Analysis Product List and Ranking from 173 Manufacturers, Suppliers and Companies

Raman spectroscopic analysis of ultra-thin Fe oxide films

It is possible to measure the material within the range of laser penetration! Analysis of ultra-thin oxide films on metal surfaces can be performed.

Our company conducts Raman spectroscopic analysis of ultra-thin Fe oxide films. It is possible to measure the substances within the range of laser penetration. Since lasers do not penetrate metals, we can analyze the ultra-thin oxide films on metal surfaces. In the related link, you can view the results of Raman spectroscopic analysis of thin oxide films on pure iron surfaces, along with evaluations of their effectiveness based on AES spectroscopic analysis and XRD results. 【Features】 ■ Qualitative analysis of the oxide film at the targeted area (analysis diameter: approximately 1μm) can be performed. ■ As the oxide film thickens, the peak intensity increases, allowing for relative comparisons of film thickness to be made in a short time. ■ Detection of ultra-thin films (approximately 10–50nm) below the detection limit of XRD is possible. *For more details, please refer to the related link or feel free to contact us.

Company：大同分析リサーチ
Price：Other

Contract measurement
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wide-area EBSD analysis of annealed steel materials

It is possible to evaluate the crystal structure and crystal orientation of a wide area of mm order with high precision.

By combining multiple views in software for EBSD analysis, it is possible to evaluate the crystal structure and crystal orientation of a wide area on the order of millimeters with high precision.

Company：大同分析リサーチ
Price：100,000 yen-500,000 yen

Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Extraction analysis of non-metallic interstitials and precipitates.

It is possible to extract and analyze non-metallic inclusions and precipitates.

Non-metallic inclusions and precipitates in steel have a significant impact on the various properties of steel. In extraction analysis, special solutions are used to extract and separate inclusions and precipitates from the steel material, and by combining this with various analytical methods, it is possible to evaluate the quantity, composition, size, and shape of the inclusions and precipitates.

Company：大同分析リサーチ
Price：Other

Contract Analysis
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis Case: Measurement of the Thermal Behavior of Calcium Oxalate Hydrate

It is possible to measure the thermal behavior of calcium oxalate monohydrate during dehydration and other processes.

TG-DTA is a technique that involves heating a sample and a reference material to measure the weight of the sample and the temperature difference between the sample and the reference material. It allows for the quantification of moisture, organic components, ash content, etc., based on weight changes, and evaluates decomposition, oxidation, and thermal stability during heating based on the temperature difference between the sample and the reference material. The thermal behavior of calcium oxalate hydrate during dehydration was measured using TG/DTA.

Company：大同分析リサーチ
Price：Other

Contract measurement
Analysis

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Separator

We have started the development of fuel cell cells (PEFC) and the processing of carbon separators for cells and stacks. Utilizing our expertise in precision machining and processing various materials, we will assist from prototype and research products to mass production. Aiming for the development of low-cost, high-efficiency cells and stacks, we contribute to the global environment and energy technology.

Company：ビット･テック
Price：Other

Other semiconductor manufacturing equipment
Other metal materials
Processing Contract
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Differential Scanning Calorimeter (DSC) [Setaram Instrumentation]

High-sensitivity measurement of thermal energy and weight changes is possible with a unique 3D sensor.

The CALVET PRO, a DSC designed with SETARAM's unique 3D sensor, achieves the operability of a general-purpose DSC and high-sensitivity measurements with a large sample container. By simply exchanging the sample container, it allows for high-pressure DSC measurements up to 50 MPa (600°C), and by adding a suspended balance (optional), it enables simultaneous high-sensitivity measurements of heat flow and weight changes as a TG/DSC. Additionally, the CALVET PRO DSC can be equipped with an optional robotic sample exchange mechanism (48 samples), enabling unmanned operation.

Company：DKSHマーケットエクスパンションサービスジャパンテクノロジー事業部門
Price：Other

Analytical Equipment and Devices
Other physicochemical equipment
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Adiabatic Runaway Reaction Calorimeter (ARC) [Setaram]

Desktop-sized adiabatic calorimeter (ARC)

This is an insulated adiabatic reaction calorimeter (ARC) that meets the needs of the fields of safety engineering and process engineering, achieving a compact design. It can obtain essential data for evaluating the safety of chemical processes, such as heat generation rate and the temperature at which runaway reactions begin. It is capable of measuring temperature and pressure increases at a wide range of tracking speeds.

