ring Product List and Ranking from 41 Manufacturers, Suppliers and Companies

Musashi Oil Seal Industry O-Ring Defect Cases

This is a ring designed to seal liquids and gases in reciprocating movements or fixed parts.

An O-ring is a synthetic rubber ring designed to seal liquids and gases in reciprocating motion or fixed parts. It is generally installed in a groove and exhibits sealing functionality through the stress generated by moderate compression. 【Failure Examples】 ■ Twisting ■ Galling ■ Flattening ■ Overall Wear ■ Extraction ■ Swelling ■ Hardening ■ Ozone Cracking ■ Overflow For more details, please contact us or download the catalog.

Company：武蔵オイルシール工業株式会社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Essential for those attaching and detaching eye bolts] Reduce the time for attachment and detachment to one-fifth!

It is used for the installation and removal of inserts in resin molding (injection molding) molds and die-casting molds.

The Quick Lift Double Swivel Ring 'QL.DSR' reduces the time for installation and removal to one-fifth compared to conventional lifting bolts (eye bolts). There is also a stainless steel version, the Stainless Steel Quick Lift Double Swivel Ring (SS.QL.DSR). 【Adoption Results】 Used in the installation and removal of resin molding (injection molding) molds and die-casting molds by major automobile manufacturers and outdoor sports manufacturers. 【Features】 ■ Safety factor that meets the high adoption standards of major companies (5 times) ■ Capable of lateral lifting, inversion, and pulling during load ■ Durability proven by passing a usage test of 20,000 cycles at 1.5 times the working load ■ Compatible with JIS standards from 8mm to 24mm. Also compatible with inch screws. The Stainless Steel Quick Lift Double Swivel Ring (SS.QL.DSR) is ideal for lifting in clean rooms, nuclear power plants, coastal areas, fuel cell factories, and food processing plants due to its excellent rust and corrosion resistance. *For more details, please download the PDF document or feel free to contact us.

Company：極東技研工業
Price：Other

Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis Service: Optimal Decision-Making for Technology Investment

Realizing the clarification of technological innovation! Our analysis and insights enable decision-making for technology investments.

If you need to understand the inner workings of cutting-edge technology products, Tech Insights is here to help. We have the ability to analyze the inner workings of products, their operational principles, and reasons through our unique methods, from systems to the nanoscale. Equipped with one of the world's most sophisticated in-house reverse engineering and technical analysis capabilities, we can uncover the technological innovations within a wide range of electronic devices and semiconductor elements. With the insights we provide, our clients can make informed decisions regarding technology investments that are suitable for their applications. [Examples of Analysis and Insight Utilization] - Identify successful products in high-growth technology markets and the reasons for their success. - Discover and anticipate problematic events such as technological innovations and the entry of new players. - Understand cutting-edge technology through independent and objective analysis of actual products. - Mitigate risks in product strategy, enter new markets, and capitalize on new opportunities. - Make product and pricing decisions more accurately, quickly, and confidently. *For more details, please refer to the PDF document or feel free to contact us.

Company：テックインサイツジャパン株式会社（TechInsights）
Price：Other

Patents

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

O-ring Fluoro Up S (low adhesion + low friction + low sticking + low outgassing)

Fluoroelastomer (FKM) material with low adhesion, low friction, low sticking, and low outgassing properties due to the O-ring cherry seal.

This material is made of fluororubber (type 2) that reduces phenomena such as stickiness (tackiness), adhesion, and gas release, which are characteristics of rubber materials. It has performance levels for heat resistance and chemical resistance comparable to general-purpose FKM. Sakura Seal Co., Ltd. offers a wide range of O-rings, from very small O-rings to large diameter rings, in various sizes and specifications according to JIS standards, and supports the appropriate selection of O-rings in terms of both material and size. * The fluororubber series, including the Fluoro-Up series, is the material that Sakura Seal Co., Ltd. specializes in the most. * We also accommodate shapes other than O-rings.

Company：桜シール日本本社
Price：Other

Piping Materials
Rubber
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

O-ring Fluoro Up V (Low Adhesion + Low Friction + High Vacuum Resistance)

Low adhesion and low outgassing fluororubber (FKM) material with O-ring cherry seal.

