Baked paint Product List and Ranking from 47 Manufacturers, Suppliers and Companies

Management of thinner for metal baking paint.

Do you think that adding more thinner makes it easier to paint? Here’s an explanation of the reasons that can lead to poor quality.

If too much thinner is added to metal baked paint, the resin components in the paint become diluted, leading to insufficient film thickness and reduced durability. Even if it feels easier to apply, there is a possibility that the performance of the paint film is compromised. Additionally, making the paint flow more easily can lead to drips, hindering the formation of a uniform paint film. Furthermore, if the volatilization conditions are not suitable, it can result in pinholes, uneven gloss, and paint peeling. Adhering to the dilution ratio specified by the paint manufacturer is fundamental to ensuring quality stability.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

前処理不足が招く密着不良！塗装剥がれの原因と真相

焼付温度を見直しても改善しない塗装剥がれ。見落とされやすい前工程との関係と対策を解説します。

【発生原因】自動車部品の金属塗装において、塗装剥がれは歩留まりを悪化させる致命的な不良です。多くの場合、現場では塗料の選定ミスや乾燥工程での熱不足が疑われます。【真相】剥がれの約8割は、塗料ではなく「前処理工程」の異常に起因します。脱脂不足で金属表面に微細な加工油が残ると、塗膜と素材間に膜ができ密着不良を起こします。これは後工程での錆再発などの二次不良も誘発する要因です。【改善策】対策の第1歩は、脱脂液の濃度と温度の徹底管理です。適正なリン酸亜鉛皮膜処理を施すことで密着性は劇的に向上します。具体的な前処理の数値管理シートを含む改善マニュアルは、下記よりダウンロードして現場でご活用ください。【まとめ】塗装剥がれは塗料条件ではなく、前処理における脱脂・皮膜処理の最適化で根本から防ぐことができます。永和工芸株式会社では金属焼付塗装、粉体塗装、リン酸亜鉛皮膜処理など前処理から塗装までを一貫して承っております。

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The temperature difference inside the summer baking furnace disturbs the film thickness.

In the summer when the outside temperature rises, temperature variations inside the furnace lead to issues with film thickness. This explains the causes and management methods.

During the summer, isn't there an increase in the variation of film thickness? The cause may be the temperature differences inside the curing oven. On days when the outside temperature is 35 degrees, the temperature difference inside the oven can expand to twice the normal range. ────────────── ■ Cause of Occurrence In summer, the high outside temperature can easily create a temperature difference between the entrance and the back of the oven. When the temperature is not uniform, the curing speed varies by area, leading to uneven film thickness. ■ The Truth It is not uncommon for temperature management inside the oven, which was not an issue in winter, to become unstable only in summer. The position of the ventilation openings that draw in outside air also affects this. ■ Improvement Measures Measure the temperature at multiple locations inside the oven and revise the settings specifically for summer. Adjust the timing of ventilation to keep the temperature difference inside the oven within plus or minus 5 degrees. Please utilize the materials for reviewing the curing conditions in summer.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the reason for the uncertainty in the painting delivery schedule? Waiting for the batch in the curing oven.

Although the quantity is small, the delivery time is long. The cause lies in the batch unit of the baking furnace and the setup for color changes.

Although the quantity is small, the delivery time for painting is unpredictable. The reason is not the processing time, but the waiting time for the furnace and color change. ────────────── ■Cause of Occurrence Baked painting operates on a batch basis in the furnace, so even one piece uses one batch. Additionally, color changes require cleaning setup for the booth and piping. ■The Truth The setup for color changes takes anywhere from several tens of minutes to several hours each time. As a result, production plans prioritize consolidating the same color, and small quantities of different colors are postponed. The time for drying and cooling is also fixed in the process, so compression is not possible. ■Improvement Measures Consolidate colors and quantities when placing orders to reduce the number of color changes. Pre-register standard colors and share the standard lead times for each color. Please utilize the materials for considering lead time reduction.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What causes paint to string? Viscosity and solvent balance.

Paint stretches and adheres like threads from the gun. The stringing is stopped by the viscosity and the evaporation rate of the solvent.

