We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Construction method.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Construction method Product List and Ranking from 45 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.

  1. 三和グランド Tokyo//Building materials, supplies and fixtures
  2. シャープ化学工業 大阪本社 Osaka//Chemical
  3. 小泉製麻 神戸本社 Hyogo//Manufacturing and processing contract
  4. 4 長野大信工業 Nagano//Manufacturing and processing contract
  5. 5 第一カッター興業 本社 Kanagawa//others
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.

  1. No paint leaks from the gaps in the protective covering! Edge painting protective method LCL method. シャープ化学工業 大阪本社
  2. Attention those struggling with ivy clinging to fences! Introducing 'Bariosu Net'! 小泉製麻 神戸本社
  3. Construction method "Cage mat multi-layer stacking type" 長野大信工業
  4. 4 Permeable blast furnace slag paving material "Color Sand" 三和グランド
  5. 4 Land Stitch Anchor for securing air conditioning outdoor units. キャムズ 本店/統括センター

Construction method Product List

331～345 item / All 351 items

Displayed results
[Construction Case] Middle School (Gymnasium): Floor Settlement Correction Work

[Construction Case] Middle School (Gymnasium): Floor Settlement Correction Work

Short-term repairs to the middle school gymnasium! Injecting urethane resin to ensure there is no strain on the concrete floor.

We would like to introduce a case of "floor sinking correction work" that we conducted. Due to the Kumamoto earthquake, a gymnasium at a junior high school in Kumamoto Prefecture sank. Because it could be corrected in a short time, we received a request for construction. The area of the sinking correction was approximately 897m2. The maximum sinking amount was 53mm, and the planned correction value was within -10mm. The construction period was 7 days. 【Case Overview】 ■ Area of sinking correction: Approximately 897m2 ■ Maximum sinking amount: 53mm ■ Planned correction value: Within -10mm ■ Area: Junior high school gymnasium, Kikuchi District, Kumamoto Prefecture ■ Construction period: 7 days *For more details about the case, you can view them through the related links. For more information, please refer to the PDF document or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Case] Elementary School: Floor Settlement Correction Work and Underfloor Void Filling Work

[Construction Case] Elementary School: Floor Settlement Correction Work and Underfloor Void Filling Work

The floor has sunk due to consolidation settlement! Voids (cavities) can be seen under the floor, and construction will be carried out by our company.

We would like to introduce a case where we performed "floor sinking correction work" and "underfloor void filling work." The construction site was an elementary school located in Gifu Prefecture. Due to consolidation settlement, the floors of the classrooms and art rooms in the school had sunk, and voids (cavities) were also observed under the floor. The area of the sinking correction was approximately 83m², with a maximum sinking amount of 64mm. Additionally, the maximum void amount was 40mm, and the construction period was 2 days. 【Case Overview】 ■ Area of sinking correction: Approximately 83m² ■ Maximum sinking amount: 64mm ■ Area of void filling: Approximately 165m² ■ Maximum void amount: 40mm ■ Area: Elementary school in Gifu Prefecture ■ Construction period: 2 days *For more detailed information about the case, please refer to the related links. For more details, please check the PDF materials or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Construction Case] Nursing Facility: Sunken Floor Correction Work

[Construction Case] Nursing Facility: Sunken Floor Correction Work

Up to 60mm of subsidence in the central Slavic region! Ground compaction reinforcement with the foaming pressure of polyurethane resin.

Here is an example of "floor sinking correction work" carried out at a nursing care facility located in Shizuoka Prefecture. Due to weak ground, ground subsidence occurred, resulting in sinking floors within the facility. During a preliminary survey, a maximum subsidence of 60mm was observed at the center of the slab, and a gap of 50mm was confirmed near the beams. Using the foaming pressure of polyurethane resin, the ground was compacted and reinforced, filling the gaps between the slab and the ground, while simultaneously correcting the floor sinking. 【Case Overview】 ■ Construction Area: Approximately 60m2 ■ Location: Nursing care facility in Shizuoka Prefecture ■ Construction Period: 1 day *For more detailed information about the case, please refer to the related links. For further details, please check the PDF materials or feel free to contact us.

  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Let's cherish Japan's landscapes! How about creating a photogenic spot in a beautiful location?

Let's cherish Japan's landscapes! How about creating a photogenic spot in a beautiful location?

Install bridges such as decks, girder bridges, and suspension bridges, as well as wooden paths and stairs, to become part of the landscape! We can also fulfill requests to create observation decks on steep slopes in the mountains.

