Fluorine resin coating - メーカー・企業75社の製品一覧とランキング

[Case Study on Problem Solving through Surface Treatment] Prevention of Adhesion to Conveying Rolls of Uncured Rubber

The effect of preventing sticking lasts a long time! It has become possible to reduce costs and working time.

■Concern The manufacturing process of weatherstrips involved transporting extruded rubber on rolls while heating and drying it in a furnace. Due to changes in the rubber material formulation for environmental measures and durability, it became necessary to process the rubber at higher temperatures than before, resulting in the rubber becoming sticky immediately after entering the furnace. ■Issues It was confirmed that when a common fluoropolymer coating was applied to the transport rolls, the rubber would stick to them like a suction cup. ■Effect of Surface Treatment By adopting our "Super TP Coating," we significantly reduced the rubber's stickiness and achieved a relatively soft contact surface. 【Key Points】 ■Purpose of Surface Treatment: Quality and operational stability, reduction of work loss, compliance with safety and environmental requirements ■Required Functions: Non-stick and release properties, long lifespan ■Adopted Treatment: Super TP Coating *For more details, please refer to the PDF document or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electrostatic Prevention Fluororesin Coating 'Safron(R) AP+'

Thick film processing that can be used for applications requiring corrosion resistance is possible. It also accommodates cases where static electricity is a concern and fluororesin coatings cannot be used.

■What is SafeLon(R) AP+? SafeLon(R) AP+ is an anti-static fluoropolymer coating that further enhances the functions of Yoshida SKT's anti-static fluoropolymer coating, "SafeLon(R)." ■Features of SafeLon AP+ By enhancing three functions: "release performance," "anti-static performance," and "blister resistance," improvements in corrosion resistance, non-stick properties, and coating lifespan can be expected. 【Upgraded Functions from SafeLon】 - Release Performance Improved release performance by creating a smoother surface. - Anti-Static Performance Achieves a leakage resistance value of 10^4-5Ω by directly dissipating generated charges to the substrate (metal). - Blister Resistance Reduces blister formation to about half that of conventional fluoropolymer coatings. *For more details, please refer to the PDF document or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Coating Example] Non-stick Performance Scissors

The special coated blade repels sticky substances!

The scissors coated by Yoshida SKT do not attract adhesive materials. The film thickness is 1 to 3 microns. The precision of the blade tip is maintained even after coating. Since the coating extends to the blade tip, it has a high level of non-stickiness all the way to the tip of the blade. They can be used for cutting various adhesive materials such as vinyl tape, double-sided tape, and cloth tape. Our company is capable of applying a coating that prevents adhesive materials from sticking to scissors. As a specialized manufacturer of surface treatment and industrial Teflon fluororesin coating, we provide problem-solving solutions that enhance customer satisfaction. 【Features】 ■ Film thickness: 1 to 3 microns ■ Maintains blade tip precision even after coating ■ High non-stickiness all the way to the tip of the blade *For more details, please refer to the PDF document or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Presentation of materials: A coating that surpasses fluorine and silicone in anti-adhesion properties.

For applications that cannot be satisfied with Teflon or silicone coatings! You can experience excellent release properties.

To prevent sticking of adhesive materials, fluororesin coatings (Teflon™ coatings) and silicone coatings are commonly used, but the following challenges may arise: [Challenge 1] Even with surface treatments claiming to prevent sticking, there was not much change. [Challenge 2] It started sticking unexpectedly quickly during use. [Challenge 3] Silicone coating transfers and causes defects in the bonding process (fluororesin did not provide sufficient effectiveness, leading to the choice of silicone). Recently, there has been an increase in customers needing solutions for more adhesive materials, such as wanting to release molten resins that do not fully solidify to shorten process time. Yoshida SKT has coatings that can improve such situations. In general fluororesin coatings, adhesive materials can stick due to various factors. In contrast, treatments that create a rough surface to reduce the contact area with adhesive materials are known. Our company has a unique technology to create convex surfaces using fluororesin and other materials, and we are now offering a kit to experience its effectiveness for free! ▼ You can apply from the "Yoshida SKT Official Site" below.

企業：吉田ＳＫＴ
価格：Other

Other Auto Parts

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

"Bi-Coat" with durability that surpasses fluororesin coatings.

For those troubled by peeling and wear of fluororesin coatings, we are currently offering free samples of 'Bicoat(R)', which excels in high hardness, wear resistance, release properties, and slip characteristics.