The moment it is blown, the paint stretches like a thread and adheres to the product. It is not a malfunction of the gun, but rather the condition of the paint. ────────────── ■Cause of Occurrence If the viscosity is too high, the paint does not become mist and is stretched into threads. If the solvent evaporates too quickly, it can solidify in mid-air and create threads. ■Truth A difference of just 5 degrees in temperature visibly changes the viscosity. Using paint that is cold in the morning without adjustment increases the viscosity. Continuing to use fast-drying thinner with a summer mindset can have the opposite effect in autumn and beyond. ■Improvement Measures Before use, adjust the paint temperature to around 20 degrees and check the viscosity with a viscometer each time. Use standard and slow-drying thinners according to the temperature range. Please utilize the materials for viscosity management and thinner selection.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What causes parts to warp when heated? Measures against thermal deformation of thin plates.

When I took it out of the oven, the plate was warped. I will explain how to suppress thermal deformation caused by the difference in heating and cooling speeds.

After taking it out of the furnace, the flat plate was warped. This is not a painting issue, but a problem with how the heat was applied. ────────────── ■Cause of Occurrence Metals expand when heated and contract when cooled. If there is a temperature difference on the front and back or between different areas of the plate, the difference in contraction leads to warping. ■Truth Thin plates with a thickness of 1.0mm or less can warp even with a temperature difference of 10 degrees. Residual stress introduced during pressing or welding is released all at once when heated. If there is a temperature difference between the entrance and exit sides of the furnace, the difference between areas is amplified. ■Improvement Measures Gradually increase the temperature and cool down slowly to avoid rapid cooling. For parts that are prone to warping, bake them while restrained with reinforcing jigs. Please utilize the materials summarizing the baking conditions for thin plate components.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the cause of only the first batch of products in the morning being defective? Furnace startup.

Only a few defects occur right after the start of operations. I will explain the management methods until the furnace and booth reach a steady state.

Only a few pieces right after starting production consistently have defects. The operators are the same. The difference is the temperature of the equipment. ────────────── ■ Cause of Occurrence Both the curing furnace and the booth are not stable immediately after startup from a stop. Even if the displayed temperature reaches the set point, the furnace walls and jigs remain cold. ■ Truth When the furnace walls are cold, they draw heat from the product, lowering the actual curing temperature. Until the booth's air conditioning stabilizes, the humidity is also high, making defects more likely. The recorded temperature reflects the set value, so the cause remains unidentified and repeats. ■ Improvement Measures Decide on a pre-heating time before starting production and preheat each jig before running them through. For the first few pieces, only run waste boards or jigs, and once conditions stabilize, proceed with the main flow. Please utilize the standardization materials for the startup procedure.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

試作1個を断られる原因とは？小ロットの採算構造

1個だけ塗ってほしいのに受けてもらえない。断られる理由と受けられる会社の条件を解説します。

試作の1個だけ塗ってほしい。それが断られる。理由は「面倒だから」ではありません。 ────────────── ■発生原因焼付塗装は炉のバッチ単位で動きます。 1個でも1バッチを占有し、前処理槽と色替え段取りも同じだけかかります。 ■真相量産ラインを持つ工場ほど、1個の段取り費を吸収できません。断られるのは能力不足ではなく、原価計算の型が合わないためです。多品種少量型の工場なら、段取り費を単価に織り込んで受けられます。 ■改善策試作を受ける会社は、そのまま量産の第二調達先にもなります。試作から量産まで条件を引き継げれば、立ち上げの手戻りが減ります。小ロット対応の条件をまとめた資料をご活用ください。

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the reason for the fear of dependence on a single company? Secondary suppliers.

I will explain the risks of having only one supplier for painting and the steps to smoothly establish a second supplier.

There is only one outsourcing company for painting. When production stops, there is no alternative, and this cannot be safeguarded by inventory. ────────────── ■ Cause of Occurrence Painting is an equipment-intensive industry, and if the furnace stops, there is no alternative. Production will halt due to disasters, equipment failures, or restrictions on raw material supply. ■ The Truth During the solvent shortage in spring 2026, some factories experienced delays in painting due to shipment restrictions. It takes several weeks to establish a new outsourcing partner due to color matching and setting conditions. If you start looking for alternatives after production has stopped, it will be too late. ■ Improvement Measures Divert about 10% of the quantity to a secondary supplier while maintaining conditions. Place regular small orders to keep color samples and process conditions intact. Please utilize the materials summarizing the procedures for establishing a secondary supplier.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the cause of the lack of thinner? The situation in the Middle East and the shortage of solvents.

The desired amount of thinner has not arrived. I will explain the chain from crude oil to solvents and the measures that can be taken on-site.

