Design and manufacturing services Product List and Ranking from 326 Manufacturers, Suppliers and Companies

Universal Slitter "SNR"

The sub-control panel displays the speedometer and winding length! It can be checked without having to move from the feed side.

The "SNR" is a versatile slitter that enhances cost performance and incorporates options from conventional models as standard. Technicians directly gathered requests from over 50 sites and renewed the design with a strong focus on usability in the field based on their feedback. It displays various support information for operators, such as "slip alarm for the drive roll," contributing to the prevention of operational mistakes and reduction of losses. 【Features】 ■ Standard adoption of multi-point tension control ■ In addition to conventional linear taper control, tension can be set arbitrarily from 2 to 10 points ■ The unwind arm can be fixed with a hand switch ■ Improves working posture, enhancing workability and safety ■ Displays speed and winding length on the auxiliary control panel ■ Increases information on the operation panel *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Speed Compact Universal Slitter 'eS!'

A future where humans and machines coexist, enhancing productivity! A work experience that is safe, secure, and innovative.

The "eS!" is a high-speed compact general-purpose slitter that is easy to relocate with casters and has been made 40% lighter compared to conventional models. It features a warning light that is visible from all directions and effective covering. With high-speed slitting at 500m/min, a unwind diameter of 1,000mm, a rewind diameter of 600mm, and a 40% reduction in operating steps, it aims to improve productivity. Additionally, various convenient options are available. 【Features】 ■ Safe, secure, and innovative work experience ■ Environmental compatibility and adaptation to new materials ■ Significant improvement in productivity ■ Lightweight and compact *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Universal Slitter "TNR"

Space-saving and ease of operation are prioritized! It adopts a single-touch roll with an air pressure method.

The "TNR" is a versatile slitter that not only features conventional linear taper control but also allows for arbitrary tension settings from 2 to 10 points. It adopts a single-touch roll with air pressure and expands the maximum winding diameter to 460mm, enabling high-speed winding. Additionally, it enhances cost performance by standardizing options available in conventional models, and the unwinding arm can be fixed with a hand switch. 【Features】 ■ Standard multi-point tension control ■ Manual EPC left-right fine adjustment ■ Unwinding arm can be fixed with a hand switch ■ Increased information on the operation panel ■ Focus on space-saving and operability *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1st Slitter "DXE" <Overhead Type>

Retractable contact method! It allows for proper pressure control that is not affected by product weight.

The "DXE" is an overhead type primary slitter that adopts a method of tilting the wound product down to a cart after winding, allowing for labor-saving and high productivity. Winding is done using a contact method, where the arm swings away according to the winding diameter, enabling control of appropriate contact pressure that is not affected by product weight. Additionally, it can be designed to fit the layout of the factory as an option, so please feel free to contact us when needed. 【Features】 ■ Adopts a method of tilting the wound product down to a cart ■ Allows for labor-saving and high productivity ■ Operating conditions can be set with any taper ■ Has a memory function for internal storage, making it easy to manage product parameters ■ Product discharge methods can be designed to fit the factory layout (optional) *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed slitter "LXR" <Dual-level horizontal moving type>

Always capable of applying pressure towards the center of the product! Achieves control from low pressure regardless of tension.

The "LXR" is a high-speed slitter with a two-tier horizontal moving design that features a memory function for internal storage, making it easy to manage variety parameters. The winding is done using a contact method, where the arm retreats horizontally according to the winding diameter. This allows for constant contact pressure directed towards the center of the product, enabling control from low contact pressure regardless of tension, significantly improving product quality. Additionally, we offer a wide range of options such as a round blade device, an automatic cutter positioning device, and an integrated ear winding machine. Please feel free to contact us. 【Features】 ■ Winding uses a contact method with the arm retreating horizontally according to the winding diameter ■ Wound products are equipped with a product unloading loader from the front (optional) ■ Minimal installation space required as products are not extracted from the side of the machine ■ Custom taper settings are possible ■ Memory function for internal storage makes it easy to manage variety parameters *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ear Winding Machine "EWXi"

Reduce the number of roll changes and improve workability! Easy to remove earwax rolls with the vertical winding structure!

The "EWXi" is a shaftless, toggle clamp type ear winding machine that makes core replacement easy. With improvements in winding method, tension control, ear pass, and control system, it achieves an industry-leading speed of 700 m/min (available only for EWXi-S). Additionally, taper winding is possible with servo synchronous control. We also offer various types of ear winding machines, so please feel free to contact us. 【Features】 ■ 50% increase in winding capacity ■ Easy core replacement with shaftless, toggle clamp method ■ Easy removal of ear waste rolls due to vertical winding structure ■ High-speed winding capability ■ Achieves consistent winding without unevenness through servo synchronous control ■ NEW dancer allows for non-stop winding of easily breakable ears *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ear Winding Machine "EW Series" <Standalone Type>

Just supply power and it's ready to use! It can quickly and low-tension wind the ears too!

