nozzle Product List and Ranking from 286 Manufacturers, Suppliers and Companies

Multi-Channel Jet FL-600SY (Air Nozzle)

The noise level has decreased by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

Lechler multi-channel jet (air nozzle) A new low-noise flat jet nozzle has been introduced for the multi-channel jet! When replaced with a 4mm pipe, the noise level is reduced by approximately 60%. Air consumption can also be reduced by about 33%. The new air nozzle 'FL-600SY' is suitable for draining water, blowing away debris, and drying in very narrow spaces with flat air. By using SUS-316L material, it has become a product that can be used not only in general industry but also in food service and medical applications. ◆ For product details, please refer to the catalog or contact us. *Lechler GmbH is a German spray nozzle manufacturer.

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Pneumatic Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sonic Case Studies in the Steel Industry [Removal of Residues on Plates]

Using it before the final drying provided results that exceeded expectations in terms of drying effectiveness.

Sonic Corporation's 96” (2.44m) air knife operates with the Sonic 100 (15 horsepower motor). Long steel plates flow under the air knife at speeds of 1.22m/min to 3.05m/min. The widths of these steel plates range from 48” to 96” (1.22m to 2.44m). Typically, this line runs for several days in two shifts and then stops for several days. Essentially, it operates continuously without stopping during the given shifts. This system provides unparalleled satisfaction to customers and has achieved exceptional drying effects when used before final drying to blow away a significant amount of residual water. [Content] [Issues] ○ After blasting the material, it needs to be wiped and all remaining sand particles must be completely blown away. ○ In special cases, residual shot can occur that passes through the cleaning brush. ○ Residual shot material sticks to large electromagnetic components, making transportation hazardous. For more details, please contact us or download the catalog.

Company：ティックコーポレーション本社
Price：Other

Drying Equipment
nozzle
others
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler banana nozzle

Ideal gardening spray nozzle for gentle and even watering, perfect for seedling cultivation!

Sakata Seed Corporation has started selling the watering tool "Banana Nozzle," which uses spray nozzles from our partner manufacturer, Lechler GmbH in Germany. It is a watering tool that is gentle on seeds and suitable for seedling production. Thanks to the nozzle's special structure, it allows for fine and delicate watering. The soft impact prevents the soil from being dug up and the seeds from being moved during watering, thereby reducing the risk of delayed germination and poor seedlings. The main body is made of aluminum, weighs approximately 270g, and is palm-sized with a width of 16cm and a depth of 5cm, making it easy to use by simply attaching it to a hose. It can water up to 3 meters away just by connecting it to a regular water supply, allowing for efficient watering without the need to make multiple trips in the seedling production area. Each part can be disassembled, making maintenance easy in case of clogging or other issues. It is also convenient for cleaning dirty boots or light trucks used in agricultural work. *Source: Sakata Seed Corporation website*

Company：ティックコーポレーション本社
Price：Other

nozzle
others
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehiler manufactured rotary tank cleaning nozzle (Model: 5S2 / 5S3)

"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

The 5S2 / 5S3 series performs spraying with a special flat jet nozzle, allowing for powerful and uniform cleaning. Additionally, effective cleaning is achieved by controlling the rotation. It is available in various spray angles and flow rates. Lechler's monitoring sensors can be used. *Lechler GmbH is a German spray nozzle manufacturer.*

Company：ティックコーポレーション本社
Price：Other

Food Cleaning Equipment
nozzle
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehiler rotary tank cleaning nozzle (Model number: 577)

Powerful cleaning with a special shape nozzle from Lechler! This shape is unique to Lechler!

The 577 series cleans with powerful impact using a specially shaped nozzle. We offer nozzles with various flow rates and spray angles. Therefore, it is possible to select the appropriate tank cleaning spray nozzle based on the shape and application of the tank. Additionally, the nozzle's orifice is large, making it less prone to clogging. *Lechler GmbH is a German nozzle manufacturer.

