Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
106～120 item / All 333 items
In addition to measuring the absorbance of nitrogen, phosphorus, etc., pH (electrode type) and turbidity can also be measured.
It is a spectrophotometer that excels in accuracy and reproducibility, and is easy to operate.
There is a very high correlation between the measurement values according to JIS standards and the wastewater from various business sites.
This measurement method uses the same reaction conditions for pollutants and potassium permanganate as JIS K 0102, and the volumes of the sample and reagents are conducted at one-twentieth of the JIS method. Heating at 100°C for 30 minutes is performed using a reactor instead of a water bath, and the amount of consumed permanganate ions is determined by measuring the decrease in absorbance with a photoLab 6100 water quality meter instead of using titration, displaying the COD concentration. Since the reaction conditions of this method are exactly the same as those of the JIS method, there is a very high correlation between the measurement values obtained by the JIS method and those obtained using the photoLab 6100.
It is a micro viscometer that can measure with approximately 100μl of sample.
It is convenient to carry due to its compact size. The reduction in research and development costs due to savings on raw materials and sample disposal costs, as well as cost reductions expected from sample savings in lot inspections of incoming raw materials and products. Please select one type from the options below using the sensor: - For low viscosity (HA01-01) 0.2 – 100 mPa.s - For medium viscosity (HB02-01) 80 – 5,000 mPa.s - For high viscosity (HC02-01) 400 – 20,000 mPa.s
Wind speed, temperature at two points, temperature difference between the two points, and humidity can be measured as the five elements of air conditioning.
The display is a large, bright LED screen.
Clearly read the numbers on the LCD screen with a backlight.
This is a waterproof type, making it ideal for outdoor use. This device is equivalent to IP54 for dust and water resistance, so it can be used with wet hands. It can be safely used in places with a lot of dust on site.
It is a digital walking measure that allows for easy distance measurement while walking.
We offer three types to suit your needs. From left to right, they are DWS-160B/DWS-160C/DWS-160W. Please select one type from the options below based on your application and functionality. - DWS-160B - DWS-160C - DWS-160W (two-wheel type)
The sensor probe is telescopic, making it easy to measure wind speed and temperature at high altitudes.
It comes with maximum and minimum value functions. Diverse display formats: m/s, km/s, mile/h, knots, °C, °F.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring instrument, COD test tubes (25 pieces, with one set each for low range and medium range), reactor RD125, and vial stand.
Ultra-small (13 x 15 mm), low power consumption
GPS/QZSS + GLONASS + Galileo + SBAS Antenna Module 【Specifications】 ◆ Model: YIC51513PGMGG-33 ◆ Dimensions: 13 x 15 x 6.8 mm ◆ Internal Memory: FLASH ◆ VCC: 3.3V ◆ PPS ◆ Interface: UART
A measuring device compatible with various types from excimer ultraviolet to LED ultraviolet!
Quark Technology Co., Ltd.'s illuminance monitor supports a variety of applications from excimer ultraviolet to LED ultraviolet. There are three types of monitors based on measurement wavelength, each used for measuring different wavelengths. With a low price, easy operation, and compact size, we encourage you to make a purchase. 【Features】 ■ Supports excimer ultraviolet to LED ultraviolet ■ Simple operation ■ Compact size ■ Low price *For more details, please refer to the catalog or feel free to contact us.
Measurement can be performed just by placing it on the surface of the object being measured!
The "portable contact angle meter" is a measuring instrument that can measure the surface of objects such as wafers and photomasks before and after surface treatment simply by placing it on the surface. There is no need to cut the sample during measurement, and it can measure samples with small surface areas or curved surfaces. When using this instrument for measurement, the sample, which is the object of measurement, must have a measurement area larger than 10mm x 16mm. 【Features】 ■ Measurement is possible just by placing it on the surface of the object ■ No need to cut the sample ■ Can measure even with small surface areas ■ Can measure even with curved surface areas *For more details, please refer to the catalog or feel free to contact us.
It is widely used to inspect the spline section used for the connection between the rotating axis and the components!
We would like to introduce our "spline gauge." The "spline" is used to connect rotating shafts and components to transmit large torque, and our product is widely used for inspecting the spline section. Please feel free to contact us when you need assistance. 【Features】 ■ Widely used for inspecting the spline section *For more details, please refer to the PDF document or feel free to contact us.
Measured in 5 time slots! One unit can record temperature and humidity changes between day and night! Suitable for manufacturing sites as well.
The Fisca temperature and humidity device is a temperature management tool that can display and record temperature and humidity changes over five preset time periods. The lamp color changes every 20 seconds, displaying temperature when red and humidity when blue. It can also show the temperature and humidity set for the current time and the last five arbitrary times, allowing you to check and manage the temperature and humidity measured the previous night the following morning. The recorded temperature and humidity can be reset at your desired time. Although it was developed for agricultural use, it can also be utilized for temperature management in manufacturing sites. *For more details, please contact us. 【Features】 ■ Lightweight and easy to install due to the waterproof plastic box ■ Easy-to-read screen even in the dark ■ Extension power cord (optional) ■ 50m temperature sensor cord (optional) *For more details, please refer to the catalog. Feel free to contact us as well.
Shape: Square bar / Round rod / Tapping electrode, Material: Copper / Tungsten, etc. widely available.
【Shape】 We offer a wide range of options, including square bars, round rods, and tapping (screws). 【Material】 Copper tungsten alloy and silver tungsten alloy generally demonstrate excellent machining performance when surface accuracy and dimensional accuracy are required. They maintain stable discharge, have a fast machining speed, and reduce electrode wear. *For more details, please visit our website from the "Related Links."
Defects in expansion can also be measured! SemiScope enables spectral line analysis.
The "SemiScope PLIS-TEC" is a groundbreaking measurement device for the study of crystal defects using photoluminescence (PL). It allows for the simultaneous measurement of spectra from a selected line segment in a PL imaging image, dividing that segment into 1000 points. Additionally, by spectrally analyzing the line segment, it can accurately measure spectra even for defects that are difficult to pinpoint, such as base plane transitions. 【Features】 ■ Supports spectral line analysis ■ For the study of crystal defects ■ The excitation light density is approximately three orders of magnitude lower than that of conventional PL spectral measurements ■ Capable of measuring extended defects ■ Accurately measures spectra even for defects that are difficult to locate *For more details, please refer to the PDF document or feel free to contact us.
