We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

121～135 item / All 373 items

Displayed results
2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. The internal mixing design allows for the atomization of liquid by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sonosys Ultrasonic Spray Nozzle

Sonosys Ultrasonic Spray Nozzle

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibrations of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or float due to the influence of the wind. Therefore, carrier air is used to transport the formed particles for application.

  • Zerstaueber-small-01-webeite.png
  • Zerstäuber-Generator mit Lüfter.jpg
  • nozzle
  • Coating Machine
  • Ultrasonic Oscillator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

Cleaning PEEK nozzle for 8-channel ELISA plates. Liquid dispensing and stopping can be done with a single thumb action. Videos are currently being streamed on our company website!

This is a new product for microplate washing with an 8-channel nozzle that improves the shortcomings of the previously difficult-to-use ImmunoWash8. It features a grip design for easy handling, and liquid stopping is a one-touch operation with just a push of the thumb. It allows for the delivery of washing solution to the plate using only gravity from a height of 30 cm. We offer two types: one for high flow using gravity (a competitor to ImmunoWash8) and another for high-speed using a pump. The gravity discharge Immuno Nozzle 8Z can accommodate pipette tips, eliminating concerns about contamination. It provides fast liquid discharge even with a height difference of 30 cm. The high-speed nozzle is made of PEEK and has an outer diameter of 1.6 mm, making it ideal for cleaning difficult-to-wash magnetic beads. Using an optional pump and valve bottle set makes microplate washing even easier. It is highly recommended for the cleaning of complex and precision-demanding ELISA reactions. Each of the 8-channel nozzles is removable and can be swapped with plugs to accommodate 24-well plates, 6-well plates (4-channel, 2-channel), and other plates. Additionally, all parts are screw-type and can be easily detached, making nozzle cleaning simple. Measures against clogging are also thoroughly addressed.

  • Other cleaning machines
  • Plastic utensils and containers
  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'

[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

Our company offers a wide range of "tank cleaning nozzles" manufactured by Lehner, which are essential for the product manufacturing processes in the food, beverage, and medical fields. These nozzles comply with various international standards related to hygiene and explosion protection, including FDA (U.S. Food and Drug Administration), 3A standards, and ATEX directives. Additionally, they possess high impact force even at low pressure, contributing to increased operational efficiency by reducing cleaning liquid usage and shortening cleaning time. Effective cleaning can be achieved. ★ We are currently providing materials that include the standards our products comply with and layout photos! You can read them immediately from the 【PDF Download】. 【Features】 ■ Excellent hygiene and explosion protection, compliant with EHEDG standards and regulation (EC) no. 1935/2004, among others. ■ A lineup of 20 types tailored to various applications, including fixed spray balls and rotating tank cleaning nozzles. ■ Capable of foam spraying. In addition to lending demo units, you can visualize the effects of switching to Lehner tank cleaning nozzles using our advanced software, TankClean, to see what benefits might arise. 2024/10/17 ◆ We have added the long-awaited case studies.

  • Lechler_General-Industry _Tank-Cleaning-Nozzles.jpg
  • D1329_063.jpg
  • D1329_091.jpg
  • D1329_067.jpg
  • nozzle
  • Food Cleaning Equipment
  • Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sonaer ultrasonic spray nozzle manufactured by Sonia Corporation

Sonaer ultrasonic spray nozzle manufactured by Sonia Corporation

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

Ultrasonic waves generated by piezoelectric ceramics are transmitted to the spray nozzle (atomizer), where they vibrate the liquid film to create extremely fine particles for spraying. Liquid can be supplied and sprayed into fine particles without the need for pressurization. The flow rate varies depending on the model, but it can accommodate a wide range from a minimum flow rate of 10 ml/min to a maximum of 100 ml/min. Since pressure is not applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid. Additionally, there is no need for a large painting booth. This achieves a reduction in capital investment and running costs. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.

  • valve
  • Ultrasonic Oscillator
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We will be exhibiting at the 2023 Osaka Machine Processing System Exhibition!

We will be exhibiting at the 2023 Osaka Machine Processing System Exhibition!

We will be showcasing steel coolant nozzles, Micromag, coolant savers, and more! 【Demonstrations available!】

Our company will be exhibiting at the "2023 Osaka Machine Processing System Exhibition" held at Intex Osaka, Hall 5 A and B, from February 16 (Thursday) to 17 (Friday), 2023. To prevent the spread of the novel coronavirus, we will comply with the exhibition guidelines in collaboration with the organizing committee and will create an environment that ensures safety and security for the event. We will mainly showcase deburring and coolant filtration systems. We understand that you are busy, but we kindly ask for your visit.

  • Other machine tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Flounder Farming in Jeju Island, South Korea (1200L/min OK Nozzle)

[Case Study] Flounder Farming in Jeju Island, South Korea (1200L/min OK Nozzle)

Using the "1200L/min OK nozzle"! It is expected to cover an area of about 8,000 to 10,000 m2 of water surface.