Company：DKSHマーケットエクスパンションサービスジャパンテクノロジー事業部門
Price：Other

Analytical Equipment and Devices
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Separator "Fully Automatic Separator"

The perfect separator for automation and labor-saving!

The "Fully Automatic Separator" is a separator that simultaneously rotates the rotating body and scraper during filtration operation. The scraper not only plays a role in scraping off sludge during cleaning operations but also enhances filtration efficiency. Additionally, we offer a lineup tailored to various applications. Depending on the differences in the automatic cleaning unit, the "DLG type" is optimal for hard sludge or when maintenance is a priority, while the "DL/CL type" is best for soft sludge or when cost is a concern. 【Features】 ■ Ideal for automation and labor-saving ■ A lineup tailored to your application ■ Modifications to the main unit are possible *For more details, please contact us or download the catalog.

Company：中部セパレーター小牧本社、工場
Price：Other

centrifuge
Other Centrifugal separators
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring Instrument Online System Fresh Action-X

It is a "Product Master" management system to strictly adhere to regulations and ensure error-free label displays.

We support the management of the "product master" to ensure compliance with legal regulations such as changes in allergen labeling, mandatory nutritional information labeling, and clear distinctions between ingredients and additives, in order to achieve accurate labeling without mistakes. *The catalog PDF can be downloaded from the "Related Links" below.

Company：イシダ
Price：Other

Production Management System
Analysis

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Polytech Business Introduction

Contributing to society and people through plastics, rubber, etc.

Politec handles various materials including resins such as ABS, epoxy, and acrylic, as well as rubber like neoprene and EPT, and manufactures products such as multi-stage star wheels and special caps. We take pride in the numerous benefits you can experience from direct sales from our processing factory, including reduced distribution costs, shortened delivery times, and streamlined information channels. Please feel free to consult us regarding material selection, material information, intended use, pricing, delivery times, and more. 【Products Offered】 ■ Resins ■ Rubber ■ Ceramics ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ポリテック
Price：Other

Plastic utensils and containers
plastic
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Processing Production Example 2

Participate in plastic processing from the design stage! We can accommodate small lots and one-of-a-kind items!

Politec handles various materials including resins such as ABS, epoxy, and acrylic, as well as rubber like neoprene and EPT, and manufactures products such as multi-stage star wheels and special caps. We take pride in the numerous benefits you can experience from direct sales from our processing factory, including reduced distribution costs, shortened delivery times, and streamlined information pathways. Please feel free to consult us about material selection, material information, intended use, pricing, delivery times, and anything else. 【Products Offered】 ■ Resins ■ Rubber ■ Ceramics ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ポリテック
Price：Other

Plastic utensils and containers
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Processing Production Case 5

Participate in plastic processing from the design stage! We can accommodate small lots and one-of-a-kind items!

Politec handles various materials including resins such as ABS, epoxy, and acrylic, as well as rubber like neoprene and EPT, and manufactures products such as multi-stage star wheels and special caps. We take pride in the numerous benefits you can experience from direct sales from our processing factory, including reduced distribution costs, shortened delivery times, and streamlined information channels. Please feel free to consult us about material selection, material information, intended use, pricing, delivery times, and anything else. 【Products Offered】 ■ Resins ■ Rubber ■ Ceramics ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ポリテック
Price：Other

Plastic utensils and containers
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Processing Production Case 8

Participate in plastic processing from the design stage! We can accommodate small lots and one-of-a-kind items!

Politec handles various materials including resins such as ABS, epoxy, and acrylic, as well as rubber materials like neoprene and EPT, and manufactures products such as multi-stage star wheels and special caps. We take pride in offering numerous benefits such as reduced distribution costs, shortened delivery times, and streamlined information channels through direct sales from our processing factory. Please feel free to consult us regarding material selection, material information, intended use, pricing, delivery times, and any other inquiries. 【Products Offered】 ■ Resins ■ Rubber ■ Ceramics ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ポリテック
Price：Other

Plastic utensils and containers
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Processing Production Case 21

Participate in plastic processing from the design stage! We can accommodate small lots and one-of-a-kind items!

Polytech handles various materials including resins such as ABS, epoxy, and acrylic, as well as rubber like neoprene and EPT, and manufactures products such as multi-stage star wheels and special caps. We take pride in the numerous benefits you can experience from direct sales from our processing factory, including reduced distribution costs, shortened delivery times, and streamlined information pathways. Please feel free to consult us regarding material selection, material information, intended use, pricing, delivery times, and more. 【Products Offered】 ■ Resins ■ Rubber ■ Ceramics ■ Others *For more details, please download the PDF or feel free to contact us.