Company：ティックコーポレーション本社
Price：Other

High pressure cleaner
nozzle
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reihler rotary tank cleaning nozzle (Model: 5TB series)

The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

The 5TB series, along with the 5TA series, is a tank cleaning nozzle suitable for the pharmaceutical and food and beverage industries. The high-performance solid jet spray, controlled by gears, effectively removes stubborn dirt. Additionally, it features high-quality surface treatment. *Lechler GmbH is a German spray nozzle manufacturer.*

Company：ティックコーポレーション本社
Price：Other

Beverage Production Equipment
nozzle
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehilar's rotary tank cleaning nozzle (Model: 5MC Series)

Efficiently clean the tank with Lechler's innovative slot design!

The 5MC series efficiently cleans the tank with its innovative slot design. The latest bearing structure ensures durability and reliability. This nozzle is made entirely of stainless steel and is designed for high-temperature use. In addition to stainless steel, we also offer Hastelloy versions. We can also provide ATEX versions upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

Company：ティックコーポレーション本社
Price：Other

Beverage Production Equipment
nozzle
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehilar manufactured rotary tank cleaning nozzle (Model: 5MI series)

Lecher: Efficiently cleans the tank with an innovative slot design!

The 5MI series efficiently cleans the inside of tanks with its innovative slot design. The latest bearing structure ensures durability and reliability. This MiniSpinner is made entirely of stainless steel and is designed for high-temperature use. In addition to stainless steel, we also offer Hastelloy versions. An ATEX version is available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*

Company：ティックコーポレーション本社
Price：Other

Beverage Production Equipment
nozzle
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-channel jet FL-600PP (air nozzle)

Sister product of the best-selling Rehiller air nozzle FL-600E, made of PP material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German nozzle manufacturer.*

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Pneumatic Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multichannel Jet FL-600M4 (Air Nozzle)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Rehira's multi-channel jet (air nozzle) allows for laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, it can also minimize air consumption. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Pneumatic Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Apply softly to improve coating efficiency! 'Ultrasonic Spray Nozzle'

Atomize the coating liquid with piezo vibration! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to vibrate liquids. It forms fine particles and sprays them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. There is no waste of the application liquid, and a large booth is not necessary. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and has high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★ We are currently offering a demo unit for you to try out! ★

Company：ティックコーポレーション本社
Price：Other

Other processing machines
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'

Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

Our company offers a wide range of "tank cleaning nozzles" manufactured by Lehner, which are essential for the product manufacturing processes in the food, beverage, and medical fields. These nozzles comply with various international standards related to hygiene and explosion protection, including FDA (U.S. Food and Drug Administration), 3A standards, and ATEX directives. Additionally, they possess high impact force even at low pressure, contributing to increased operational efficiency by reducing cleaning liquid usage and shortening cleaning time. Effective cleaning can be achieved. ★ We are currently providing materials that include the standards our products comply with and layout photos! You can read them immediately from the 【PDF Download】. 【Features】 ■ Excellent hygiene and explosion protection, compliant with EHEDG standards and regulation (EC) no. 1935/2004, among others. ■ A lineup of 20 types tailored to various applications, including fixed spray balls and rotating tank cleaning nozzles. ■ Capable of foam spraying. In addition to lending demo units, you can visualize the effects of switching to Lehner tank cleaning nozzles using our advanced software, TankClean, to see what benefits might arise. 2024/10/17 ◆ We have added the long-awaited case studies.

Company：ティックコーポレーション本社
Price：Other

nozzle
Food Cleaning Equipment
Other cleaning machines
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler fine mist cooling spray nozzle

The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.

The Rehira Corporation's spray nozzle (model number: 2MN series) is a spray nozzle specifically designed for fine mist cooling. It makes a significant contribution to countering the extreme heat in summer and the dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is utilized not only in the agricultural market but also in industrial markets (food, semiconductors, paper manufacturing) for temperature and humidity control. A major feature of the fine mist spray is its ability to regulate temperature and humidity without wetting crops, livestock, or products.