Do you have any concerns or requests regarding coatings for "preventing sticking" and "improving sliding"? - "Worried about coating deterioration or peeling" - "Want to extend the period until reprocessing" In production environments, there is always a demand for "damage-free" coatings. Bycoat® is a coating that pursues a balance of [durability and strength] and [anti-sticking and sliding effects]. [Purpose] To reduce the possibility of troubles such as "function degradation, foreign matter contamination, and defects caused by coating scratches and peeling," which can lead to decreased production efficiency. [Examples of Use] - Conveyance guides Provides sliding properties to prevent clogging of conveyed items. Reduces the risk of coating peeling and foreign matter contamination. - Heat seal type (sealer) Prevents sticking of the sealing member that presses the film with heat and coating peeling. - Molding type Contributes to improved release properties of resin product molds. Maintains dimensional accuracy, allows for low-temperature processing, and preserves mold quality. We are currently offering a free "Bycoat® Experience Kit." Please try the anti-sticking and sliding properties with actual materials. ▼ You can apply for the "Experience Kit" from the official Yoshida SKT website below.

企業：吉田ＳＫＴ
価格：Other

Other Auto Parts

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Presentation of Case Studies: Improve Conveying Equipment with Anti-Sticking Coating!

Waste hidden in conveying devices and processes. With convex coating, why not start improvements now for "profit enhancement" and "productivity increase"?

The unique convex coating technology of Yoshida SKT, which excels in "anti-sticking and slip resistance," will improve your transportation processes and contribute to increased profitability. OLD NORMAL - Current Production Site - - It's just how things are - It's working without issues - Someone can handle it each time This common sense has taken root and is often overlooked. If we don't change this situation to a "New Normal," profitability will not improve! NEW NORMAL - Correct Approach - - Prepare and consider measures before problems arise - Promote labor-saving, cleanliness, and automation through robotics - Reduce indirect work and allow workers to focus on their core tasks Yoshida SKT's convex coating will assist in transitioning to the New Normal in transportation! 1. What Makes Yoshida SKT's Convex Coating Different It can control a rich variety of convex formations according to conditions, ensuring a high level of improvement. 2. We Have Improvement Case Studies We have a proven track record with various transportation materials, improving diverse transportation troubles such as adhesives and rubber products. [We offer a collection of case studies on process improvements through coating] If you are interested, please request the "trial set" through the related link!

企業：吉田ＳＫＴ
価格：Other

Conveyor

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Proposal for Coating Selection: "Coating Performance Measurement Service" *Materials Available

To meet the need of wanting to confirm the effectiveness before coating, Yoshida SKT measures the coating surface with its unique know-how.

"I want to test the effectiveness of coatings using materials produced in-house in advance." "I am considering introducing coatings but am struggling with how to select them." To address these concerns, we propose measuring coating performance using our unique know-how, allowing for a comparative review before introducing coatings. Please feel free to consult us about preparing sample pieces. - Do you have any of these issues? During resin molding, resin sticks to molds or extruders, causing problems. After researching, I found that surface treatment is an effective measure to prevent sticking, but there are various types of resins and additives depending on the product, and I don't know which surface treatment to choose. - With our coating performance measurement service, you can use the materials you are currently using to check the adhesion with the coating, facilitating smooth real machine testing. ■ Measurement of Release Force of Melted Resin Pellets We measure the release force between melted resin pellets and the coated surface, allowing you to confirm the degree of peeling from the coating numerically. *For applications and to download materials, please visit the official Yoshida SKT website below.

企業：吉田ＳＫＴ
価格：Other

Contract measurement

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What are the differences between fluoropolymer coatings: PTFE, PFA, and FEP?

We will introduce the differences between fluoropolymer PTFE, PFA, and FEP.

Differences in Types and Characteristics of Representative Resins for Teflon Coating and Fluororesin Coating ■ Resin Name PTFE (Polytetrafluoroethylene) ■ Characteristics It has the highest continuous use temperature of 260°C, and in addition to heat resistance, it excels in non-stick and low friction properties. ■ Alternative Name Tetrafluoroethylene, 4F ■ Resin Name PFA (Perfluoroalkoxyalkane Polymer) ■ Characteristics An improved resin of PTFE, it has the same continuous use temperature of 260°C as PTFE. It has a low thermal melt viscosity, allowing for a continuous coating with fewer pinholes that could not be achieved with PTFE, making it the best-performing fluororesin for corrosion-resistant coatings. Additionally, PFA is superior in non-stick properties compared to PTFE for certain applications, making it suitable for high-temperature release coatings. ■ Resin Name FEP (Perfluoroethylene Propylene Copolymer) ■ Characteristics An improved resin of PTFE, but with lower heat resistance than PTFE. It can achieve a smooth coating with fewer pinholes through firing. ■ Alternative Name 4F6F, Tetra-hexafluoride

企業：吉田ＳＫＴ
価格：Other

Secondary Cells/Batteries

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Blister resistance increased by 10 times - Fluororesin lining 'MY Lining'

Achieves penetration resistance performance that greatly exceeds that of standard fluoropolymer lining. It demonstrates ten times the blister resistance compared to our standard PFA lining.