The thinner is not arriving in the desired quantity. Prices have also risen. The cause lies not at the site, but upstream in the raw materials. ────────────── ■ Cause of Occurrence The raw material for thinner is naphtha, which is derived from crude oil. Due to the worsening situation in the Middle East, crude oil prices have surged, leading to a reduction in the supply of naphtha. ■ Truth Since spring 2026, major paint manufacturers have raised thinner prices by 50 to 75 percent. At the same time, order restrictions were imposed, with some periods limiting orders to one can per company. Although distribution has been gradually returning since July, prices have not reverted to their original levels. ■ Improvement Measures We will review the dilution ratio for each process and quantify the necessary amounts. A partial switch to powder coating, which does not use solvents, is also a realistic option. Please utilize the materials for considering the switch to powder coating.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the reason for not being able to use the same paint as before? Consolidation of brands.

The specified paint has been discontinued, and a successor product has been recommended. I will explain the procedure to avoid color differences during the transition.

When I specified the same paint as before, I was told it was no longer being produced. The number of brands is decreasing. ────────────── ■Cause of Occurrence Since the supply disruption in spring 2026, paint manufacturers have been narrowing down the varieties they produce. Brands that are not bestsellers are being consolidated or discontinued, and a switch to successor products is being requested. ■Truth Even if the successor product has the same color number, the resin and pigment formulations have changed. Due to differences in gloss and hiding power, if applied directly, there will be a color difference compared to the old product. Some brands have extended their delivery time from the usual 1-2 days to 1-2 weeks. ■Improvement Measures For the approved drawings, we will specify the color number and standards instead of the brand name. During the transition, we will confirm color differences and adhesion using test paint boards before entering mass production. Eiwa Kogei is responding to the selection of alternative brands and the submission of test paint boards.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What causes only thick parts to be sticky? Temperature of the material and curing time.

Thin parts are fine, but thick parts remain sticky even after baking. The cause is not the furnace temperature, but how the parts themselves heat up.

Even though they were baked in the same furnace, only the thick parts have a sticky surface. The furnace thermometer shows the usual numbers. 【First, please look here】 □ Only the thick parts and castings are sticky 　→ The baking time has ended before the parts have fully warmed up □ Only the back side or the inside of the parts are sticky 　→ They are not exposed to hot air and the temperature has not risen □ Only the parts close to the entrance of the furnace are sticky 　→ There are temperature variations in different locations within the furnace 【Why does this happen】 The curing of the paint is determined by the surface temperature of the parts, not the temperature of the furnace. Thick parts take longer to warm up because they retain heat. 【Countermeasures you can take starting today】 1. Attach temperature recorders to the parts to measure the actual temperature 2. For thick parts, extend the baking time or bake them in a separate batch 3. Record the temperature for each location within the furnace 【Free materials】 You can download a guide summarizing how to identify and address painting troubles for free from the related catalog on this page. Eiwa Kogei handles baking paint for all types of metals, including iron, aluminum, and zinc die casting.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is the cause of the increase in defects when reducing thinner? Management of dilution ratio.

Since the price increase of thinner in spring 2026, prices have remained high. This explains the defects that arise from saving on thinner and how to maintain the dilution ratio.

Since the thinner is expensive, I am diluting it a bit more conservatively. Also, have you noticed an increase in uneven skin or pinholes? 【What is happening now】 In spring 2026, major paint manufacturers raised thinner prices by more than 50% and up to 75%. Supply has stabilized, but prices remain high. 【First, please look here】 □ The surface is uneven like an orange peel 　→ The viscosity is high, and the paint is not spreading evenly □ There are more small holes 　→ The solvent has not completely evaporated from the thickly applied paint 【Countermeasures you can take starting today】 1. Measure the dilution ratio by weight and record it each time 2. Measure the time with a viscosity cup and adjust if it deviates from the standard 3. Save costs not by reducing thinner but by reviewing the amount of gun cleaning 【Free materials】 You can download a document summarizing the scope of Eiwa Kogei's baked coating services for free from the related catalog on this page.

Company：永和工芸
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrocoating, cationic electrocoating / melamine baked coating

This is a method of uniformly applying paint to the coated film by passing a high-voltage current.