Company：ポリテック
Price：Other

Plastic utensils and containers
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thermal Analysis in the Pharmaceutical Industry: An Introductory Handbook

Introducing examples of the application of thermal analysis in the evaluation of pharmaceutical properties!

This guide presents application examples of MetraTRED related to the pharmaceutical industry. It is filled with information to support thermal analysis users. 【Some of the content included in the guide】 - Thermal analysis in the characterization of pharmaceuticals - Applications and their thermal analysis techniques - Measurement errors and measurement uncertainty - Method development - Calibration and adjustment of instruments - Overview of thermal analysis techniques - Excellent sample pans, accessories, and standard materials

Company：メトラー・トレド
Price：Other

Thermogravimetric analyzer
Differential thermal analysis equipment
Differential Scanning Calorimeter
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tools Useful for Biofuel Testing - Modular Calorimeter TAM

Evaluation of the generation process and characteristics of biofuels using a modular thermal analysis measurement device (TAM).

The calorimetry measurement device (TAM series) is an instrument known as a microcalorimeter that measures very small amounts of heat. By combining a thermostat with high isothermal performance with a calorimeter (calorimeter) suited to the sample and measurement method, it is possible to measure minute heat generated or consumed during physical processes or chemical reactions with sensitivity exceeding microwatts. It is a useful tool that can contribute to the research and development of biofuels and environmental improvement, allowing real-time calorimetry measurements while performing operations such as the addition, mixing, and titration of chemicals through module combinations. This document provides a detailed explanation of high-sensitivity calorimetry measurements of biofuels, which are difficult to observe with conventional differential scanning calorimeters (DSC), as well as real-time measurements of heat changes associated with chemical reactions. ◇ Quantification of wax based on the heat of solidification reactions ◇ Evaluation of the production rate of biofuels *Please download the document.

Company：TA Instruments Japan （TAInstruments）
Price：Other

Analytical Equipment and Devices
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis case: List of thermal analysis devices and measurement cases for bio research.

This is an introduction to analysis cases and related devices for bio research by analysis specialists. This time, we will cover three devices: ITC, TAM, and NanoDSC!

Measurement capabilities offered by TA Instruments ☆ Thermal analysis / Glass transition, crystallization, thermogravimetric analysis, curing reactions, expansion rate, thermal conductivity, shrinkage rate, effects of moisture, etc. ☆ Viscoelastic measurements (rheology) / Viscoelasticity, elastic modulus, viscosity, stress relaxation, creep, master curve, residual strain, molecular weight, molecular weight distribution, etc. ☆ Microcalorimetry / Intermolecular interactions, crystallization, amorphousness, aggregation/precipitation, dispersibility, solubility, compatibility, wettability, stability, adsorption, etc. ☆ Fatigue testing / Tensile strength, temperature dependence, viscoelasticity, elastic modulus, viscosity, stress relaxation, creep, master curve, residual strain, etc.

Company：TA Instruments Japan （TAInstruments）
Price：Other

Analytical Equipment and Devices
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnetic Levitation Gas Adsorption and Desorption Weight Analysis Device IsoSORP

Monitor the vapor adsorption and desorption behavior through weight change! Evaluation possible under high-pressure conditions up to 700 bar from vacuum.

This product adopts a patented "magnetic levitation balance" and allows for the evaluation of the vapor adsorption and desorption behavior of samples under various pressure conditions.

Company：TA Instruments Japan （TAInstruments）
Price：Other

Other weight measuring instruments
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Differential scanning calorimeter capable of simultaneous measurement of 3 samples.

Introducing the world's first DSC capable of simultaneous measurement of three samples!

TA Instruments continues to be the leading company in the world of DSC with innovative and exceptional technology. It provides reliable data and enhances workflow and productivity in laboratories. Material property analysis is essential at all stages of product design, manufacturing, processing, and application. Differential Scanning Calorimetry (DSC) is the most widely used thermal analysis instrument for evaluating the physical properties of a wide range of materials, including polymers, pharmaceuticals, food, biomaterials, organic compounds, inorganic compounds, and composites.

Company：TA Instruments Japan （TAInstruments）
Price：Other

Analytical Equipment and Devices
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LCD『WF43XTWAGDNG0』

Supports I2C interface and multi-touch functionality! A type without a touch panel is also available.