We would like to introduce our independently installed ear winding machine, the "EW Series." It is ready for use immediately after supplying power. With a simple structure and advanced control through a vector motor, it can wind ears at high speeds with low tension. The weight of the "EW35-40VII-SCA" is approximately 120 kg, and its power is controlled by a dancer for speed regulation. We also have various other ear winding machines available, so please feel free to contact us when needed. 【Specifications (excerpt)】 ■ Model: EW35-40VII-SCA ■ Winding Speed: 0–400 m/min (normal use: 0–350 m/min) ■ Winding Diameter: Φ350 mm ■ Core Inner Diameter: 3 inches (Φ76.2±0.5 mm) ■ Power: Speed control by dancer *For more details, please refer to the PDF document or feel free to contact us.

Company：東伸
Price：Other

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for a Simple Loader Package

A simple loader package that allows loader control with the NC device of processing machines! Ideal for simple systems and mass production processing on automated production lines.

This is a simple automatic production system machining tool that integrates a machining center and a gantry loader, allowing the loader to be controlled by the NC device of the machining machine. It will be delivered in a form that incorporates the machining center and the gantry loader. We recommend it to customers who frequently change their factory layout on automated lines and those considering automatic transport of the M/C process, similar to lathes. Since the loader is assembled with the machine, it can be moved entirely with a lift, eliminating the need to disassemble and reassemble it each time it is moved, making layout changes and relocations easier. Automatic transport, which was not possible with just the M/C, is now achievable, leading to higher efficiency. A compact line that saves space is possible. Due to automation, stable quality and productivity can be ensured, making it ideal for mass production and processing of mass-produced parts. We have numerous delivery records in Japan and Southeast Asia. We provide reliable after-sales service, including regular inspections, repairs, and maintenance.

Company：キラ・コーポレーション
Price：Other

Machining Center
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Free Gift!] "FRP Q&A Collection"

We are offering a free collection of Q&A on FRP! It includes typical questions and answers.

Fiber-reinforced composites, unlike other structural materials (often homogeneous materials), exhibit their characteristics in the direction of the fiber orientation. Consequently, the design philosophy naturally changes, and the concept of homogeneous materials often cannot be applied. The "FRP Q&A Collection" includes representative questions and answers that have arisen in the context of processing and manufacturing contracts using fiber-reinforced composites. [Contents] ■1. About Terms ■2. About Costs/Production Period ■3. About Manufacturing ■4. About Material Properties ■5. About the Environment *For details, please request the materials or view the PDF data from the download.

Company：三協製作所本社事務所
Price：Other

fiber
Processing Contract
Contract manufacturing
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Horizontal moving rewind arm! Primary slitter for film production line.

By moving the winding arm horizontally, it enables high-precision winding with minimal changes in conditions. The winding arm is suspended, ensuring sufficient maintenance space.

We would like to introduce the "Primary Slitter for Film Coating Lines" that we handle. By horizontally moving the winding arm, it enables high-precision winding with minimal changes in conditions. The suspension type winding arm allows for sufficient maintenance space. Additionally, the AC vector inverter controls the tension at the unwinding section, the speed at the conveying section, and the tension at the winding section. 【Types of Heads】 ■ Air Expansion Type ■ Torque Expansion Type *For more details, please download the PDF or feel free to contact us.

Company：小林製作所
Price：Other

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Film Slitter Digest Catalog

A wide range of high-performance slitter machines for film, utilizing control technology and automation mechanisms!

This catalog features a variety of film slitter machines handled by Fuji Iron Works. Starting with the low-vibration and low-noise rear-mounted suspended automatic slitter "FSL-HB," we also offer the upper and lower mounted suspended automatic slitter "FSL-HV," and the friction shaft type slitter "FSL-FV." We provide high-performance machines utilizing our control technology and automation mechanisms across a wide range of industries. 【Featured Products (Excerpt)】 ■FSL-HB: Rear-mounted suspended automatic slitter Used as a primary slitter for plastic films ■FSL-HV: Upper and lower mounted suspended automatic slitter A precision slitter with a center drive type winding section arranged vertically ■FSL-FV: Friction shaft type center support slitter Suitable for the slitting process in film manufacturing and processing lines *This PDF document is a digest version. Please contact us if you need the full version.

