Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 332 items
This is a hardness tester for rubber and plastics that can measure soft plastics, rubber, synthetic rubber, silicone, vinyl, felt, leather, and more.
A pocket-sized durometer can primarily measure softer rubber and plastic.
It can be used for soil profile measurements as it directly indicates important engineering properties such as soil compaction strength, shear strength, and cohesion in situ.
- It directly indicates important engineering properties such as soil compaction strength, shear strength, and cohesion in situ, making it useful for soil profile measurements. - Reliable data can also be obtained for determining the bearing capacity and stability of the subsoil.
This is a thermometer that can measure temperature non-contact using an infrared radiation thermometer, and can be connected to various types of K-type thermocouples to accommodate a wide range of temperature measurements.
The measured temperature is displayed on an easy-to-read LCD with a backlight, showing temperatures in 0.1°C increments (ranging from -9.9 to +199.9°C). The non-contact temperature can have its emissivity adjusted between 0.01 and 1.00 to match the measured object, and the distance coefficient is 11:1 to ensure accurate measurements of distant objects. It can display the maximum temperature, minimum temperature, the deviation between the maximum and minimum temperatures, and the average value during measurement. For food factories, we can also deliver the Raytemp set, which includes a piercing temperature sensor and probe disinfecting wipes (70 pieces) in a hard case. *Please choose either the Raytemp (with a 1m bare wire sensor) or the RayTemp set (with a piercing temperature sensor, probe disinfecting wipes (70 pieces), and a hard case) from the options below.*
You can measure the moisture content of copy paper and cardboard base paper.
You can measure the moisture content of copy paper and cardboard base paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three models based on the measurement target and application: - HK-300-1 with grip sensor, - HK-300-2 with conductive rubber sensor, - HK-300-3 with constant pressure sensor.
The Yamamoto-type soil hardness meter is an instrument that measures soil hardness, which is one of the physical properties of soil.
When a cone is pressed vertically into a flat-cut cross-section, both the depth of cone penetration and the corresponding soil reaction force (spring compression) are measured simultaneously as variables, from which the theoretical hardness value (kg/cm²) is calculated. Due to this unique principle, a wide range of hardness from soft soils to soft rocks can be accurately measured in a matter of seconds. Additionally, it can be universally applied to general soft materials other than soil.
By adopting a notch filter, noise is reduced. This device detects weak leakage sounds and identifies leaks by confirming and comparing them with sound and numerical values.
The sound of water leakage is characterized by various noises and a mixture of complex sounds. Human hearing plays a significant role in this judgment. Consequently, devices have been developed that aim to capture sounds as close as possible to leakage sounds or to assess sounds using meters. The HG-10A incorporates both of these functions. In recent years, water leakage in main drainage pipes has decreased due to pipe renovation projects, achieving a high level of effectiveness. In contrast, minor leaks in water supply pipes and within buildings have increased, making investigation work very challenging. This device detects such weak leakage sounds and identifies leaks by confirming and comparing sounds and numerical values. Sensors and filters have been adjusted to be particularly suitable for detecting leaks in water supply pipes such as VP pipes and polyethylene pipes. It employs an "easy-to-read meter" and a "filter that allows for easy-to-hear sounds," enhancing the detection efficiency of the device.
Low-speed measurement can instantly measure speeds from 8 km/h to 322 km/h. It can be used as a speedometer for low-speed vehicles at construction sites and factories.
A function has been added to reduce noise, such as electromagnetic waves, which can cause malfunctions, allowing for more reliable measurements. It can be used for speed measurement of slow vehicles in environments prone to noise, such as construction sites, factory premises, and game centers.
This is an easy-to-use domestic water leak detection device that combines a newly developed compact high-performance microphone with a higher-end digital amplifier.
It is equipped with a microprocessor that automatically eliminates noise.
This is a dedicated device for measuring light wind speed, a single-function anemometer. Measurement range: wind speed 0.05 to 2.00 m/s (1 range).
Simultaneous analog output is also possible, allowing for a wide range of applications beyond air conditioning. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price for the sensor probe alone.*
It is easy to separate from the display section with certification.