We would like to introduce the 4.3-inch LCD with IPS TFT PCAP, model 'WF43XTWAGDNG0', that we handle. It features an IPS panel with a wide viewing angle of 80 degrees (Typ.) in all directions—left, right, up, and down. The contrast ratio is 800:1 (Typ.) and the brightness is 500 nits (Typ.). The surface of the panel is treated with a glare finish, and the screen aspect ratio is 16:9. The projected capacitive touch panel incorporates the ILI2130 IC and supports I2C interface and multi-touch functionality. A version without a touch panel is also available. 【Features】 ■ Module size: 105.5 × 67.2 × 5.44 mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Power supply voltage (VCC) is 3.0V to 3.6V, with a typical value of 3.3V ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -30℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

Company：グローバル電子
Price：Other

LCD display
Other electronic parts
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comprehensive characterization for the development and manufacturing of safe and highly effective vaccines.

Efficient evaluation of potency, safety, and stability using light scattering detectors and LC-MS.

To quickly deliver safe and highly effective vaccines to the market, thorough characterization analysis is necessary. By using light scattering detectors, a wealth of information can be obtained regarding the vaccine's size, aggregation, stability, interactions, composition, and conformation. By combining MALS (Multi-Angle Light Scattering) and DLS (Dynamic Light Scattering), information about the conformation (shape and structure) of molecules can be derived from the ratio of Rh (hydrodynamic radius) to Rg (radius of gyration). Furthermore, by combining separation techniques such as SEC (Size Exclusion Chromatography) and FFF (Field Flow Fractionation), high-resolution size and molecular weight distribution measurements can be achieved. In LC-MS, peptide mapping allows for the confirmation of primary sequences and monitoring of post-translational modifications. By clicking [Submit], you are deemed to have agreed that Waters will use and process the information provided on this site in accordance with Waters' Terms of Use and Privacy Notice. Terms of Use and Privacy Notice www.waters.com/legalandprivacy

Company：日本ウォーターズ（米国本社 Waters Corporation）　
Price：Other

Other separation and analysis equipment
High Performance Liquid Chromatograph
Chromatography Consumables
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Generation LCD FULL IP65

<Overview> Dust and water have a very harmful effect on equipment. The full IP65 series is an ideal product for environments that are constantly exposed to dust and water, such as outdoor kiosks and pools, unlike conventional monitors. Full IP65 offers services tailored to your applications, including touch monitors and IP65 dedicated connectors. ■ Supports sizes from 6.5" to 20.1". ★ For more details, please request our materials.

Company：ディサイン
Price：Other

Other image-related equipment
Analysis

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"J106S・J116S" (EP) low linear expansion low shrinkage composite material

High precision × no machining × mass production compatible. Leave the resin processing of precision parts to us.

The "Epoclustar J106S/J116S" is an epoxy resin-based composite material (plastic) developed by our company using a unique kneading technology. It can mass-produce high-precision parts without the need for post-processing, and is currently widely adopted in mechanical components for imaging equipment and industrial machinery. 【Features】 ■ Achieve precision parts like those made by cutting processing through injection molding! With a molding shrinkage rate of 0.03% (J106S) and a linear expansion coefficient of 9ppm (J106S), we have realized precision molding at the micron level. ■ Wide design flexibility leveraging the properties of the resin! Utilizing the characteristics of thermosetting resin, complex designs such as thin walls without material loss and varying wall thicknesses are possible. ■ Many applications in fields requiring chemical resistance! It is used in various fields where chemical resistance is required, such as in the liquid-contact parts of inkjet printers. ■ Customize resin materials according to required properties! In addition to high precision, various functional enhancements such as thermal conductivity and low water absorption are possible. For more details, please refer to the catalog, and feel free to contact us. *This product is provided as molded products processed by our company. Please note that we do not sell the material alone.

Company：クラスターテクノロジー本社
Price：Other

plastic
Engineering Plastics
Composite Materials
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoxy resin insulator

ES Gaiter Series "ES-6(A)" and many other lineups!

Our company offers a variety of epoxy resin insulators, including the ES insulator series, EM insulator series, and small insulators. You can choose from a wide range of screw sizes to suit your needs. 【Materials】 ○ Brass ○ Iron For more details, please contact us or download the catalog.

Company：クラスターテクノロジー本社
Price：Other

Composite Materials
plastic
Engineering Plastics
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"J101" (EP) High Sliding Conductive Composite Material

The molding shrinkage is extremely small! A composite material that allows injection molding under stable conditions.