Company：ティックコーポレーション本社
Price：Other

others
nozzle
Other environmental measures and recycling
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler company manufactured spray nozzle for denitrification and desulfurization.

Provides efficient and effective corrosion-resistant ceramic nozzles in flue gas desulfurization towers from spray nozzles for denitrification that require complete evaporation.

Rechler, a company with 140 years of history and tradition, offers special spray nozzles. Various power plants, including coal-fired plants that are forced to reduce CO2 emissions, use spray nozzles for denitrification systems and spray nozzles for flue gas desulfurization towers. For denitrification, where complete evaporation is necessary, efficient and effective chemical reactions are required within the flue gas desulfurization tower, and ceramic nozzles that are resistant to corrosion and wear are essential. Rechler has also started providing mist separators, which are always necessary at the top. In addition to power plants, there is also a growing need for scrubbers in shipbuilding, and Rechler supplies various types of spray nozzles and mist separators.

Company：ティックコーポレーション本社
Price：Other

others
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler DryMASTER Spray Dryer

The spray nozzle newly developed by Lehira! A suitable spray nozzle is essential for producing powders!!

Lechler Spray Drying Nozzle Commonly known as: DryMASTER Lechler, with over 140 years of history and experience, has positioned itself to challenge new fields by developing and starting the sale of spray nozzles specifically for powder drying. Creating uniform powders through spray drying required various innovations. Additionally, the DryMASTER nozzle can be used for countless applications. It is suitable for food powder production and can also be used in pharmaceuticals. It complies with FDA (U.S. Food and Drug Administration), EC No. 1935/2004, and GB4806 standards. The groundbreaking initiative of this product is the Lechler Carbon Recycling Program, which considers SDGs (Sustainable Development Goals) and focuses on the recycling of consumable carbon materials. In other words, it aims to recycle consumables. This is a first in the nozzle industry. This product is different from conventional nozzles!

Company：ティックコーポレーション本社
Price：Other

nozzle
Food ingredients (powder)
Beverage ingredients (powder)
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler XactClean HP 2

The successor model of the best-selling tank cleaning product XactClean HP+.

Fusion of Tradition and Innovation With the XactClean HP 2, the portfolio of tank cleaning nozzles from Reihler will adapt to the future. This is due to the further development of the proven rotary tank cleaning nozzle XactClean HP, which has become more efficient and can better meet hygiene requirements. The year 2015 marked a change in Reihler's focus with the launch of the explosive bestseller XactClean HP. This tank cleaning nozzle bridged the gap between cost-effective (but less efficient) spray balls and surge cleaners and cost-effective (but highly efficient) high-pressure tank cleaning nozzles. Since then, powerful and efficient cleaning has been made available at an attractive price. During this time, this concept has undergone thousands of application tests and achieved success. Eight years later, Reihler launched its optimized successor, the XactClean HP 2. ≪Attention!≫ The new offering of Hastelloy 22 is now available.

Company：ティックコーポレーション本社
Price：Other

nozzle
Other mixing machines and tanks
Food Cleaning Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PressureClean (High-Pressure Tank Cleaning Nozzle)

Finally here! High-pressure washing tank cleaning nozzle "PressureClean"

The Rehira company has finally unveiled its high-pressure tank cleaning nozzle! We have expanded our lineup with high-pressure cleaning. This product can effectively clean stubborn dirt from small tanks using only a small amount of water. PressureClean is rated at cleaning efficiency class 5 and features an IP-65 certified motor housing. This nozzle is characterized by being made from high-quality materials (SUS316 L, EPDM, PTFE, PEEK, ceramic). The interface with the tank uses a clamp connection compliant with DIN 32676 (TriClamp).

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehira's spiral full cone nozzle

Spiral? Helix? Pig tail? They are all the same spiral nozzle.

