pump Product List and Ranking from 1022 Manufacturers, Suppliers and Companies

For the chemical industry: Stabilization of discharge volume 【【Gear Pump Unit】】

To a more accurate discharge volume delivery.

A gear pump is a pump that has a gear structure and is widely used in industry. It is used in equipment with hydraulic systems, such as hydraulic excavators and forklifts. There are few contact points other than the gears and casing, making disassembly relatively easy, and it is used in a wide range of industries. Our company is capable of designing and manufacturing units that use gear pumps. *Please note that we will use purchased gear pumps.

Question and answer session

For more details, please refer to the PDF document or feel free to contact us.

Technical Handbook: Basic Knowledge of Pumps - About Newtonian Fluids

Shear stress is proportional to shear rate! An introduction to the properties of Newtonian fluids.

I would like to introduce "Newtonian fluids." The main fluid characteristics of liquids can be broadly divided into Newtonian fluids and non-Newtonian fluids. Newtonian fluids follow Newton's law of viscosity, where shear stress is proportional to shear rate. Examples include water, sugar solutions, and vegetable oils. 【Examples】 ■ Water ■ General solutions ■ Sugar solutions ■ Salt solutions ■ Motor oil ■ Vegetable oil *For more details, please refer to the PDF document or feel free to contact us.

Technical Handbook: Basic Knowledge of Pumps - About Leopexy Fluids

As time passes, the viscosity increases! Introducing the properties of fluids known as reverse thixotropic.

I would like to introduce "thixotropic fluids," which are one type of non-Newtonian fluid. Also known as inverse thixotropic fluids, they have the opposite property of thixotropic fluids, where the viscosity decreases when a force is applied. Instead, these fluids increase in viscosity over time when a force is applied. A representative example is clay slurry. 【Representative Example】 ■Clay Slurry *For more details, please refer to the PDF document or feel free to contact us.

Technical Handbook: Basic Knowledge of Pumps - About Bingham Fluids

Introducing the properties of Bingham fluids, such as butter and paste-like toothpaste!

I would like to introduce "Bingham fluids," which are one type of non-Newtonian fluid. These fluids exhibit flow only after a certain amount of force is applied, and their viscosity decreases beyond that threshold. Examples include butter spread on toast and paste-like toothpaste. 【Examples】 ■ Margarine ■ Tomato ketchup ■ Toothpaste ■ Shoe cream ■ Pâté *For more details, please refer to the PDF document or feel free to contact us.

Announcement of the renewal of the official website of Koken Chemical and the free loan service for demo machines.

We encourage you to take this opportunity to try out the demo unit and consider its implementation.

1. The Kaken Chemical official website has been completely renewed. The renewed site offers new information, an introduction to our services, an introduction to our products, and a members-only service. We will continue to update it regularly, so please take a moment to visit. https://kaken-kagaku.com 2. The renewed site allows you to view members-only confidential materials. Customers who wish to access these materials can register as new members from the member service introduction page below. https://kaken-kagaku.com/our-services/members-services/ 3. Announcement of free demo unit rental service. We are starting a free rental service for the PIC-10A for corporations and research labs considering product introduction, for evaluation and verification purposes. We encourage you to take this opportunity to try out the actual device and consider its introduction. 4. We have started a Facebook page! https://www.facebook.com/profile.php?id=100084306407950&sk=about_privacy_and_legal_info

Small DC centrifugal pump, long life, bearing type, for liquids.

Introduction of a small DC centrifugal pump (micro pump) with high lifespan bearing (PTFE tetrafluoroethylene) type for liquids.

Small DC centrifugal pump (micro pump) with long-life bearing (PTFE Teflon) type. We will provide the bearing (PTFE Teflon) type for liquids.

Food Sanitation Law Compliant Small DC Pump (Micro Pump)

Introduction of small DC pumps (micro pumps) compliant with the Food Sanitation Act.

