a heater for generating hot air, allowing the use of high-temperature hot air.

  • nozzle
  • Pneumatic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air nozzle, air jet nozzle, KSV type, KBV type, KAV type

Air nozzle, air jet nozzle, KSV type, KBV type, KAV type

With a high straight-line performance and high flow rate air nozzle, it demonstrates powerful capabilities for spot blowing.

The orifice has a circular cross-section, and after the gas is contracted in the throat section, it passes through an outlet designed in a flared shape, jetting at a speed greater than the speed of sound at an angle of approximately 16°, achieving effective spot spraying. 【Features】 - High jet velocity can be achieved. - Excellent straightness.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Floating Separation Experiment of Plastic Chips

[Case Study] Floating Separation Experiment of Plastic Chips

In 10 minutes, nearly 100% of the cutting powder will rise! The specific gravity of plastic is greater than that of water and is negatively charged.

We would like to introduce a case study using the "7L/min OK nozzle" for the floating separation experiment of plastic shavings. 【Experimental Results】 ■ Nearly 100% of the shavings floated after 10 minutes ■ Almost 100% separation was achieved with fine bubbles It was also found that when the generation of fine bubbles was stopped, more than half sank ■ The items that sank were close to 1mm in size ■ The mechanism of floating is thought to be that positively charged particles gather around the negatively charged fine bubbles, and negatively charged shavings gather around them, resulting in flotation. *For more details on the case study, please refer to the related links. For further inquiries, feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Thoroughly remove particles with air only, no water - 'Air Screw Nozzle'

Thoroughly remove particles with air only, no water - 'Air Screw Nozzle'

No more revolution! No need for washing; particles are removed with just air blowing.

<Compatible with Class 100! Can be used for cleaning semiconductors> This air nozzle, utilizing a patented unique technology, has an air ejection power that is on a completely different level compared to conventional air nozzles. It removes particles adhered to semiconductors through powerful air blowing. (Compatible with Class 100) In other words, the cleaning process that used to involve three steps: "1. Water washing ⇒ 2. Water draining ⇒ 3. Drying" has been completely transformed. It can now be completed in one step using only "air blowing" without any water. This significantly shortens the process. ■ Benefit 1: Increased productivity and production volume The entire sequence of water washing, water draining, and drying is replaced by cleaning with only air blowing. This means that water washing, water draining, and drying are no longer necessary, leading to a remarkable improvement in productivity and production volume. ■ Benefit 2: Improved operational efficiency and cost reduction As mentioned above, the elimination of the entire sequence allows for significant cost cuts on personnel, various equipment, and the running costs and electricity expenses associated with those equipment. ■ Benefit 3: Improved yield With cleaning power that cannot be compared to other air nozzles, it contributes to improved yield. This helps enhance production efficiency.

  • エアーブローTOP_2.png
  • エアーブローベネフィット.png
  • 導入可能業界（半導体対応ver）.png
  • エアーブロー事例?.png
  • テスト.gif
  • エアーブロー事例?.png
  • エアーブロー前後比較.gif
  • 導入事例.png
  • hojokin.png
  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Auto Stop Gun Nozzle ATNH-20/ATNH-25/FA

Auto Stop Gun Nozzle ATNH-20/ATNH-25/FA

It's convenient to attach it to the end of a hose when combined with an electric pump or air pump! The gun nozzle automatically stops when it's full.

"Auto Stop Gun Nozzle Series" ATNH-20 (25) (for light oil and kerosene) ATNH-FA (for light oil and kerosene / exclusive for FA-100) *Cannot be used with oil, gasoline, or biodiesel. ◎ Stops without using electricity or batteries This nozzle automatically stops when full, using a liquid level sensor without electricity or batteries. The auto stop functions at a constant flow rate and pressure, so it cannot be used with gravity drop. *Please pay attention to the usage pressure and flow rate range. 《Benefits》 ● Easy operation at your fingertips ● Automatically stops when full 《Features》 ● Dispenses when gripped, stops when released ● Includes lever hook ● Not usable with natural drop or siphon methods

  • atnh-25.jpg
  • Other pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
If you are having trouble with the adhesion of components with complex shapes, please consult us.

If you are having trouble with the adhesion of components with complex shapes, please consult us.

[Ultra-Fine Processed Parts] Assembly and SMT Special Solder Jet Nozzles (LEDs, Connectors, Switches) *We provide integrated production from design to manufacturing.

The shapes and materials of mounting components such as LEDs, connectors, shields, and switches have become increasingly diverse. For those struggling with complex shapes that are difficult to adhere to, we offer stable production through the design of nozzles for mounting machines, utilizing our expertise. We can also manufacture various machine cutters, consumables, and jigs (such as circuit board cutting cutters). *We have recently started producing solder jet nozzles. We possess processing technology for wire diameters of φ0.05mm using horizontal wire processing machines, enabling ultra-fine processing. We accommodate various machine manufacturers. 【Features】 ■ Scratch prevention measures ■ Take-back measures ■ Support for parts that are difficult to adhere to from the top ■ Design of suction pitch according to the size of the parts ■ Compatible with various pad sizes *For more details, please refer to the PDF materials or feel free to contact us.