It supports a 3-way power supply: rechargeable battery, AC adapter, and dry batteries (dry batteries are not included). *This device has received type approval.* *Please choose the type according to your needs.* - PB-30 (capacity 15/30kg) - PB-60 (capacity 30/60kg) - PB-150 (capacity 60/150kg)
This is a soot concentration meter that evaluates the smoke density of combustion exhaust gases and checks combustion efficiency.
By drawing in combustion exhaust gases, we compare the smoke and smoke scale adhered to the filter paper to identify the smoke density. It can be used with all oil burners and can accurately measure smoke density within one minute. It is widely accepted as a world standard method for smoke testing of oil burners and has gained trust through years of proven performance in the burner industry.
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
There is a very high correlation between the measurement values according to JIS standards and the wastewater from various business sites.
This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.
Wind speed, temperature at two points, temperature difference between the two points, and humidity can be measured as the five elements of air conditioning.
The display is a large, bright LED screen.
Clearly read the numbers on the LCD screen with a backlight.
This is a waterproof type, making it ideal for outdoor use. This device is equivalent to IP54 for dust and water resistance, so it can be used with wet hands. It can be safely used in places with a lot of dust on site.
It is a digital walking measure that allows for easy distance measurement while walking.
We offer three types to suit your needs. From left to right, they are DWS-160B/DWS-160C/DWS-160W. Please select one type from the options below based on your application and functionality. - DWS-160B - DWS-160C - DWS-160W (two-wheel type)
The sensor probe is telescopic, making it easy to measure wind speed and temperature at high altitudes.
It comes with maximum and minimum value functions. Diverse display formats: m/s, km/s, mile/h, knots, °C, °F.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring instrument, COD test tubes (25 pieces, with one set each for low range and medium range), reactor RD125, and vial stand.
Easily measure impact force on-site! A compact and lightweight measuring device compatible with force and pressure measurements.
The "CBSF-75 Series" is a collaborative robot impact force measuring device suitable for measuring impact forces in the field, such as during product development testing and pre-operation inspections of robots. We offer two types of devices: the impact force measurement "CBSF-75 Basic" and the gripper measurement "CBSF-75 Gripper." Additionally, we have the measurement cart "KDMG-STD2," which simulates the human body for measuring impact forces on body parts as specified in ISO/TS15066. This measurement cart is used by securing the collaborative robot impact force measuring device "CBSF-75 Basic" or the CoboSafe series measuring devices. 【Features (KDMG-STD2)】 ■ The collaborative robot impact force measuring device can be fixed at any height from the calf to the neck to match human body parts. ■ The stopper can be set to fixed or free. ■ The top plate can also accommodate "CBSF-75 Basic (F-500 Basic)" and CoboSafe series devices. *Additional fixed mounts are required. *For more details, please refer to the PDF document or feel free to contact us.
Designed as part of the CoboSafe series! Ideal for measuring gaps.
The "CBSF-XS" is a collaborative robot impact force measurement device that is suitable for measuring the transitional and quasi-static forces of collaborative robots, as well as the impact forces in the gaps of collaborative robots. Due to its low measurement surface height, it can measure impact forces with a width of 10mm or more. The bright light signal transmitter provides information about the operational status of the measurement device, so there is no need to check the display. 【Features】 ■ Ultra-compact ■ Built-in display ■ Bright and easy-to-read status indication ■ Easy operation ■ User-friendly menu *For more details, please refer to the PDF document or feel free to contact us.
Rental Measuring Instruments (Electrical) Used Equipment Sales List December 2025 - January 2026 Edition
We sell rental inventory equipment from Orix Rentec Co., Ltd. at reasonable prices. We have a variety of products that meet our customers' needs, so please take advantage of our services.
Ultra-small (13 x 15 mm), low power consumption
GPS/QZSS + GLONASS + Galileo + SBAS Antenna Module 【Specifications】 ◆ Model: YIC51513PGMGG-33 ◆ Dimensions: 13 x 15 x 6.8 mm ◆ Internal Memory: FLASH ◆ VCC: 3.3V ◆ PPS ◆ Interface: UART
A measuring device compatible with various types from excimer ultraviolet to LED ultraviolet!