This material is a type of fluororubber (type 3) that has been designed to reduce phenomena such as the stickiness and adhesion characteristic of rubber materials, as well as gas release, to a certain extent while providing high vacuum resistance. It also possesses excellent heat resistance and chemical resistance, including resistance to strong acids and steam. Sakura Seal Co., Ltd. offers a wide range of O-rings, from very small O-rings to large diameter rings, in various sizes beyond the standard sizes specified by JIS standards, and we support the appropriate selection of O-rings in terms of both material and size. * Various types of fluororubber, including the Fluoro-Up series, are the materials that Sakura Seal Co., Ltd. specializes in the most. * We also accommodate shapes other than O-rings.

Company：桜シール日本本社
Price：Other

Sealing
Piping Materials
CVD Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

O-ring NBR-70-2 (Type 2 / Nitrile Rubber)

The O-ring cherry seal is molded from various materials including NBR-70-2 (type 2 / nitrile rubber) and is available in a wide range of sizes.

Among the materials made of nitrile rubber, acrylonitrile is highly contained, and due to its excellent oil resistance, it can also be used for fuel oils. However, it is inferior in weather resistance. Before JIS B2401:2012 established NBR-70-2, it was referred to as Type 2 (old JIS standard = JIS B2401:2005). Sakura Seal Co., Ltd. offers a wide range of O-rings, from very small O-rings to large diameter rings, not only in general standard sizes according to JIS standards but also supports the appropriate selection of O-rings in terms of both material and size. * We also accommodate shapes other than O-rings.

Company：桜シール日本本社
Price：Other

Fuel system parts
Engine parts
Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Protect against corrosion from red rust! Water quality improvement equipment for red rust and red water.

If you're troubled by red rust or red water in your cooling water, it demonstrates effectiveness beyond that of chemicals.

【For those troubled by red water in cooling systems】 Chillers, cooling towers, piping, heat exchangers… We will improve your red, murky cooling water and circulation water to be clear! 【We can solve all these concerns!】 ✓ Cooling water and circulation water have turned bright red ✓ Even after replacing the water, it quickly turns bright red again ✓ Red rust is occurring in the distribution pipes and heat exchangers ✓ The frequency of cleaning and maintenance is high, and you want to reduce effort and labor ✓ You want to improve rust issues and minimize damage to equipment By the way, these concerns are very common, as we have conducted over 100 cases of red rust and red water countermeasures over nearly 20 years. Red rust occurs in inconspicuous places within the piping, so it's easy to postpone countermeasures. However, during that time, the piping continues to weaken due to red rust. By the time you notice it, there may be holes causing water leaks, or the piping itself may break, leading to emergency repairs and the urgent shutdown of production lines, posing significant risks.

Company：アーカイブ【アクア・クリスタル・リング取扱専門店】
Price：Other

Water treatment equipment
Other water treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

O-ring "Material Properties and Applications"

[Sample available] This explains the material properties and applications of O-rings made from natural rubber and synthetic natural rubber.

The resistances in the table are primarily characteristics due to the polymer and may vary depending on the formulation. Please confirm through actual machine tests before use. 【Types of Rubber and Their Characteristics】 ■ Natural Rubber: Has elasticity and good mechanical properties such as abrasion resistance. ■ Synthetic Natural Rubber: Almost the same properties as natural rubber. ■ Styrene Rubber: Good abrasion resistance and aging resistance, and is inexpensive. ■ Butadiene Rubber: Has good elasticity and excellent abrasion resistance. ■ Chloroprene Rubber: Has average properties such as weather resistance, ozone resistance, heat resistance, and chemical resistance. ■ Butyl Rubber: Has good weather resistance, ozone resistance, and gas permeability, and is resistant to polar solvents. *Samples are available upon request. If you would like a sample, please apply through [Contact Us]. *Product documentation can be viewed from [Download].

Company：マスオカ東京
Price：Other

Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

O-ring "Groove Design"

Explaining the use of Tsubushi Shiro, gaps, and backup rings is possible with sample provision.

■Tsubushi Shiro When using O-rings for motion, Tsubushi Shiro significantly affects sealing effectiveness, dynamic resistance, and compression set, so it must be kept to a minimum. In cases of high speed or poor lubrication conditions, please make Tsubushi Shiro even smaller than standard motion O-rings. ■Gap At high pressure, gaps between the piston and cylinder, as well as between the rod and sleeve, can cause extrusion, leading to damage. This gap should be designed to be as small as possible. The use of backup rings is effective in preventing extrusion. ■Use of Backup Rings When pressure is applied from both sides, install backup rings on both sides of the O-ring. When pressure is applied from one direction, install one backup ring on the side opposite the pressure. If there is enough space, it is recommended to use two backup rings even for unidirectional pressure. *Samples are available upon request. If you would like a sample, please apply through the [Contact Us] section. *Product documentation can be viewed from the [Download] section.