"MY Lining(R)" is a corrosion-resistant lining that significantly improves permeation resistance compared to standard PFA. It offers a lifespan that is expected to be several dozen times longer than that of conventional products (according to our coatings). It is suitable for environments that could not be used before and for places where the previous lifespan was unsatisfactory. It can also be lined in complex shapes such as eye plates and stirrers. 【Features】 ■ Dramatic improvement in permeation resistance performance (compared to our products) ■ Thick film processing is possible (MAX 2000μm) ■ Strong adhesion (vacuum resistance) ■ Seamless integrated processing ■ Can be lined in complex shapes such as eye plates and search machines *For more details, please refer to the PDF document or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

For those unsure about choosing surface treatment: Release and non-stick coatings *Materials available

Release properties are necessary. I want to reduce adhesion. I want to save on cleaning effort. It effectively meets all your requests! We introduce a surface treatment that excels in release and non-stick properties.

"Non-stick" refers to a property that makes it easy to release from strongly adhesive materials, meaning it either does not adhere or adheres with difficulty. Utilizing non-stick properties, we introduce surface treatments (coatings) that are effective for release applications, applications where adhesion needs to be minimized, and for simplifying cleaning. [Surface treatments chosen for non-stick and release purposes (partial list)] ■ Non-stick, lubricity, heat and cold resistance, chemical resistance, water and oil repellency, electrical properties 'Teflon (TM) fluoropolymer coating' ■ Release properties, high hardness, dimensional stability, lubricity, wear resistance 'Bicoat (R)' ■ Prevention of adhesion of highly adhesive materials 'Adhesive release coating series' 'MRS coating' (silicone-based coating) ■ Release of molten resin at high temperatures 'FSR coating' *For more details, please click to download the PDF or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluororesin coating "Types suitable for applications"

What types of fluororesins are suitable for applications such as non-adhesiveness, slip properties, and corrosion resistance? It is necessary to consider the characteristics and properties of the resin, as well as the selection of processing methods.

**Representative Types** ■ PTFE (Polytetrafluoroethylene) It has the highest continuous use temperature of 260°C and excels in non-stick and low friction properties. ■ PFA (Perfluoroalkoxyalkane Polymer) It has a low melt viscosity and can achieve a continuous coating with fewer pinholes than PTFE. It is the best-performing fluororesin for high-temperature corrosion resistance. ■ FEP (Perfluoroethylene Propylene Copolymer) An improved resin of PTFE, it has a lower continuous use temperature than PTFE but can achieve a smooth coating with fewer pinholes through sintering. ■ ETFE (Ethylene-Tetrafluoroethylene Copolymer) Due to its excellent mechanical properties, it is highly resistant to wear and is often used for anti-corrosion applications. ■ Modified Types ◎ High-temperature modified type ◎ Low-temperature modified type **Representative Processing Methods** ○ The enamel of fluororesin is applied using a painting machine or manually. ○ Fluororesin powder is applied using electrostatic or special painting machines. Coating processing is easily adaptable to complex shapes and is used in numerous industries. *For more details, please download the PDF and take a look.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Surface Treatment Case] Protecting Robots from Corrosion with Fluorine-based Corrosion-resistant Coating

What are the methods to enable robots to exist in harsh environments? We will introduce surface treatments (coatings) that implement corrosion prevention measures such as robot covers.

■Sites Requiring Surface Treatment - Environments where corrosion of robot arm covers is a concern - Sterilization environments using UV - Environments requiring cleanability ■Points of Innovation - By applying a corrosion-resistant coating to robot arm covers, we protect the metal from many acids, alkalis, solvents, and other chemicals. - The surface is resistant to degradation even in special environments such as UV, making it suitable for protecting robots. - It offers superior cleanability compared to metal, allowing for safe use even in conditions where food may adhere and create a breeding ground for bacteria. - It enhances efficiency in sites where "environment" and "atmosphere" have been bottlenecks, raising concerns about equipment deterioration. ■Examples of Coatings for Improving Robot Transport Adhesion Issues - Teflon Coating (Fluororesin Coating) - Antistatic Fluororesin Coating "Safron" - Antistatic Fluororesin Coating "Safron AP+" - Organic-Inorganic Composite Coating "Cerashield" - Fluorine-based Room Temperature Coating "Cerashield F" *For more details, please download the PDF or feel free to contact us.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Data Presentation] Super Engineering Plastics Property List

Presentation of a list of characteristics for PTFE, PFA, FEP, PCTFE, ETFE, ECTFE, PVDF, PBI, PEEK, PAI, PES, and PPS.