"Epoclustar J101" is an organic-inorganic micro-composite that leverages the synergistic effects of layered inorganic compounds and organic materials. It is a thermosetting injection molding material modified with epoxy resin, possessing excellent moldability, mechanical properties, and thermal characteristics, and it has dimensional stability that is unparalleled among existing resins. It is widely used for ultra-precision molded products that require micron-order accuracy. 【Features】 ○ Excellent sliding properties ○ Possibility of weight reduction (about half that of aluminum, lighter than magnesium alloys) ○ Excellent creep resistance ○ High strength and high elasticity ○ Superior surface smoothness For more details, please contact us or download the catalog.

Company：クラスターテクノロジー本社
Price：Other

Composite Materials
Engineering Plastics
plastic
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"CPS38" (PPS) Low linear expansion and low molding shrinkage composite material

Low thermal expansion and low molding shrinkage for excellent surface accuracy! High-precision new grade PPS.

"EpoclusT T CPS38" is a composite material with good chemical resistance for thermoplastic ultra-precision molding. It achieves low anisotropy, low thermal expansion, and low molding shrinkage. With good mold transferability and minimal flatness, it is ideal for high-precision parts. Additionally, it possesses the excellent mechanical properties of PPS. 【Features】 ○ High precision ○ Good chemical resistance ○ Customizable according to application For more details, please contact us or download the catalog.

Company：クラスターテクノロジー本社
Price：Other

Composite Materials
plastic
Engineering Plastics
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"J101" (EP) High Sliding Conductive Composite Material

High mobility × high precision × design flexibility; leave the resinization of precision parts to us.

"Epocluseter J101" is a conductive epoxy resin composite material (plastic) developed by our company using a unique kneading technology based on epoxy resin. We can provide customized proposals according to the required characteristics. [Features] ■ High sliding properties and wear resistance By incorporating carbon fiber, we have achieved a low friction coefficient and high wear resistance. ■ Excellent isotropic dimensional accuracy With minimal molding shrinkage and reduced anisotropy, we can produce precision parts under stable conditions. ■ Wide design flexibility utilizing the properties of the resin Taking advantage of the characteristics of thermosetting resin, complex designs such as thin walls without material loss and variable thickness are possible. ■ Customization of resin materials according to required characteristics Not only high precision but also various functional enhancements such as thermal conductivity and low water absorption are possible. For more details, please refer to the catalog, and feel free to contact us. *This product will be provided as molded products processed by our company. Please note that we do not sell the material alone.

Company：クラスターテクノロジー本社
Price：Other

Composite Materials
Engineering Plastics
plastic
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

3M Print Wrap Film 'IJ280'

Reliable weather resistance guarantee! Introducing products optimized for vehicle wrapping.

The IJ280 is a 3M print wrap film that improves surface conformity without heating and demonstrates even better performance on three-dimensional surfaces. By adopting a new adhesive that allows air to escape in various directions, smooth squeegeeing is achieved. Optimized initial tack and glass beads on the adhesive surface make alignment smoother. 【Features】 ■ Improved surface conformity without heating ■ High air release capability due to new adhesive shape ■ Excellent alignment properties ■ Compatible with the 3M MCS warranty program *For more details, please refer to the PDF document or feel free to contact us.

Company：デコラティブシステム
Price：Other

others
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat flux type single furnace DSC 4000

Introducing a compact, simple, and robust design! Here is a high-sensitivity heat flux DSC with excellent versatility.

The "Heat Flux Type Single Furnace DSC 4000" is a compact and highly versatile high-sensitivity heat flux DSC capable of a wide range of applications from research to routine analysis. With its small, simple, and robust design, it meets various needs, from quality management such as QA/QC to improving work efficiency and providing reliable analysis essential for routine analysis. It is equipped with a mass flow controller that ensures stable gas supply. 【Features】 ■ Compact design that saves space ■ Excellent operability and reliability ■ Stable baseline ■ Built-in mass flow controller for stable gas supply *For more details, please refer to the PDF document or feel free to contact us.

Company：PerkinElmer Japan
Price：Other

Other measurement, recording and measuring instruments
others
Analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSC9

DSC 9 supports high-temperature measurements up to 750°C and reproduces reliable DSC measurements through direct temperature control.

Wide measurement temperature range: -180℃ to 750℃ Direct temperature control sensor User-friendly touch screen Compact design Robust and long-lasting furnace High cooling capacity (Max 100℃/min) Quality standards compliant with ASTM specifications Automatic dual-line gas switching (built-in MFC)

Company：PerkinElmer Japan
Price：Other

plastic
Analysis

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Analysis Product List and Ranking from 173 Manufacturers, Suppliers and Companies | IPROS GMS

Analysis Manufacturer, Suppliers and Company Rankings

Analysis Product ranking