Japan has many breathtaking landscapes that leave you in awe. However, the ground on Earth is diverse, ranging from soft ground like wetlands to hard rock formations, and there are both flat surfaces and steep slopes. Additionally, due to the variety of flora and fauna, construction that places a burden on the natural environment can potentially destroy these landscapes. The environmentally conscious simple foundation method, "Ecology Foundation," offers various foundation shapes tailored to different ground types and uses, making it possible to install walkways and decks in areas that were previously difficult to construct. Bridges such as decks, beam bridges, and suspension bridges, as well as walkways and stairs, have been installed, becoming part of the landscape. 【Product Lineup】 ■ Doozer Wood Recycled wood that is resistant to UV rays and rainwater, and does not decay. ■ Luminous Wood Features a glow-in-the-dark line that gently shines at dusk. ■ GRP Glass Reinforced Plastic Excellent weather resistance/lightweight material/extends the lifespan of facilities. ■ Civic Art Furniture ★ Exhibiting at "Tourism EXPO Japan 2024"! Please check the basic information for details. *For more information, please contact us or download the PDF.

  • wood

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For rubber rolls used in film and sheet manufacturing: 'IT68S-Smooth'

For rubber rolls used in film and sheet manufacturing: 'IT68S-Smooth'

Introducing products suitable for rubber rolls used in film and sheet manufacturing!

Are you looking for "rubber rolls for film and sheet manufacturing"? The "rubber rolls for film and sheet manufacturing" use RTV silicone rubber, which excels in release properties and heat resistance. Due to our unique processing method, there are no seams or joints that occur during general rubber molding, so the molding pattern does not transfer during film formation. Therefore, the suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and it is possible to adjust the formulation and rubber hardness according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks from seams or joints that occur during general rubber molding due to our unique processing method ■ Can be bonded with metals (such as existing cores) and general synthetic rubbers (EPT, NBR) ■ Re-coating of only the surface layer is possible during re-winding ■ Formulation design can be tailored to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Suitable for guide rolls: 'IT68S-Smooth'

Suitable for guide rolls: 'IT68S-Smooth'

Introducing products suitable for guide rolls! We design and propose various formulations.

Are you looking for a "guide roll"? By using silicone rubber rolls with excellent release properties, there is no adhesion of adhesive materials during transport. Therefore, a suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and it is possible to adjust the formulation and rubber hardness according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metal (existing core wires, etc.) and general synthetic rubber (EPT, NBR) ■ Re-coating of only the surface layer is possible during rewinding ■ Custom formulation design is possible according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
To the extended nip (MD・TD) roll! 'IT68S-Smooth'

To the extended nip (MD・TD) roll! 'IT68S-Smooth'

Introducing products suitable for extended nip (MD・TD) rolls! Designing and proposing various formulations.

Are you looking for "Extended Nip (MD・TD) Rolls"? By using silicone rubber with excellent release properties and heat resistance as the material, we can improve issues such as film tracking and wrapping that occur during the stretching of films and sheets, as well as the adhesion of resin additives. In this regard, a suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and it is possible to adjust the formulation and rubber hardness according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metals (existing cores, etc.) and general synthetic rubbers (EPT, NBR) ■ Re-coating of only the surface layer is possible during re-winding ■ Custom formulation design is possible according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Suitable for projects requiring high heat resistance" 'IT68S-Smooth'

"Suitable for projects requiring high heat resistance" 'IT68S-Smooth'

Introducing products suitable for projects requiring high heat resistance! Designing and proposing various formulations.

Are you looking for a highly heat-resistant rubber roll? The siloxane bonds in silicone rubber have a high bond energy and are chemically stable, providing heat resistance not found in synthetic rubber. It can be used for long periods at temperatures up to 150°C, and for short periods at temperatures between 200°C and 300°C. Therefore, the suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and the formulation and rubber hardness can be adjusted according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metal (existing cores, etc.) and general synthetic rubber (EPT, NBR) ■ Re-coating of just the surface layer is possible during re-winding ■ Custom formulation design is possible according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Suitable for projects requiring high chemical resistance" 'IT68S-Smooth'

"Suitable for projects requiring high chemical resistance" 'IT68S-Smooth'

Introducing products suitable for projects requiring high chemical resistance! Designing and proposing various formulations.

Are you looking for highly chemical-resistant rubber rolls? The siloxane bonds in silicone rubber have a high bond energy and are chemically stable, providing chemical resistance not found in synthetic rubber. It is not affected by chemicals other than strong acids and strong alkalis. Therefore, a suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and the formulation and rubber hardness can be adjusted according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metals (existing core wires, etc.) and general synthetic rubbers (EPT, NBR) ■ Reapplication of only the surface layer is possible during re-winding ■ Custom formulation design is possible according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Suitable for projects requiring high electrical insulation properties" 'IT68S-Smooth'

"Suitable for projects requiring high electrical insulation properties" 'IT68S-Smooth'

Introducing products suitable for projects requiring high electrical insulation! Designing and proposing various formulations.