Company：不二鉄工所
Price：Other

Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Secondary slitter for lithium-ion battery separators

Even higher precision than conventional machines! High-precision cutting and winding are possible! [Test cuts now being accepted]

The "WRS-35X10-FV" is a slitter for lithium-ion battery separators that employs a friction shaft in both the vertical and horizontal axes. It can accommodate a minimum product width of 30mm and achieves a minimum tension of 20N/m. Moreover, even at low tension, there is no misalignment of the winding core, allowing for high-precision winding. It is ideal for separators that require narrow and delicate winding. 【Features】 ■ Winding width ranges from 30 to 300mm, and winding tension ranges from 20 to 100N/m ■ High precision with a tension difference of less than 15% between each ring ■ The use of a winding shaft movement system ensures a constant film path length from the start to the end of winding, resulting in good edge quality of the wound product. ■ The internal structure is tubeless, making it maintenance-free. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：不二鉄工所
Price：Other

Other processing machines
Bag making machine/slitter
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating test specimen peeling blast machine

Remove the coating without using chemicals!

A wide selection of blasting methods is available! Various air blast machines, manual air blast machines, automatic air blast machines, AM type (manual type) / AML type (suction table type) / DML type (direct pressure table type).

Company：ニッチュー
Price：Other

Other processing machines
Dust collector
Design and manufacturing services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wide Wet Blast Machine "Omelette"

"Omlet," a manual wet blast device for processing large workpieces, compactly incorporates wet blast technology.

Features ――――――――――――――――――――――――――――――――― • Ergonomically designed equipment that does not cause fatigue even after long hours of operation. • Stainless steel body with truss structure, achieving strength and lightness. • Wide and bright work window that provides a sense of openness. • Includes a wiper that eliminates obstructions to visibility during processing. • Enhanced durability, allowing the use of various abrasives such as grinding and polishing materials. • Equipped with convenient casters for easy mobility.

Company：マコー
Price：1 million yen-5 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wet blasting equipment for surface treatment of large parts "MSB-3"

A device for manually performing surface treatment on large components placed on a turntable.

• Large parts such as bike frames, mufflers, and wheels can be fully processed indoors. • By combining a turntable and gun swing, full surface processing can be easily achieved. • Equipped with double doors for easy access to large workpieces.

Company：マコー
Price：5 million yen-10 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conveyor transport wet blast device "MiniPFE 100"

A compact cabinet packed with wet blasting and water washing drying can process both sides of board and sheet materials in a single pass.

Features ―――――――――――――――――――――――――――――――― - Continuous automatic wet blasting, rinsing, and drying of thin plate workpieces in a strip shape. - A compact, low-cost device that condenses functionality while maintaining the processing quality of wet blasting. - The blasting and rinsing sections are compact, allowing maintenance of the drive components simply by opening the conveyor cover. Additionally, the key components, such as the wide nozzle and pump, are designed for high durability.

Company：マコー
Price：10 million yen-50 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

6-axis multi-joint robot wet blast device "Robot Blast"

A device equipped with a 6-axis multi-joint robot and a servo-controlled rotating table. It supports detailed teaching and can process the intricacies of three-dimensional shapes.

Features ――――――――――――――――――――――――――――――――― - Supports detailed teaching with a multi-joint robot and servo-driven rotating table. - Capable of creating motion programs that operate within a specified numerical range multiple times with the press of a single switch. - Functionality limited to wet blast processing. Simple design with daily management focused solely on slurry concentration. - Uses high-wear-resistant parts in accordance with mass production equipment. Can be used as a medium-volume production machine if dedicated jigs are manufactured.

Company：マコー
Price：10 million yen-50 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Index rotary wet blast device

A processing cell device for small parts that allows continuous production by alternately switching between the blast section and the work set section, enabling work sets to be performed even during processing.

Features ――――――――――――――――――――――――――――――――― • By alternately switching between the blast section and the work set section in two stages, work can be set even during processing. • The X-axis drive allows the gun to move left and right, and the θ-axis drive tilts the gun in three positions, enabling processing of the top and sides of three-dimensional workpieces. • The safety door at the front closes during table inversion to prevent entrapment. • During inversion, a shutter that separates the blast section and the work set section opens and closes vertically, preventing the blast liquid from splattering into the work set section and keeping noise levels low.

Company：マコー
Price：10 million yen-50 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wet blast equipment for ultra-hard chip processing

A wet blast device for a semi-automatic processing cell that individually handles super hard chips (inserts) and processes them automatically one by one.

Features ――――――――――――――――――――――――――――――――― - Operators only need to replace the pallets for easy operation. - Supports a variety of workpieces with simple setup changes. - Automatic processing that targets while rotating the workpiece.

Company：マコー
Price：10 million yen-50 million yen

Other processing machines
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-slit machine for battery materials "Slitter DA700"

Achieving a precision of 5 microns! The cutting method can be selected according to the material with a battery material dedicated slitter.

