Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
166～180 item / All 821 items
The half-cut press machine can perform half-cutting while leaving a minimum of 0.03mm.
Utsunomiya Industries owns a super cutter and an all-purpose press (NC continuous die-cutting machine). Additionally, we can work in a clean booth during the processing of precision components such as semiconductors.
Achieving high-pressure presses as per theoretical values! Various types available for research and development.
The press frame manufactured using our unique method of machining thick plates to create cutouts does not experience aging changes such as warping or deformation commonly seen in traditional welded structures. It allows for high-pressure pressing as per theoretical values. Additionally, the press room can move sideways, offering excellent operability and safety. It can also operate at high temperatures of up to 2,800°C in a high-pressure atmosphere of up to 0.99 MPa, similar to a gas pressure high-temperature furnace. 【Features】 ■ No aging changes such as warping or deformation ■ High-pressure pressing as per theoretical values ■ Sideways movement of the press room ■ Excellent operability and safety ■ Capable of high-temperature operation up to 2,800°C in a high-pressure atmosphere of up to 0.99 MPa *For more details, please refer to the PDF document or feel free to contact us.
We deliver an eco-friendly environment.
Using a hybrid hydraulic unit enables stable molding. Since it has a built-in inverter, electricity costs are reduced to one-third of the conventional amount!
Hydraulic press, molding press, hot press, etc.
We design and manufacture efficient hydraulic presses tailored to user needs, ranging from 10 tons to 1,000 tons.
Flexible proposals in response to manufacturing requests such as production jigs and process improvement jigs.
We will propose electrical inspection jigs and devices based on the products and data (such as STEP and DXF) entrusted to us by our customers. Each unit is carefully finished from processing with machining and routing machines to assembly and wiring.
Easy operation method! It features a welded structure made of steel plates with sufficient strength, and has undergone complete annealing.
The "HFPD type" is a deep drawing hydraulic press that allows for easy inching descent and lower limit stops, making die changes and setups quick. In drawing processes, the ram's descent speed decreases, ensuring reliability. Additionally, the long stroke allows for easy installation regardless of the size of the die. We also offer a variety of products, including the cost-effective hydraulic punch presses "CH-15/CH-25," the multipurpose hydraulic press "HCP type," and "LC Cutter." For more details, please feel free to contact us. 【Features】 ■ Easy inching descent and lower limit stops for quick die changes and setups ■ Reliable as the ram's descent speed decreases during drawing processes ■ Long stroke allows for easy installation regardless of die size ■ Simple operation method ■ Equipped with a die cushion *For more details, please refer to the PDF materials or feel free to contact us.
We correct the bending of shafts, axes, and rods, and straighten the distortion of fabricated parts.
We use a hydraulic press to correct the bending of shafts, axles, and rods. We also straighten the distortion of canning parts.
Products with uneven shapes can also be made through pressing! Introducing our processing technology.
At Sugiyama Industrial Co., Ltd., we perform "irregular drawing presses." Through multiple pressing processes, we can process not only simple shapes but also products with uneven shapes. Please feel free to consult us when you need our services. 【List of Metal Processing Technologies】 ■ Integral Deep Drawing Processing ■ Press Processing of Large Products ■ Irregular Drawing Press ■ Titanium Drawing Processing *For more details, please refer to the PDF materials or feel free to contact us.
![[AI Image Inspection Case] Seal Dimension Inspection](https://image.mono.ipros.com/public/product/image/867/2001492679/IPROS10173274604450187286.png?w=280&h=280)
The AI image inspection software measures the dimensions of the labels attached to the parts.
This time, we received an inquiry from a contract analysis company. Work size: approximately 100mm × 100mm. Seal size: approximately 10mm (width). We created a model and conducted a simple verification. In cases where we receive inquiries, there are many instances where we cannot send sample products or sample images due to compliance and security concerns. [Inspection Settings and Results] Using EasyInpector's "Dimension Angle Inspection," we referred to the materials you provided and measured the tolerances with the seals applied by our company. This time, we measured only one location for each seal, but it is actually possible to measure four points simultaneously. We used a 5-megapixel camera (2592 × 1944) with a field of view of 180mm horizontally, capturing images of a 100mm × 100mm metal plate. We measured by applying two seals, each 10mm wide. There was some slight shaking during imaging, resulting in an error of 3 to 4 pixels, but detection with an accuracy of 0.5 to 0.7mm in tolerance is theoretically possible. Increasing the camera resolution will improve accuracy further.