Hanakō Industries also accepts inquiries about electro-deposition coating (cationic electro-deposition coating/melamine baked coating). Electro-deposition coating is the same painting method used for automobiles. It is referred to as Electro-Deposition Coating (commonly known as ED), and unlike general painting, a special method is used for film formation. Special paint is evenly suspended in water maintained at a constant temperature (27°C to 29°C), and by passing a high-voltage current, the paint (+) is uniformly adhered to the workpiece (-). The cationic electro-deposition coating offered by Hanakō Industries is a high-quality coating with excellent rust resistance. For more details, please contact us or refer to our catalog.

Company：花岡産業
Price：Other

Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Technical Introduction: Powder Coating

The coating is hard for baking, has good adhesion, and excels in light resistance and abrasion resistance. ISO 9001 and ISO 14001 certification obtained.

Baking paint is a painting method that hardens the paint by applying heat. Since the process from pre-drying to final baking takes about one hour, it allows for flexibility in delivery times. Two-component polyurethane resin paint, which dries at room temperature, takes more than 5-6 hours to touch dry and 4-5 days to fully cure. Baking paint offers excellent corrosion resistance even at thicknesses of about 10-30 microns. Our skilled workers ensure that the paint is applied evenly with a spray gun to achieve uniform film thickness. Our company has obtained ISO 9001 (Quality) and ISO 14001 (Environment) certifications, allowing us to perform a consistent production process in-house, from various plating treatments, zinc phosphate and chromate treatments, to electrophoretic painting, baking paint, and resin painting. This enables comprehensive quality control and centralized management of delivery times. You can trust us with any surface treatment needs. For more details, please contact us or refer to our catalog.

Company：ワカヤマ
Price：Other

Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Limited Company Time Paint - Painting Case 1

For metal baked coatings, from small parts to large enclosures, please leave it to Time Paint.

Time Paint Co., Ltd. is confident that we can contribute to various fields through our state-of-the-art equipment and extensive experience and knowledge. We accept orders for electronic components, architectural hardware, large enclosures, and more with short lead times. Additionally, we can respond quickly to requests for silk printing and parts processing, among other services, under a consistent cooperative framework. 【Features】 ○ Degreasing process in pre-treatment conducted in-house → Always able to respond to urgent requests ○ Separate installation of a small drying oven → Work can proceed independently from the normal process, allowing for same-day responses ○ The drying oven allows temperature settings from 50°C to 200°C in 1°C increments → Capable of meeting more stringent requirements For more details, please contact us or download the catalog.

Company：タイムペイント
Price：Other

Surface treatment contract service
Processing Contract
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hanabishi Painting Technology Co., Ltd. Business Introduction

We will continue to pursue a great future along with the pursuit of technology.

Hanabishi Coating Technology Corporation is a company that develops various businesses, including painting for buildings, steel structures, and bridges. We have established several divisions, including the "Head Office Construction Division," which conducts various baked coatings and silk printing, as well as the "Head Office Construction Technology Division" and the "Shintomi Branch Construction Division." For anything related to painting, from residential and plant projects to industrial product consultations, please feel free to leave it to us. 【Business Activities】 ■ Building, steel structure, and bridge painting ■ Electrostatic powder coating ■ Various metal baked coatings ■ Various plastic coatings ■ Sandblasting and shot blasting, etc. *For more details, please refer to our catalog or feel free to contact us.

Company：花菱塗装技研工業
Price：Other

Other contract services
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Evolving Painting Company Tokou Co., Ltd.

Through painting, technology, people, internal systems, and the local community all evolve together.

Our company has been solving various challenges related to painting for our customers, based on advanced technology and knowledge gained from our extensive experience. We are capable of a wide range of painting services, including painting on metal products, woodworking products, and various other materials, as well as special coatings and on-site painting. We have a variety of facilities, including a painting line that supports mass production, large fixed furnaces that can accommodate products of various sizes, and clean booths for high-quality painting, allowing us to meet our customers' diverse needs. Please feel free to contact us when you need our services. 【Features】 ■ Capability gained from advanced technology and extensive experience ■ Well-equipped facilities and a wide-ranging production system ■ Pursuit of customer satisfaction through human resources ■ Thorough management system by the organization *For more details, please refer to the PDF document or feel free to contact us.

Company：トコウ
Price：Other

Calibration and repair
Surface treatment contract service
Other contract services
Baked paint

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For those troubled with painting] Short delivery times and small lot support! General painting including baked coatings.