  • IPROS04581279750309836841.jpeg
  • 基板分割カッター2.jpg
  • IPROS43335724594536772926.jpeg
  • page2.jpg
  • connector nozzle（3）.jpg
  • 部品用トレー.jpg
  • page4-1.jpg
  • ラジアル.jpg
  • アキシャル.jpg
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

Integrated standard fan-shaped nozzle "Yamagata distribution nozzle VVP"

All-metal or all-plastic! A simple integrated nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Yamagata flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends will result in an even flow distribution across the entire width. It is a simple integrated nozzle made of either all metal or all resin, which is directly screwed into the pipe body. A strainer (available only for metal body products) is standard equipment for small flow products and can be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ All metal or all resin construction ○ Even flow distribution across the entire width ○ Strainer standard equipment for small flow products For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.

The "Uniform Distribution Nozzle VEP" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip section. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan-shaped spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle using ceramic in the tip section ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin Spray Nozzle "King Nozzle" TYPE-CDH Series

Resin Spray Nozzle "King Nozzle" TYPE-CDH Series

High flow hollow cone type spray nozzle

The 【TYPE-NF】 is a PP (polypropylene) spray nozzle of the hollow cone spray type. It was developed as an enlarged version of TYPE-NF. Compared to other hollow cone types, the particles are larger, and the flow rate is higher, making it ideal for large-volume cooling, humidifying, and defoaming. It is also suitable for air cleaning and washing in large-volume air washers and scrubbers, as well as for irrigation in large-scale agriculture and livestock, and for defoaming in wastewater treatment plants. Being made of resin, it is resistant to acids and alkalis, making it suitable for surface cleaning before painting or plating.

  • nozzle
  • spray
  • Plating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manual Gun Nozzle GN-PPW20

Manual Gun Nozzle GN-PPW20

It is convenient to attach it to the end of a hose when combined with an electric pump or air pump for water use.

"Benefits" ● Easy operation at your fingertips ● Usable even with self-weight drop * Please be careful with the operating pressure. "Features" ● Dispenses when gripped, stops when released ● Includes lever hook

  • Other pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Retractable CIP nozzle (PC)

Retractable CIP nozzle (PC)

Sanitary specification retractable CIP nozzle

This is a storage-type CIP nozzle. - Areas that cannot be cleaned with a spray ball - Areas where surface irregularities need to be eliminated during production - Lines that want to be automated It is ideal for cleaning such areas.

  • Beverage Production Equipment
  • Food Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manufacturing of plasma nozzles (laser nozzles and plasma chips)

Manufacturing of plasma nozzles (laser nozzles and plasma chips)

All made by cutting processing on a lathe! Introducing the nozzle that can be attached to the tip.

The "plasma nozzle" is a nozzle that is attached to the tip of a plasma cutting machine, which injects the arc. In the case of this product, a circular groove was processed inside a shape resembling an umbrella, and a fine hole was drilled in the center. Additionally, all manufacturing was done through cutting on a lathe. Please feel free to contact us when you need our services. 【Features】 ■ Wide range of processing from 2mm to lengths of 3m, and up to 400φ for round objects ■ From small lots of 1 piece to mass production ■ Cutting, deep hole processing, bending, and joining ■ Compatible with various workpieces using the five-axis composite machining center "DMU 65 monoBLOCK" ■ Cutting possible with water jet regardless of material *For more details, please download the PDF or feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High thrust air nozzle

High thrust air nozzle

Achieving low noise and high-capacity air blowing.

It provides powerful air blow for applications that require high thrust and high speed. While it uses more compressed air compared to other air nozzles, it consumes less compressed air at the same thrust as conventional blow-off products, making it energy-efficient.

  • nozzle
  • Pneumatic Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Resin Spray Nozzle "King Nozzle" TYPE-FML Series

Resin Spray Nozzle "King Nozzle" TYPE-FML Series

Especially effective for wash-off cleaning.

The 【TYPE-FML】 is a flat-type spray nozzle made of PP (polypropylene). It was developed as a high-flow version of our "TYPE-FM" and further enhances the impact power of FM. It is particularly effective for washing off dirt and is also suitable for watering and defoaming. Since it is a one-piece design, there are no combinations. There are four types available based on the difference in spray nozzle diameter. The spray angle and spray volume vary depending on the nozzle diameter. Additionally, being made of resin, it is resistant to acids and alkalis, making it ideal for surface cleaning before painting or plating.

  • nozzle
  • spray
  • Plating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.