A hot forging press that completely achieves ultra-rigidity, high precision, and low noise.
The efficient forging process is achieved through a machine design with high rigidity structures and a wide range of eccentric load capacities. The high-precision hot forging has been realized by an X-diagonal guide design with a change in slide gap close to zero. High-quality and high-precision machining ensures the durability of the equipment.
Press accuracy ±20/100mm! With an easy-to-use design, we have sold over 3,000 units.
The "ABC-40 (Manual)" is a hydraulic automatic die-cutting machine with a four-pole structure (auto-balance structure). It can cut OPS, PET, and ABS materials. Additionally, it maintains high precision and rigidity, making it versatile for use with both small and large parts. 【Features】 ■ High cutting balance accuracy reduces wear on the surface plate ■ Equipped with rollers for moving the Thomson blade front and back on the table *For more details, please download the PDF or feel free to contact us.
Hydraulic automatic die-cutting machine with rotating device function (PP board micro-movement function with pressure plate attachment)
The "ABC-150 (Automatic)" is a hydraulic automatic die-cutting machine that maintains high precision and rigidity due to its four-pole structure (auto-balance structure). By installing an end stopper, the continuous die-cutting accuracy is improved. Additionally, a light beam safety device is installed at the front, and covers are attached on three sides, ensuring high safety. 【Features】 ■ User-friendly design with over 3,000 units sold ■ Versatile use for small to large parts ■ Table stop accuracy ±20/100mm ■ Press accuracy ±20/100mm ■ Capable of cutting OPS, PET, ABS materials, etc. *For more details, please download the PDF or feel free to contact us.
![[Delivery Example] Hydraulic Hot Press with Conveyor Belt](https://image.mono.ipros.com/public/product/image/ebc/2000790746/IPROS93326030792542014564.png?w=280&h=280)
We present examples of the delivery of hydraulic hot presses suitable for the adhesion of surface materials for wooden stairs.
We would like to introduce a case where we requested production from a Chinese manufacturer by adding Nishikou's technology. The "Hydraulic Hot Press with Conveying Belt" has a pressure of 100 tons and a heating plate size of 1500x2800. It uses a heat transfer medium for heating. Please feel free to contact us if you have any inquiries. 【Case Overview】 ■ Pressure: 100 tons ■ Heating Plate: 1500x2800 ■ Heat Source: Heat transfer medium heating *For more details, please refer to the PDF document or feel free to contact us.
Supports numerous options! It has a structure that emphasizes safety with high mechanical rigidity!
We would like to introduce our hydraulic cold press 'NTA48G-100T/13'. It features a structure that emphasizes safety with high machine rigidity. Please consult us for dimensions and other details. It supports a wide range of options, including the installation of floating drive conveyors and light beam safety devices. 【Specifications】 ■ Effective table dimensions: 1300×2500mm ■ Maximum pressure: 100 TON ■ Stroke: 1300mm ■ Overall dimensions: 3600×1900×4100mm ■ Net weight of the machine: 10000kg *For more details, please refer to the PDF document or feel free to contact us.
Maintenance performance has improved! Control functions such as preheating and pressurization can be operated via the touch panel.
The "NKSTN-4x8W" is a curved heat transfer machine with improved temperature accuracy and a two-stage sliding mechanism. Control of vacuum waiting, preheating, and pressure application is done via a touch panel, and the air pressure section has been changed to a unit, enhancing maintenance performance. It also accommodates maintenance of packing frames and silicone rubber, and can be manufactured according to your specifications. 【Features】 ■ Improved temperature accuracy ■ Control of vacuum waiting, preheating, and pressure application via touch panel ■ Enhanced maintenance performance with the air pressure section changed to a unit ■ Accommodates maintenance of packing frames and silicone rubber ■ Customizable to your specifications *For more details, please refer to the PDF document or feel free to contact us.
