Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
301～315 item / All 589 items
Compatible with 18V impact drivers
【Feature Details】 - Compatible with 18V impact drivers - The tip's claws remove mortar attached to the P-con and capture the internal nut - By press-fitting a hex shaft into the hex hole of the socket part, it is resistant to twisting and breaking, and has high torque transmission efficiency - Designed for deep holes, allowing use even when the male thread protrudes significantly
Compatible with 18V impact drivers
【Feature Details】 - Compatible with 18V impact - Easy-to-insert trumpet shape - By press-fitting a hex shaft into the hex hole of the socket part, it is strong against twisting and breaking, and has high torque transmission efficiency.
Compatible with 18V impact drivers
【Feature Details】 - Compatible with 18V impact - Dual-purpose for Ivy foam tie and K-type foam tie - By press-fitting a hex shaft into the hex hole of the socket, it is strong against twisting and breaking, and has high torque transmission efficiency.
Lighting layout is flexible.
As long as there is a duct rail, you can freely arrange LED straight tubes with rail sockets.
Improved work environment for safety and waste reduction! Easy connection possible by simply pushing in without pulling the sleeve.
This product is a valve for medium and low pressure with a maximum operating pressure of 3.5 MPa. Thanks to its unique sealing method (PAT.), it reduces liquid leakage by approximately 99.7% compared to the CSPE type. Additionally, it achieves low pressure loss and high flow rates that are equal to or better than the CSPE type, allowing for easy connection by simply pushing it in without pulling the sleeve. 【Features】 ■ For medium and low pressure ■ Maximum operating pressure of 3.5 MPa ■ Reduces liquid leakage by approximately 99.7% compared to the CSPE type ■ Achieves low pressure loss and high flow rates that are equal to or better than the CSPE type ■ Easy connection by simply pushing it in without pulling the sleeve *For more details, please refer to the PDF document or feel free to contact us.
An extensive selection at the industry's highest level! We offer molded, cut, and 3D printed products tailored to your needs.
The "Socket for MEMS Microphones / Socket for Pressure Sensors" is a socket born from the know-how accumulated in the development of sensor sockets. It offers an extensive range of products at an industry-leading level. Additionally, we provide molded, machined, and 3D-printed items tailored to your needs, from prototypes to mass production, and we can manufacture from a quantity of just one. 【Features】 ■ Born from the know-how accumulated in the development of sensor sockets ■ Extensive product range at an industry-leading level ■ Molded, machined, and 3D-printed items available from prototypes to mass production ■ Capable of manufacturing from a quantity of one *For more details, please refer to the PDF document or feel free to contact us.
Tasks that require significant force, such as loosening rusted bolts, can be performed efficiently.
The EIGHT hexagonal rod wrenches are exported not only within Japan but to various regions around the world. With a cumulative production exceeding several hundred million, they continue to be loved in many countries, demonstrating a "quality" that is not apparent at first glance. A genuine hexagonal rod wrench with true quality backed by proven results. If you haven't used one yet, please experience the excellent quality for yourself. 【Features】 ○ Efficiently performs tasks that require significant force, such as loosening rusted bolts ○ A professional-grade product with unparalleled strength and durability For more details, please contact us or download the catalog.
SNCM+V Special Hard Chrome Plating
The EIGHT hexagonal rod wrenches are exported not only within Japan but to various regions around the world. With a cumulative production exceeding several hundred million, they continue to be loved in many countries, demonstrating a "quality" that is not apparent at first glance. A genuine hexagonal rod wrench with true quality that speaks for itself through its track record. If you haven't used one yet, please experience the excellent quality for yourself. 【Product Lineup】 ○41SB-* Set ○41SB-* Individual For more details, please contact us or download the catalog.