The "Slitter DA700" is a multi-slit machine that can be selected for either gang-type or Goebel-type cutting methods. It is equipped with the HAKUSAN cutter stand, which allows for blade assembly in microns. The HAKUSAN cutter stand achieves high precision with radial and thrust runout of the axis below 5 microns, contributing to improved cutting quality. 【Features】 - Capable of cutting metal substrate composites such as lithium battery electrode materials with high precision and quality. - Equipped with sensors and a servo motor for axis position adjustment in the cutter bearing mechanism. - Automatic control minimizes clearance variation between blades. - Realizes easy operation. - Can be selected according to different materials such as anode materials, cathode materials, and separators. *For more details, please refer to the PDF document or feel free to contact us.

Company：白山工業
Price：Other

Other processing machines
others
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thin-cut slitter "PB150"

Supports high-precision cutting from a plate thickness of 0.05mm and a cutting width of 1.5mm! Stable cutting quality!

The PB150 is a four-axis slitter that utilizes a reel winding method to cut metal materials such as aluminum, nickel, and copper with high precision and high cutting quality for applications including tab materials for lithium-ion batteries, interconnectors for solar cell modules, and busbar materials. It is equipped with a cutter shaft that minimizes radial and thrust runout to the micron level. Thanks to friction winding with low tension controlled by air, it allows for uniform winding without applying load to the cutting materials. 【Features】 - High-precision cutter stand that achieves stable cutting quality - Adopts a reel winding method - Supports narrow and multi-strip cutting - Numerical management through digital control - Easy operation *For more details, please refer to the PDF document or feel free to contact us.

Company：白山工業
Price：Other

Other processing machines
others
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Composite material and film slitter

We have a wealth of achievements in a wide range of fields, including capacitors, FCCL, and separator materials!

This is a slitter for composite materials (including metal substrates) and film materials. It has a wide range of achievements in various fields such as capacitors, FCCL, and separator materials. We can also propose equipment for material development in laboratory settings. 【Features】 - Adjustable cutting surface - Compatible with various winding types - Achieves winding at low tension - Suitable for capacitor materials - Laboratory equipment proposals available - Choice of cutting methods *For more details, please check the related links below or contact us.

Company：白山工業
Price：Other

Other processing machines
Other machine tools
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrostatic Oil Purifier 【Rental, Sales, Oil Purification Service】

The savior of hydraulic maintenance!

1. It removes all waste that does not dissolve in oil, regardless of whether it is metal, non-metal, organic, or inorganic. 2. It removes a large amount of oxidized and deteriorated substances in oil that are difficult to filter out. The effects of 1 and 2 provide the following benefits: ● Extension of hydraulic machinery lifespan ● Significant extension of oil replacement period (10 years) ● Stabilization of productivity due to reduced troubles in hydraulic equipment ● Maintenance of high quality ● Reduction of maintenance costs ● Energy savings

Company：日本スピードショア
Price：Other

Other safety equipment
Design and manufacturing services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gantry loader

This is a gantry loader for machine tools. It is a high-rigidity type capable of carrying a workpiece weight of 10 kg. The standard handle is a double handle, which can accommodate various machining equipment layouts.

Company：新光エンジニアリング
Price：Other

Other industrial robots
Assembly Jig
Design and manufacturing services

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass craft and small parts surface treatment blast cabinet

Introducing blast cabinets for reliable technology in metal surface finishing!

We provide a safe and clean workspace for various types of blasting, such as air blasting and sandblasting. We achieve a wonderful finish on untreated metals, parts that cannot be machined, and plastic products. It is also ideal as a pretreatment to improve painting and adhesive strength. Even in a compact and user-friendly machine, the equipment and performance are comparable to large machines. It is fully equipped with functions necessary for blasting, including dust collectors, regulators, and air filters.

Company：厚地鉄工
Price：Other

Grinding Machine
Other surface treatment equipment
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dust separator equipped with blast cabinet

Cyclone-equipped blast cabinet

A blast cabinet equipped with a cyclone that has expanded versatility, capable of handling a wide variety of small items in small quantities to medium-sized heavy objects for surface treatment.

Company：厚地鉄工
Price：Other

Grinding Machine
Dust collector
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Glass craft and surface treatment processing: Blast cabinet, direct pressure type / suction type.

Equipped with powerful blasts and high-performance gear to handle all cleaning tasks!

A blast cabinet that provides a safe and clean workspace for various types of blasting, such as air blasting and sandblasting. It finishes untreated metals, parts that cannot be machined, and plastic products to a wonderful surface. It is also ideal as a pre-treatment to improve painting and adhesive strength. Even in a compact size, it has the same equipment and performance as larger machines. It is fully equipped with features necessary for blasting, including dust collectors, regulators, and air filters.

Company：厚地鉄工
Price：Other

Grinding Machine
Other surface treatment equipment
Design and manufacturing services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Design and manufacturing services Product List and Ranking from 326 Manufacturers, Suppliers and Companies | IPROS GMS

Design and manufacturing services Manufacturer, Suppliers and Company Rankings

Design and manufacturing services Product ranking