[Nationwide service available!] Tokou Co., Ltd. conducts powder coating, woodworking coating, special coatings, and general painting in Iruma City, Saitama Prefecture.

Our company has been solving various challenges related to painting for our customers, based on advanced technology and knowledge gained from our extensive experience cultivated over the years. We are capable of a wide range of painting applications, including metal products, woodworking products, special coatings, and on-site painting. We have a variety of facilities, including a painting line that accommodates mass production, large fixed furnaces that can handle products of various sizes, and clean booths for high-quality painting, allowing us to meet our customers' diverse needs. Please feel free to contact us when you need our services. 【Features】 ■ Capability derived from advanced technology and extensive experience ■ Well-equipped facilities and a wide-ranging production system ■ Pursuit of customer satisfaction through human resources ■ Thorough management system by the organization *For more details, please refer to the PDF document or feel free to contact us.

Company：トコウ
Price：Other

Calibration and repair
Surface treatment contract service
Other contract services
Baked paint

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Achievements/Case Studies] Special Coating: Bronze Color

This is an introduction to examples and achievements of products made from aluminum castings, finished in a stylish manner!

Special Coating: We will introduce our achievements and examples in bronze color. We used acrylic (baked) paint. The material is aluminum casting, and it has been finished beautifully. For special coatings (picture coating, wood grain coating), baked coatings, powder coatings, woodworking coatings, and more, please consult Toko for any painting needs. 【Achievements and Examples】 ■ Delivery No.: 005 ■ Material: Aluminum casting ■ Paint used: Acrylic (baked) ■ Product: Fence ■ Publication date: August 20, 2015 *For more details, please refer to the PDF document or feel free to contact us.

Company：トコウ
Price：Other

paint
Surface treatment contract service
Processing Contract
Baked paint

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The Power of Painting: Turning a Nostalgic Locker into Gold

Enjoy decoration with repainting - Painting with 'glitter' requires skill and experience!

At Tokou's repainting, we not only revive items through repainting but also add new value by incorporating "decorative elements" as one of our strengths. We received a repainting request for a locker that holds sentimental value. The client's request was for "glitter gold," and painting with "glitter" requires skill and experience. Our craftsmen went through trial and error to bring it to fruition. Thank you for your request. *For more details, please refer to the PDF document or feel free to contact us.

Company：トコウ
Price：Other

paint
Surface treatment contract service
Processing Contract
Baked paint

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shinwa Coating Co., Ltd. - Business Activities

From small items to large ones, you can count on us for powder coating!

At Shinwa Coating Co., Ltd., we perform special and general metal powder coating as well as silk screen printing. Our headquarters is equipped with pre-treatment facilities and has painting lines for sections 1, 2, and 3, catering to small lot needs for frames, components, and more, allowing us to respond broadly to various demands. For metal powder coating, please leave it to us. 【Product Line】 ■ Special and general metal powder coating ■ Silk screen printing *For more details, please download the PDF or feel free to contact us.

Company：伸和コーティング
Price：Other

Other painting machines
Processing Contract
Contract manufacturing
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TOMOE Corporation Business Introduction

We provide products that satisfy our customers with advanced painting technology!

TOMOE Co., Ltd. is a painting company primarily engaged in metal baking operations, founded in 1955. Inspections and measurements are conducted using calibrated measuring instruments, and the data is processed and managed using computers and other devices. Based on the quality manual, we ensure stable quality by managing each process from receiving to pre-treatment, painting, inspection, and shipping. 【Business Activities】 ■ Metal baking painting ■ General pre-treatment processing ■ Construction painting work *For more details, please download the PDF or feel free to contact us.

Company：TOMOE 本社　
Price：Other

Painting Machine
Processing Contract
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal baked coating panel "Mewall"

Rich material compatibility! Excellent weather resistance and rust prevention significantly reduce maintenance costs!

"Mu-Wall" is a metal baked coating panel that embodies harmonious beauty, consideration for the environment, and quality that withstands various conditions. Starting with the fluororesin-coated panel "Mu-Wall F," the lineup includes the inorganic coating panel "Mu-Wall CX," the heavy-duty anti-corrosion coating panel "Mu-Wall PX," and the "Mu-Wall Rust Style," which possesses high weather resistance and pollution resistance. It features a unique post-coat that allows for free design and a rich variety of colors, faithfully reproducing an infinitely expanding design image. 【Features】 ■ A coating design suitable for exterior walls that remains unaffected by harsh climate changes. ■ A unique post-coat that allows for free design and a rich variety of colors, faithfully reproducing an infinitely expanding design image. ■ Excellent weather resistance and anti-corrosion properties significantly reduce maintenance costs. ■ Compatibility with a wide range of materials. ■ Environmental consideration achieved through phosphorus and chromium-free chemical treatment. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミヤコー
Price：Other

others
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Handrail and Striped Plate Melamine Baked Coating

Please leave your requests for baked painting, powder coating, and air-dry painting to us!