Quark Technology Co., Ltd.'s illuminance monitor supports a variety of applications from excimer ultraviolet to LED ultraviolet. There are three types of monitors based on measurement wavelength, each used for measuring different wavelengths. With a low price, easy operation, and compact size, we encourage you to make a purchase. 【Features】 ■ Supports excimer ultraviolet to LED ultraviolet ■ Simple operation ■ Compact size ■ Low price *For more details, please refer to the catalog or feel free to contact us.
Measurement can be performed just by placing it on the surface of the object being measured!
The "portable contact angle meter" is a measuring instrument that can measure the surface of objects such as wafers and photomasks before and after surface treatment simply by placing it on the surface. There is no need to cut the sample during measurement, and it can measure samples with small surface areas or curved surfaces. When using this instrument for measurement, the sample, which is the object of measurement, must have a measurement area larger than 10mm x 16mm. 【Features】 ■ Measurement is possible just by placing it on the surface of the object ■ No need to cut the sample ■ Can measure even with small surface areas ■ Can measure even with curved surface areas *For more details, please refer to the catalog or feel free to contact us.
Waterproof performance IPX7 makes it resistant to water! Models that can store 99 measurement data are also available.
We would like to introduce the "Center Temperature Meter" that we handle. We offer a rich lineup, including the multifunctional, high-precision "AD-5604C" with interchangeable temperature probes and the "AD-5628," which features a simple stopwatch function. Additionally, we also have the integrated thermocouple temperature sensor "AD-5605P" and the separate sensor type "AD-5605C." 【AD-5604C Features】 ■ Multifunctional, high precision ■ Interchangeable temperature probes ■ Data memory: up to 99 entries ■ Upper/lower temperature alarm function ■ Alarm setting storage: up to 99 sets *For more details, please download the PDF or feel free to contact us.
It is widely used to inspect the spline section used for the connection between the rotating axis and the components!
We would like to introduce our "spline gauge." The "spline" is used to connect rotating shafts and components to transmit large torque, and our product is widely used for inspecting the spline section. Please feel free to contact us when you need assistance. 【Features】 ■ Widely used for inspecting the spline section *For more details, please refer to the PDF document or feel free to contact us.
Measured in 5 time slots! One unit can record temperature and humidity changes between day and night! Suitable for manufacturing sites as well.
The Fisca temperature and humidity device is a temperature management tool that can display and record temperature and humidity changes over five preset time periods. The lamp color changes every 20 seconds, displaying temperature when red and humidity when blue. It can also show the temperature and humidity set for the current time and the last five arbitrary times, allowing you to check and manage the temperature and humidity measured the previous night the following morning. The recorded temperature and humidity can be reset at your desired time. Although it was developed for agricultural use, it can also be utilized for temperature management in manufacturing sites. *For more details, please contact us. 【Features】 ■ Lightweight and easy to install due to the waterproof plastic box ■ Easy-to-read screen even in the dark ■ Extension power cord (optional) ■ 50m temperature sensor cord (optional) *For more details, please refer to the catalog. Feel free to contact us as well.
Shape: Square bar / Round rod / Tapping electrode, Material: Copper / Tungsten, etc. widely available.
【Shape】 We offer a wide range of options, including square bars, round rods, and tapping (screws). 【Material】 Copper tungsten alloy and silver tungsten alloy generally demonstrate excellent machining performance when surface accuracy and dimensional accuracy are required. They maintain stable discharge, have a fast machining speed, and reduce electrode wear. *For more details, please visit our website from the "Related Links."
Defects in expansion can also be measured! SemiScope enables spectral line analysis.
The "SemiScope PLIS-TEC" is a groundbreaking measurement device for the study of crystal defects using photoluminescence (PL). It allows for the simultaneous measurement of spectra from a selected line segment in a PL imaging image, dividing that segment into 1000 points. Additionally, by spectrally analyzing the line segment, it can accurately measure spectra even for defects that are difficult to pinpoint, such as base plane transitions. 【Features】 ■ Supports spectral line analysis ■ For the study of crystal defects ■ The excitation light density is approximately three orders of magnitude lower than that of conventional PL spectral measurements ■ Capable of measuring extended defects ■ Accurately measures spectra even for defects that are difficult to locate *For more details, please refer to the PDF document or feel free to contact us.