Company：マスオカ東京
Price：Other

Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Explanation] Examples of O-ring malfunctions and their countermeasures

Possible sample provided: Explaining examples of O-ring defects and their countermeasures.

Name: We will introduce examples in the order of phenomenon, cause, and countermeasure. ■ Swelling: The rubber becomes soft, and the O-ring increases in size overall. The fluid used penetrates the rubber material → Change to a suitable rubber material. ■ Extraction: The rubber becomes hard, and the O-ring decreases in size overall. The plasticizer contained in the rubber material is extracted by the fluid used → Change to a suitable rubber material. ■ Permanent deformation: The O-ring is crushed and does not return to its original shape. The operating temperature is too high / The crush depth is too large → Change to a rubber material with good heat resistance / Review the groove dimensions or O-ring dimensions. ■ Overhang: The O-ring is torn either completely around or partially. It overhangs the gap between the groove and the mating surface and tears at the edge of the groove → Reduce the gap with the groove / Use a high-hardness O-ring or combine with a backup ring, etc. * Samples are available upon request. If you would like a sample, please apply through [Contact Us]. * Product documentation can be viewed from [Download].

Company：マスオカ東京
Price：Other

Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum A5052 thin-walled ring development VE proposal cost Tottori

If you need the development of thin aluminum rings in Tottori, leave it to us! 【Aluminum A5052, thin, ring, development, VE proposal, cost, Tottori】

【Material】 A5052 【Industry and Application】 Industrial equipment-related industry 【Lot】 1 to 1000 【Processing】 NC lathe 【Details】 This is processed using A5052. When considering aluminum cutting parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers in various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide prompt and appropriate responses to your requests! For more details, please visit our company website!

Company：松井製作所
Price：Other

valve

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum A6063 thin-walled ring development VE proposal cost Tottori

Leave the development of thin aluminum rings to us in Tottori! 【Aluminum A6063 Thin-walled Ring Development VE Proposal Cost Tottori】

【Material】 A6063 【Industry/Usage】 Industrial equipment-related industry 【Lot】 1 to 1000 【Processing】 NC lathe 【Details】 This is processed using A6063. When considering aluminum cutting parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider from the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

Company：松井製作所
Price：Other

valve

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum A6063 thin-walled ring development VE proposal cost Kansai

If you're looking for the development of thin aluminum rings in the Kansai region, leave it to us! 【Aluminum A6063, thin, ring, development, VE proposal, cost, Kansai】

【Material】 A6063 【Industry and Application】 Industrial equipment-related industry 【Lot】 1 to 1000 【Processing】 NC lathe 【Details】 This is processed using A6063. When considering aluminum cutting parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider from the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers in various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies that allow for consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leak testing) 3. Speed Our sales department includes members who have experience in design and processing, enabling us to provide quick and appropriate responses to your requests! For more details, please visit our company website!

Company：松井製作所
Price：Other

valve

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum A6063 thin-walled ring development VE proposal cost China

Leave the development of aluminum thin-walled rings in China to us! 【Aluminum A6063 Thin-walled Ring Development VE Proposal Cost China】

【Material】 A6063 【Industry and Application】 Industrial equipment-related industry 【Lot】 1 to 1000 【Processing】 NC lathe 【Details】 This is processed using A6063. When considering aluminum cutting parts, do you have any of the following concerns? - I don't know what processing method to use to manufacture the designed shape. - I want to reduce costs compared to conventional products, but I don't want to compromise on quality. - I want to consider the design shape, but I can't come up with any ideas. Our company has the following features. ≪Matsui Manufacturing's Features≫ 1. Know-how and Ideas We have numerous achievements with major manufacturers across various industries (medical, kitchen, semiconductor, air conditioning, gas equipment, etc.)! Based on the insights gained from each industry, we will propose part shapes and processing methods! 2. Abundant Methods We possess a wide range of processing technologies, enabling consistent production! (Hot forging, cutting processing, brazing, bending processing, assembly, leakage testing) 3. Speed Our sales department includes members who have experience in design and processing, allowing us to provide prompt and appropriate responses to your requests! For more details, please visit our company website!

Company：松井製作所
Price：Other

valve

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

ring Product List and Ranking from 41 Manufacturers, Suppliers and Companies

ring Manufacturer, Suppliers and Company Rankings

ring Product ranking