We would like to introduce the "handrails and checker plates" developed by Fujidenko. This product was ordered by a customer in Sakai City. The handrails, checker plates, and H-beams are products used within the factory, and the specified color is yellow melamine baked paint. Yellow tends to show unevenness and is difficult to stop the color, and the shade can easily change depending on the film thickness, so we stabilize the quality by applying thin layers during painting. The finished product has met the customer's satisfaction. [Case Study] ■ Processed Products: Handrails and Checker Plates ■ Melamine Baked Paint *For more details, please refer to the PDF document or feel free to contact us.

Company：富士電装
Price：Other

Painting Machine
Other painting machines
Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Complete Steel Material Conveyor - Powder Coating

If you're struggling with tight deadlines, we can help! Introducing our conveyor powder coating service.

We would like to introduce the "complete set of steel conveyors" developed by Fujidenko. This product was ordered by a customer in Sakai City. It is a complete set of conveyors weighing over 6 tons in total, with a request for a light green baked paint finish. The set includes various small components, steps as shown in the photo, and angles over 5 meters long, which were baked in three separate batches. Since the color was a light green, the primer was painted in a gray close to white. 【Case Study】 ■ Processed Product: Complete set of steel conveyors ■ Baked Paint Finish *For more details, please refer to the PDF document or feel free to contact us.

Company：富士電装
Price：Other

Painting Machine
Other painting machines
Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Duct Frame - Black Powder Coating

After baking, it has a smooth and beautiful finish! Example of black baked coating processing.

Introducing the "duct frame" developed by Fujidenzo. This product was requested by a customer in Higashi-Osaka City. The material is ZAM steel plate, and the color is black baked paint. We used a paint called Rockhold (black). A key point to note during painting is that the surface is smooth, making it difficult for the fabric and paint to adhere. Therefore, it is important to thoroughly sand (polish with paper) before painting. The painting is done only on the inner surface and edges. After baking, it achieved a smooth and beautiful finish. [Case Study] ■ Processed Product: Duct Frame ■ Black Baked Paint *For more details, please refer to the PDF document or feel free to contact us.

Company：富士電装
Price：Other

Painting Machine
Other painting machines
Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Processing Example] Powder Coating of Steel Covers for a Complete Slat Conveyor System

Free estimates, please consult us first! For painting requests, leave it to our company!

Introducing the "Steel Cover" developed by Fujidenzo. This product was ordered by a customer in Sakai City. It was a request for powder coating of a complete slat conveyor system. The color is a bright orange, and we used melamine paint for the work. For orders like this one, involving painting of complete systems such as robots and conveyors used in factories, our vertical drying oven exceeds 6 meters, allowing us to finish with a single bake. [Case Study] ■ Processed Product: Complete Slat Conveyor System (Steel Cover) ■ Work done with melamine paint *For more details, please refer to the PDF document or feel free to contact us.

Company：富士電装
Price：Other

Painting Machine
Other painting machines
Surface treatment contract service
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment and painting services

Paintable from the size of the screw head to architectural exterior panels!

Our company focuses on "die-cast materials, metal materials, and resin materials," and we conduct a painting business that involves surface treatment of materials and electrostatic painting. Regarding material manufacturing, we design molds based on customer blueprints and carry out prototype mass production at our partner companies. Additionally, the range of painted products we can handle varies from "screw head sizes" to "building exterior products sized 2M x 3M." [Introduction to Painted Products] ■ Exterior large items ■ Automotive-related items ■ Building material products *For more details, please download the PDF or feel free to contact us.

Company：タテイシテクノ
Price：Other

Painting Machine
Processing Contract
Baked paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Baked paint Product List and Ranking from 47 Manufacturers, Suppliers and Companies | IPROS GMS

Baked paint Manufacturer, Suppliers and Company Rankings

Baked paint Product ranking