【Super Engineering Plastic Properties Documentation】 ■PTFE (Polytetrafluoroethylene) ■PFA (Tetrafluoroethylene-Perfluorovinyl Ether Copolymer) ■FEP (Tetrafluoroethylene-Hexafluoropropylene Copolymer) ■PCTFE (Chlorotrifluoroethylene Homopolymer) ■ETFE (Tetrafluoroethylene-Ethylene Copolymer) ■ECTFE (Chlorotrifluoroethylene-Ethylene Copolymer) ■PVDF (Polyvinylidene Fluoride Homopolymer) ■PBI (Polybenzimidazole) ■PEEK (Polyether Ether Ketone) ■PI (Polyimide) ■PAI (Polyamide Imide) ■PES (Polyether Sulfone) ■PPS (Polyphenylene Sulfide) *For more details, please download the PDF and refer to it. The property tables are for general characteristics and do not guarantee the physical properties by our company. Thank you for your understanding in advance.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Surface Treatment Solution Case] Release of UV-curable resin with a 1μm thin film surface treatment!

Achieving adhesion prevention for UV-curable resin used in display panel sealing! Ultra-thin film surface treatment 'Nano Process(R)'

■Concerns In the process of manufacturing display panels for TVs and other devices, sealing is done using UV-curable resin. However, the adhesive resin tends to stick to the jigs, leading to an increased likelihood of product defects. ■Requests The standard Teflon™ anti-adhesion coating results in a film thickness of several tens of micrometers, which causes fine irregularities to be transferred to the resin, raising concerns about the impact on products requiring precision. Additionally, the 400°C heat treatment during coating can cause warping of the jigs, and the UV light necessary for curing the sealing resin can compromise the adhesion of the coating, making it unusable. ■Solution Coating NanoProcess® TLS-200 ■Problem Resolution - Significant reduction in product defects due to prevention of resin adhesion - Improved precision leading to longer lifespan of jigs - Increased production efficiency *For details on the effects and background of the solution, please download the PDF or contact us.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Experimental footage] Excellent coating properties with non-stick, slip resistance, and corrosion resistance.

We will introduce the surface treatment functions provided by Yoshida SKT in an experimental video. The video explains the non-stick, slip, and corrosion resistance features in about 7 minutes.

Yoshida SKT responds to customer needs by providing surface treatment functions. - Non-stick (function to reduce sticking) Video playback: 0:00 - (For those in a hurry, please start playback from this time) - Low friction (function to enhance slipperiness) Video playback: 2:33 - (For those in a hurry, please start playback from this time) - Corrosion resistance (function to reduce corrosion) Video playback: 4:42 - (For those in a hurry, please start playback from this time) These are introduced through easy-to-understand experimental videos. With Yoshida SKT, we can accommodate a wide variety of substrates and offer suggestions from hundreds of types of coating materials. This broadens the range of coatings that customers can choose from. In addition to functions such as "reducing adhesion of sticky substances" and "improving slipperiness," we also respond meticulously to the varying needs and environments of each customer, such as "requiring precision" or "requiring heat resistance," to achieve reliable effects.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluorine resin coating - メーカー・企業75社の製品一覧とランキング

Fluorine resin coatingのメーカー・企業ランキング

Fluorine resin coatingの製品ランキング

Fluorine resin coatingの製品一覧

[Case Study on Problem Solving through Surface Treatment] Prevention of Adhesion to Conveying Rolls of Uncured Rubber

Electrostatic Prevention Fluororesin Coating 'Safron(R) AP+'

[Coating Example] Non-stick Performance Scissors

Presentation of materials: A coating that surpasses fluorine and silicone in anti-adhesion properties.

"Bi-Coat" with durability that surpasses fluororesin coatings.

Presentation of Case Studies: Improve Conveying Equipment with Anti-Sticking Coating!

Proposal for Coating Selection: "Coating Performance Measurement Service" *Materials Available

What are the differences between fluoropolymer coatings: PTFE, PFA, and FEP?

Blister resistance increased by 10 times - Fluororesin lining 'MY Lining'

For those unsure about choosing surface treatment: Release and non-stick coatings *Materials available

Fluororesin coating "Types suitable for applications"

[Surface Treatment Case] Protecting Robots from Corrosion with Fluorine-based Corrosion-resistant Coating

[Data Presentation] Super Engineering Plastics Property List

[Surface Treatment Solution Case] Release of UV-curable resin with a 1μm thin film surface treatment!

[Experimental footage] Excellent coating properties with non-stick, slip resistance, and corrosion resistance.

Fluorine resin coatingの関連カテゴリ