At the Jeju flounder breeding farm "Sangji Fisheries," an oxygen dissolution system using the "large nozzle MB1,200" has been introduced. The total water surface area of the farm is approximately 25,000 m2. One "MB1,200L nozzle" is expected to cover an area of about 8,000 to 10,000 m2. [Case Overview] ■ Jeju flounder breeding farm "Sangji Fisheries" - The total water surface area of the farm is approximately 25,000 m2 - One "MB1,200L nozzle" is expected to cover an area of about 8,000 to 10,000 m2 *For more detailed information about the case, please refer to the related link. For further inquiries, feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

This is a cutting-edge dispenser nozzle utilizing micro-drilling technology, thin-walled processing technology, and precision machining technology.

A high-precision dispensing nozzle specifically designed for "narrower" and "deeper" pinpoint applications in high-density semiconductors with densely arranged parts. This is the most advanced dispenser nozzle created by Tekudai, set to launch in the fall of 2024. ◆ An ultra-fine tip with a thickness of 0.02mm, optimal for "narrower" points Utilizing advanced thin-wall processing technology, the difference between inner and outer diameters is controlled to the extreme (thickness of 0.02mm). It can reach into the narrow gaps of high-density semiconductors. ◆ A 2mm long tip that reaches "deeper" points The length of the nozzle tip has been doubled from the conventional 1mm to 2mm. This allows for precise dispensing at deep points, such as between components. Additionally, our unique integrated processing achieves high-precision dispensing, unlike the press-fit method.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater-equipped long extension nozzle

Heater-equipped long extension nozzle

Two types are available depending on the length of the heater! It is equipped with a contact bush.

Here is an introduction to our "Heater-equipped Long Extension Nozzle." This product features a heater attached to the extension nozzle. It is equipped with a contact bush and has a valve-less mechanism. There are two types, Type A and Type B, depending on the length of the heater, and the manifold specifications are the same as standard. 【Type A Specifications】 (L dimensions: tolerances) ■40mm: -0.02/-0.04 ■45mm: -0.02/-0.04 ■50mm: -0.02/-0.04 *For more details, please refer to the PDF document or feel free to contact us.

  • Other machine elements
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Use of Nanobubbles in Irrigation Cultivation of Mini Tomatoes

[Case Study] Use of Nanobubbles in Irrigation Cultivation of Mini Tomatoes

Mini tomatoes thrive with nanobubbles! Depending on the variety, there are cases where the harvest increased by 5% to 35%.

Here is a case study from Kumamoto Prefecture using nanobubbles in the irrigation cultivation of mini tomatoes. In 2014, simply incorporating the "200L/min OK nozzle" into the existing pipeline resulted in an increase in harvest of 5% to 35%, depending on the variety. In 2015, by adding 10% oxygen and using the OK nozzle with pig manure, organic fertilizer was produced, leading to a 46% increase in harvest. 【Case Summary】 <2014> ■ Just incorporating the 200L/min OK nozzle into the existing pipeline ■ Harvest increase of 5% to 35% depending on the variety ■ Use of well water ■ Irrigation volume approximately 150% ■ Liquid fertilizer without solidification ■ Increased fertilizer amount ■ Irrigation tubes are cleaned *For detailed information about the case, please refer to the related links. For more information, feel free to contact us.

  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MIG torch gas nozzle

MIG torch gas nozzle

Introduction of the gas nozzle for MIG torches handled by Yamaki!

The "Gas Nozzle for MIG Torch" is a MIG welding-related product handled by Yamaki. We offer the "WPAN-200" and "WPAWN-400" with an inner diameter of 13φ. Our company also accepts the production and customization of machines tailored to our customers' needs, as well as machine repairs. Since we manufacture parts and products in-house, we can keep the prices of parts and products low, leading to cost reductions for our users. 【Specifications】 ■WPAN-200 ・Inner diameter φ: 13 ・Compatibility: YWP WPMA-200, DAIHEN WTA-200 ■WPAWN-400 ・Inner diameter φ: 15 ・Compatibility: YWP WPMAW-400, DAIHEN WTAW-400 *For more details, please refer to the PDF document or feel free to contact us.

  • Welding Machine
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Defoaming nozzle "FN120CWA, FN120CWS"

Defoaming nozzle "FN120CWA, FN120CWS"

Instantly eliminate clogs with the defoaming nozzle! Available in two types: stainless steel resistant to rust and ABS resin!

At Niikura Industrial Co., Ltd., we have been continuously developing various spray nozzles using our own technology for over 50 years. We carry out standardization, thoroughly manage manufacturing and quality control, maintain a constant stock of standard products (SUS304, ABS resin), and are equipped for immediate delivery. We offer two types of products: one made of ABS resin and the other made of stainless steel. 【Features】 ○ Immediate clogging resolution ○ Significant weight reduction ○ Rust-resistant ○ 10,000 movable tests conducted For more details, please contact us or download the catalog.

  • nozzle
  • spray
  • Piping parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.