Food Sanitation Act Compliant Small DC Pump (Micro Pump) Small DC Diaphragm Pump for Gases (Pressurization and Discharge) Small DC Centrifugal Pump for Liquids ■ Small DC Diaphragm Pump (Micro Pump) R27 Flow Rate UP Type for Gases Applications - Internal Pressure/Depressurization - Detergent Foaming - Airbrush - Gas Collection - Airbag Expansion/Contraction - Product Adsorption - Used in various other applications

Home-use cogeneration ultra-compact DC diaphragm pump

Home-use cogeneration ultra-compact DC diaphragm pump (micro pump) R15 type for gas (pressurized) proposal (under development)

Home-use cogeneration ultra-compact DC diaphragm pump (micro pump) R15 type for gas (pressurized) proposal (under development) Application proposals: - Fuel cells for automobiles - Water heaters - Home cogeneration - Smartphones The "R15 series" is a small DC diaphragm pump (micro pump) for gas. With a body weight of less than 15g, it is ultra-compact and has a durability of over 200 hours. It has also been adopted in gas detectors. We offer "R15A5A3K100" with a rated voltage of DC3V and "R15A5A6K100" with DC6V. ■ Features - Ultra-compact size - Proven adoption in gas detectors (handheld type) - Sample available - Low flow rate

Commercial OA equipment dry printer diaphragm pump R27

High pressure, low noise! It is used for various applications, starting with detergent foaming.

We would like to introduce our "Commercial Use OA Equipment Dry Printer Label Suction Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber parts primarily made of EPDM. It is used for various applications, including "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

Commercial copier ink distribution small DC diaphragm pump R27

Brush motors are available in DC 12V and 24V! Used in various applications such as "product suction."

We would like to introduce our "Commercial Copy Machine Ink Supply Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber components primarily made of EPDM. It is used in various applications such as "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact, lightweight ■ Self-priming ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

Inkjet printer ink distribution small DC diaphragm pump

High pressure, low noise! A lineup including the "R27A5A24K103" with a body weight of 60g!

We would like to introduce our "Industrial Inkjet Printer Ink Supply Air Small DC Diaphragm Pump (Micro Pump) Type R27." The lot size ranges from 1,000 to 10,000 units. It features high pressure and low noise, with rubber components primarily made of EPDM. It is used for various applications, including "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming ■ Motor with brushes: DC12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber components are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

Commercial copier toner transfer powder small DC diaphragm pump

Rubber parts are mainly made of EPDM! Compact DC diaphragm pump with self-priming capability, no priming water required.

We would like to introduce our "Industrial Copy Machine Toner Transfer Powder Small DC Diaphragm Pump (Micro Pump)." It is self-priming and does not require priming water, with a production lot of 1,000 to 10,000 units. It is compact and lightweight, and the rubber parts are mainly made of EPDM. It is used in various applications such as "internal pressure/depressure," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Motor with brushes: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

Commercial Inkjet Printer Nozzle Cleaning Spray Pump

Can be used for gases and liquids! It is adopted for various applications such as product adsorption.

We would like to introduce our "Commercial Inkjet Printer Nozzle Cleaning Small DC Diaphragm Pump (Micro Pump)" that we handle. It is self-priming and does not require priming water, with a lot size of 1,000 to 10,000 units. It is compact and lightweight, and the rubber parts are mainly made of EPDM. It is used for various applications, including "internal pressure/depression," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Compact and lightweight ■ Self-priming, no priming water needed ■ Usable for gases and liquids ■ Motor with brushes: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are mainly made of EPDM *For more details, please refer to the PDF document or feel free to contact us.

Commercial copier printer nozzle cleaning spray DC diaphragm pump

Compact and lightweight! We have a lineup including the "R27A5A12K103" for pressure/suction applications.

We would like to introduce our "Commercial Copy Machine Printer Nozzle Cleaning Spray Small DC Diaphragm Pump (Micro Pump)." It is self-priming, requires no priming water, and is available in lots of 1,000 to 10,000 units. It is small and lightweight, with rubber parts primarily made of EPDM. It is used for various applications, including "internal pressurization/depressurization," "detergent foaming," "airbag expansion/contraction," and "product adhesion." 【Features】 ■ High pressure, low noise ■ Small and lightweight ■ Self-priming, no priming water required ■ Usable for gases and liquids ■ Motor with brushes: DC3V, 12V, 24V ■ Brushless motor: DC12V, 24V ■ Rubber parts are primarily made of EPDM *For more details, please refer to the PDF document or feel free to contact us.