Rehira Corporation has announced a newly developed spiral full cone nozzle based on its long experience, history, and achievements. This nozzle features the ability to spray at a specific angle with low pressure. The reason for this is that the fluid is accelerated in the vertical axis direction and sprays outward due to its spiral structure. This nozzle is designed to form multiple spray cones (hollow cones), which is different from a typical full cone. As a result, it can generate fine particle sizes. The standard material is SUS316L, but it is also available in other materials.

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PopUp Whirly Air Hygienic

A new member has joined the PopUp nozzle.

Name: PopUp Whirly Air Hygienic Series: 5P7 = Features = The biggest feature of the new PopUp nozzle is its ability to automatically clean itself with air after use. This device rotates automatically using water pressure. It is suitable for cleaning pipes, ducts, and the interiors of cyclones. This nozzle is tightly attached to the inner wall and extends with air pressure during cleaning. Once the cleaning is complete, the spray nozzle returns to its original position and closes securely with the force of a spring. The built-in IO-Link compatible position monitoring sensor constantly informs the operator of the current position of the nozzle. The nozzle can be operated and cleaned with compressed air due to the air pressure retraction. Furthermore, with this design, the nozzle automatically drains from any direction. *The video is animated, but it clearly shows where the device can be installed.*

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Lechler Tank Cleaning Nozzle MeshClean+

Powerful cleaning jet! Consistently hygienic design! Reliability of the process! With a long lifespan, "MeshClean+" efficiently cleans stubborn dirt.

With its powerful cleaning jet, consistently hygienic design, process reliability, and very long lifespan, "MeshClean+" is the top choice for efficiently cleaning stubborn dirt in medium to large tanks. New features of "MeshClean+" The high-impact tank cleaning machines in the "MeshClean+" series are classified as cleaning efficiency class 5 and are designed to remove stubborn dirt from medium to large tanks. The spray head of this high-impact tank cleaning machine is driven by the cleaning liquid. The patented spur gear ensures precise speed and sufficient torque, providing process reliability. Its simple and open-flow design makes the spur gear particularly hygienic and extremely robust. The specially developed solid jet nozzle of "MeshClean+" achieves top-notch cleaning results even where other cleaning nozzles reach their limits. Carefully adjusted kinematics guarantee optimal interaction between speed and cleaning pattern. As a result, a reliable, efficient, and rapid cleaning process is realized.

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless piping for mist nozzles (fine mist cooling) ≪Commonly known as: Easy Pipe≫

The mist nozzle (fine mist cooling nozzle) is here with three advantages: easy installation, time-saving, and durability!

Although I purchased a mist nozzle (fine mist cooling), it's quite difficult to install and position it with the tube... This Easy Pipe solves that problem. <<Maximum Features>> - No risk of cap falling off due to knurled finish! - Just turn it by hand! It greatly contributes to countermeasures against the intense heat in summer and dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is used not only in the agricultural market but also in the industrial market (food, semiconductors, paper manufacturing) for temperature and humidity control. A significant feature of the fine mist spray is that it can regulate temperature and humidity without wetting crops, livestock, or products. Isn't it quite a hassle to connect such an important nozzle with piping? With the Easy Pipe, the connection is easy! It's more durable than a tube and can be attached and detached easily.

Company：ティックコーポレーション本社
Price：Other

Piping Materials
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehiler manufactured rotary tank cleaning nozzle (Model: 5S5 series)

High-impact, high-reliability control rotary cleaning nozzle! "Supports up to 9.6m," "High flow rate, high cleaning power," "Compatible with rotation monitoring sensors."