Are you looking for "highly electrically insulating rubber rolls"? The siloxane bonds in silicone rubber have a high bond energy and are chemically stable, providing electrical insulation not found in synthetic rubber. It demonstrates electrical insulation properties over a wide temperature range and frequency spectrum. Therefore, a suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and the formulation and rubber hardness can be adjusted according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to unique processing methods ■ Can be bonded with metals (existing core wires, etc.) and general synthetic rubbers (EPT, NBR) ■ Reapplication of only the surface layer is possible during re-winding ■ Custom formulation design is possible according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Suitable for projects requiring high weather resistance" 'IT68S-Smooth'

"Suitable for projects requiring high weather resistance" 'IT68S-Smooth'

Introducing products suitable for projects requiring high weather resistance! Designing and proposing various formulations.

Are you looking for "high weather-resistant rubber rolls"? The siloxane bonds in silicone rubber have a high bond energy and are chemically stable, providing weather resistance not found in synthetic rubber. The physical properties remain almost unchanged even in reliability evaluation tests such as weather meter tests. Therefore, a suitable product is 'IT68S-Smooth'. This product is a roll lined with silicone rubber, and it is possible to adjust the formulation and rubber hardness according to the intended use. 【Features of IT68S-Smooth】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metals (existing core wires, etc.) and general synthetic rubbers (EPT, NBR) ■ Reapplication of only the surface layer is possible during re-winding ■ Formulation design tailored to the intended use is possible *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Suitable for embossed back rolls: 'IT68S-Matt'

Suitable for embossed back rolls: 'IT68S-Matt'

Introducing products suitable for embossed back rolls! Designing and proposing various formulations.

Are you looking for "Embossed Back Roll"? "Embossed Back Roll" improves the film trailing and winding issues that occur during the embossing process. In this regard, the suitable product is 'IT68S-Matt'. This product retains the characteristics of 'IT68S-Smooth' while allowing for adjustments to the surface roughness by incorporating a powder with a consistent particle size. Additionally, it features a roll lined with silicone rubber, enabling adjustments to the formulation and rubber hardness according to the intended use. 【Features of IT68S-Matt】 ■ Excellent release properties and heat resistance ■ Seamless processing ■ No processing marks such as seams that occur during general rubber molding due to a unique processing method ■ Can be bonded with metal (existing core wires, etc.) and general synthetic rubber (EPT, NBR) ■ Reapplication of the surface layer only is possible during rewinding ■ Custom formulation design according to the intended use *For more details, please refer to the PDF document or feel free to contact us.

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Suitable for adjusting the surface irregularities of film rolls" 'IT68S-Matt'

"Suitable for adjusting the surface irregularities of film rolls" 'IT68S-Matt'

Introducing products suitable for adjusting the surface irregularities of film rolls!

Are you looking for a method to adjust the uneven surface shape of film rolls? It is possible to adjust the unevenness of the roll surface by controlling the particle size of the filler in silicone rubber. In this regard, the suitable product is 'IT68S-Matt'. This product retains the characteristics of 'IT68S-Smooth' while allowing for the adjustment of surface roughness by incorporating a powder with a specific particle size. Additionally, rolls lined with silicone rubber can have their formulation and rubber hardness adjusted according to the intended use. **Features of IT68S-Matt** - Excellent release properties and heat resistance - Seamless processing - No processing marks such as seams that occur during general rubber molding due to a unique processing method - Can be bonded with metals (such as existing core wires) and general synthetic rubbers (EPT, NBR) - Reapplication of only the surface layer is possible during re-winding - Formulation design can be tailored to the intended use *For more details, please refer to the PDF document or feel free to contact us.*

  • Rubber

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Blog] Today also scaffolding, gadai, base

[Blog] Today also scaffolding, gadai, base

We hope to be discovered by customers seeking our technology! We can make a lot of frames.

Today, I am steadily working on the framework. At one company, it's called a base. At another company, it's called a framework. At another company, it's called a stand. At yet another company, it's referred to as a "kadai." In English, it seems to be referred to as trestle, abutment, frame, stand, or channel base. *For more details, you can view the related links on the blog. Please feel free to contact us for more information.*

  • Control Panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal processing [bearing] parts

Metal processing [bearing] parts

Please feel free to contact us even for just one part.

Milling Processing We can handle everything from small to large items with three horizontal milling machines (machining centers, NC, boring, general-purpose) and five vertical milling machines. By selecting between vertical and horizontal based on the workpiece shape, size, and processing content, we can perform efficient machining. We can accommodate a wide range of materials, including all metals, stainless steel, copper, aluminum, and plastics, and we can handle everything from single items to small lots and mass production.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.