21XSB-*Single Item SNCM+V Special Hard Chrome Plating
The EIGHT hexagonal rod wrenches are exported not only within Japan but also to various regions around the world. With a cumulative production exceeding several hundred million, they continue to be loved in many countries, demonstrating a "quality" that is not apparent at first glance. A genuine hexagonal rod wrench with true quality that speaks for its achievements. If you haven't used one yet, please experience the excellent quality for yourself. 【Features】 ○ SNCM+V Special ○ Hard chrome plating For more details, please contact us or download the catalog.
Includes application guides, manufacturer comparison charts, pitch DIP sockets, and more!
The "ANDON Company Product Catalog" features image sensor sockets developed by Andon, a company highly regarded as a specialist in interconnection. The company offers sockets compatible with CCDs from various manufacturers, including Atmel, Dalsa, E2V, Fairchild, Hamamatsu Photonics, Kodak, Marconi, Micron, Motorola, National, NEC, Peripheral Imaging, Philips, Site, Sony, TI, and Toshiba. [Contents (excerpt)] ■ Application Guide ■ Manufacturer Comparison Table ■ Pitch DIP Sockets ■ Pitch SIP Sockets ■ Pitch PGA Sockets *For more details, please refer to the PDF document or feel free to contact us.
For converting mall taper sizes! Used in combination with the MTA type mall taper holder.
We would like to introduce the "MT. Drill Socket" that we handle. It is used in combination with the MTA type morse taper holder. It can convert the taper size of the morse taper shank. Please feel free to contact us when you need it. 【Features】 ■ For converting morse taper sizes ■ Made to order ■ Used in combination with the MTA type morse taper holder *For more details, please download the PDF or feel free to contact us.
The gear section rotates smoothly with 72 teeth!
The "DEG-3S" is a set of three flex extractor gear wrenches with special-shaped extractors for both the spanner and the socket parts. The socket part features a gear with 72 teeth (5-degree increment), allowing for smooth rotation. Additionally, it has a 180-degree swivel mechanism for excellent workability. 【Set Contents】 ■DEG-10: Size 10mm, Total Length 197mm, Weight 89g ■DEG-12: Size 12mm, Total Length 224mm, Weight 134g ■DEG-14: Size 14mm, Total Length 257mm, Weight 203g *For more details, please download the PDF or feel free to contact us.
The cutter can be replaced quickly and easily with one touch!
Our company offers the 'Separate Cutter (one-touch attachment method)' with excellent cutting performance, thanks to the adoption of 4-part carbide tips (SC) and high-grade bimetal (SB). The shank and center drill are interchangeable across all sizes, making them economical. Additionally, the removal of chips is smooth. [Applications] ■ Carbide: Drilling holes in stainless steel, iron, woodworking, plastic, etc. ■ Bimetal: Drilling holes in thin steel plates, woodworking, plastic, PVC, etc. *For more details, please download the PDF or feel free to contact us.
Bimetal cutter with an effective length of 25mm (Φ14 to Φ55) / 33mm (Φ60 and above)
Our company offers a 'bimetal cutter' with excellent cutting performance and long lifespan, thanks to the use of a thin blade type (M42) cutting edge. With a hexagonal shank specification (14mm to 35mm), it can be used with a cordless drill driver. Additionally, it is equipped with a center drill and a spring for chip removal, which helps reduce the workload of chip extraction. [Applications] ■ Drilling operations for steel plates (3.2mm or less), woodworking, PVC, plastics, etc. *For more details, please download the PDF or feel free to contact us.
Flex swivel design! 4-in-1 pocket gear wrench.
The "FRG-4S" is a pocket gear wrench that covers four sizes with one tool, balancing practicality and economy. The left-right switch lever allows for quick tightening and loosening operations. (Two positions: 10mm side and 14mm side) Additionally, the 72-tooth gear (with a 5-degree swing angle) rotates smoothly, providing excellent workability. 【Features】 ■ 5-degree swing angle (72-tooth gear) suitable for final tightening ■ Left-right switch lever ■ 180-degree swivel head *For more details, please download the PDF or feel free to contact us.