Product Name: XactClean HP+ (Series 5S5) Ideal for large tank cleaning. Achieves uniform and powerful cleaning with high-impact flat jets and controlled rotation. Key Features: • High-impact cleaning with specially designed flat fan nozzle • Suitable for large tanks with controlled rotation and high flow rate • High reliability ensured by a robust drive unit • Compatible with Lechler's rotation monitoring sensors • Food and pharmaceutical compliant (EC No. 1935/2004 and FDA compliant) Technical Specifications: • Cleaning target diameter: 0.25 to 9.6m • Maximum operating temperature: 95°C • Recommended operating pressure: 3 bar • Filter specification: 0.3mm / 50 mesh • Installation orientation: All directions compatible • Bearing structure: Double ball bearing • Connection sizes: 1 BSPP, 1 1/4 BSPP, 1 1/2 BSPP (HygienicFit compatible) • Material: 316L stainless steel, PEEK, EPDM This nozzle is an ideal solution for large tank cleaning in the food, pharmaceutical, and chemical sectors, achieving both cleaning quality and process management.

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Beverage Production Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehiler manufactured rotary tank cleaning nozzle (model number: 5P8/5P9)

Pneumatic control type protruding rotating nozzle specialized for automatic cleaning of ducts and cyclones: 'SIP compatible', 'usable under vacuum', 'compatible with horizontal and vertical structures'

Product Name: PopUp Whirly Air (Series 5P8/5P9) Protrudes only when needed for cleaning. Achieves hygiene and safety through air pressure control. Main Features: • Automatic protrusion and rotation cleaning via air pressure cylinder • Automatically retracts after cleaning, ensuring airtightness • Compatible with SIP (Steam Sterilization) and usable under vacuum • Dedicated models available for horizontal and vertical ducts and tower structures • Compliant with food and pharmaceutical standards (EC No. 1935/2004 and FDA) • Suitable for explosive atmospheres (ATEX certified) This nozzle maintains a high level of hygiene, cleaning efficiency, and safety in processes where cleaning nozzles cannot be permanently installed (e.g., product flow paths, spray shadow areas).

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Piping and Piping Parts
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rehila rotary tank cleaning nozzle (Model: 5P7)

Air pressure-operated protruding and rotating sanitary design cleaning nozzle! After cleaning, it is stored in a sealed manner, making it ideal for the food, pharmaceutical, and chemical industries.

The PopUp Whirly Air Hygienic is a pneumatically controlled protruding rotating nozzle designed for equipment where a cleaning nozzle cannot be permanently installed within the process. The nozzle extends only during cleaning, rotates to clean the surrounding area, and then automatically retracts and seals, ensuring both hygiene and safety. Key features: • The nozzle extends pneumatically and automatically retracts and seals after cleaning. • Can be completely flush-mounted to the wall (no protrusions). • Self-draining design accommodates almost all directions. • Position detection possible with IO-Link compatible sensors. • Can protrude without relying on hydraulic pressure (operates solely on pneumatic pressure). • Food contact compliant (in accordance with EC No. 1935/2004 and FDA). This nozzle achieves a high level of hygiene, cleaning efficiency, and maintainability in structures such as piping, containers, and cyclones where a cleaning nozzle cannot be permanently installed.

Company：ティックコーポレーション本社
Price：Other

nozzle
nozzle
Piping and Piping Parts
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrafine particle mist nozzle

Ultrafine Particle Mist Nozzle

This is a super low-pressure ultra-fine particle mist nozzle. It is a nozzle that is gaining attention in various fields. Many people may have seen mist coming out in places like train stations during the summer, haven't they?

Company：CHAMPION CORPORATION
Price：Other

Other environmental equipment
nozzle
Pneumatic Equipment
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nozzle "Plaguate Nozzle NH Series"

FISA's unique gate opening and closing system!

This series is a plunger gate nozzle powered by resin pressure and springs. It can be integrated into molds for thermoplastic resin injection molding, eliminating waste from sprues and runners during molding. Additionally, the nozzle mechanism adopts a unique valve gate system from FISA that automatically opens and closes the gate using resin pressure as power, without the need for external drive devices. 【Features】 ■ Good gate balance ■ Beautiful gate finish ■ The nozzle can be set at any angle *For more details, please contact us or download the catalog.

Company：フィーサ本社営業部、ダイナック事業部、北関東支社、中部支社、大阪支社
Price：Other

Injection Molding Machine
Other machine elements
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pragate Open Nozzle "GTH Series"

Prevent scorching caused by residual resin materials! A hot runner molding device that achieves runnerless molding at a low cost.

The "GTH Series" is a plunger gate open nozzle that can suppress injection defects caused by gate clogging and the occurrence of cold slugs. Thanks to the effect of the built-in special chip, it reduces stringing and dripping. Direct gate settings to molded products are possible. It has a low number of parts, excellent maintainability, and is easy to integrate into molds. 【Features】 ■ Eliminates issues unique to open nozzles ■ Structure with no stagnant areas ■ Clean gate finish ■ Simple structure ■ Achieves runnerless molding at a low cost *For more details, please refer to the PDF document or feel free to contact us.

Company：フィーサ本社営業部、ダイナック事業部、北関東支社、中部支社、大阪支社
Price：Other

Other molds
Other machine elements
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Nozzle for molding machine - Plagate shut-off nozzle 'NRS Series'

Achieve a reduction in the defect rate of molded products and a shortening of cycle time! Solve the two challenges of reducing injection molding costs with a unique system! No stringing or dripping!

The "NRS Series" is a plaguate shut-off nozzle for injection molding machines that can be mounted on various molding machines. The flow path, which has no stagnant areas, excels in color changeability and allows the use of commercially available purge agents. It can be used not only for thermoplastic plastics but also for injection molding of Mirable silicone. We have solved two challenges in reducing injection molding costs (reducing the defect rate of molded products and shortening cycle times) with our unique system. ■ Reduction of molded product defect rate - Decrease in cold slugs - Suppression of short shots - Reduction of silver generation risk ■ Shortening of cycle times - Realization of mold opening operation during weighing - Reduction of cooling time - No need for shift molding We also have nozzles available for loan. *For more details, please refer to the PDF materials or feel free to contact us.

Company：フィーサ本社営業部、ダイナック事業部、北関東支社、中部支社、大阪支社
Price：Other

nozzle
Injection Molding Machine
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FISA Corporation "Praguet Nozzle" Product Catalog

We have a variety of series of plunger nozzles available!

This catalog features the "Plagate Nozzle" products from a company that handles hot runner molding equipment, LIM molding equipment, static eliminators, and more. It includes the "NH Series," which uses resin pressure and springs as power, the "AH Series," which enhances the fluidity of resin near the gate and has low residual stress, and the "GH Series," which pursues versatility and demonstrates effectiveness in various scenarios. [Contents] ■ Plagate Nozzle Products ■ Plagate Nozzle Parts *For more details, please contact us or download the catalog.

Company：フィーサ本社営業部、ダイナック事業部、北関東支社、中部支社、大阪支社
Price：Other

Injection Molding Machine
nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Special rubber nozzle

Special Rubber Nozzle ■□■Features■□■ ■Available in two standard types: round (○) and triangular (△), with nozzles in various sizes (3", 4", 5", 6"). ■The connection to the exhaust hose features a 500mm metal spiral hose, which prevents deterioration of the exhaust hose due to increased exhaust temperature. ■Exhaust gases emitted from the vehicle's muffler simultaneously draw in surrounding air through the nozzle, effectively lowering the temperature within the exhaust hose and allowing for efficient discharge to the outside. ■The internal grip nozzle is effective for diffuser types where the muffler is not exposed. ■For more details, please contact us.

Company：ヤマダコーポレーション
Price：Other

nozzle
nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

nozzle Product List and Ranking from 286 Manufacturers, Suppliers and Companies | IPROS GMS

nozzle Manufacturer, Suppliers and Company Rankings

nozzle Product ranking